CAS 64742-49-0
:Naphtha (Erdöl), leicht hydrobehandelt
Beschreibung:
Naphtha (Erdöl), leicht hydrobehandelt, mit der CAS-Nummer 64742-49-0, ist ein komplexes Gemisch von Kohlenwasserstoffen, das aus der Raffination von Rohöl stammt. Es zeichnet sich durch seine leichte, flüchtige Natur aus und besteht typischerweise aus aliphatischen und aromatischen Kohlenwasserstoffen. Diese Substanz ist farblos bis blassgelb und hat eine niedrige Viskosität, was sie für verschiedene Anwendungen geeignet macht, einschließlich als Lösungsmittel, Brennstoff und Ausgangsstoff in petrochemischen Prozessen. Der hydrobehandelte Aspekt zeigt an, dass sie einen Behandlungsprozess durchlaufen hat, um Verunreinigungen wie Schwefel- und Stickstoffverbindungen zu entfernen, wodurch ihre Stabilität verbessert und ihre Umweltauswirkungen verringert werden. Naphtha ist hochentzündlich und sollte mit Vorsicht behandelt werden, wobei Sicherheitsprotokolle beachtet werden müssen, um eine Exposition und Zündung zu verhindern. Ihr Siedepunkt liegt normalerweise zwischen 30 °C und 200 °C, was eine schnelle Verdampfung ermöglicht, was in Anwendungen, die ein schnelles Trocknen oder Lösungsmittelwirkung erfordern, von Vorteil ist. Insgesamt wird hydrobehandelte leichte Naphtha für ihre Vielseitigkeit und Effektivität in industriellen Anwendungen geschätzt.
Formel:Unspecified
Synonyme:- Alkanes, C5-8
- Benzine
- Benzoline
- Bp 2
- Canadol
- Hydrotreated light naphtha (petroleum)
- Isoparaffinic hydrocarbons
- Ligroine
- Mineral spirits
- Naphtha
- Naphtha (petroleum), hydrotreated light
- Naphtha, VM & P
- Naphtha, ligroine
- Naphtha, varnish makers' and painters'
- Painters' naphtha
- Petrolether
- Petrolether 40-70
- Petrolether 70-100
- Petroleum Benzine
- Petroleum benzin
- Petroleum ether
- Petroleum ether 100-120
- Refined solvent naphtha
- Skellysolve F
- Skellysolve G
- Straight Run Gasoline
- V.M. and P. naphtha
- VM and P Naphtha
- Varnish makers' and painters naphtha
- Varnish makers' naphtha
- Varnish makers' naphtha and painters' naphtha
- Varnish marker's naphtha
- Weitere Synonyme anzeigen
Sortieren nach
Der Reinheitsfilter ist nicht sichtbar, weil die aktuellen Produkte keine zugeordneten Reinheitsdaten für die Filterung besitzen.
10 Produkte.
Reagecon Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether
CAS:This Reagecon Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and Oxygenate compounds in Gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. Description | Concentration: - DIPE: 20 %. - Petroluem Ether: 66 %. - Tert-Butanol: 14 %.Farbe und Form:LiquidReagecon Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether
CAS:This Reagecon Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and Oxygenate compounds in Gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. Description | Concentration: - Methanol: 6 %. - 3-ET-Toluene: 5.2 %. - Toluene: 7 %.Farbe und Form:LiquidReagecon Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether
CAS:This Reagecon Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing Benzene levels in Gasoline in accordance with the International Standard ASTM D6277 and EN 238, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. Description | Concentration: - Benzene: 1 %. - Mesitylen: 7 %. - Pr-Benzene: 7 %.Farbe und Form:LiquidReagecon Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether
CAS:This Reagecon Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and Oxygenate compounds in Gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. Description | Concentration: - Ethanol: 11 %. - MTBE: 20 %. - Petroluem Ether: 69 %.Farbe und Form:LiquidReagecon Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether
CAS:This Reagecon Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and Oxygenate compounds in Gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. Description | Concentration: - ETBE: 20 %. - Methanol: 6 %. - Petroleum Ether: 54 %. - TAME: 20 %.Farbe und Form:LiquidReagecon Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether
CAS:This Reagecon Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing Benzene levels in Gasoline in accordance with the International Standard ASTM D6277 and EN 238, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. Description | Concentration: - Benzene: 0.5 %. - Toluene: 15 %.Farbe und Form:Liquid
