Elastómeros

<p>2-Part 1:1 Kit<br>1 kg kit – contains 500 g part A (base), 500 g part B (cross-linker)6 kg kit – contains 3000 g part A (base), 3000 g part B (cross-linker)<br></p>

<p>2-Part 1:1 Kit<br>1 kg kit – contains 500 g part A (base), 500 g part B (cross-linker)6 kg kit – contains 3000 g part A (base), 3000 g part B (cross-linker)<br>Gelest®OE41: 1.41 Refractive Index 2-Part Silicone Elastomer<br>Gelest OE41 is a flexible, optically clear general purpose molding, encapsulation, and coating compound with a RI of 1.41. The low viscosity of the platinum catalyzed mix, long pot-life at room temperature, and moderate cure temperature make this extremely useful in laboratory, prototype, and small scale production run applications.<br>Cured Gelest®OE41 Properties<br>Refractive Index (25°C): 1.41Tensile Strength: &gt;2.0 MPaElongation @ Break: 140-200%Durometer, Shore A: 15-30<br></p>

<p>2-Part 10:1 Kit<br>100 g SpeedMixer™ Kit – contains 91 g part A (base), 9 g part B (cross-linker) in FlackTek SpeedMixer™ cups 220 g kit – contains 200 g part A (base), 20 g part B (cross-linker)1.1 kg kit – contains 1000 g part A (base), 100 g part B (cross-linker)<br>Gelest® RG01: 2-Part RTV Silicone Elastomer<br>PP2-RG01 is a flexible, high definition, clear molding and encapsulation PDMS. The moderate viscosity of the platinum-catalyzed mix and long pot-life at room temperature make this extremely versatile for a broad range of applications including microfluidics and prototyping.<br>Cured PDMS Properties<br>Tensile Strength: 5.5-7.0 MPaElongation: 80-100%Durometer, Shore A: 45-60<br>Related Products<br>Gelest® RG03: Hydrophilic Reprographic SiliconeGelest® RG05: Reprographic Silicone, Low Volatility<br></p>

<p>Alkyl Silane - Conventional Surface Bonding<br>Aliphatic, fluorinated aliphatic or substituted aromatic hydrocarbon substituents are the hydrophobic entities which enable silanes to induce surface hydrophobicity. The organic substitution of the silane must be non-polar. The hydrophobic effect of the organic substitution can be related to the free energy of transfer of hydrocarbon molecules from an aqueous phase to a homogeneous hydrocarbon phase. A successful hydrophobic coating must eliminate or mitigate hydrogen bonding and shield polar surfaces from interaction with water by creating a non-polar interphase. Although silane and silicone derived coatings are in general the most hydrophobic, they maintain a high degree of permeability to water vapor. This allows coatings to breathe and reduce deterioration at the coating interface associated with entrapped water. Since ions are not transported through non-polar silane and silicone coatings, they offer protection to composite structures ranging from pigmented coatings to rebar reinforced concrete. A selection guide for hydrophobic silanes can be found on pages 22-31 of the Hydrophobicity, Hydrophilicity and Silane Surface Modification brochure.<br>Glassclad® 18; Octadecyl functional silane<br>20% in t-butanol/diacetone alcoholPour point: 4 °CCoefficient of friction of treated glass surface: 0.2 - 0.3Surface resistivity of treated surface: 1.2 x 1013 ohmsHazy, amber liquidWater-dispersible hydrophobic surface treatmentSurface conductivity of glass substrates is reduced by application of Glassclad® 18Surface arc-tracking is eliminated on fluorescent light bulbsReduces blood protein adsorption<br></p>

<p>2-Part 1:1 Kit<br>100 g SpeedMixer™ Kit – contains 50 g part A (base), 50 g part B (cross-linker) in FlackTek SpeedMixer™ cups 1 kg kit – contains 500 g part A (base), 500 g part B (cross-linker)<br>Gelest®RG 07: 2-Part RTV Silicone Elastomer<br>hPDMS is a clear molding and encapsulation PDMS with a higher modulus than conventional silicones. This 'hard' PDMS addresses the issues of compliant PDMS in soft lithography applications.<br>Cured PDMS Properties<br>Tensile Strength: 0.50-0.75 MPaElongation: 30-40%Durometer, Shore A: 60-70<br></p>