METHYLTRIMETHOXYSILANE, 99%
CAS: 1185-55-3
Ref. 3H-SIM6560.1
2kg | Descatalogado | ||
100g | Descatalogado | ||
17kg | Descatalogado | ||
500g | Descatalogado | ||
190kg | Descatalogado |
Información del producto
- (Trimethoxysilyl)methane
- A 163
- A 1630
- Ay 43-043
- Cg 68
- Cg 8030
- Cg-N 113
- D 30 (silane)
- Db 8030
- Dmt 20
- Ver más sinónimos
- Dsl 9900
- Dynasylan MTMS
- Glasca B
- Jh-N 311
- Kbm 11
- Kbm 13
- Kc 89R
- Kh 131
- Kh 163
- Kh 370
- LS 530 (silane)
- Lmd 921
- Ls 530
- M 9100
- MTMS (silane)
- Methyl-Trimethoxy-Silan
- Methylsilicon trimethoxide (MeSi(OMe)3)
- Methylsilicon trimethoxide (MeSi(OMe)<sub>3</sub>)
- Methyltrimethoxysilane
- Methyltrimethyloxysilane
- Metiltrimetoxisilano
- Mts 31
- N 113
- NUC Silicone A 163
- Nd 28
- Np 31
- Nsc 93883
- Ofs 6070
- Si 1630
- Si 41
- Silane M 1 Trimethoxy
- Silquest A 163
- Silquest A 1630
- Silquest A 1630A
- Sim 6560.0
- Sip 6560.0
- Ss 1670
- Sz 6070
- Trimethoxy(methyl)silan
- Trimethoxy(methyl)silane
- Trimethoxymethylsilane
- Tsl 8113
- Up 302
- Wd 921
- We 22
- Xiameter OFS 6070
- Xinlantian D 30
- Z 6070
- Z 6366
- Zh 1101
Alkyl Silane - Conventional Surface Bonding
Aliphatic, fluorinated aliphatic or substituted aromatic hydrocarbon substituents are the hydrophobic entities which enable silanes to induce surface hydrophobicity. The organic substitution of the silane must be non-polar. The hydrophobic effect of the organic substitution can be related to the free energy of transfer of hydrocarbon molecules from an aqueous phase to a homogeneous hydrocarbon phase. A successful hydrophobic coating must eliminate or mitigate hydrogen bonding and shield polar surfaces from interaction with water by creating a non-polar interphase. Although silane and silicone derived coatings are in general the most hydrophobic, they maintain a high degree of permeability to water vapor. This allows coatings to breathe and reduce deterioration at the coating interface associated with entrapped water. Since ions are not transported through non-polar silane and silicone coatings, they offer protection to composite structures ranging from pigmented coatings to rebar reinforced concrete. A selection guide for hydrophobic silanes can be found on pages 22-31 of the Hydrophobicity, Hydrophilicity and Silane Surface Modification brochure.
Methyltrimethoxysilane; Trimethoxymethylsilane; Trimethoxysilylmethane
Viscosity: 0.50 cStΔHcomb: 4,780 kJ/molDipole moment: 1.60 debyeIntermediate for coating resinsAlkoxy crosslinker for condensation cure siliconesTrialkoxy silaneStandard grade available, SIM6560.0