
Amines
Les amines sont un ensemble de molécules contenant un groupe fonctionnel amino (dérivé de l'ammoniac). Cette catégorie inclut les amines à tous les niveaux de substitution : primaires, secondaires, tertiaires et sels d'ammonium. Les amines sont fondamentales dans la synthèse organique et sont largement utilisées dans les produits pharmaceutiques, les agrochimiques et les sciences des matériaux. Chez CymitQuimica, nous proposons une sélection complète d'amines pour répondre à vos besoins de recherche et industriels. Notre gamme assure l'accès à diverses amines pour divers processus chimiques et recherches innovantes.
Sous-catégories appartenant à la catégorie "Amines"
- Nitrosamines(2.606 produits)
- Amines primaires(30.947 produits)
- Cations d'ammonium quaternaire(1.100 produits)
- Amines secondaires(20.886 produits)
- Amines tertiaires(17.193 produits)
8780 produits trouvés pour "Amines"
Trier par
Degré de pureté (%)
0
100
|
0
|
50
|
90
|
95
|
100
Pyrithiamine
CAS :<p>Pyrithiamine is an antimicrobial agent that inhibits the growth of bacteria by disrupting the disulfide bond between two cysteine residues. It has been shown to inhibit the formation of bacterial spores, which are resistant to many antibiotics. Pyrithiamine also has antioxidant properties and can reduce oxidative stress in neurons, leading to neuronal death. This drug also has a strong effect on energy metabolism and may be used as a treatment for mitochondrial diseases.</p>Formule :C14H20Br2N4ODegré de pureté :Min. 95%Masse moléculaire :420.14 g/molN-1-Z-1,4-diaminobutane·HCl
CAS :<p>N-1-Z-1,4-diaminobutane·HCl is a monomeric compound that inhibits protein–protein interactions. It is a broad-spectrum inhibitor of protein–protein interactions and has been shown to have the potential for use in cancer treatments. The linkers on the N-1 and Z positions are important for the interaction with the target protein. The heterocycle at position 1 can vary depending on which protein is targeted. This compound has been effective against a number of proteins that interact with each other, including cyclin A/CDK2, cyclin B/CDK2, and actin/myosin II. This analog has been shown to be achievable by linking two molecules together through an amide bond.</p>Formule :C12H18N2O2·HClDegré de pureté :Min. 95%Masse moléculaire :258.74 g/mol(Deamino-Cys1,b-cyclohexyl-Ala4,Arg8)-Vasopressin trifluoroacetate salt
CAS :<p>Desmopressin is a synthetic analogue of vasopressin, which is used to treat disorders associated with insufficient secretion of vasopressin. It has been shown that desmopressin binds to the vasopressin V2 receptor subtype and stimulates the release of arginine-vasopressin in corticotropin-releasing hormone (CRH)-treated rat pituitary cells. This stimulation was mediated by a residue on the Cys1,b-cyclohexyl residue. The binding of desmopressin to this site was demonstrated in vitro using binding experiments on rat brain synaptosomes. Desmopressin has also been shown to stimulate ovulation in rats and humans, and it has been shown to be effective for treating nocturnal enuresis in children.</p>Formule :C50H71N13O11S2Degré de pureté :Min. 95%Masse moléculaire :1,094.31 g/mol4-Aminopicolinic acid
CAS :<p>4-Aminopicolinic acid is a synthetic amine that has been shown to activate plant science. 4-Aminopicolinic acid is a cyclic peptide with two subunits, one of which is 4-amino-3-pyridinecarboxylic acid. This compound has been synthesized from picolinic acid, an agriculturally important compound that is found in plant and animal tissues. The synthesis of 4-aminopicolinic acid involves the reaction of picolinic acid with nitrous oxide, followed by hydrolysis and oxidation to form the desired product. Hplc analyses have confirmed the presence of picolinic acid in extracts from various plants containing this compound.</p>Formule :C6H6N2O2Degré de pureté :Min. 95%Couleur et forme :White To Beige Or Pink To Light Brown SolidMasse moléculaire :138.12 g/mol4-Aminostyrene
CAS :4-Aminostyrene is a chemical compound that belongs to the class of ethylene diamines. It is a photoelectron acceptor and can be used as a cross-linking agent. 4-Aminostyrene reacts with nitro groups to form polycarboxylic acid amines, which are used in the preparation of model proteins. The use of 4-aminostyrene is limited by its high reactivity with oxygen and light, which leads to degradation.Formule :C8H9NDegré de pureté :Min. 95%Couleur et forme :Liquid.Masse moléculaire :119.16 g/molDABCYL-(Asn670,Leu671)-Amyloid b/A4 Protein Precursor770 (669-674)-EDANS ammonium salt
CAS :<p>Please enquire for more information about DABCYL-(Asn670,Leu671)-Amyloid b/A4 Protein Precursor770 (669-674)-EDANS ammonium salt including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C54H70N12O15SDegré de pureté :Min. 95%Masse moléculaire :1,159.27 g/mols-2-(4-Aminobenyl)-diethylenetriamine penta-tert-butyl acetate
CAS :<p>Please enquire for more information about s-2-(4-Aminobenyl)-diethylenetriamine penta-tert-butyl acetate including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Degré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :779.02 g/molBiotinyl-Amyloid b-Protein (1-42) ammonium salt
CAS :<p>Please enquire for more information about Biotinyl-Amyloid b-Protein (1-42) ammonium salt including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C213H325N57O62S2Degré de pureté :Min. 95%Masse moléculaire :4,740.34 g/molEthyl 2-((tert-butoxycarbonylamino)methyl)thiazole-4-carboxylate
CAS :Please enquire for more information about Ethyl 2-((tert-butoxycarbonylamino)methyl)thiazole-4-carboxylate including the price, delivery time and more detailed product information at the technical inquiry form on this pageFormule :C12H18N2O4SDegré de pureté :Min. 95%Masse moléculaire :286.35 g/molAmmonium molybdate tetrahydrate - ACS
CAS :<p>Ammonium molybdate tetrahydrate (AMT) is a molybdenum compound with the chemical formula (NH4)6Mo7O24·4H2O. It is a yellow crystalline solid that is soluble in water and n-hexane. AMT has been clinically used for the treatment of Wilson's disease, an inherited disorder that causes copper to accumulate in the body. AMT binds to copper ions and prevents them from being absorbed into the bloodstream. The rate of ATP production increases when AMT is added to cells, which may be due to its effect on electron transport or because it inhibits ATPase activity.</p>Formule :(NH4)6Mo7O24•(H2O)4Degré de pureté :Min. 95%Couleur et forme :White Clear LiquidMasse moléculaire :1,236 g/molTCO-amine hydrochloride
CAS :Please enquire for more information about TCO-amine hydrochloride including the price, delivery time and more detailed product information at the technical inquiry form on this pageFormule :C12H22N2O2•HClDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :262.78 g/mol1,2-Dilauroyl-sn-glycero-3-phosphoethanolamine
CAS :<p>1,2-Dilauroyl-sn-glycero-3-phosphoethanolamine (DLPE) is a lipid molecule that can induce phase transition in aqueous solutions. DLPE is an active ingredient in nonsteroidal anti-inflammatory drugs and has been shown to inhibit the activity of enzymes such as cyclooxygenase and lipoxygenase. DLPE also inhibits the growth of infectious organisms such as Escherichia coli and HIV by inhibiting receptor activity. DLPE binds to receptors on the surface of cells, which prevents these cells from releasing inflammatory cytokines.</p>Formule :C29H58NO8PDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :579.75 g/mol2-Amino-5-(trifluoromethoxy)benzoic acid
CAS :<p>Please enquire for more information about 2-Amino-5-(trifluoromethoxy)benzoic acid including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C8H6F3NO3Degré de pureté :Min. 95%Masse moléculaire :221.13 g/mol3-Amino-4-hydroxybenzoic acid hydrochloride
CAS :<p>3-Amino-4-hydroxybenzoic acid hydrochloride (3ABA) is a crystalline compound with a molecular formula of C6H5NO2. It is an acidic compound that is soluble in water and alcohol, but not in ether. 3ABA has been used as the starting material for the synthesis of many other organic compounds. It can be obtained by reacting phenol with chlorobenzoyl chloride to form the chlorobenzoate salt, which on hydrolysis yields 3ABA. This compound has also been used as a reagent for synthesizing carbon nanotubes. The crystal structure of 3ABA was determined using X-ray diffraction data from crystallographic studies, and it was found to have three independent molecules per unit cell. Diffraction indicated that each molecule is composed of two benzene rings joined by a single bond between carbon atoms 1 and 2 and another bond between carbon atoms 2 and 3.</p>Formule :C7H8ClNO3Degré de pureté :Min. 95%Masse moléculaire :189.6 g/mol1-Aminononadecane
CAS :<p>1-Aminononadecane is a monolayer, which is a type of thin film that consists of two layers of molecules. It consists of fatty acids, which are long-chain carboxylic acid molecules, and particle, which is the smallest part of a substance. 1-Aminononadecane has been shown to be biocompatible with cells when mixed with amines, such as amino acids and proteins. The film also has phase transition temperature between -20°C and +100°C, viscosity values that range from 10-6 to 10-1 Pa·s for polymer films (10 Pa·s for pure 1-aminononadecane), reaction vessel where it is made in an organic solvent or water at neutral pH, and chemical structures that include both aromatic hydrocarbons and unsaturated alkyl chains.</p>Formule :C19H41NDegré de pureté :Min. 95%Couleur et forme :White PowderMasse moléculaire :283.54 g/mol2-[[2-(Dimethylaminomethyl)-1,3-thiazol-4-yl]methylsulfanyl]ethanamine
CAS :<p>2-[[2-(Dimethylaminomethyl)-1,3-Thiazol-4-Yl]Methylsulfanyl]Ethanamine is a compound that exhibits unique characteristics and properties. It has a high viscosity and is commonly used as a plasticizer in polyvinyl materials. The compound contains hydroxyl groups that contribute to its versatility in various applications.<br><br>One notable feature of 2-[[2-(Dimethylaminomethyl)-1,3-Thiazol-4-Yl]Methylsulfanyl]Ethanamine is its ability to interact with TGF-beta (transforming growth factor beta), a protein involved in cell growth and differentiation. This interaction can modulate the signaling pathways regulated by TGF-beta, making it potentially useful in biomedical research.<br><br>The compound also possesses photoreactive properties, particularly when combined with benzoate derivatives. This makes it suitable for use in photoreactions and other light-induced processes.<br><br>Additionally, 2-[[2</p>Formule :C9H17N3S2Degré de pureté :Min. 95%Masse moléculaire :231.38 g/molFmoc-S-trityl-L-penicillamine
CAS :<p>Fmoc-S-trityl-L-penicillamine is a coordination compound that contains a thiolate and amide group. It has been used as a model system for studying the interaction between proteins and metal ions, with the cyclic structure mimicking the active site of enzymes. The coordination of Fmoc-S-trityl-L-penicillamine to proteins is affected by trypsin, an enzyme that cleaves peptides at carboxyl side chains. Trypsin can also lead to dehydration of Fmoc-S-trityl-L-penicillamine, forming an eliminations product. This compound also reacts with lysine residues in proteins, resulting in an alkene byproduct that can be removed by hydrogenation.</p>Formule :C39H35NO4SDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :613.77 g/molS-(+)-N,N-Dimethyl-3-(1-naphthalenyloxy)-3-(2-thienyl)-1-propanamine oxalate
CAS :<p>Please enquire for more information about S-(+)-N,N-Dimethyl-3-(1-naphthalenyloxy)-3-(2-thienyl)-1-propanamine oxalate including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Degré de pureté :Min. 95%Ethylenediaminetetraacetic acid tripotassium salt dihydrate
CAS :Ethylenediaminetetraacetic acid tripotassium salt dihydrate is an anticoagulant that can be used as a coagulant for blood samples. It is often used in polymerase chain reactions to synthesize DNA, or to isolate and purify genomic DNA. This compound has ferroelectric properties and can be used as a target cell in optical imaging applications. Ethylenediaminetetraacetic acid tripotassium salt dihydrate is also used in the production of polyurethanes and as a polymerization inhibitor in cinnamon oil.Formule :C10H13K3N2O8·2H2ODegré de pureté :Min. 95%Masse moléculaire :442.54 g/mol(2S,3S)-(-)-3-Amino-2-phenylpiperidine
CAS :The process of asymmetric epoxidation is used to convert alkenes into epoxides in a single step. This reaction is catalyzed by the use of a chiral catalyst with an enantiomeric excess (ee) greater than 50%. The reactants are added to the catalyst and hydrogen peroxide, which oxidizes the alkenes. The resulting epoxides can be isolated from the reaction mixture by distillation or extraction. Factors that affect this reaction include the type of reactant, solvent, temperature, and pressure.Formule :C11H16N2Degré de pureté :Min. 95%Masse moléculaire :176.26 g/mol(H-Asp-Glu-Val-Asp)2-Rhodamine 110 trifluoroacetate salt
CAS :<p>Please enquire for more information about (H-Asp-Glu-Val-Asp)2-Rhodamine 110 trifluoroacetate salt including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C56H66N10O23Degré de pureté :Min. 95%Masse moléculaire :1,247.18 g/mol2-Amino-5-methoxypyridine
CAS :<p>2-Amino-5-methoxypyridine (2AM5MP) is a synthetic compound that is used to study the nicotinic acetylcholine receptor. It has been shown that 2AM5MP can be used as an agonist for the nicotinic acetylcholine receptor, which may be due to its ability to act as a substrate for amine oxidase. This compound has been shown to have anti-cancer properties and fluoresce when exposed to positron emission tomography (PET) scans. The anti-cancer effects of 2AM5MP are thought to be due to its ability to inhibit cancer cell proliferation and induce cancer cell apoptosis.</p>Formule :C6H8N2ODegré de pureté :Min. 95%Masse moléculaire :124.14 g/mol5-Amino-2-methoxyisonicotinic acid
CAS :<p>5-Amino-2-methoxyisonicotinic acid is a carboxylic acid that is used in the synthesis of aminopyridines. The compound can be synthesized from formamidine acetate and diethyl dicarbonate. This process involves lithiation, followed by addition of an amine and finally conversion to the desired product with formamidine acetate. 5-Amino-2-methoxyisonicotinic acid can also be synthesized from formamide and diethyl ether. 5-Amino-2-methoxyisonicotinic acid is an analog of 2,4,6-trimethylaniline and has been shown to have similar properties to this compound, including strong basicity.</p>Formule :C7H8N2O3Degré de pureté :Min. 95%Masse moléculaire :168.15 g/molN-(3-Dimethylaminopropyl)acrylamide, stabilized with MEHQ
CAS :<p>N-(3-Dimethylaminopropyl)acrylamide is a polymerization initiator that is used in the synthesis of polymers. It is also a model protein, which can be used to study bacterial growth rates and tissue metabolism. N-(3-Dimethylaminopropyl)acrylamide has been shown to have biological properties similar to human serum, as well as to serve as a model for primary cells. The FT-IR spectroscopy of N-(3-Dimethylaminopropyl)acrylamide reveals the presence of chloride ions in its molecular structure. The reaction mechanism for this compound has been determined by deionized water and ionic reactions with chloride ions.</p>Formule :C8H16N2ODegré de pureté :Min. 95%Masse moléculaire :156.23 g/mol5-Amino-2-bromobenzonitrile
CAS :<p>Please enquire for more information about 5-Amino-2-bromobenzonitrile including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C7H5BrN2Degré de pureté :95%NmrMasse moléculaire :197.03 g/molFmoc-epsilon-aminocaproic acid-Wang resin (200-400 mesh)
<p>Please enquire for more information about Fmoc-epsilon-aminocaproic acid-Wang resin (200-400 mesh) including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Degré de pureté :Min. 95%N-Des(2-diethylamino) metoclopramide acetic acid
CAS :<p>N-Des(2-diethylamino) metoclopramide acetic acid is a benzyl ester of metoclopramide, a prodrug that is metabolized to the active form in the body. It has been shown to be effective against healthy human subjects and hplc analyses of biological samples have shown it to be a metabolite of metoclopramide. N-Des(2-diethylamino) metoclopramide acetic acid is used as a catalyst for catalytic hydrogenation reactions, such as the conversion of methyl esters into ethyl or butyl esters. It can also be used for catalytic hydrogenation reactions with diazomethane, such as those required for the synthesis of quinolones.</p>Formule :C10H11ClN2O4Degré de pureté :Min. 95%Masse moléculaire :258.66 g/molPent-4-enylamine
CAS :Pent-4-enylamine is a nitrogen nucleophile that can react with alkenes to form compounds. Pent-4-enylamine reacts quickly with alcohols and ethers in the presence of an acid catalyst to produce an alkene. Pent-4-enylamine has been used in food chemistry as a reactive intermediate for the formation of functional groups, such as amines, hydroxyl groups, and nitriles. It is also a model system for studying aminoalkenes and their reactions with other functional groups. Pent-4-enylamine has been shown to be a reactive heterocycle that forms 5 membered heteroaryl rings using structural analysis and model system studies.Formule :C5H11NDegré de pureté :Min. 95%Masse moléculaire :85.15 g/molN-Methyl-1,2-phenylenediamine dihydrochloride
CAS :N-Methyl-1,2-phenylenediamine dihydrochloride (NMP) is a synthetic compound that is used as the precursor to various pharmaceuticals, such as the antihypertensive drug clonidine. NMP can be synthesized from benzene and ammonia or phenylmagnesium bromide. It is carcinogenic in animals and humans, and has been shown to cause DNA damage and cell apoptosis. The chemical has a high potential for nitrosation reactions when exposed to nitrites. This reaction produces nitric oxide, which is cytotoxic and can lead to liver cancer in rats. The synthesis of NMP generates impurities such as methanol solvent, sodium sulfide, and hydrogen chloride gas. These impurities are often found in recycled NMP due to incomplete removal during processing.Formule :C7H12Cl2N2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :195.09 g/mol2-Cyclohexylethanamine hydrochloride
CAS :<p>Please enquire for more information about 2-Cyclohexylethanamine hydrochloride including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C8H18ClNDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :163.69 g/molMethyl 3-amino-2-phenylpropanoate HCl
CAS :<p>Methyl 3-amino-2-phenylpropanoate HCl is a chemical intermediate that is synthesized in the biosynthesis of scopolamine and tenellin. It has been found to be an isotopically labeled analog of tropane alkaloids, which are a class of natural products that includes atropine, hyoscyamine, and scopolamine. Methyl 3-amino-2-phenylpropanoate HCl is one of many compounds that can provide structural insights into the biosynthesis and metabolism of these compounds.</p>Formule :C10H13NO2·HClDegré de pureté :Area-% Min. 95 Area-%Couleur et forme :PowderMasse moléculaire :215.68 g/mol(1R,3S)-3-Aminocyclopentanol hydrochloride
CAS :<p>Intermediate in the synthesis of bictegravir</p>Formule :C5H12ClNODegré de pureté :Min. 95%Masse moléculaire :137.61 g/mol(alphaR)-alpha-[[[2-(4-Nitrophenyl)ethyl]amino]methyl]benzenemethanol hydrochloride
CAS :<p>Intermediate in the synthesis of mirabegron</p>Formule :C16H18N2O3·HClDegré de pureté :Min. 95%Masse moléculaire :322.79 g/moltrans-1,2-Diaminocyclohexane-N,N,N',N'-tetraacetic acid monohydrate
CAS :<p>Trans-1,2-Diaminocyclohexane-N,N,N',N'-tetraacetic acid monohydrate (CDTA) is a chelating agent that has been shown to be effective in the treatment of some cancers. CDTA has been shown to inhibit the growth of tumor cells by binding to lysine residues on histones and DNA and inhibiting their acetylation. CDTA also prevents the genotoxicity induced by irradiation. CDTA can be used as an adjuvant in cancer therapy due to its ability to inhibit histone deacetylase activity. Trans-1,2-Diaminocyclohexane-N,N,N',N'-tetraacetic acid monohydrate is synthesized from two amino acids: lysine and glutamic acid. This molecule is a polymeric compound composed of cyclic molecules linked together through amide bonds. These polymers are linear chains of</p>Formule :C14H22N2O8·H2OCouleur et forme :White PowderMasse moléculaire :364.35 g/mol(R)-3-Amino-4-(2,4,5-trifluorophenyl)butyric acid
CAS :<p>(R)-3-Amino-4-(2,4,5-trifluorophenyl)butyric acid is an antibacterial agent that inhibits the enzyme acetylcholine esterase. This inhibition prevents the breakdown of acetylcholine, leading to increased levels of this neurotransmitter in the brain and an enhancement of cholinergic transmission. (R)-3-Amino-4-(2,4,5-trifluorophenyl)butyric acid has been shown to be effective against bacterial strains resistant to β-lactam antibiotics. The synthesis of taxol as well as other β-amino acids has been demonstrated using a variety of enzymatic methods. A reaction scheme for the synthesis of nicotinic acetylcholine has also been proposed. (R)-3-Amino-4-(2,4,5-trifluorophenyl)butyric acid is a dipept</p>Formule :C10H10F3NO2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :233.19 g/molBoc-4-aminopiperidine
CAS :<p>Boc-4-aminopiperidine is a molecule that is used as a substrate in chemical reactions. It reacts with sodium hydroxide solution to form an imine, which is hydrogenated by reducing agents such as NaBH4. This reaction yields the products 4-aminopiperidine and acetaldehyde. Boc-4-aminopiperidine is also utilized as a cholinesterase inhibitor, which inhibits the breakdown of acetylcholine at nerve endings. The inhibitory activity of Boc-4-aminopiperidine can be determined using diagnostic techniques and it can be used to inhibit viruses such as HIV and influenza A virus.</p>Formule :C10H20N2O2Degré de pureté :Min. 95%Masse moléculaire :200.28 g/mol4-Amino-6-mercaptopyrazolo[3,4-d]pyrimidine
CAS :<p>Please enquire for more information about 4-Amino-6-mercaptopyrazolo[3,4-d]pyrimidine including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C5H5N5SDegré de pureté :Min. 95%Masse moléculaire :167.19 g/molN-(3-Aminopropyl)-2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctanamide
CAS :Produit contrôlé<p>Please enquire for more information about N-(3-Aminopropyl)-2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctanamide including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C11H9F15N2ODegré de pureté :Min. 95%Masse moléculaire :470.18 g/molPropylamine
CAS :<p>Propylamine is a colorless, volatile liquid with a boiling point of -26.3°C. It has been shown to have the ability to react with sephadex g-100, which is a chromatographic material that separates proteins according to their size and charge. Propylamine has also been shown to undergo transfer reactions in the presence of hydroxyl groups and disulfide bonds. The chemical properties of propylamine have been studied using analytical methods such as nuclear DNA analysis, as well as biological studies involving the use of trifluoroacetic acid and nitrogen atoms for hydrogen bonding interactions.</p>Formule :C3H9NDegré de pureté :Min. 95%Masse moléculaire :59.11 g/molN1-(Pivaloyloxy)methyl-N2-(dimethylamino)methylene 9-deazaguanine
CAS :<p>Please enquire for more information about N1-(Pivaloyloxy)methyl-N2-(dimethylamino)methylene 9-deazaguanine including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C15H21N5O3Degré de pureté :Min. 95%Masse moléculaire :319.36 g/molAmmonium Undecafluorohexanoate
CAS :<p>Undecafluorohexanoic acid is a perfluoroalkyl carboxylic acid that has been shown to disrupt steroidogenesis in vitro. It may be able to inhibit the transport of cholesterol, fats, and other lipids in cells, which causes disruption in steroidogenesis. This compound also has anti-cancer properties due to its ability to induce apoptosis and arrest cancer cell proliferation. Undecafluorohexanoic acid may also have developmental effects on animals because it can bind to estrogen receptors and disrupt the normal process of estrogen-mediated signaling pathways.</p>Formule :C6H4F11NO2Degré de pureté :Min. 95%Masse moléculaire :331.08 g/molEDTA ferric ammonium
CAS :<p>EDTA ferric ammonium is a metal complex that is used in the manufacture of textile dyes. EDTA ferric ammonium is an oxidizing agent that can be used as a reducing agent by adding an oxidizing agent such as potassium permanganate. The solution form of this compound has a particle size distribution with a median particle size of about 0.5 micrometers and a polydispersity index of about 2. In addition, it has been shown to have surfactant properties, which may be due to its ability to interact with the surface tension of water molecules. EDTA ferric ammonium has also been shown to react with silver ions to form silver ethylene diamine tetraacetic acid (AgEDTA), which can then be used for patterning purposes in textiles.</p>Formule :C10H12FeN2O8•NH4Degré de pureté :80%MinCouleur et forme :PowderMasse moléculaire :362.09 g/mol4-Methylaminophenol sulfate
CAS :<p>4-Methylaminophenol sulfate is an enzyme substrate that is used in the analytical method for determining the concentration of potassium dichromate. It is prepared by reacting 4-methylaminophenol with sulfuric acid, and its optimum concentration is 0.2 mM. The linear calibration curve was obtained at a pH range of 2 to 5.4 and a temperature range of 25 to 37°C. The analytical method can be applied to human serum samples and has been shown to be applicable for studies on autoimmune diseases and anthelmintics.</p>Formule :C7H9NO•(H2O4S)0Degré de pureté :Min. 95%Couleur et forme :White PowderMasse moléculaire :344.39 g/molTES
CAS :<p>TES, also known as N-Tris(hydroxymethyl)methyl-2-aminoethanesulfonic acid, is a buffering agent that is used in protein assays and forms complexes with DNA and copper ions. The optimal pH range of this zwitterionic buffer is 6.8-8.2 and its pKa is 7.4.</p>Formule :C6H15NO6SDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :229.25 g/molIsopropyl 2-amino-4-hydroxy-5,8-dihydropyrido[3,4-d]pyrimidine-7(6H)-carboxylate
CAS :<p>Please enquire for more information about Isopropyl 2-amino-4-hydroxy-5,8-dihydropyrido[3,4-d]pyrimidine-7(6H)-carboxylate including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C11H16N4O3Degré de pureté :Min. 95%Masse moléculaire :252.27 g/molTetrapropylammonium perruthenate
CAS :<p>Tetrapropylammonium perruthenate is a polymeric matrix that contains a chelate ligand and can be used as an oxygen sensor. The polymer is synthesized in the presence of trifluoroacetic acid (TFA) using tetrapropylammonium chloride (TPACl) and perruthenate. Tetrapropylammonium perruthenate forms a polymeric matrix with TPACl, which contains a chelate ligand. The polymer is sensitive to changes in the environment such as pH, temperature, and oxidation-reduction potential. The polymeric matrix can be used for sensing the concentration of oxygen in liquid or gas phase by measuring fluorescence intensity at various wavelengths. These measurements are correlated with the concentration of oxygen in the environment.</p>Formule :C12H28NO4RuDegré de pureté :Min. 95%Masse moléculaire :351.43 g/molEVP4593
CAS :<p>6-Amino-4-(4-phenoxyphenylethylamino)quinazoline is a potential anticancer drug that has been shown to inhibit the polymerase chain reaction in human osteosarcoma cells. It also inhibits the signaling pathway of nuclear factor-κB (NF-κB), which is involved in cell death and tumorigenesis. 6-Amino-4-(4-phenoxyphenylethylamino)quinazoline has shown significant cytotoxicity against murine hepatoma cells and bowel disease cells, but not against normal tissue. This drug is also an inhibitor of the drug transporter Pgp. 6-Amino-4-(4-phenoxyphenylethylamino)quinazoline has been shown to be effective in experimental models for cancer, AIDS, and other infectious diseases.</p>Formule :C22H20N4ODegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :356.42 g/molDextroamphetamine saccharate
CAS :Produit contrôlé<p>Dextroamphetamine saccharate is a pharmaceutical drug that belongs to the group of amphetamine derivatives. It is used in the treatment of conditions such as narcolepsy and attention-deficit disorder (ADD). The epidermal growth factor receptor (EGFR) is an important target for the effects of this drug, which has been shown to stimulate growth and proliferation in vitro. Dextroamphetamine saccharate has a complex pharmacokinetic profile and is metabolized by hydrolysis into dextroamphetamine. This drug also binds to voltage-dependent calcium channels, which regulate neurotransmitter release at nerve terminals. The pain relief associated with dextroamphetamine saccharate may be due to its ability to block pro-inflammatory cytokines or inhibit trigeminal nerve activity.</p>Formule :C6H10O8(C9H13N)2Degré de pureté :Min. 95%Masse moléculaire :480.6 g/mol4-[2-[[(1S)-1-(2-Aminophenyl)-3-methylbutyl]amino]-2-oxoethyl]-2-ethoxybenzoic acid
CAS :<p>Bosentan is a potent inhibitor of the uptake of organic anions. It is used in the treatment of pulmonary arterial hypertension and has been shown to be effective against pravastatin-resistant HIV protease inhibitors, such as saquinavir, quinidine, and rosuvastatin. Bosentan inhibits uptake by binding to the transporter protein at a site that does not overlap with the binding site for organic anion substrates. This leads to a change in kinetic parameters for substrates, such as pravastatin and saquinavir. The binding site on bosentan may also be elucidated through monolayer experiments with efflux transporters.</p>Formule :C22H28N2O4Degré de pureté :Min. 95%Masse moléculaire :384.47 g/mol4-Acetylamino-5-bromo-2-methoxy-benzoic acid methylester
CAS :<p>Please enquire for more information about 4-Acetylamino-5-bromo-2-methoxy-benzoic acid methylester including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C11H12BrNO4Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :302.12 g/mol4-Aminopyrene
CAS :<p>4-Aminopyrene is an aromatic amine that contains a nitro group. It has been used in biological studies to study the metabolism of amines, and chromatographic and mass spectrometric detection methods have been developed for its determination. 4-Aminopyrene also has the ability to form isomers through substitution on the N atom. The activation energy for this process is 14.3 kcal/mol. 4-Aminopyrene has been shown to be cytotoxic and mutagenic in vitro, and it can inhibit protein synthesis in bacteria by inhibiting RNA synthesis at the ribosome level. It has also been shown to induce changes in cell morphology and stimulate morphological differentiation of human promyelocytic leukemia cells (HL-60).</p>Degré de pureté :Min. 95%2-[(Ethylamino)methyl]-4-aminophenol dihydrochloride
CAS :<p>Please enquire for more information about 2-[(Ethylamino)methyl]-4-aminophenol dihydrochloride including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C9H14N2O•(HCl)2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :239.14 g/mol[[4-[[2-(4-Cyclohexylphenoxy)ethyl]ethylamino]-2-methylphenyl]methylene]malononitrile
CAS :<p>[[4-[[2-(4-Cyclohexylphenoxy)ethyl]ethylamino]-2-methylphenyl]methylene]malononitrile (CAS #: 68436-91-7) is a reactive chemical species that has been used as a crosslinking agent and an uv absorption dye. CEM is a styryl dye that absorbs radiation in the uv range, with a maximum absorption at about 275 nm. It is a substrate film for light emission and can be used to measure viscosity. CEM is also chemically related to aromatic hydrocarbons and fatty acids, and can be synthesized from hydroxyl groups.</p>Formule :C27H31N3ODegré de pureté :Min. 95%Masse moléculaire :413.55 g/molN,N-Dimethyl-N′-1H-pyrazol-4-ylmethanimidamide
CAS :<p>2-(4-Morpholinophenyl)ethylamine is a fine chemical that is a versatile building block, useful intermediate, and research chemical. It is used in the synthesis of complex compounds, useful building blocks, and high quality reagents. The CAS registry number for 2-(4-morpholinophenyl)ethylamine is 930779-56-9.</p>Formule :C6H10N4Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :138.17 g/mol[(5-Isopropyl-1,2,4-oxadiazol-3-yl)methyl]amine
CAS :Please enquire for more information about [(5-Isopropyl-1,2,4-oxadiazol-3-yl)methyl]amine including the price, delivery time and more detailed product information at the technical inquiry form on this pageFormule :C6H11N3ODegré de pureté :Min. 95%Masse moléculaire :141.17 g/molN-(5-Aminopentyl) methotrexate amide-LC-biotin
<p>N-(5-Aminopentyl) methotrexate amide-LC-biotin is a specialized bioconjugate, derived through the conjugation of methotrexate, an established antifolate drug, with an LC-biotin moiety. This product is synthesized by covalently linking methotrexate, which is known for its role in cancer therapy through the inhibition of dihydrofolate reductase (DHFR), to a biotin moiety via a long-chain spacer. The resultant bioconjugate retains the therapeutic effects of methotrexate, particularly in its ability to interrupt nucleotide synthesis, thereby affecting cell division in rapidly proliferating cancer cells.The inclusion of biotin in the structure allows for facile attachment to avidin or streptavidin-labeled systems, facilitating targeted delivery and enhanced detection in molecular and cellular studies. The primary application of N-(5-Aminopentyl) methotrexate amide-LC-biotin lies in the realm of targeted drug delivery and advanced research into methotrexate metabolism. By leveraging the high affinity of biotin-streptavidin interactions, researchers can effectively study the biodistribution and cellular uptake of methotrexate, advancing cancer therapeutic strategies and providing insights into antifolate drug mechanisms at the molecular level.</p>Formule :C41H59N13O7SDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :878.06 g/mol8-Fluoro-Quinazoline-2,4-Diamine
CAS :8-Fluoro-Quinazoline-2,4-Diamine is an organic compound with the formula CHClN. It is a yellow solid that is soluble in organic solvents such as chloroform and toluene. The compound is used to produce dyes and pharmaceuticals. 8-Fluoro-Quinazoline-2,4-Diamine can be obtained by nitrating 2,4-diaminoquinazoline with nitric acid and hydrochloric acid in the presence of carbonate or stannous chloride. This reaction produces two isomers: 8-fluoroquinazoline (8FQ) and 6-fluoroquinazoline (6FQ). The 8FQ isomer has been shown to have a nuclear magnetic resonance spectrum at 300 MHz that contains four signals at 1.3 ppm, 3.5 ppm, 5.6 ppm, and 7.0 ppm, which are assigned toFormule :C8H7FN4Degré de pureté :Min. 95%Masse moléculaire :178.17 g/mol3-[2-Amino-3-(2-tert-butoxycarbonyl-ethoxy)-2-(2-tert-butoxycarbonyl-ethoxymethyl)-propoxy]-propionic acid tert-butyl ester
CAS :<p>Please enquire for more information about 3-[2-Amino-3-(2-tert-butoxycarbonyl-ethoxy)-2-(2-tert-butoxycarbonyl-ethoxymethyl)-propoxy]-propionic acid tert-butyl ester including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C25H47NO9Degré de pureté :Min. 95%Masse moléculaire :505.64 g/molEthyl2-(acetylamino)-3-[3,5-diiodo-4-(4-methoxyphenoxy)phenyl]propanoate
CAS :Please enquire for more information about Ethyl2-(acetylamino)-3-[3,5-diiodo-4-(4-methoxyphenoxy)phenyl]propanoate including the price, delivery time and more detailed product information at the technical inquiry form on this pageFormule :C20H21I2NO5Degré de pureté :Min. 95%Masse moléculaire :609.19 g/mol5-[4-(1,2,4,5-Tetrazin-3-yl)benzylamino]-5-oxopentanoic acid
CAS :Please enquire for more information about 5-[4-(1,2,4,5-Tetrazin-3-yl)benzylamino]-5-oxopentanoic acid including the price, delivery time and more detailed product information at the technical inquiry form on this pageFormule :C14H15N5O3Degré de pureté :Min. 95%Couleur et forme :White To Yellow To Dark Red SolidMasse moléculaire :301.3 g/molN-Phenylbenzene-1,3-diamine
CAS :<p>Please enquire for more information about N-Phenylbenzene-1,3-diamine including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C12H12N2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :184.24 g/mol3-(Aminomethyl)-N,N-dimethyl-1,2,4-oxadiazole-5-carboxamide
CAS :<p>Please enquire for more information about 3-(Aminomethyl)-N,N-dimethyl-1,2,4-oxadiazole-5-carboxamide including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C6H10N4O2Degré de pureté :Min. 95%Masse moléculaire :170.17 g/mol(R)(−)-DOI hydrochloride
CAS :Produit contrôlé(R)(−)-DOI hydrochloride is a synthetic compound classified as a selective serotonin receptor agonist. It is primarily sourced from chemical synthesis processes designed to explore potential interactions within serotonergic pathways. The compound’s mode of action involves the activation of 5-HT2A, 5-HT2B, and 5-HT2C serotonin receptors, which play crucial roles in modulating neurotransmission and signaling pathways within the central nervous system.In research and experimental contexts, (R)(−)-DOI hydrochloride is utilized to investigate the molecular mechanisms of serotonin receptors, contributing to a deeper understanding of their role in neurophysiology and potential implications in neuropsychiatric disorders. Studies often explore its effects on cognition, perception, and mood regulation. Despite its promising role in scientific exploration, (R)(−)-DOI hydrochloride is not intended for therapeutic use and remains predominantly a tool for advancing the field of neuropharmacology through controlled experimental settings.Formule :C11H17ClINO2Degré de pureté :Min. 95%Masse moléculaire :357.62 g/mol7-[(2S,3R)-3-Amino-2-methyl-azetidin-1-yl]-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-quinoline-3-carboxylic acid
CAS :<p>7-[(2S,3R)-3-Amino-2-methyl-azetidin-1-yl]-1-(2,4-difluorophenyl)-6-fluoro-4-oxo-quinoline-3-carboxylic acid (ABT) is a drug that binds to bacterial enzymes and inhibits their ability to synthesize proteins. ABT is a conjugate of fluoroquinolone and an amino acid. As the drug is degradable by hydrolysis, it has been shown to be less toxic in Sprague Dawley rats than other fluoroquinolones. This drug has been used in diagnostic tests as a ligand for affinity ligands, but has not been approved for human use. The drug also possesses functional groups that are important for binding to reconstituted enzymes.br>br>ABT's ester linkages are degradable by hydrolysis and can be</p>Formule :C20H16F3N3O3Degré de pureté :Min. 95%Masse moléculaire :403.35 g/mol1-Acetyl-6-(perfluoropropan-2-yl)-3-((pyridin-3-ylmethyl)amino)-3,4-dihydroquinazolin-2(1H)-one
CAS :<p>1-Acetyl-6-(perfluoropropan-2-yl)-3-((pyridin-3-ylmethyl)amino)-3,4-dihydroquinazolin-2(1H)-one (PAFQ) is a mitochondrial cytochrome P450 inhibitor that inhibits the function of the ryanodine receptor and interacts with the piperonyl butoxide synergistically. PAFQ has been shown to be effective against animal pests such as termites, ants, and cockroaches. It also inhibits population growth in these populations by interfering with their ability to synthesize proteins. The effective dose for PAFQ varies depending on whether it is applied topically or orally.</p>Formule :C19H15F7N4O2Degré de pureté :Min. 95%Masse moléculaire :464.34 g/moltert-Butyl 3-(aminomethyl)-1H-indole-1-carboxylate hydrochloride
CAS :<p>Please enquire for more information about tert-Butyl 3-(aminomethyl)-1H-indole-1-carboxylate hydrochloride including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C14H18N2O2Degré de pureté :Min. 95%Masse moléculaire :246.31 g/molAminogenistein
CAS :<p>Aminogenistein is a molecule that has been shown to inhibit the growth of cancer cells. It has been shown to have a reactive functional group, which can be used as a diagnostic and prognostic tool for kidney disease and cancers. Aminogenistein has also been shown to inhibit epidermal growth factor (EGF) in rat kidneys, which may be due to its ability to bind EGF with high affinity. In addition, it has been shown to inhibit cellular physiology by blocking the transport properties of proximal tubules in rat kidneys. Aminogenistein is thought to induce apoptosis through the death protein pathway in cancer cells, but not normal cells.</p>Formule :C15H11NO3Degré de pureté :Min. 95%Masse moléculaire :253.25 g/mol5-Amino-4-methyl-4H-1,2,4-triazole-3-thiol
CAS :Please enquire for more information about 5-Amino-4-methyl-4H-1,2,4-triazole-3-thiol including the price, delivery time and more detailed product information at the technical inquiry form on this pageFormule :C3H6N4SDegré de pureté :Min. 95%Masse moléculaire :130.17 g/mol2-[(2,3-Dimethylphenyl)amino]nicotinic acid
CAS :<p>2-[(2,3-Dimethylphenyl)amino]nicotinic acid is an arylpropionic acid that has been designed for the treatment of cancer. It is a neutral compound that can be crystallized or sterilized and then injected or implanted into tissues. The compound can be used as a diagnostic tool to target specific tissues in the body by using iontophoresis or organic solvents. 2-[(2,3-Dimethylphenyl)amino]nicotinic acid interacts with chlorine ions to form a chloride derivative, which is then transported through the tissue. This process can be reversed by adding an acid solution to the tissue, which will cause the chloride ions to break down into hydrogen and chloride ions.</p>Formule :C14H14N2O2Degré de pureté :Min. 95%Masse moléculaire :242.27 g/molBenzydamine N-oxide
CAS :Produit contrôléBenzydamine N-oxide is a polymorphic, michaelis-menten kinetics and pharmacological treatments drug. It has been shown to have anti-inflammatory effects in humans and animals. The main pharmacological targets of benzydamine are the human liver and alveolar type II cells. This drug has low bioavailability but is metabolized by the liver cells into benzydamine n-oxide which can be excreted through urine or bile. The formation rate of benzydamine n-oxide in the human body is about 2% per hour, which is dependent on the enzyme catalysis.Formule :C19H23N3O2Degré de pureté :Min. 90 Area-%Couleur et forme :PowderMasse moléculaire :325.4 g/mol(+)(1S,2S,4R)-Bicyclo[2.2.1]heptane-2-amine
CAS :<p>(+)(1S,2S,4R)-Bicyclo[2.2.1]heptane-2-amine is a heterocyclic compound that contains a nitrogen atom and an amine group. It has been shown to be a potent inhibitor of the enzyme activities of malonic acid decarboxylase and acetylcholinesterase. This compound can be used as a diagnostic tool for chronic kidney disease, specifically in cases of renal failure and polycystic kidney disease. The palladium complexes can be used for the synthesis of (+)(1S,2S,4R)-bicyclo[2.2.1]heptane-2-amine in high yield from malonic acid and ammonia.</p>Formule :C7H13NDegré de pureté :Min. 95%Masse moléculaire :111.18 g/mol2-Hydroxyamino-3-methyl-3H-imidazo[4,5-f]quinoline
CAS :2-Hydroxyamino-3-methyl-3H-imidazo[4,5-f]quinoline (2HAIQ) is a reactive compound that binds to DNA. It has been shown to be a potent inhibitor of the enzyme cytosolic protein kinase C, which plays an important role in regulating cellular metabolism. 2HAIQ also inhibits the activity of enzymes such as hydroxylases and polymerases. The binding of 2HAIQ to DNA is thought to inhibit transcription by preventing RNA polymerase from transcribing DNA. 2HAIQ may also inhibit replication by binding to the dinucleotide phosphate molecule, which is essential for DNA synthesis.Formule :C11H10N4ODegré de pureté :Min. 95%Masse moléculaire :214.22 g/mol1-(2,4-Dichlorophenyl)ethylamine
CAS :Formule :C8H9Cl2NDegré de pureté :>98.0%(GC)(T)Couleur et forme :Colorless to Light yellow clear liquidMasse moléculaire :190.073-Bromo-2-methylaniline
CAS :Formule :C7H8BrNDegré de pureté :>98.0%(GC)(T)Couleur et forme :Colorless to Brown clear liquidMasse moléculaire :186.054-Amino-3-methylbenzonitrile
CAS :Formule :C8H8N2Degré de pureté :>97.0%(GC)Couleur et forme :White to Gray to Brown powder to crystalMasse moléculaire :132.17N-Methyldi-n-octylamine
CAS :Formule :C17H37NDegré de pureté :>97.0%(GC)(T)Couleur et forme :Colorless to Light yellow to Light orange clear liquidMasse moléculaire :255.49Triamylamine (mixture of branched chain isomers)
CAS :Formule :C15H33NDegré de pureté :>97.0%(T)Couleur et forme :Colorless to Light yellow to Light orange clear liquidMasse moléculaire :227.44N-(2-Aminoethyl)-N-ethyl-m-toluidine
CAS :Formule :C11H18N2Degré de pureté :>98.0%(GC)Couleur et forme :Light orange to Yellow to Green clear liquidMasse moléculaire :178.28Ethanamine hydrobromide
CAS :Formule :C2H8BrNDegré de pureté :98%Couleur et forme :SolidMasse moléculaire :125.99561-(3-Dimethylaminopropyl)-3-ethylcarbodiimide
CAS :Formule :C8H17N3Degré de pureté :98%Couleur et forme :LiquidMasse moléculaire :155.24071-Dimethylamino-2-propyne
CAS :Formule :C5H9NDegré de pureté :98%Couleur et forme :LiquidMasse moléculaire :83.13179,9'-spirobi[fluoren]-2-amine
CAS :Formule :C25H17NDegré de pureté :99%Couleur et forme :SolidMasse moléculaire :331.4092Cyclopropylamine
CAS :Formule :C3H7NDegré de pureté :97%Couleur et forme :LiquidMasse moléculaire :57.0944N3-PEG1-CH2CH2NH2
CAS :Formule :C4H10N4ODegré de pureté :98%Couleur et forme :LiquidMasse moléculaire :130.1484Tetrabutylammonium chloride
CAS :Formule :C16H36ClNDegré de pureté :95%Couleur et forme :SolidMasse moléculaire :277.9167Diisopropylamine hydrochloride
CAS :Formule :C6H16ClNDegré de pureté :97%Couleur et forme :SolidMasse moléculaire :137.65091-Butanaminium, N,N,N-tributyl-, (T-4)-tetraoxorhenate(1-) (1:1)
CAS :Formule :C16H36NO4ReDegré de pureté :98%Couleur et forme :SolidMasse moléculaire :492.6683Diammonium hydrogenphosphate
CAS :Formule :H9N2O4PDegré de pureté :99%Couleur et forme :SolidMasse moléculaire :132.0562213-Azidopropan-1-amine Hydrochloride Salt
CAS :Formule :C3H9ClN4Degré de pureté :97%Couleur et forme :SolidMasse moléculaire :136.5834N-Nitrosodipropylamine
CAS :Formule :C6H14N2ODegré de pureté :98%Couleur et forme :LiquidMasse moléculaire :130.1882N-Methylethylamine
CAS :Formule :C3H9NDegré de pureté :98%Couleur et forme :SolidMasse moléculaire :59.1103Phenethylamine
CAS :Formule :C8H11NDegré de pureté :98%Couleur et forme :LiquidMasse moléculaire :121.17962-Heptanamine
CAS :Formule :C7H17NDegré de pureté :%Couleur et forme :LiquidMasse moléculaire :115.21667-Dimethylaminocoumarin-4-acetic acid
CAS :7-Dimethylaminocoumarin-4-acetic acid, catalog number T64950, CAS number 80883-54-1, is a valuable organic compound for life sciences research.Formule :C13H13NO4Couleur et forme :SolidMasse moléculaire :247.25N-Cyclohexyl-6-Methoxy-2-(5-Methylfuran-2-yl)imidazo[2,1-b][1,3]benzothiazol-1-Amine
CAS :Formule :C21H23N3O2SMasse moléculaire :381.497-Hydroxy-4-methylcoumarin-3-acetic acid, SE
CAS :7-Hydroxy-4-methylcoumarin-3-acetic acid, SE is a useful organic compound for research related to life sciences. The catalog number is T67683 and the CAS number is 96735-88-5.Formule :C16H13NO7Couleur et forme :SolidMasse moléculaire :331.28BODIPY 576/589
CAS :BODIPY 576/589 is a long wavelength biological labeled dye.Formule :C16H14BF2N3O2Couleur et forme :SolidMasse moléculaire :329.11(6-Chloro-5-methylpyridin-3-yl)methanamine hydrochloride
CAS :Degré de pureté :>95%Masse moléculaire :193.074p-Phenetidine
CAS :Formule :C8H11NODegré de pureté :>98.0%(GC)Couleur et forme :Colorless to Light orange to Yellow clear liquidMasse moléculaire :137.18DL-1-Phenylethylamine
CAS :Formule :C8H11NDegré de pureté :>98.0%(GC)(T)Couleur et forme :Colorless to Light yellow to Light orange clear liquidMasse moléculaire :121.18N,N,2,4,6-Pentamethylaniline
CAS :Formule :C11H17NDegré de pureté :>97.0%(GC)Couleur et forme :White to Yellow to Green clear liquidMasse moléculaire :163.26(3,5-Dimethylpyridin-2-yl)methanamine hydrochloride
CAS :Degré de pureté :>95%Masse moléculaire :172.655(4,6-Dichloropyridin-3-yl)methanamine hydrochloride
CAS :Degré de pureté :>95%Masse moléculaire :213.4925-Methoxy-2-methylaniline
CAS :Formule :C8H11NODegré de pureté :>98.0%(GC)(T)Couleur et forme :White to Yellow to Orange powder to lumpMasse moléculaire :137.18Difluoroamine
CAS :Produit contrôlé<p>Difluoroamine is a chemical compound that is used in the production of organic compounds. It has been shown to have high stability and detection sensitivity, which is attributed to its hydrogen bond forming ability. Difluoroamine also reacts with trifluoroacetic acid and hydrogen fluoride, both of which are strong acids. The reaction mechanism of difluoroamine involves the protonation of nitrogen atoms on the molecule followed by a nucleophilic attack on the electrophilic carbon atom that results in the formation of an amine group. This reaction can be carried out in a flow system as well as in a batch process. Difluoramine is an intermediate product during this process and can be converted into glycol ethers or nitrobenzene.</p>Formule :F2HNDegré de pureté :Min. 95%Masse moléculaire :53.01 g/mol1-(4-Amino-3,5-dichloro-phenyl)-2-ethanone
CAS :<p>1-(4-Amino-3,5-dichloro-phenyl)-2-ethanone is a beta-adrenergic agent. It has been used as a stable isotope label for the study of the pharmacokinetics and metabolism of drugs in humans. In addition, it has been shown to have a good stability profile in acidic solutions and can be easily converted to other derivatives by simple chemical methods. The compound's UV spectrum is linear with respect to concentration over the range from 0.1 to 1 mg/mL, with maxima at 227 nm and 254 nm. This compound has been characterized using analytical methods such as diffraction, spectroscopy, and chromatography.</p>Formule :C8H7Cl2NODegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :204.05 g/mol5-(2-methylpropyl)-3-(prop-2-ynylamino)cyclohex-2-en-1-one
CAS :<p>Please enquire for more information about 5-(2-methylpropyl)-3-(prop-2-ynylamino)cyclohex-2-en-1-one including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Degré de pureté :Min. 95%(R)-Amino carnitine
CAS :<p>(R)-Amino carnitine is a pancreatic enzyme that is used as an experimental treatment for fatty liver disease. It has been shown to inhibit the synthesis of fatty acids, which are the main components of triglycerides. The inhibition of this enzyme leads to a decrease in the production of triglycerides and their accumulation in the liver, thereby reducing hepatic steatosis. (R)-Amino carnitine also has an inhibitory effect on protein synthesis, which is important for the conversion of amino acids into proteins essential for cell division and growth. This mechanism may explain its beneficial effects on insulin resistance, obesity, and diabetes.</p>Formule :C7H16N2O2Degré de pureté :Min. 95%Masse moléculaire :160.21 g/molN-Ethyl-N-nitroso-1-[3-(trifluoromethyl)phenyl]-2-propanamine
CAS :<p>Usnic acid is a dietary supplement that has been shown to have beneficial effects on the liver, including hepatoprotective and anti-inflammatory properties. Usnic acid prevents mitochondrial membrane potential from decreasing, leading to an increase in adenine nucleotide content and improved mitochondrial function. Usnic acid also reverses the inhibition of monoamine neurotransmitters caused by chemical ionization and pharmacologic agents such as acetaminophen. Usnic acid also has been shown to be effective against hepatitis A virus (HAV) infection in CD-1 mice.</p>Formule :C12H15F3N2ODegré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :260.26 g/mol2-(4-(2,5-Dichlorophenylamino)-3,5-thiazolyl)acetic acid
CAS :<p>Please enquire for more information about 2-(4-(2,5-Dichlorophenylamino)-3,5-thiazolyl)acetic acid including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Degré de pureté :Min. 80%(S)-Chlorpheniramine maleate
CAS :<p>Histamine (H1) antagonist; used to treat allergies</p>Formule :C20H23ClN2O4Degré de pureté :Min. 95%Couleur et forme :White Off-White PowderMasse moléculaire :390.86 g/mol1-Heptylamine
CAS :<p>1-Heptylamine is a chiral dinucleotide phosphate. It has been shown to have a high affinity for the nicotinic acetylcholine receptors in the human body, where it acts as an agonist. This compound also has a variety of other reactions that are not yet fully understood. 1-Heptylamine is found naturally in the human body and can be detected in wastewater treatment plants.<br>1-Heptylamine has been used in analytical methods such as titration calorimetry and laser ablation to measure nitrogen atoms or chiral compounds respectively. The compound is also used as an amide or alkanoic acid, although its role in these reactions is unknown.</p>Formule :C7H17NDegré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :115.22 g/mol4,6-Diamino-2-thiopyrimidine
CAS :<p>4,6-Diamino-2-thiopyrimidine is a glycosidic bond that has been shown to inhibit the growth of bacteria in cell culture. It has also been shown to have an anticoagulant effect on human serum. The molecular weight of heparin is typically between 5000 and 15000 Da. In this study 4,6-Diamino-2-thiopyrimidine was found to be the most potent inhibitor of heparinase I activity with an IC50 of 1.5 mM. This compound is a trifluoroacetate salt that has a neutral pH and low solubility in water. It can be detected by electrochemical impedance spectroscopy (EIS). Hydrolysis by hydrochloric acid yields 4,6-diamino-2-thiopyrimidine trifluoroacetic acid as the only product. The chemical name for this substance is 4,6 diamino 2 thiop</p>Formule :C4H6N4SDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :142.18 g/molMonofluoroamine
CAS :Produit contrôlé<p>Monofluoroamine is a chemical substance with the chemical formula NH2F. It is a colorless liquid that is stable to both acidic and basic environments, but reacts with fluorine gas to form hydrofluoric acid. Monofluoroamine is used in the synthesis of pharmaceuticals, pesticides, and other organic compounds. This compound can be prepared by reacting ammonia with hydrogen fluoride at low temperature or by reacting ammonia with hydrogen fluoride at high pressure. The Friedel-Crafts reaction of monofluoroamine with an amide produces the corresponding amine. Monofluoroamine has been used as a conditioning agent in NMR spectroscopy experiments to remove the water signal from complex NMR spectra. In addition, this compound has been shown to have antiviral effects against HIV infection through its ability to inhibit protein synthesis.</p>Formule :FH2NDegré de pureté :Min. 95%Masse moléculaire :35.02 g/mol4-Aminobenzotrifluoride
CAS :<p>4-Aminobenzotrifluoride is a chemical compound that belongs to the group of nitroso compounds. It has been shown to have antiproliferation activity in vitro and in vivo. 4-Aminobenzotrifluoride is synthesized by reacting sodium nitrite with p-hydroxybenzoic acid in the presence of an organic acid, such as acetic acid or formic acid, to produce diazonium salt. The diazonium salt is then reacted with an inorganic acid, such as hydrochloric acid or sulfuric acid. This reaction produces 4-aminobenzotrifluoride and water.</p>Formule :C7H6F3NDegré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :161.12 g/molmethyl 2-(4,5-dimethoxy-2-(((3-(trifluoromethyl)phenyl)amino)sulfonyl)phenyl)acetate
CAS :<p>Please enquire for more information about methyl 2-(4,5-dimethoxy-2-(((3-(trifluoromethyl)phenyl)amino)sulfonyl)phenyl)acetate including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Degré de pureté :Min. 95%1-(2-Furyl)ethanamine
CAS :<p>1-(2-Furyl)ethanamine is a chiral compound that can be synthesized from readily available feedstocks. This synthetic method was developed to allow for the preparation of 1-(2-furyl)ethanamine in high yields and with good selectivity. The strategy involves the transfer of an ethyl group from an alcohol to a carbonyl group, which is catalyzed by gold nanoparticles. This process has been shown to be sustainable and provides an alternative for the use of more hazardous chemicals in the synthesis of this compound.</p>Formule :C6H9NODegré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :111.14 g/mol2-(2,6-Dichlorophenyl)-1-(hydroxyimino)ethylamine
CAS :<p>Please enquire for more information about 2-(2,6-Dichlorophenyl)-1-(hydroxyimino)ethylamine including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Degré de pureté :Min. 95%Cianopramine
CAS :<p>Cianopramine is a potent, selective inhibitor of the uptake of 5-hydroxytryptamine (5-HT) at 5-HT2 receptors. It has been shown to be effective in vivo models for chronic schizophrenia and has shown promising results in clinical trials with drug-naive patients. Cianopramine also inhibits the binding of drugs such as clomipramine and other tricyclic antidepressants to their receptor sites. In addition, cianopramine is a bicyclic heterocycle that binds to the human serum albumin with high affinity and specificity.</p>Formule :C20H23N3Degré de pureté :Min. 95%Masse moléculaire :305.42 g/molSimvastatin hydroxy acid ammonium salt
CAS :<p>Simvastatin is a hydrated, acylated statin that is used as a lipid-lowering drug. It inhibits HMG-CoA reductase, an enzyme that plays a central role in cholesterol biosynthesis. The reaction solution can be activated by mixing with an acyltransferase and the desired acyl group. Simvastatin has a toxicity profile that includes myopathy, rhabdomyolysis, and liver failure. Simvastatin also inhibits lipoprotein lipase and prevents the hydrolysis of triglycerides to fatty acids and glycerol. This leads to reduced levels of low-density lipoproteins (LDLs) and increased levels of high-density lipoproteins (HDLs). Simvastatin is converted into an amide form by enzymatic cleavage, which may lead to metabolic inhibition.</p>Formule :C25H43NO6Degré de pureté :Min. 98 Area-%Couleur et forme :White PowderMasse moléculaire :453.61 g/molTryptamine hydrochloride
CAS :Produit contrôlé<p>Tryptamine hydrochloride is a tryptamine that is used in the synthesis of various drugs with antiinflammatory properties. It has been shown to be a potent and selective antagonist of 5-HT2 receptors, with a pKi value of 7.4. Tryptamine hydrochloride has also been found to have an inhibitory effect on mitochondrial membrane potential and to decrease human serum 5-HT levels at physiological doses. This drug is structurally related to serotonin, which is believed to be a cause for its antiinflammatory activity.</p>Formule :C10H12N2HClDegré de pureté :Min. 95%Couleur et forme :Brown White Yellow Orange PowderMasse moléculaire :196.68 g/molTryptamine
CAS :Produit contrôlé<p>Please enquire for more information about Tryptamine including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C10H12N2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :160.22 g/molRef: 3D-FT10887
Produit arrêtéTrolamine salicylate
CAS :Produit contrôlé<p>Trolamine salicylate is a polymer film-forming drug that contains methyl anthranilate and trolamine. It is used in the treatment of skin cancer, as well as for the prevention of radiation-induced erythema. Trolamine salicylate has been shown to be effective in reducing the incidence of skin cancer caused by exposure to ultraviolet light at wavelengths below 320 nm. Trolamine salicylate forms a polymeric matrix on the surface of skin cells and acts as an anti-inflammatory agent. When applied topically, it undergoes chemical reactions with water vapor in the air and can be degraded by enzymes in human serum. The elimination rate of trolamine salicylate from body is about 1% per day and its half-life is about 20 days.<br>Trolamine salicylate is also used to treat acute dermatitis caused by contact with industrial chemicals such as phenols, amines, and ketones. It</p>Formule :C13H21NO6Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :287.31 g/mol7-Amino-4-methylcoumarin
CAS :<p>Fluorescent probe for AMC-based labelling of oligosaccharides or peptides</p>Formule :C10H9NO2Degré de pureté :Min. 98 Area-%Couleur et forme :Yellow PowderMasse moléculaire :175.18 g/mol2-Amino-3-chlorobenzotrifluoride
CAS :Formule :C7H5ClF3NDegré de pureté :>97.0%(GC)Couleur et forme :Colorless to Almost colorless clear liquidMasse moléculaire :195.572-Chloro-4-(trifluoromethoxy)aniline
CAS :Formule :C7H5ClF3NODegré de pureté :>97.0%(GC)(T)Couleur et forme :Colorless to Light yellow to Light orange clear liquidMasse moléculaire :211.57Ammonium hexafluorotitanate(iv)
CAS :<p>Ammonium hexafluorotitanate(IV) is a fine chemical that can be used as a reagent, building block, or intermediate in the synthesis of other chemicals. It is a versatile building block and reacts with other compounds to form complex compounds. Ammonium hexafluorotitanate(IV) is also an intermediate for the production of ammonium hexafluorophosphate (III), which is used in the manufacture of fertilizers. Ammonium hexafluorotitanate(IV) can be used as a reactant to produce titanium metal, which has many industrial applications.</p>Formule :F6H8N2TiDegré de pureté :Min. 95%Couleur et forme :White SolidMasse moléculaire :197.93 g/mol4-Dimethylaminobenzylamine dihydrochloride
CAS :<p>4-(Dimethylamino)benzylamine dihydrochloride (DMAA) is an inhibitor of the enzyme form of acetylcholinesterase. It has been used as a reagent in the biochemical, analytical and chromatographic detection of acetylcholine. DMAA can be used to measure acetylcholine levels in human serum, and has a kinetic time range of 0.5-2 hours. This chemical has potent inhibition against cytosolic but not plasma cholinesterase activity, which may be due to its binding to the active site of the enzyme. DMAA also inhibits lymphocytic leukemia cell growth by inducing chemiluminescence, which is a reaction that produces light from a chemical reaction in the absence of oxygen.</p>Formule :C9H14N2•(HCl)2Degré de pureté :Min. 95%Masse moléculaire :223.14 g/mol1-Aminopyrene (purified by sublimation)
CAS :Formule :C16H11NDegré de pureté :>99.0%(T)(HPLC)Couleur et forme :Light yellow to Amber to Dark green powder to crystalMasse moléculaire :217.274'-Amino-N-methylacetanilide
CAS :<p>4'-Amino-N-methylacetanilide is a chemical reagent that can be used as a building block for the synthesis of other chemicals. It has been shown to have a high quality and is useful in the research field. It has been used as an intermediate in the production of pharmaceuticals and pesticides, such as acetaminophen, chloramphenicol, and nitrofurantoin. 4'-Amino-N-methylacetanilide has also been used as a versatile building block for the synthesis of various complex compounds, including dyes and polymers.</p>Formule :C9H12N2ODegré de pureté :Min. 95 Area-%Couleur et forme :PowderMasse moléculaire :164.2 g/mol2,3-Dichlorobenzylamine
CAS :Formule :C7H7Cl2NDegré de pureté :>98.0%(GC)(T)Couleur et forme :Colorless to Light orange to Yellow clear liquidMasse moléculaire :176.04Neopentyl Glycol Bis(4-aminophenyl) Ether
CAS :Formule :C17H22N2O2Degré de pureté :>97.0%(T)Couleur et forme :White to Light yellow to Light orange powder to crystalMasse moléculaire :286.382-Amino-N-(4-chlorophenyl)benzamide
CAS :<p>Please enquire for more information about 2-Amino-N-(4-chlorophenyl)benzamide including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C13H11ClN2ODegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :246.69 g/mol2-(4,5-dimethoxy-2-(((4-(trifluoromethylthio)phenyl)amino)sulfonyl)phenyl)acetic acid
CAS :<p>Please enquire for more information about 2-(4,5-dimethoxy-2-(((4-(trifluoromethylthio)phenyl)amino)sulfonyl)phenyl)acetic acid including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Degré de pureté :Min. 95%2,2-Diaminoacetic Acid
CAS :Produit contrôléFormule :C2H6N2O2Couleur et forme :NeatMasse moléculaire :90.0811,3-Dimethyl-5-[(dimethylamino)methylene]2,4,6-(1H,3H,5H)-trioxopryimidine
CAS :Produit contrôléFormule :C9H13N3O3Couleur et forme :NeatMasse moléculaire :211.22Ethyl 3-(Butanoylamino)-2-oxobutanoate
CAS :Produit contrôlé<p>Applications Ethyl 3-(Butanoylamino)-2-oxobutanoate s a reactant used to prepare Vardenafil (V098001, 2HCl salt) which is a selective phosphodiesterase type 5 (PDE5) inhibitor.<br>References Bischoff, E., et al.: J. Urol., 165, 1316 (2001), Kim, N.N., et al.: Life Sci., 69, 2249 (2001), Kendirci, M., et al.: Expert Opin. Pharmacother., 5, 923 (2004)<br></p>Formule :C10H17NO4Couleur et forme :NeatMasse moléculaire :215.25N,N-Bis(hydroxymethyl)tert-butylamine
CAS :Produit contrôléFormule :C6H15NO2Couleur et forme :NeatMasse moléculaire :133.189Methyl4-aminomethyl-1-boc-piperidine-4-carboxylate
CAS :<p>Please enquire for more information about Methyl4-aminomethyl-1-boc-piperidine-4-carboxylate including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C13H24N2O4Degré de pureté :Min. 95%Masse moléculaire :272.34 g/mol(R,S)-Z-3-Amino-7-chloro-2-oxo-5-phenyl-1,4-benzodiazepine
CAS :Produit contrôlé<p>Please enquire for more information about (R,S)-Z-3-Amino-7-chloro-2-oxo-5-phenyl-1,4-benzodiazepine including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C23H18ClN3O3Degré de pureté :Min. 95%Masse moléculaire :419.86 g/molE-3-(Tributylstannyl)-2-propen-1-amine
CAS :Produit contrôlé<p>Please enquire for more information about E-3-(Tributylstannyl)-2-propen-1-amine including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C15H33NSnDegré de pureté :Min. 95%Masse moléculaire :346.14 g/mol4-Amino-2,2'-bipyridine
CAS :<p>Please enquire for more information about 4-Amino-2,2'-bipyridine including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C10H9N3Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :171.2 g/molRef: 3D-FA157853
Produit arrêté5-({[2-(4-Chlorophenyl)-1,3-oxazol-4-yl]methyl}thio)-1,3,4-thiadiazol-2-amine
CAS :<p>Please enquire for more information about 5-({[2-(4-Chlorophenyl)-1,3-oxazol-4-yl]methyl}thio)-1,3,4-thiadiazol-2-amine including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C12H9ClN4OS2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :324.81 g/molBis(hydroxyethyl)methylamine
CAS :Produit contrôlé<p>Bis(hydroxyethyl)methylamine is a chemical compound that is used in wastewater treatment. It is a strong base that can be used to remove nitrogen compounds, such as ammonia and nitrite, from wastewater. The process optimization of the thermal expansion of Bis(hydroxyethyl)methylamine has been studied. This chemical has been found to inhibit the growth of bacteria and fungi, which may be due to its ability to disrupt protein synthesis by interfering with the enzyme fatty acid synthase.</p>Formule :C5H13NO2Degré de pureté :Min. 95%Masse moléculaire :119.16 g/mol2-Chloro-N,N-dimethylethanamine hydrochloride hydrate
Produit contrôlé<p>Please enquire for more information about 2-Chloro-N,N-dimethylethanamine hydrochloride hydrate including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C4H13Cl2NODegré de pureté :Min. 95%Masse moléculaire :162.06 g/molAmmonium hydroxide - 28% NH3 in H2O
CAS :Produit contrôlé<p>Ammonium hydroxide is a chemical compound that is used to remove sodium salts from water in the treatment of wastewater. Ammonium hydroxide is also an analytical reagent for the determination of ammonium ions by titration, and is used as a polymerization catalyst. It can be used to produce glycol ethers, which are solvents with low toxicity and high boiling points. The reaction mechanism involves the conversion of hydrogen fluoride (HF) to hydrofluoric acid (HF), which reacts with ammonia to form ammonium fluoride (NH4F). This reaction produces heat and gives off water vapor. Ammonium hydroxide is a weak base, so it will react with any strong acid, such as hydrochloric acid or sulfuric acid, but not with weak acids such as acetic acid or phosphoric acid.</p>Formule :NH4OHDegré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :35.05 g/molAmmonium metavanadate
CAS :<p>Ammonium metavanadate is a compound with the chemical formula NH4VO3. It is an oxidizing agent that can be used in wastewater treatment to remove organic and inorganic contaminants from wastewater streams. The product has been shown to be a strong catalyst for the oxidation of ammonium, water vapor, and sulphur dioxide at ambient temperature. Ammonium metavanadate has been studied extensively as a catalyst for the removal of volatile organic substances (VOS) from gas streams, and is considered to be one of the most efficient catalysts currently available. Ammonium metavanadate also increases cytosolic calcium levels in human cells by promoting its release from intracellular stores.</p>Formule :NH4VO3Degré de pureté :Min. 98%Masse moléculaire :116.98 g/molRef: 3D-FA04101
Produit arrêté21-Amino-17-hydroxyprogesteroneHydrochloride
CAS :Produit contrôlé<p>21-Amino-17-hydroxyprogesteroneHydrochloride is a synthetic corticosteroid that is used to suppress the immune system in patients with severe allergies and those who have had an organ transplant. It binds to receptors on the surface of lymphocytes, preventing them from producing antibodies. It also inhibits the production of white blood cells by interfering with DNA synthesis and protein synthesis. 21-Amino-17-hydroxyprogesteroneHydrochloride is used to treat conditions such as sepsis, rheumatoid arthritis, lupus erythematosus, and myasthenia gravis. The medication is administered by injection into muscle or vein.</p>Formule :C21H32ClNO3Degré de pureté :Min. 95%Masse moléculaire :381.94 g/molTriethanolamine hydrochloride
CAS :Produit contrôlé<p>Triethanolamine hydrochloride, widely known as TEA-HCl, is a buffer used in biochemistry to maintain a stable pH in the range of 7.3 to 8.3 during processes like protein extraction and purification. They are also used in enzyme assays.</p>Formule :C6H15NO3·HClDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :185.65 g/molAmmonium Hexafluoroniobate
CAS :<p>Ammonium hexafluoroniobate is an organosilicon compound that does not react with water and is used as a solvent for other organics. It can be activated to form a reactive surface by treatment with a metal such as copper or aluminum, which can then be used in the treatment of metals. Ammonium hexafluoroniobate has been used as a diagnostic agent and diagnostic reagent in various reactions at different temperatures. It has also been used as the photoreceptor in electrophotographic printing processes, where it is exposed to light-sensitive material and then developed using organic solvents.</p>Formule :F6H4NNbDegré de pureté :Min. 95%Masse moléculaire :224.94 g/molAmmonium bromide
CAS :<p>Ammonium bromide is a chemical compound used in wastewater treatment. It is the active ingredient in a number of water purification methods, including those used to remove nitrates and heavy metals. Ammonium bromide also has inhibitory properties on the release of neurotransmitters from nerve cells. This inhibition of neurotransmitter release may be due to its ability to inhibit the action of neurokinin-1 receptor (NK-1) at the synapse. Ammonium bromide has been shown to have some toxic effects on the heart, although it does not appear to be toxic to other organs or tissues. Experimental solubility data shows that this solution is soluble in water, but insoluble in ethanol and ether. 4-Hydroxycinnamic acid, which can be found in coffee beans, has been shown to increase ammonium bromide solubility in water solutions by forming an inclusion complex with ammonium bromide.</p>Formule :H4BrNDegré de pureté :Min. 95%Couleur et forme :White SolidMasse moléculaire :97.94 g/mol2-Diethylamino)ethanol hydrochloride
CAS :Produit contrôlé<p>2-Diethylamino)ethanol hydrochloride is a chemical compound that is used in analytical chemistry as a stationary phase for thin layer chromatography. Sephadex G-100 was developed by Pharmacia & Upjohn Company and marketed in the 1970s. It has been shown to be useful in plasma mass spectrometry experiments, which measure the molecular weight of proteins and other compounds. The solubility of 2-diethylamino)ethanol hydrochloride has been studied using experimental solubility data, electrochemical impedance spectroscopy, and amines. The reaction mechanism of 2-diethylamino)ethanol hydrochloride is not well understood but it appears to involve potassium dichromate, hydrochloric acid, fluoroacetic acid, benzalkonium chloride and other chemicals.</p>Formule :C6H16ClNODegré de pureté :Min. 95%Masse moléculaire :153.65 g/molAmmonium tetrafluoroborate
CAS :<p>Ammonium tetrafluoroborate is a salt of the organic compound tetrafluoroborate and ammonium. It is a colorless solid that can be used as a chemical reagent. Ammonium tetrafluoroborate has a higher chemical stability than other salts of tetrafluoroborate, such as ammonium hexafluorophosphate and ammonium hexafluoroarsenate. Ammonium tetrafluoroborate is used to make the dinucleotide phosphate, which is an important component in DNA synthesis. In a redox potential test, ammonium tetrafluoroborate showed no electrochemical activity in water vapor at pH 7. Ammonium tetrafluoroborate reacts with trifluoroacetic acid to produce hydrogen fluoride and ammonium chloride. This reaction is reversible, which means that it can be used for the synthesis of ammonia gas from hydrogen and nitrogen gases or for the</p>Formule :NH4BF4Degré de pureté :Min. 98%Couleur et forme :White PowderMasse moléculaire :104.84 g/mol2-Amino-5-nitroindan hydrochloride
CAS :Produit contrôlé<p>Please enquire for more information about 2-Amino-5-nitroindan hydrochloride including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C9H10N2O2·HClDegré de pureté :Min. 95%Masse moléculaire :214.65 g/molAmmonium iron(III) sulfate dodecahydrate
CAS :<p>Ammonium iron(III) sulfate dodecahydrate is a water-soluble inorganic salt that can be used as an oxidizing agent to reduce the color of stains. It has been shown to have good growth kinetics and is easy to use. Ammonium iron(III) sulfate dodecahydrate is an inorganic acid that can be used as a reagent for extractions. It has been found to have good extraction yield and particle size, which makes it ideal for use in polymer films. Ammonium iron(III) sulfate dodecahydrate reacts with hydroxyl groups and forms p-hydroxybenzoic acid, which can be used in clinical pathology tests.</p>Formule :NH4Fe(SO4)2•(H2O)12Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :482.19 g/mol[3-(1-Piperidin-1-ylcyclohexyl)phenyl]amine hydrochloride
CAS :Produit contrôlé<p>3-(1-Piperidin-1-ylcyclohexyl)phenyl]amine hydrochloride is a ligand that binds to the acetylcholine receptor. 3-(1-Piperidin-1-ylcyclohexyl)phenyl]amine hydrochloride is an active analogue and has a high binding affinity for the cholinergic receptor. It has been shown to have a kinetic effect on the excitatory system, enhancing excitatory effects of acetylcholine without affecting inhibitory effects. 3-(1-Piperidin-1-ylcyclohexyl)phenyl]amine hydrochloride also has an antagonistic effect on modifiers of acetylcholine activity such as amantadine, but enhances the effects of other drugs, such as clonidine.</p>Formule :C17H26N2Degré de pureté :Min. 95%Masse moléculaire :258.4 g/molTetrahydro-a-(1-naphthalenylmethyl)-2-furanpropanoic Acid 2-(Diethylamino)ethyl Ester
CAS :Produit contrôlé<p>Tetrahydro-a-(1-naphthalenylmethyl)-2-furanpropanoic Acid 2-(Diethylamino)ethyl Ester is a fatty acid analog that has antimicrobial properties. It is used in the treatment of bone cancer, and can be used to diagnose and treat other diseases such as glomerular filtration rate, receptor binding, and malonic acid. Tetrahydro-a-(1-naphthalenylmethyl)-2-furanpropanoic Acid 2-(Diethylamino)ethyl Ester binds to receptors on cells, which leads to an increase in the amount of monoamine neurotransmitters released by the cells.</p>Formule :C24H33NO3Degré de pureté :Min. 95%Masse moléculaire :383.52 g/mol4-Aminoquinoline-2-one
CAS :<p>4-Aminoquinoline-2-one is a nonsteroidal anti-inflammatory drug that has tuberculostatic activity. It binds to the nitrogen atoms of the enzyme dihydropteroate synthase, which is involved in the synthesis of folic acid and DNA. This leads to an increase in reactive oxygen species and inflammation, which causes disease activity. 4-Aminoquinoline-2-one has been shown to be synergistic with monoclonal antibodies when used as a treatment for inflammatory diseases. In order for 4-aminoquinoline-2-one to be taken up by cells, it must bind to cellular uptake proteins through hydrogen bonds or disulfide bonds.</p>Formule :C9H8N2ODegré de pureté :Min. 95%Masse moléculaire :160.17 g/molAmmonium sulphate
CAS :<p>Ammonium sulphate is a white, crystalline solid that is used as a fertilizer and in the manufacture of paper. Ammonium sulphate is an ammonium salt of sulfuric acid with the chemical formula NH4HSO4. It is most often used as a fertilizer, although it has many other uses. Ammonium sulfate enhances the absorption of water vapor by plants, which increases their ability to grow. The optimum concentration for ammonium sulfate is from 20-40 g/L. Ammonium sulfate also increases the rate of synthesis of RNA and proteins in cells. This may be because it provides sulfur for enzymes involved in energy metabolism and protein synthesis. Ammonium sulfate has been shown to have synergistic effects with zirconium oxide, allowing more rapid dissolution in water than would be expected from its solubility alone. Ammonium sulfate reacts with bowel disease causing inflammation and ulceration due to its effect on bowel flora (e</p>Formule :H8N2O4SDegré de pureté :Min. 95%Couleur et forme :White Clear LiquidMasse moléculaire :132.14 g/molAmmonium sulfite
CAS :<p>Ammonium sulfite is a chemical compound that is used as an additive in wastewater treatment and as a reagent in organic synthesis. The reaction solution contains ammonium sulfite, sodium carbonate, and water. It has been shown to be toxic to animals when administered at high doses. Ammonium sulfite does not react with hydrogen fluoride or water and it is not soluble in anhydrous sodium. The polymerase chain reaction (PCR) technique has been used to study the reaction mechanism of ammonium sulfite. The reactions are catalysed by metal hydroxides such as magnesium hydroxide and aluminium hydroxide, which are present at the surface of the solid phase.</p>Formule :(NH4)2SO3Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :116.14 g/molDiammonium hydrogenphosphate
CAS :<p>Diammonium hydrogenphosphate is a monoammonium or diammonium phosphate salt of the phosphoric acid. It is used as a fertilizer and in analytical chemistry. Diammonium hydrogenphosphate is often used in wastewater treatment, because it has high solubility and low toxicity. Diammonium hydrogenphosphate can be synthesized by the reaction of ammonium phosphate with magnesium and ammonium hydroxide. This compound has synergic effects with magnesium, which may be due to its ability to reduce enzyme activities in the cell membrane. Diammonium hydrogenphosphate also has an effect on calcium-protein binding and phosphorus pentoxide crystallization.</p>Formule :H9N2O4PDegré de pureté :(%) Min. 99%Couleur et forme :PowderMasse moléculaire :132.06 g/mol6-Aminopicolinamide
CAS :<p>6-Aminopicolinamide is a metabolite of nicotinamide, which can be found in the urine of humans and animals. 6-Aminopicolinamide has been shown to have anti-leukemic activity against experimental leukemias in animals. The mechanism of action is not well understood but may involve inhibition of nucleotide synthesis or the inhibition of dehydrogenase activity. Clinical trials are underway to determine its efficacy as an anti-tumor agent.</p>Formule :C6H7N3ODegré de pureté :Min. 95%Masse moléculaire :137.14 g/mol1,2-Distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino(polyethylene glycol) 2000] (ammonium salt)
CAS :<p>1,2-Distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino(polyethylene glycol) 2000] (ammonium salt) is a PEG compound with two different functional groups (also known as heterobifunctional). Unlike homobifunctional PEG compounds (same functional group on both ends), this type of compounds are more versatile as have two different anchor points. 1,2-Distearoyl-sn-glycero-3-phosphoethanolamine-N-[amino(polyethylene glycol) 2000] (ammonium salt) is used as a linker and spacer to add a PEG moiety, via pegylation (a bioconjugation technique) to proteins, peptides, oligonucleotides, small molecules and nanoparticles.</p>Formule :(C2H4O)nC44H87N2O10P•H3NDegré de pureté :Min. 95%Couleur et forme :White PowderRef: 3D-FD157101
Produit arrêté2-Dimethylaminoethanol (+)-bitartrate salt
CAS :Produit contrôlé<p>2-Dimethylaminoethanol (+)-bitartrate salt is a potent, reversible inhibitor of protein synthesis that binds reversibly to the 50S ribosomal subunit. It is used in regulatory toxicology and clinical pathology as a positive control for the study of chronic toxicity and long-term effects. 2-Dimethylaminoethanol (+)-bitartrate salt has shown no treatment effect on ovary weight or estrous cycle length in female Sprague-Dawley rats after chronic exposure and long-term exposure at doses up to 1,000 mg/kg/day. This drug has also shown no effect on rat fertility or reproductive performance, indicating it does not cause reproductive toxicity.</p>Formule :C4H11NO·C4H6O6Couleur et forme :White Off-White PowderMasse moléculaire :239.22 g/molN-(2-Amino-ethyl)-2-(benzyl-phenyl-amino)-acetamide
CAS :<p>Please enquire for more information about N-(2-Amino-ethyl)-2-(benzyl-phenyl-amino)-acetamide including the price, delivery time and more detailed product information at the technical inquiry form on this page</p>Formule :C17H21N3ODegré de pureté :Min. 95%Couleur et forme :White PowderMasse moléculaire :283.37 g/mol






