APIs pour la recherche et les impuretés
Sous-catégories appartenant à la catégorie "APIs pour la recherche et les impuretés"
- Acides Aminés et Dérivés(12.331 produits)
- Anthraquinones et Dérivés(404 produits)
- Dérivés du Benzimidazole et de l’Imidazole(10.435 produits)
- Dérivés des Benzodiazépines(333 produits)
- Glucides et Glycoconjugués(5.047 produits)
- Esters et Dérivés(42.250 produits)
- Acides Gras et Dérivés Lipidiques(32.401 produits)
- Flavonoïdes et Polyphénols(17.080 produits)
- Radicaux Libres et Agents Oxydants/Réducteurs(212 produits)
- Cétones et Dérivés(2.400 produits)
- Antibiotiques Naturels et Semi-Synthétiques(6.371 produits)
- Nitriles et Dérivés Cyano(3.068 produits)
- Nitrosamines et Dérivés(55 produits)
- Nucléosides et Nucléotides(3.470 produits)
- Phosphates et Phosphonates Organiques(1.199 produits)
- Sulfonates et Sulfates Organiques(10.430 produits)
- Composés Organométalliques(4.421 produits)
- Autres(6.295 produits)
- Peptides et Protéines(3.143 produits)
- Polymères et Dérivés(100 produits)
- Dérivés des Purines et Pyrimidines(8.934 produits)
- Dérivés de Quinazoline et de Quinoléine(65.934 produits)
- Quinones et Dérivés(24.356 produits)
- Sels et Dérivés d’API(80.667 produits)
- Stéroïdes et Dérivés(4.946 produits)
- Sulfamides et Dérivés(2.587 produits)
- Terpénoïdes et Dérivés(3.843 produits)
- Thiazolidinediones et Thiopyranes(2.753 produits)
- Composés β-Adrénergiques(230 produits)
58049 produits trouvés pour "APIs pour la recherche et les impuretés"
Ciprofibrate-o-β-glucuronide
CAS :Ciprofibrate-o-β-glucuronide is the major metabolite of ciprofibrate in humans. It can be detected in urine by a variety of analytical methods, including magnetic resonance spectroscopy, voltammetry, and microscopy. Ciprofibrate-o-β-glucuronide is an enantiomer of ciprofibrate and has been shown to have an enzymatic hydrolysis rate of 0.07% per hour. This hydrolysis process is catalyzed by cytochrome P450 enzymes. Ciprofibrate-o-β-glucuronide is also found in pharmaceutical formulations and excreted from the body with a half life of 4 hours.
Formule :C19H22Cl2O9Degré de pureté :Min. 95%Masse moléculaire :465.3 g/mol1-(4-((2,4-Dimethylphenyl)thio)phenyl)piperazine hydrobromide
1-(4-((2,4-dimethylphenyl)thio)phenyl)piperazine hydrobromide is a synthetic drug that has been used in the research and development of drugs. It is a metabolite of 1-(4-((2,4-dimethylphenyl)thio)-phenyl)piperazine (1DMPP). The impurity standard for 1-(4-((2,4-dimethylphenyl)thio)-phenyl)piperazine hydrobromide is 0.5% (w/w). It has been shown to be effective in metabolism studies.Degré de pureté :Min. 95%Bupivacaine N-oxide hydrochloride
CAS :Bupivacaine N-oxide is a synthetic local anesthetic drug. It is a metabolite of bupivacaine and has been shown to be active in animal studies. The chemical name for bupivacaine N-oxide is 4-oxo-2,6,8-trimethylquinoline. Bupivacaine N-oxide hydrochloride (N06) is an impurity standard that meets the USP/BP requirements for purity and quality as well as the pharmacopoeia standards for analytical methods. The compound has been synthesized by custom synthesis and research and development from Impurity Standard Bupivacaine Hydrochloride (CAS No. 1796927-05-3). The compound is used in the synthesis of drug products, including analgesics and anaesthetics. The compound can be used in analytical studies due to its high purity and quality standards.
Formule :C18H29ClN2O2Degré de pureté :Min. 95%Masse moléculaire :340.9 g/molPirtenidine
CAS :Pirtenidine is a potent and selective kinase inhibitor that has been shown to inhibit the activity of cyclin-dependent kinases. It has demonstrated promising results in preclinical studies as an anticancer agent, inducing apoptosis in cancer cells. Pirtenidine is an analog of protein kinase inhibitors, which have been used to treat various types of tumors. It has been found to be effective against human cancer cell lines and has shown significant tumor growth inhibition in animal models. Pirtenidine has also been reported to be a potent urine inhibitor of Chinese hamster ovary cells, making it a promising candidate for the treatment of urinary tract cancers.
Formule :C21H38N2Degré de pureté :Min. 95%Masse moléculaire :318.5 g/mol(E)-2-Furaldehyde, (2,4-dinitrophenyl)hydrazone
CAS :Please enquire for more information about (E)-2-Furaldehyde, (2,4-dinitrophenyl)hydrazone including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C11H8N4O5Degré de pureté :Min. 95%Masse moléculaire :276.2 g/molDiltiazem EP Impurity H
CAS :Diltiazem EP Impurity H is a metabolite of diltiazem that is used as an impurity standard for the drug product. Diltiazem EP Impurity H has a purity level of 99% and is soluble in water. It is synthesized by reacting diltiazem with nitric acid, then hydrolyzing the product to form the desired compound. Diltiazem EP Impurity H can be used as an analytical reference material or a pharmacopoeia for HPLC standards.
Diltiazem EP Impurity H is a metabolite of diltiazem that is used as an impurity standard for the drug product. Diltiazem EP Impurity H has a purity level of 99% and is soluble in water. It is synthesized by reacting diltiazem with nitric acid, then hydrolyzing the product to form the desired compound. Diltiazem EP Impurity H can be used as an analytical reference materialFormule :C17H18N2O3SDegré de pureté :Min. 95%Masse moléculaire :330.4 g/molAdx 10059 hydrochloride
CAS :Adx 10059 hydrochloride is a synthetic drug that is used in research and development. It is an impurity standard for the manufacture of drugs and drug products. Adx 10059 hydrochloride is also used as a high-purity reagent in pharmacopoeia and drug development, as well as in analytical chemistry. The compound has been shown to be metabolized by the liver, with metabolites being excreted through urine. This product may also have effects on acetylcholine release, which may make it useful in the treatment of Parkinson's disease.
Formule :C15H14ClFN2Degré de pureté :Min. 95%Masse moléculaire :276.73 g/mol1-Phenyl-1,2,3,4-tetrahydro-isoquinoline
CAS :1-Phenyl-1,2,3,4-tetrahydro-isoquinoline is a synthetic compound which has been used as a lead compound for the development of drugs with dopamine β-hydroxylase inhibitory activity. In vitro studies have shown that 1-phenyl-1,2,3,4-tetrahydro-isoquinoline inhibits human serum dopamine β-hydroxylase and can be used to study the possible role of this enzyme in Parkinson's disease. This drug is racemized in the body and has been found to be effective against Parkinson's disease in rats. It is also an enantiomer that has industrial applications for the production of polyurethane foam insulation coatings.
Formule :C15H15NDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :209.29 g/mol(3R,5S,6E)-7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2-methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5-dihydroxy- 6-heptenoic acid sodium salt
CAS :(3R,5S,6E)-7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2-methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5-dihydroxy- 6-heptenoic acid sodium salt is a synthetic drug product. It is an impurity standard in the synthesis of Metabolism studies. The CAS number is 1714147-50-8 and the chemical name is (3R,5S,6E)-7-[4-(4-fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2 methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5dihydroxyheptenoic acid sodium salt. The molecular weight is 781
Formule :C25H33FN3NaO7SDegré de pureté :Min. 95%Masse moléculaire :561.6 g/molRemdesivir impurity 5
CAS :Remdesivir impurity 5 is a metabolite that is generated in the body following metabolism and excretion of remdesivir. It has been shown to be present in urine, plasma, and cerebrospinal fluid following administration of remdesivir. Remdesivir impurity 5 binds to the active site of HIV reverse transcriptase with a Kd value of 0.5 nM. The chemical name for this compound is (5R)-3-[[3-[(2S,4R)-2-amino-4-(2-methylpropyl)piperidin-1-yl]-1H-indol-6-yl]carbonyl]benzoic acid methyl ester.
Formule :C21H27N2O7PDegré de pureté :Min. 95%Masse moléculaire :450.42 g/mol(+/-)N-Methyl-y-[3-(trifluoromethyl)-phenoxy]benzenepropanamine hydrochloride
CAS :N-Methyl-y-[3-(trifluoromethyl)-phenoxy]benzenepropanamine hydrochloride is a synthetic drug product that has been shown to be metabolized in humans. It is an impurity standard for HPLC and analytical methods. This compound is used as a research chemical in the development of drugs, and is also used as a pharmacopoeia reference standard.Formule :C17H18F3NO·HClDegré de pureté :Min. 95%Masse moléculaire :345.79 g/molSimvastatin impurity K
Simvastatin impurity K is a research and development substance that is used for the synthesis of drug products. This compound is custom synthesized, and its CAS number is 607-33-0. It has been synthesized with high purity, and it meets the pharmacopoeia requirements. Simvastatin impurity K is a metabolite of simvastatin, which is a synthetic drug that has been developed for the treatment of cardiovascular diseases. The compound has been shown to be similar to other metabolites in terms of metabolic studies, but it does not have any niche applications as an analytical standard or natural product.
Formule :C25H40O5Degré de pureté :Min. 95%Masse moléculaire :420.58 g/mol2,2'-(1,4-Piperazinediyl)bis[6,7-dimethoxy-4-quinazolinamine]
CAS :2,2'-(1,4-Piperazinediyl)bis[6,7-dimethoxy-4-quinazolinamine] is a chemical compound that is used as a lead to develop new drugs against malaria. It inhibits the growth of plasmodium falciparum and has been shown to be active in high-throughput screening assays. 2,2'-(1,4-Piperazinediyl)bis[6,7-dimethoxy-4-quinazolinamine] may serve as an active molecule for the treatment of malaria in combination with other antiplasmodial agents. The drug discovery process prioritized this compound because it is an asexual stage inhibitor and has gametocyte inhibitory activities.
Formule :C24H28N8O4Degré de pureté :Min. 95%Masse moléculaire :492.53 g/molKM91104
CAS :KM91104 is a potent inhibitor of protein kinases that has been shown to induce apoptosis in cancer cells. It is derived from a traditional Chinese medicinal plant and has demonstrated anticancer activity against various human cancer cell lines. KM91104 specifically targets the cell cycle and inhibits tumor growth by blocking the activity of certain proteins involved in cell division. This compound has also been found in urine samples, indicating that it may have potential as a diagnostic marker for cancer. Overall, KM91104 shows promising potential as an effective and selective inhibitor for the treatment of cancer.
Formule :C14H12N2O4Degré de pureté :Min. 95%Masse moléculaire :272.26 g/molo-Desphenyl sofosbuvir
CAS :o-Desphenyl sofosbuvir is a drug product that has been custom synthesized for research purposes. It is made of pure natural ingredients and does not contain any impurities. o-Desphenyl sofosbuvir is a metabolite from the synthesis of sofosbuvir, a drug used to treat hepatitis C. It can be used in pharmaceutical research and development as an analytical standard for HPLC.
Formule :C16H25FN3O9PDegré de pureté :Min. 95%Masse moléculaire :453.36 g/molRocuronium EP Impurity G
CAS :Rocuronium EP Impurity G is a drug product that contains an impurity of Rocuronium EP. It is a synthetic, high purity HPLC standard with a purity greater than 99.5% and a CAS number of 119302-20-4. This compound has been researched for use in the development of drugs to treat conditions such as pain, anxiety, and depression. Rocuronium EP Impurity G is a metabolite that has been found in human urine after administration of rocuronium bromide. The metabolism of this substance has not been fully elucidated yet but it may be hydrolyzed by esterases or glucuronidases, oxidized by cytochrome P450 enzymes, reduced by glutathione reductase, or conjugated with glucuronic acid.
Formule :C27H46N2O3Degré de pureté :Min. 95%Masse moléculaire :446.67 g/molRef: 3D-IR178406
Produit arrêtécis-Tadalafil
CAS :Cis-Tadalafil is a potent inhibitor of phosphodiesterase 5, which is used to treat erectile dysfunction (ED) and primary pulmonary hypertension (PPH). It works by increasing blood flow to the penis, allowing men with ED to achieve and maintain an erection. Cis-Tadalafil is also used to treat symptoms of prostatic hyperplasia (enlarged prostate) in men. This drug has been shown to be effective in treating PPH by reducing pulmonary arterial pressure and improving exercise capacity. Cis-Tadalafil belongs to the carboline class of drugs and is a phosphodiesterase 5 inhibitor that selectively inhibits cGMP-specific phosphodiesterase type 5 (PDE5). This drug has been shown to be highly effective in treating both ED and PPH with minimal side effects.
Formule :C22H19N3O4Degré de pureté :Min. 95%Couleur et forme :White/Off-White SolidMasse moléculaire :389.4 g/molRef: 3D-FT27987
Produit arrêté3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride
CAS :3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride is a versatile compound with various characteristics and applications. It has been found to have diverse effects on different biological processes. This compound has shown potential as an antimuscarinic agent, which means it can block the action of acetylcholine at muscarinic receptors in the body.
Formule :C19H25ClN2O2Degré de pureté :Min. 95%Masse moléculaire :348.9 g/molN-Desacetyl thiocolchicoside
CAS :N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.
Formule :C25H31NO9SDegré de pureté :Min. 95%Masse moléculaire :521.58 g/molN-Benzyl albuterol
CAS :N-Benzyl albuterol is a drug product that is custom synthesized to be of high purity with an analytical standard. It is used in research and development, pharmaceutical development, and as a pharmacopoeia or analytical standard. N-Benzyl albuterol has been found to be a metabolite of the drug product Albuterol Sulfate. It is also used in metabolism studies and natural product research. The CAS number for this compound is 24085-03-8.
Formule :C20H27NO3Degré de pureté :Min. 95%Masse moléculaire :329.4 g/molRoflumilast Impurity A
CAS :Roflumilast impurity A is a metabolite of roflumilast. It is a drug product that is used as an analytical standard for the determination of roflumilast in HPLC analysis. Roflumilast impurity A is not natural and is synthetic. It has been shown to be a substrate for CYP1A2, CYP2C8, CYP2C9, and CYP3A4 enzymes. Studies have shown that it may be involved in the metabolism of roflumilast through hydroxylation and deamination.
Formule :C16H14Cl2N2O3Degré de pureté :Min. 95%Masse moléculaire :353.2 g/molRef: 3D-IR168438
Produit arrêtéCiprofloxacin ep impurity C
CAS :Ciprofloxacin ep impurity C is a synthetic compound. It is used as a research and development standard in the synthesis of ciprofloxacin. The purity of this compound is high, and it has been tested for metabolism studies. This impurity can be detected by HPLC using an analytical method with a natural reference substance. This impurity has not been evaluated for pharmacopoeia or CAS number.
Formule :C15H16FN3O3Degré de pureté :Min. 95%Masse moléculaire :305.30 g/molDesfluoro ezetimibe
CAS :Desfluoro ezetimibe is a synthetic cholesterol-lowering drug that inhibits intestinal cholesterol absorption. It is chemically synthesized, and the process includes the introduction of fluorine at the 3-position of the C-ring. Desfluoro ezetimibe is not metabolized in humans, but it may be subject to oxidative degradation. The product is also subject to oxidation by light and air, which may result in formation of impurities. The drug substance has been validated as well as its isomers and efficiencies in mass spectrometry detection.
Formule :C24H22FNO3Degré de pureté :Min. 95%Couleur et forme :White To Off-White SolidMasse moléculaire :391.43 g/molRef: 3D-FD21193
Produit arrêté(3S,4R)-Tofacitinib
CAS :(3S,4R)-Tofacitinib is a rhombic and paramagnetic compound with a Curie point of approximately 10.6°C. It is soluble in nonpolar solvents such as benzene and toluene. (3S,4R)-Tofacitinib has been shown to have magnetic properties that are dependent on the temperature and the frequency of the applied magnetic field. The paramagnetic resonance spectra were observed at 18°C and 32°C, while the paramagnetic resonance spectrum was observed at -2°C. The octahedral interactions are likely due to the presence of six different types of iron ions in the crystal structure.
Formule :C16H20N6ODegré de pureté :Min. 95%Masse moléculaire :312.37 g/molRef: 3D-STB57848
Produit arrêtéEmpagliflozin S-furanose
CAS :Empagliflozin S-furanose is a Custom synthesis drug product. It is an analytical standard with CAS No. 1620758-32-8, and it is used in research and development of new drugs. Empagliflozin S-furanose has been found to be a metabolite of empagliflozin, a drug that is used to treat type 2 diabetes mellitus. It is also used as an impurity standard for HPLC analysis of empagliflozin because it does not have any biological activity.
Formule :C23H27ClO7Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :450.91 g/molN-Hydroxymethyl Sumatriptan
CAS :N-Hydroxymethyl Sumatriptan is an analytical standard and a research and development impurity. It is also used as an API impurity in drug product manufacturing. N-Hydroxymethyl Sumatriptan can be synthesized by reacting the parent drug with hydroxyl radicals, which is a process that yields no side products. N-Hydroxymethyl Sumatriptan can be found in the following pharmacopoeia: United States Pharmacopoeia (USP) 11>, European Pharmacopoeia (EP), Japanese Pharmacopoeia (JP)13>, British Pharmacopoeia (BP), and Chinese Pharmacopiae (CPC).
Formule :C15H23N3O3SDegré de pureté :Min. 95%Masse moléculaire :325.43 g/molSimvastatin acid
CAS :Simvastatin acid is the active form of simvastatin, a drug used to lower blood cholesterol levels. Simvastatin acid inhibits HMG-CoA reductase, the enzyme that converts HMG-CoA to mevalonate. This conversion is a rate-limiting step in the synthesis of cholesterol and other lipids. Simvastatin acid binds to polymerase chain and drug transporter proteins, which leads to cell lysis. The concentration–time curve for simvastatin acid is linear and the half-life is approximately 12 hours. When simvastatin acid is administered with drugs that are potent inducers of CYP3A4 or UGT1A1 enzymes, there may be an increased risk for drug interactions. Simvastatin acid has shown no significant human pharmacokinetic interactions with food or grapefruit juice at doses up to 200 mg/day. There are limited data on the pharmacokinetics of simvastatin
Formule :C25H40O6Degré de pureté :Min. 95%Couleur et forme :White PowderMasse moléculaire :436.58 g/mol(S)-Rabeprazole sodium
CAS :(S)-Rabeprazole sodium is an anticancer drug that acts as a kinase inhibitor. It is an analog of Rabeprazole and has been shown to inhibit the growth of cancer cells in vitro and in vivo. (S)-Rabeprazole sodium inhibits the activity of kinases, which are enzymes that play a key role in cell signaling pathways. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. (S)-Rabeprazole sodium has been tested against various types of cancer, including Chinese hamster ovary cells and tumor xenografts in mice. It has also been shown to inhibit elastin degradation, which is important for preventing metastasis of cancer cells. (S)-Rabeprazole sodium may be a promising candidate for the development of new anticancer drugs that target specific kinases and proteins involved in cancer cell growth and survival.
Formule :C18H21N3O3S•NaDegré de pureté :Min. 95%Masse moléculaire :382.43 g/molTofacitinib dihydro impurity
CAS :Tofacitinib dihydro impurity is a research and development impurity standard for the synthesis of Tofacitinib. It is a custom synthesis with high purity, pharmacopoeia grade, and synthetic. This product is also used in drug development for metabolism studies and analytical applications.
Formule :C16H22N6ODegré de pureté :Min. 95%Masse moléculaire :314.39 g/molRef: 3D-QQC97235
Produit arrêté(4-Chlorophenyl)diphenylmethanol
CAS :Please enquire for more information about (4-Chlorophenyl)diphenylmethanol including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C19H15ClODegré de pureté :Min. 95%Masse moléculaire :294.8 g/molN-Nitroso dorzolamide
N-Nitroso dorzolamide is a chemical compound used as an intermediate in the synthesis of dorzolamide, a carbonic anhydrase inhibitor used in the treatment of glaucoma and ocular hypertension.
Formule :C10H15N3O5S3Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :353.44 g/mol2-(2-Amino-5-bromobenzoyl)pyridine
CAS :2-(2-Amino-5-bromobenzoyl)pyridine (2ABBP) is a chemical compound with the molecular formula C10H7BrN3. It is a glucuronide conjugate of 2-amino-5-bromobenzoic acid and has been used as an immunological reagent in the form of a monoclonal antibody. 2ABBP binds to dryopteris, which is a plant species that contains polyphenols called pteridines. 2ABBP has been shown to have anti-inflammatory properties in rat liver microsomes and cell culture experiments. The mechanism of action may involve inhibition of cyclooxygenase enzymes, which are involved in prostaglandin synthesis. 2ABBP also binds to human serum albumin and chaperones, proteins that bind other proteins or small molecules. The biological activity of 2ABBP may be due to its ability to form coval
Formule :C12H9BrN2ODegré de pureté :Min. 95%Masse moléculaire :277.12 g/molRef: 3D-IA17613
Produit arrêtéSacubitril Impurity 2
CAS :Sacubitril Impurity 2 is a drug product that is an analytical impurity in Sacubitril. This impurity can be found in Sacubitril as a result of natural processes or as an API impurity during the synthesis process. Sacubitril Impurity 2 has been shown to have activity in Metabolism studies, Natural, and Custom synthesis. It has been shown to be a Synthetic impurity standard and HPLC standard. Sacubitril Impurity 2 is used for research and development purposes for the drug development industry, specifically for the niche market. It is also used as an analytical standard for pharmacopoeia methods.
Formule :C24H27NO4Degré de pureté :Min. 95%Masse moléculaire :393.48 g/molRef: 3D-IS181152
Produit arrêtéLinagliptin impurity G
CAS :Linagliptin impurity G is an impurity in the drug product Linagliptin. It is a natural substance and its CAS number is 668270-11-9. Impurity G can be synthesized from L-phenylalanine and cyclohexane carboxaldehyde in a two step process. The first step involves the reaction of L-phenylalanine with cyclohexane carboxaldehyde to yield methylcyclohexanecarboxylate, which then undergoes hydrolysis to give phenylcyclohexanol. In the second step, phenylcyclohexanol reacts with hydrochloric acid to produce phenylcyclohexanone, which is then oxidized with hydrogen peroxide to yield impurity G. Impurity G can also be found in the pharmacopoeia as a high purity HPLC standard for linagliptin.
Formule :C25H28N8O2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :472.54 g/molRef: 3D-FA146003
Produit arrêtéPramipexole EP Impurity C
CAS :Pramipexole EP Impurity C is a synthetic impurity that is used as an impurity standard in the manufacture of Pramipexole EP. It is also used as a research and development tool for drug product, custom synthesis, CAS No. 1973461-14-1, and analytical studies. This compound has been shown to be a metabolite of Pramipexole EP and may have pharmacological properties. Pramipexole EP Impurity C has been found to inhibit the growth of certain bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA) isolates.
Formule :C20H32N6S2Degré de pureté :Min. 95%Ref: 3D-FP165425
Produit arrêtéAcarbose Impurity E
CAS :Acarbose Impurity E is an impurity found in acarbose. It is a natural, API impurity and is a synthetic impurity standard. Acarbose Impurity E has been used in drug development research and development, as well as in the HPLC analysis of acarbose to generate a pharmacopoeia-grade purity standard.
Degré de pureté :Min. 95%Ivermectin impurity I
CAS :Ivermectin impurity I is an analytical standard that is used for pharmacopoeia and custom synthesis. It is a natural metabolite of the drug Ivermectin, which has been shown to have anti-inflammatory properties in mice. Ivermectin impurity I binds to nicotinic acetylcholine receptors, leading to muscle paralysis and death. This compound is found in high purity for research and development purposes.
Formule :C48H74O14Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :875.09 g/molRocuronium Bromide EP Impurity F Bromide
CAS :Rocuronium Bromide EP Impurity F Bromide is an impurity found in Rocuronium Bromide EP. It is a natural component of the drug product, which is a synthetic drug. The metabolite of this impurity is also found in the natural product, although at much lower concentrations. This impurity has been shown to be present as an analytical impurity in the API and custom synthesis process. This impurity standard has been synthesized synthetically for use in drug development and research and development, as well as for use in HPLC standards.Formule :C34H55N2O4·BrDegré de pureté :Min. 95%Masse moléculaire :635.72 g/molRef: 3D-IR178405
Produit arrêtéTerbinafine dihydrochloride
CAS :Terbinafine is a drug used in the treatment of onychomycosis, tinea versicolor and dandruff. It belongs to the group of medicines known as antifungals and inhibits the growth of fungi by inhibiting their ability to make proteins. Terbinafine dihydrochloride is a form of terbinafine that is more soluble in water than terbinafine hydrochloride and can be used as a lubricant. Terbinafine hydrochloride is an industrial product that is used as a disintegrant in tablets and capsules.
Formule :C36H40N2Degré de pureté :Min. 95%Masse moléculaire :500.7 g/molPiperacilloic acid
CAS :Piperacilloic acid is a synthetic compound that exhibits antibacterial activity. It has been shown to be effective against human pathogens, including urothelial carcinoma and human serum. Piperacilloic acid binds to the amino acids lysine and arginine in bacterial proteins and inhibits protein synthesis by inhibiting the function of enzymes that require these amino acids for their activity. The potency of piperacillin is low, but it is activated by hydrolysis in the acidic environment of the stomach or intestinal tract. Piperacilloic acid also has potential as a contraceptive agent because it may inhibit transcriptional regulation of genes that are involved in sperm production.
Formule :C23H29N5O8SDegré de pureté :(Elemental Analysis) Min. 90 Area-%Couleur et forme :PowderMasse moléculaire :535.57 g/molRef: 3D-FP27061
Produit arrêtéDicyclopropylamine hydrochloride
CAS :Dicyclopropylamine hydrochloride is a tyrosine kinase inhibitor that blocks the activity of jak2. It is an innovative molecule with the potential to be used in cancer treatment. Dicyclopropylamine hydrochloride has been shown to inhibit activation of tyrosine kinases, which are involved in cell signaling and proliferation. Dicyclopropylamine hydrochloride also has anti-inflammatory properties, which may be due to its ability to inhibit prostaglandin synthesis. This drug is not expected to have any toxicity or side effects because it can be easily metabolized by the liver.br>br> Dicyclopropylamine hydrochloride is a white solid with a melting point of 175°C. It has no detectable odor, and it is soluble in water and ethanol. The impurities found in this compound include myristic acid and amines, which can cause inflammatory diseases.br>br> D
Formule :C6H11N•HClDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :133.62 g/molOxacyclohexane open ring tacrolimus
CAS :Please enquire for more information about Oxacyclohexane open ring tacrolimus including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C44H71NO13Degré de pureté :Min. 95%Masse moléculaire :822.04 g/molTriethylene glycol flufenamate
CAS :Etofenamate impurity
Formule :C20H22F3NO5Degré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :413.39 g/molChlorthalidone impurity E
CAS :Chlorthalidone impurity E is an analytical standard for the HPLC analysis of chlorthalidone in pharmaceutical drug products and is a metabolite of chlorthalidone. Chlorthalidone impurity E is an API impurity that can be found in the synthesis of chlorthalidone, and it has been detected as a minor component in certain drug products. It is important to have an accurate specification for this compound, since it can affect the pharmacological properties of the drug product. The purity level of this compound must be at least 98% or greater to ensure that there are no contaminants present. This compound is also a metabolite of chlorthalidone and is used as a pharmacopoeia reference substance for testing equipment calibration.END>
Formule :C14H11ClN2O3SDegré de pureté :Min. 95%Masse moléculaire :322.77 g/molD-6-Cyano-6-norlysergic acid methyl ester
CAS :Please enquire for more information about D-6-Cyano-6-norlysergic acid methyl ester including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C17H15N3O2Degré de pureté :Min. 95%Masse moléculaire :293.32 g/molAtorvastatin calcium trihydrate EP Impurity G
CAS :Atorvastatin is a drug that belongs to the class of statins. It is used for the treatment of high cholesterol levels and other related diseases, such as cardiovascular disease. Atorvastatin calcium trihydrate EP Impurity G is an impurity that may be present in atorvastatin calcium trihydrate. This compound has not been found to have any pharmacological activity.
Formule :C34H37FN2O5Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :572.67 g/molRef: 3D-IA182820
Produit arrêtéGS 441524 triphosphate
CAS :Triphosphorylated form of an antiviral nucleoside analog with activity against zoonotic feline infectious peritonitis virus (FIPV) and severe acute respiratory syndrome (SARS) virus from Coronaviridae family. The compound is the biologically active form of the GS 441524 prodrug and being triphosphorylated, it competes with natural nucleoside triphosphates in cells and interferes with viral RNA synthesis. Made to order.
Formule :C12H12N5O13P3·4NaDegré de pureté :(31P-Nmr) Min. 95 Area-%Couleur et forme :White PowderMasse moléculaire :531.20 g/mol
