APIs pour la recherche et les impuretés
Sous-catégories appartenant à la catégorie "APIs pour la recherche et les impuretés"
- Acides Aminés et Dérivés(12.327 produits)
- Anthraquinones et Dérivés(402 produits)
- Dérivés du Benzimidazole et de l’Imidazole(10.416 produits)
- Dérivés des Benzodiazépines(332 produits)
- Glucides et Glycoconjugués(5.050 produits)
- Esters et Dérivés(42.244 produits)
- Acides Gras et Dérivés Lipidiques(32.390 produits)
- Flavonoïdes et Polyphénols(17.078 produits)
- Radicaux Libres et Agents Oxydants/Réducteurs(212 produits)
- Cétones et Dérivés(2.398 produits)
- Antibiotiques Naturels et Semi-Synthétiques(6.351 produits)
- Nitriles et Dérivés Cyano(3.068 produits)
- Nitrosamines et Dérivés(55 produits)
- Nucléosides et Nucléotides(3.462 produits)
- Phosphates et Phosphonates Organiques(1.198 produits)
- Sulfonates et Sulfates Organiques(10.425 produits)
- Composés Organométalliques(4.419 produits)
- Autres(6.284 produits)
- Peptides et Protéines(3.140 produits)
- Polymères et Dérivés(99 produits)
- Dérivés des Purines et Pyrimidines(8.920 produits)
- Dérivés de Quinazoline et de Quinoléine(65.834 produits)
- Quinones et Dérivés(24.349 produits)
- Sels et Dérivés d’API(80.917 produits)
- Stéroïdes et Dérivés(4.939 produits)
- Sulfamides et Dérivés(2.580 produits)
- Terpénoïdes et Dérivés(3.842 produits)
- Thiazolidinediones et Thiopyranes(2.753 produits)
- Composés β-Adrénergiques(229 produits)
58257 produits trouvés pour "APIs pour la recherche et les impuretés"
Olsalazine sodium EP impurity F
Olsalazine sodium EP impurity F
CAS No.:
Natural: Yes
API Impurity: Yes
Custom Synthesis: Yes
Impurity Standard: Yes
Synthetic: Yes
Drug Development: Yes
Research and Development: Yes
Niche Product: Yes
HPLC Standard: Yes
High Purity Product: Yes
Pharmacopoeia Product: NoFormule :C21H14N2O9Degré de pureté :Min. 95%Masse moléculaire :438.34 g/molAbt-639 hydrochloride
CAS :Abt-639 hydrochloride is a drug product that is used as a research and development standard. It is a synthetic drug that has not been approved for any therapeutic use. Abt-639 hydrochloride is metabolized to yield an active metabolite, which has been identified in animal studies. The drug product contains an impurity standard of the natural metabolite, which can be used for pharmacopoeia and analytical purposes.
Formule :C20H21Cl2F2N3O3SDegré de pureté :Min. 95%Masse moléculaire :492.4 g/mol[1-Hydroxy-3-(methylisopentylamino)propylidene] bisphosphonic acid monosodium (ibandronic acid impurity)
CAS :[1-Hydroxy-3-(methylisopentylamino)propylidene] bisphosphonic acid monosodium (ibandronic acid impurity) is a metabolite of ibandronate, which is used in the treatment of osteoporosis. It is an impurity found in ibandronate drug products and can be detected using HPLC.
Formule :C9H22NNaO7P2Degré de pureté :Min. 95%Masse moléculaire :341.21 g/mol(R)-1-Phenyl-1,2,3,4-tetrahydroisoquinoline
CAS :(R)-1-Phenyl-1,2,3,4-tetrahydroisoquinoline is a chiral molecule with four stereocenters. It is synthesized by the reaction of sulfamic acid and cyclohexene in the presence of p-toluenesulfonic acid. The product formed is then dehydrogenated to produce (R)-1-phenyl-1,2,3,4-tetrahydroisoquinoline. This compound is soluble in organic solvents such as benzene and ethane and can be used as an acceptor for chiral stationary phases.
Formule :C15H15NDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :209.29 g/molRef: 3D-IP46848
Produit arrêté2-(Acetylamino)-4-amino-2,4,6-trideoxy-α-D-galactopyranose
CAS :Please enquire for more information about 2-(Acetylamino)-4-amino-2,4,6-trideoxy-α-D-galactopyranose including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C8H16N2O4Degré de pureté :Min. 95%Masse moléculaire :204.22 g/mol4-(4-Aminophenyl)phthalazin-1(2H)-one
CAS :4-(4-Aminophenyl)phthalazin-1(2H)-one is an antibacterial drug that belongs to the class of amide and minimise. It has a constant, synthetic, and chalcone profile. 4-(4-Aminophenyl)phthalazin-1(2H)-one has been shown to have antiplatelet activity in animals. This drug also inhibits the production of proinflammatory cytokines such as IL-6, IL-8, and TNFα by human monocytes. This drug also has antidiabetic properties and a safety profile similar to other nonsteroidal anti-inflammatory drugs.
Formule :C14H11N3ODegré de pureté :Min. 95%Masse moléculaire :237.26 g/molCiprofibrate-o-β-glucuronide
CAS :Ciprofibrate-o-β-glucuronide is the major metabolite of ciprofibrate in humans. It can be detected in urine by a variety of analytical methods, including magnetic resonance spectroscopy, voltammetry, and microscopy. Ciprofibrate-o-β-glucuronide is an enantiomer of ciprofibrate and has been shown to have an enzymatic hydrolysis rate of 0.07% per hour. This hydrolysis process is catalyzed by cytochrome P450 enzymes. Ciprofibrate-o-β-glucuronide is also found in pharmaceutical formulations and excreted from the body with a half life of 4 hours.
Formule :C19H22Cl2O9Degré de pureté :Min. 95%Masse moléculaire :465.3 g/mol4-Desfluoro-4-[4-(2-oxo-2,3-dihydro-1H-benzimidazol-1-yl)-3,6-dihydropyridin-1(2H)-yl] droperidol
CAS :4-Desfluoro-4-[4-(2-oxo-2,3-dihydro-1H-benzimidazol-1-yl)-3,6-dihydropyridin-1(2H)-yl] droperidol is a research chemical that belongs to the class of drugs. The 4DDRP is an analytical standard for impurities in droperidol and also has been used as an API impurity in HPLC standards. The chemical is also used for drug development and drug product synthesis. 4DDRP has been shown to be metabolized into oxalic acid, benzeneacetic acid, and benzoic acid.
Formule :C34H34N6O3Degré de pureté :Min. 95%Masse moléculaire :574.70 g/molBenz[A]anthracene-7-chloromethane-13C
CAS :Please enquire for more information about Benz[A]anthracene-7-chloromethane-13C including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C19H13ClDegré de pureté :Min. 95%Masse moléculaire :277.7 g/molRisperidone E-oxime impurity
CAS :Risperidone E-oxime impurity is a drug product that has been studied for its metabolism in humans, animals and plants. It is an analytical standard that is used as an impurity in the synthesis of risperidone. Risperidone E-oxime impurity is also a synthetic compound with CAS No. 691007-09-7. It can be used as a pharmacopoeia high purity HPLC standard and as a research and development synthetic compound.
Formule :C23H28F2N4O2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :430.49 g/mol(R)-Pramipexole 2HCl
CAS :Produit contrôléDopamine (D2 and D3) receptor agonist; has anti-parkinsonian effects
Formule :C10H19Cl2N3SDegré de pureté :Min. 95%Masse moléculaire :283.06767Methyl mycophenolate impurity E
CAS :Methyl mycophenolate impurity E is a reactive, propargylamine-containing, monosodium salt with immunosuppressive properties. It is used in the treatment of cancer by inhibiting the production of white blood cells, which are needed to fight infection. Methyl mycophenolate impurity E has shown antitumor activity and can be used for the treatment of some types of cancer. It is metabolized in vivo to methyl mycophenolate and inhibits protein synthesis by alkylating DNA.
Formule :C18H22O6Degré de pureté :Min. 95%Couleur et forme :White PowderMasse moléculaire :334.36 g/mol6-Acetoxymethyl-4-methoxy-5-methyl-3-pyridylmethanol o-toluate
CAS :6-Acetoxymethyl-4-methoxy-5-methyl-3-pyridylmethanol o-toluate is a synthetic compound that is used as an analytical reference standard for the metabolism studies. It has been evaluated in a pharmacopoeia and has been found to be of high purity with no detectable impurities. This product can be used in drug development or research and development.
Formule :C19H21NO5Degré de pureté :Min. 95%Masse moléculaire :343.40 g/molN-Carboxylate-6-hydroxy melatonin ethyl ester
CAS :Please enquire for more information about N-Carboxylate-6-hydroxy melatonin ethyl ester including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C16H20N2O5Degré de pureté :Min. 95%Masse moléculaire :320.34 g/molAlfuzosin hydrochloride EP Impurity F hydrochloride
CAS :Alfuzosin EP Impurity F hydrochloride is a drug product that is used as an analytical standard for Alfuzosin hydrochloride. It is a natural, synthetic, and impurity standard that exhibits similar chromatographic properties to the API. The CAS number of this impurity is 19216-68-3. This product has a niche market because it is used in metabolism studies. It also exhibits high purity and pharmacopoeia grade quality.
Formule :C12H16N4O2•HClDegré de pureté :Min. 95%Masse moléculaire :284.74 g/molN9-Des(4-acetoxy-3-(acetoxymethyl)but-1-yl) N7-[4-acetoxy-3-(acetoxymethyl)but-1-yl] famciclovir
CAS :N9-Des(4-acetoxy-3-(acetoxymethyl)but-1-yl) N7-[4-acetoxy-3-(acetoxymethyl)but-1-yl] famciclovir is an analytical standard that is used for drug development and as an impurity in the production of famciclovir. It has a purity of 99.0% and a melting point of 176°C. The CAS number for this compound is 131266-15-4, and it can be found in the pharmacopoeia under its synonym, acetyl 9'''-desoxyfavipirin. This chemical has been shown to have antiviral activity against herpes simplex virus type 1 (HSV1), but not against HSV2 or cytomegalovirus (CMV).
Formule :C14H19N5O4Degré de pureté :Min. 95%Masse moléculaire :321.33 g/molN-[1-[3-(4-Ethoxyphenyl)-3,4-dihydro-4-oxopyrido[2,3-d]pyrimidin-2-yl]ethyl]-4-fluoro-N-(3-pyridinylmethyl)-3-(trifluoromethyl)-benz eneacetamide
CAS :N-[1-[3-(4-Ethoxyphenyl)-3,4-dihydro-4-oxopyrido[2,3-d]pyrimidin-2-yl]ethyl]-4-fluoro-N-(3-pyridinylmethyl)-3-(trifluoromethyl)-benz eneacetamide is a drug product that is used in the development of new drugs. It is an analytical standard for HPLC and was created as a natural metabolite from the antibiotic Cefazolin. N-[1-[3-(4-Ethoxyphenyl)-3,4-dihydro-4-oxopyrido[2,3-d]pyrimidin-2-yl]ethyl]-4 -fluoro -N-(3 -pyridinylmethyl) - 3 (trifluoromethyl) - benzeneacetic acid has been shown to inhibit
Formule :C32H27F4N5O3Degré de pureté :Min. 95%Masse moléculaire :605.6 g/molCyamemazine sulfoxide
CAS :Cyamemazine sulfoxide is a histamine H1 receptor antagonist. It has been shown to have strong affinity for the serotonin 5-HT2C and dopamine D2 receptors, as well as the atrial 5-HT2A receptors. Cyamemazine sulfoxide has a low oral bioavailability of about 10% and is metabolized in the liver to cyamemazine and its active form, cyamemazine sulfoxide. Cyamemazine sulfoxide binds to serotonin 5-HT2C receptors with a high affinity, which leads to inhibition of serotonin release from nerve endings in the brain. This drug also inhibits dopamine release from nerve endings in the brain and has been shown to have cardiac effects on heart rate and contractility.
Formule :C19H21N3OSDegré de pureté :Min. 95%Masse moléculaire :339.46 g/mol2-Amino-N-(2-benzoyl-4-chlorophenyl)-N-methylacetamide
CAS :2-Amino-N-(2-benzoyl-4-chlorophenyl)-N-methylacetamide is an impurity in the drug product, which is a metabolite of the active drug. It has been classified as a research and development compound and is used as an analytical standard for HPLC. This chemical has been shown to be metabolized in the liver by cytochrome P450 enzymes, generating metabolites that are excreted in urine. 2-Amino-N-(2-benzoyl-4-chlorophenyl)-N-methylacetamide exhibits pharmacological activity similar to other benzodiazepine drugs.
Formule :C16H15ClN2O2Degré de pureté :Min. 95%Masse moléculaire :302.75 g/molCarfilzomib (2R,4S)-diol
CAS :Carfilzomib is a drug product that belongs to the class of drugs called proteasome inhibitors. It has been used in the treatment of multiple myeloma, and is also being studied for use in other diseases such as chronic obstructive pulmonary disease and cystic fibrosis. Carfilzomib is an impurity standard for HPLC analysis and an analytical reference material. It is also used as a pharmacopoeia reference material. Carfilzomib is a natural product, with the synthetic route being developed by researchers at Pfizer. The drug product contains 2R,4S-diol as its main metabolite and impurity.
Formule :C40H59N5O8Degré de pureté :Min. 95%Masse moléculaire :737.90 g/molLinezolid N-oxide
CAS :Please enquire for more information about Linezolid N-oxide including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C16H20FN3O5Degré de pureté :Min. 95%Masse moléculaire :353.35 g/molPropoxyphenyl homohydroxysildenafil
CAS :Propoxyphenyl homohydroxysildenafil is a preparative mass spectrometric analysis of the metabolite of sildenafil, which is a phosphodiesterase type 5 inhibitor. It has been shown to increase the flow rate in rats with an experimental pulmonary hypertension. The product ions of propoxyphenyl homohydroxysildenafil are m/z 409.3, 417.2, and 419.2, and its pharmacological study has been conducted on tadalafil and isobutyl.Formule :C24H34N6O5SDegré de pureté :Min. 95%Masse moléculaire :518.6 g/molLeuprolide acetate ep impurity F
CAS :Leuprolide acetate ep impurity F is a drug product that is an impurity standard for the leuprolide acetate API. It is used in analytical and clinical studies to identify the presence of leuprolide acetate impurities, as well as to determine the metabolism of leuprolide acetate. Leuprolide acetate ep impurity F has been shown to be a natural metabolite of leuprolide acetate and have a niche application in pharmacopoeia.
Formule :C61H85F3N16O14Degré de pureté :Min. 95%Masse moléculaire :1,323.4 g/molOmeprazole Impurity 65
Impurity 65 is an impurity of Omeprazole, a drug used to treat gastroesophageal reflux disease and peptic ulcer. Impurity 65 is a metabolite of Omeprazole that can be found in the drug product at a concentration up to 0.5%. It has been shown to have anti-inflammatory effects and can be used as a research and development standard for HPLC analysis. Impurity 65 is also used as an impurity standard in the USP pharmacopoeia and other pharmacopoeias around the world.
Formule :C17H17N3O4Degré de pureté :Min. 95%Masse moléculaire :327.33 g/molcis-Tadalafil
CAS :Cis-Tadalafil is a potent inhibitor of phosphodiesterase 5, which is used to treat erectile dysfunction (ED) and primary pulmonary hypertension (PPH). It works by increasing blood flow to the penis, allowing men with ED to achieve and maintain an erection. Cis-Tadalafil is also used to treat symptoms of prostatic hyperplasia (enlarged prostate) in men. This drug has been shown to be effective in treating PPH by reducing pulmonary arterial pressure and improving exercise capacity. Cis-Tadalafil belongs to the carboline class of drugs and is a phosphodiesterase 5 inhibitor that selectively inhibits cGMP-specific phosphodiesterase type 5 (PDE5). This drug has been shown to be highly effective in treating both ED and PPH with minimal side effects.
Formule :C22H19N3O4Degré de pureté :Min. 95%Couleur et forme :White/Off-White SolidMasse moléculaire :389.4 g/molRef: 3D-FT27987
Produit arrêtéEmpagliflozin S-furanose
CAS :Empagliflozin S-furanose is a Custom synthesis drug product. It is an analytical standard with CAS No. 1620758-32-8, and it is used in research and development of new drugs. Empagliflozin S-furanose has been found to be a metabolite of empagliflozin, a drug that is used to treat type 2 diabetes mellitus. It is also used as an impurity standard for HPLC analysis of empagliflozin because it does not have any biological activity.
Formule :C23H27ClO7Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :450.91 g/mol2-(2-Amino-5-bromobenzoyl)pyridine
CAS :2-(2-Amino-5-bromobenzoyl)pyridine (2ABBP) is a chemical compound with the molecular formula C10H7BrN3. It is a glucuronide conjugate of 2-amino-5-bromobenzoic acid and has been used as an immunological reagent in the form of a monoclonal antibody. 2ABBP binds to dryopteris, which is a plant species that contains polyphenols called pteridines. 2ABBP has been shown to have anti-inflammatory properties in rat liver microsomes and cell culture experiments. The mechanism of action may involve inhibition of cyclooxygenase enzymes, which are involved in prostaglandin synthesis. 2ABBP also binds to human serum albumin and chaperones, proteins that bind other proteins or small molecules. The biological activity of 2ABBP may be due to its ability to form coval
Formule :C12H9BrN2ODegré de pureté :Min. 95%Masse moléculaire :277.12 g/molRef: 3D-IA17613
Produit arrêté(3S,4R)-Tofacitinib
CAS :(3S,4R)-Tofacitinib is a rhombic and paramagnetic compound with a Curie point of approximately 10.6°C. It is soluble in nonpolar solvents such as benzene and toluene. (3S,4R)-Tofacitinib has been shown to have magnetic properties that are dependent on the temperature and the frequency of the applied magnetic field. The paramagnetic resonance spectra were observed at 18°C and 32°C, while the paramagnetic resonance spectrum was observed at -2°C. The octahedral interactions are likely due to the presence of six different types of iron ions in the crystal structure.
Formule :C16H20N6ODegré de pureté :Min. 95%Masse moléculaire :312.37 g/molRef: 3D-STB57848
Produit arrêtéPramipexole EP Impurity C
CAS :Pramipexole EP Impurity C is a synthetic impurity that is used as an impurity standard in the manufacture of Pramipexole EP. It is also used as a research and development tool for drug product, custom synthesis, CAS No. 1973461-14-1, and analytical studies. This compound has been shown to be a metabolite of Pramipexole EP and may have pharmacological properties. Pramipexole EP Impurity C has been found to inhibit the growth of certain bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA) isolates.
Formule :C20H32N6S2Degré de pureté :Min. 95%Ref: 3D-FP165425
Produit arrêtéAcarbose Impurity E
CAS :Acarbose Impurity E is an impurity found in acarbose. It is a natural, API impurity and is a synthetic impurity standard. Acarbose Impurity E has been used in drug development research and development, as well as in the HPLC analysis of acarbose to generate a pharmacopoeia-grade purity standard.
Degré de pureté :Min. 95%N-Hydroxymethyl Sumatriptan
CAS :N-Hydroxymethyl Sumatriptan is an analytical standard and a research and development impurity. It is also used as an API impurity in drug product manufacturing. N-Hydroxymethyl Sumatriptan can be synthesized by reacting the parent drug with hydroxyl radicals, which is a process that yields no side products. N-Hydroxymethyl Sumatriptan can be found in the following pharmacopoeia: United States Pharmacopoeia (USP) 11>, European Pharmacopoeia (EP), Japanese Pharmacopoeia (JP)13>, British Pharmacopoeia (BP), and Chinese Pharmacopiae (CPC).
Formule :C15H23N3O3SDegré de pureté :Min. 95%Masse moléculaire :325.43 g/molN-Desacetyl thiocolchicoside
CAS :N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.
Formule :C25H31NO9SDegré de pureté :Min. 95%Masse moléculaire :521.58 g/molN-Nitroso dorzolamide
N-Nitroso dorzolamide is a chemical compound used as an intermediate in the synthesis of dorzolamide, a carbonic anhydrase inhibitor used in the treatment of glaucoma and ocular hypertension.
Formule :C10H15N3O5S3Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :353.44 g/molPiperacilloic acid
CAS :Piperacilloic acid is a synthetic compound that exhibits antibacterial activity. It has been shown to be effective against human pathogens, including urothelial carcinoma and human serum. Piperacilloic acid binds to the amino acids lysine and arginine in bacterial proteins and inhibits protein synthesis by inhibiting the function of enzymes that require these amino acids for their activity. The potency of piperacillin is low, but it is activated by hydrolysis in the acidic environment of the stomach or intestinal tract. Piperacilloic acid also has potential as a contraceptive agent because it may inhibit transcriptional regulation of genes that are involved in sperm production.
Formule :C23H29N5O8SDegré de pureté :(Elemental Analysis) Min. 90 Area-%Couleur et forme :PowderMasse moléculaire :535.57 g/molRef: 3D-FP27061
Produit arrêtéDicyclopropylamine hydrochloride
CAS :Dicyclopropylamine hydrochloride is a tyrosine kinase inhibitor that blocks the activity of jak2. It is an innovative molecule with the potential to be used in cancer treatment. Dicyclopropylamine hydrochloride has been shown to inhibit activation of tyrosine kinases, which are involved in cell signaling and proliferation. Dicyclopropylamine hydrochloride also has anti-inflammatory properties, which may be due to its ability to inhibit prostaglandin synthesis. This drug is not expected to have any toxicity or side effects because it can be easily metabolized by the liver.br>br> Dicyclopropylamine hydrochloride is a white solid with a melting point of 175°C. It has no detectable odor, and it is soluble in water and ethanol. The impurities found in this compound include myristic acid and amines, which can cause inflammatory diseases.br>br> D
Formule :C6H11N•HClDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :133.62 g/mol(4-Chlorophenyl)diphenylmethanol
CAS :Please enquire for more information about (4-Chlorophenyl)diphenylmethanol including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C19H15ClODegré de pureté :Min. 95%Masse moléculaire :294.8 g/molOxacyclohexane open ring tacrolimus
CAS :Please enquire for more information about Oxacyclohexane open ring tacrolimus including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C44H71NO13Degré de pureté :Min. 95%Masse moléculaire :822.04 g/mol3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride
CAS :3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride is a versatile compound with various characteristics and applications. It has been found to have diverse effects on different biological processes. This compound has shown potential as an antimuscarinic agent, which means it can block the action of acetylcholine at muscarinic receptors in the body.
Formule :C19H25ClN2O2Degré de pureté :Min. 95%Masse moléculaire :348.9 g/molDesfluoro ezetimibe
CAS :Desfluoro ezetimibe is a synthetic cholesterol-lowering drug that inhibits intestinal cholesterol absorption. It is chemically synthesized, and the process includes the introduction of fluorine at the 3-position of the C-ring. Desfluoro ezetimibe is not metabolized in humans, but it may be subject to oxidative degradation. The product is also subject to oxidation by light and air, which may result in formation of impurities. The drug substance has been validated as well as its isomers and efficiencies in mass spectrometry detection.
Formule :C24H22FNO3Degré de pureté :Min. 95%Couleur et forme :White To Off-White SolidMasse moléculaire :391.43 g/molRef: 3D-FD21193
Produit arrêté(S)-Rabeprazole sodium
CAS :(S)-Rabeprazole sodium is an anticancer drug that acts as a kinase inhibitor. It is an analog of Rabeprazole and has been shown to inhibit the growth of cancer cells in vitro and in vivo. (S)-Rabeprazole sodium inhibits the activity of kinases, which are enzymes that play a key role in cell signaling pathways. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. (S)-Rabeprazole sodium has been tested against various types of cancer, including Chinese hamster ovary cells and tumor xenografts in mice. It has also been shown to inhibit elastin degradation, which is important for preventing metastasis of cancer cells. (S)-Rabeprazole sodium may be a promising candidate for the development of new anticancer drugs that target specific kinases and proteins involved in cancer cell growth and survival.
Formule :C18H21N3O3S•NaDegré de pureté :Min. 95%Masse moléculaire :382.43 g/molTerbinafine dihydrochloride
CAS :Terbinafine is a drug used in the treatment of onychomycosis, tinea versicolor and dandruff. It belongs to the group of medicines known as antifungals and inhibits the growth of fungi by inhibiting their ability to make proteins. Terbinafine dihydrochloride is a form of terbinafine that is more soluble in water than terbinafine hydrochloride and can be used as a lubricant. Terbinafine hydrochloride is an industrial product that is used as a disintegrant in tablets and capsules.
Formule :C36H40N2Degré de pureté :Min. 95%Masse moléculaire :500.7 g/molSimvastatin acid
CAS :Simvastatin acid is the active form of simvastatin, a drug used to lower blood cholesterol levels. Simvastatin acid inhibits HMG-CoA reductase, the enzyme that converts HMG-CoA to mevalonate. This conversion is a rate-limiting step in the synthesis of cholesterol and other lipids. Simvastatin acid binds to polymerase chain and drug transporter proteins, which leads to cell lysis. The concentration–time curve for simvastatin acid is linear and the half-life is approximately 12 hours. When simvastatin acid is administered with drugs that are potent inducers of CYP3A4 or UGT1A1 enzymes, there may be an increased risk for drug interactions. Simvastatin acid has shown no significant human pharmacokinetic interactions with food or grapefruit juice at doses up to 200 mg/day. There are limited data on the pharmacokinetics of simvastatin
Formule :C25H40O6Degré de pureté :Min. 95%Couleur et forme :White PowderMasse moléculaire :436.58 g/molCiprofloxacin ep impurity C
CAS :Ciprofloxacin ep impurity C is a synthetic compound. It is used as a research and development standard in the synthesis of ciprofloxacin. The purity of this compound is high, and it has been tested for metabolism studies. This impurity can be detected by HPLC using an analytical method with a natural reference substance. This impurity has not been evaluated for pharmacopoeia or CAS number.
Formule :C15H16FN3O3Degré de pureté :Min. 95%Masse moléculaire :305.30 g/molLinagliptin impurity G
CAS :Linagliptin impurity G is an impurity in the drug product Linagliptin. It is a natural substance and its CAS number is 668270-11-9. Impurity G can be synthesized from L-phenylalanine and cyclohexane carboxaldehyde in a two step process. The first step involves the reaction of L-phenylalanine with cyclohexane carboxaldehyde to yield methylcyclohexanecarboxylate, which then undergoes hydrolysis to give phenylcyclohexanol. In the second step, phenylcyclohexanol reacts with hydrochloric acid to produce phenylcyclohexanone, which is then oxidized with hydrogen peroxide to yield impurity G. Impurity G can also be found in the pharmacopoeia as a high purity HPLC standard for linagliptin.
Formule :C25H28N8O2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :472.54 g/molRef: 3D-FA146003
Produit arrêtéTofacitinib dihydro impurity
CAS :Tofacitinib dihydro impurity is a research and development impurity standard for the synthesis of Tofacitinib. It is a custom synthesis with high purity, pharmacopoeia grade, and synthetic. This product is also used in drug development for metabolism studies and analytical applications.
Formule :C16H22N6ODegré de pureté :Min. 95%Masse moléculaire :314.39 g/molRef: 3D-QQC97235
Produit arrêtéN-Benzyl albuterol
CAS :N-Benzyl albuterol is a drug product that is custom synthesized to be of high purity with an analytical standard. It is used in research and development, pharmaceutical development, and as a pharmacopoeia or analytical standard. N-Benzyl albuterol has been found to be a metabolite of the drug product Albuterol Sulfate. It is also used in metabolism studies and natural product research. The CAS number for this compound is 24085-03-8.
Formule :C20H27NO3Degré de pureté :Min. 95%Masse moléculaire :329.4 g/molSacubitril Impurity 2
CAS :Sacubitril Impurity 2 is a drug product that is an analytical impurity in Sacubitril. This impurity can be found in Sacubitril as a result of natural processes or as an API impurity during the synthesis process. Sacubitril Impurity 2 has been shown to have activity in Metabolism studies, Natural, and Custom synthesis. It has been shown to be a Synthetic impurity standard and HPLC standard. Sacubitril Impurity 2 is used for research and development purposes for the drug development industry, specifically for the niche market. It is also used as an analytical standard for pharmacopoeia methods.
Formule :C24H27NO4Degré de pureté :Min. 95%Masse moléculaire :393.48 g/molRef: 3D-IS181152
Produit arrêtéRoflumilast Impurity A
CAS :Roflumilast impurity A is a metabolite of roflumilast. It is a drug product that is used as an analytical standard for the determination of roflumilast in HPLC analysis. Roflumilast impurity A is not natural and is synthetic. It has been shown to be a substrate for CYP1A2, CYP2C8, CYP2C9, and CYP3A4 enzymes. Studies have shown that it may be involved in the metabolism of roflumilast through hydroxylation and deamination.
Formule :C16H14Cl2N2O3Degré de pureté :Min. 95%Masse moléculaire :353.2 g/molRef: 3D-IR168438
Produit arrêtéRocuronium Bromide EP Impurity F Bromide
CAS :Rocuronium Bromide EP Impurity F Bromide is an impurity found in Rocuronium Bromide EP. It is a natural component of the drug product, which is a synthetic drug. The metabolite of this impurity is also found in the natural product, although at much lower concentrations. This impurity has been shown to be present as an analytical impurity in the API and custom synthesis process. This impurity standard has been synthesized synthetically for use in drug development and research and development, as well as for use in HPLC standards.Formule :C34H55N2O4·BrDegré de pureté :Min. 95%Masse moléculaire :635.72 g/molRef: 3D-IR178405
Produit arrêtéIvermectin impurity I
CAS :Ivermectin impurity I is an analytical standard that is used for pharmacopoeia and custom synthesis. It is a natural metabolite of the drug Ivermectin, which has been shown to have anti-inflammatory properties in mice. Ivermectin impurity I binds to nicotinic acetylcholine receptors, leading to muscle paralysis and death. This compound is found in high purity for research and development purposes.
Formule :C48H74O14Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :875.09 g/molChlorthalidone impurity E
CAS :Chlorthalidone impurity E is an analytical standard for the HPLC analysis of chlorthalidone in pharmaceutical drug products and is a metabolite of chlorthalidone. Chlorthalidone impurity E is an API impurity that can be found in the synthesis of chlorthalidone, and it has been detected as a minor component in certain drug products. It is important to have an accurate specification for this compound, since it can affect the pharmacological properties of the drug product. The purity level of this compound must be at least 98% or greater to ensure that there are no contaminants present. This compound is also a metabolite of chlorthalidone and is used as a pharmacopoeia reference substance for testing equipment calibration.END>
Formule :C14H11ClN2O3SDegré de pureté :Min. 95%Masse moléculaire :322.77 g/molTriethylene glycol flufenamate
CAS :Etofenamate impurity
Formule :C20H22F3NO5Degré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :413.39 g/molD-6-Cyano-6-norlysergic acid methyl ester
CAS :Please enquire for more information about D-6-Cyano-6-norlysergic acid methyl ester including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C17H15N3O2Degré de pureté :Min. 95%Masse moléculaire :293.32 g/molGS 441524 triphosphate
CAS :Triphosphorylated form of an antiviral nucleoside analog with activity against zoonotic feline infectious peritonitis virus (FIPV) and severe acute respiratory syndrome (SARS) virus from Coronaviridae family. The compound is the biologically active form of the GS 441524 prodrug and being triphosphorylated, it competes with natural nucleoside triphosphates in cells and interferes with viral RNA synthesis. Made to order.
Formule :C12H12N5O13P3·4NaDegré de pureté :(31P-Nmr) Min. 95 Area-%Couleur et forme :White PowderMasse moléculaire :531.20 g/molAtorvastatin calcium trihydrate EP Impurity G
CAS :Atorvastatin is a drug that belongs to the class of statins. It is used for the treatment of high cholesterol levels and other related diseases, such as cardiovascular disease. Atorvastatin calcium trihydrate EP Impurity G is an impurity that may be present in atorvastatin calcium trihydrate. This compound has not been found to have any pharmacological activity.
Formule :C34H37FN2O5Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :572.67 g/molRef: 3D-IA182820
Produit arrêté
