APIs pour la recherche et les impuretés
Sous-catégories appartenant à la catégorie "APIs pour la recherche et les impuretés"
- Acides Aminés et Dérivés(12.348 produits)
- Anthraquinones et Dérivés(405 produits)
- Dérivés du Benzimidazole et de l’Imidazole(10.463 produits)
- Dérivés des Benzodiazépines(335 produits)
- Glucides et Glycoconjugués(5.048 produits)
- Esters et Dérivés(42.305 produits)
- Acides Gras et Dérivés Lipidiques(32.454 produits)
- Flavonoïdes et Polyphénols(17.098 produits)
- Radicaux Libres et Agents Oxydants/Réducteurs(214 produits)
- Cétones et Dérivés(2.402 produits)
- Antibiotiques Naturels et Semi-Synthétiques(6.398 produits)
- Nitriles et Dérivés Cyano(3.070 produits)
- Nitrosamines et Dérivés(55 produits)
- Nucléosides et Nucléotides(3.486 produits)
- Phosphates et Phosphonates Organiques(1.202 produits)
- Sulfonates et Sulfates Organiques(10.447 produits)
- Composés Organométalliques(4.424 produits)
- Autres(6.322 produits)
- Peptides et Protéines(3.151 produits)
- Polymères et Dérivés(100 produits)
- Dérivés des Purines et Pyrimidines(8.957 produits)
- Dérivés de Quinazoline et de Quinoléine(66.131 produits)
- Quinones et Dérivés(24.376 produits)
- Sels et Dérivés d’API(80.360 produits)
- Stéroïdes et Dérivés(4.975 produits)
- Sulfamides et Dérivés(2.606 produits)
- Terpénoïdes et Dérivés(3.858 produits)
- Thiazolidinediones et Thiopyranes(2.755 produits)
- Composés β-Adrénergiques(231 produits)
57677 produits trouvés pour "APIs pour la recherche et les impuretés"
rac-Pregabalin N-acrylamide
CAS :Pregabalin is an anticonvulsant drug that is used to treat epilepsy, neuropathic pain, and generalized anxiety disorder. It binds to the alpha2-delta subunit of voltage-gated calcium channels and regulates neurotransmitter release. Racemic pregabalin N-acrylamide (Rac-Preg) is a racemic mixture of two enantiomers, S(-)Pregabalin and R(+)Pregabalin. It has been shown to be an analytical standard in HPLC analysis by virtue of its purity and stability. Rac-Preg has been demonstrated as a metabolite of racemic pregabalin in humans and rats. Rac-pregabalin N-acrylamide can be synthesized from the corresponding amine using acylation with acrylic acid chloride followed by hydrolysis with sodium methoxide in methanol.
Formule :C11H19NO3Degré de pureté :Min. 95%Masse moléculaire :213.27 g/mol1-Glycoloyl-L-prolinamide
CAS :1-Glycoloyl-L-prolinamide is a drug product that is an analytical standard for the impurity 1-glycoloyl-L-proline (CAS No. 96166-39-1) in the API 1,4,5,6-tetrahydrobenzothiazole (CAS No. 86687-93-0). It has been synthesized to be used as an impurity standard and is provided at a purity of 98.0% or greater by weight. This chemical compound can be used in research and development for the production of drugs as well as in pharmaceutical manufacturing.
Formule :C7H12N2O3Degré de pureté :Min. 95%Masse moléculaire :172.18 g/mol(3R,5S,6E)-7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2-methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5-dihydroxy- 6-heptenoic acid sodium salt
CAS :(3R,5S,6E)-7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2-methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5-dihydroxy- 6-heptenoic acid sodium salt is a synthetic drug product. It is an impurity standard in the synthesis of Metabolism studies. The CAS number is 1714147-50-8 and the chemical name is (3R,5S,6E)-7-[4-(4-fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2 methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5dihydroxyheptenoic acid sodium salt. The molecular weight is 781
Formule :C25H33FN3NaO7SDegré de pureté :Min. 95%Masse moléculaire :561.6 g/mol1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-b enzimidazole
CAS :1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-b enzimidazole is an impurity of a drug product. It is a metabolite that has been shown to be present in human plasma and urine. This compound is synthetically produced and is not found in nature. It has been shown to have niche applications in both analytical chemistry and pharmacopoeia.
Formule :C25H22F6N4O3SDegré de pureté :Min. 95%Masse moléculaire :572.52 g/molo-Acetyl silodosin
CAS :O-Acetyl silodosin is a synthetic, natural metabolite of silodosin. It is a nicotinic acid derivate that inhibits the activity of phosphodiesterase type 5 (PDE5) and has been used as a research and development standard for PDE5 inhibitors. O-Acetyl silodosin is an impurity in the commercial drug product, Silodosin®.
Formule :C27H34F3N3O5Degré de pureté :Min. 95%Masse moléculaire :537.60 g/mol2,2'-(1,4-Piperazinediyl)bis[6,7-dimethoxy-4-quinazolinamine]
CAS :2,2'-(1,4-Piperazinediyl)bis[6,7-dimethoxy-4-quinazolinamine] is a chemical compound that is used as a lead to develop new drugs against malaria. It inhibits the growth of plasmodium falciparum and has been shown to be active in high-throughput screening assays. 2,2'-(1,4-Piperazinediyl)bis[6,7-dimethoxy-4-quinazolinamine] may serve as an active molecule for the treatment of malaria in combination with other antiplasmodial agents. The drug discovery process prioritized this compound because it is an asexual stage inhibitor and has gametocyte inhibitory activities.
Formule :C24H28N8O4Degré de pureté :Min. 95%Masse moléculaire :492.53 g/mol4-Methanesulfonyloxybutanol
CAS :4-Methanesulfonyloxybutanol is a chemical substance with the molecular formula CH3SO2CH(CH2OH)CH2OH. It is used as an intermediate in the synthesis of 4-methanesulfonyloxybutanol, which is a potent inhibitor of busulfan-induced leukopenia and myelosuppression. This substance has been shown to be highly effective in preventing busulfan-induced side effects when administered intravenously. 4-Methanesulfonyloxybutanol is chemically synthesized by intramolecular alkylation of butanol, followed by hydrolysis. The reaction product can be detected using an ionization detector in conjunction with gas chromatography. This product is an alkylation agent that reacts with polypropylene to produce polypropylene glycols.
Formule :C5H12O4SDegré de pureté :Min. 95%Couleur et forme :LiquidMasse moléculaire :168.21 g/molDioctyl carbonate
CAS :Dioctyl carbonate is a pharmaceutical preparation used to treat skin conditions. It is a fatty acid ester of carbonic and carbonyl groups in which the two esters are in the same molecule. Dioctyl carbonate is a reaction product obtained by reacting an inorganic acid, such as hydrochloric acid or sulfuric acid, with an alcohol containing two hydroxyl groups and one double bond. This reaction may be facilitated by heating. The film-forming polymer may be polyvinylpyrrolidone, polyvinyl alcohol, or polyacrylic acid. Dioctyl carbonate has been shown to stimulate colony-stimulating factor production and inhibit the proliferation of human epidermal keratinocytes.
Formule :C17H34O3Degré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :286.4 g/molRef: 3D-BAA68031
Produit arrêtéLinagliptin impurity E
CAS :Produit contrôléLinagliptin impurity E is a metabolite of the drug Linagliptin. It is an analytical reference material that is used to calibrate HPLC and GC-MS methods for quality control and purity assessment of Linagliptin. This impurity standard is also used for metabolism studies.
Formule :C25H28N8O2Degré de pureté :Min. 95%Masse moléculaire :472.54 g/molLy 2389575 hydrochloride
CAS :Ly 2389575 hydrochloride is a drug product for the treatment of rheumatoid arthritis, psoriatic arthritis, and plaque psoriasis. It is synthesized in a natural manner from the fermentation of Streptomyces lavendulae. The compound has been shown to be metabolized through a number of metabolic transformations including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. Ly 2389575 hydrochloride also specifically binds to markers expressed at high levels in Mycobacterium tuberculosis strains (e.g., ESX-1 secretion system protein) and inhibits cell growth in culture.
Formule :C15H16BrCl3N4Degré de pureté :Min. 95%Masse moléculaire :438.6 g/molBinospirone hydrochloride
CAS :Binospirone hydrochloride is a drug product that is used in the treatment of depression. It belongs to the class of antidepressants and has been shown to be effective against major depressive disorder (MDD). Binospirone hydrochloride is metabolized by cytochrome P450 enzymes into two metabolites: 3-hydroxybinospirone and 2,3-dihydroxybinospirone. The natural form of binospirone hydrochloride is synthesized from tyrosine and phenylalanine. It is also found as an impurity in other pharmaceuticals, such as clomipramine, amitriptyline, and fluoxetine. It has been shown that this compound binds to the serotonin transporter (SERT) at high affinity. This binding inhibits the reuptake of serotonin from synapses, leading to increased extracellular concentrations of serotonin.
Formule :C20H27ClN2O4Degré de pureté :Min. 95%Masse moléculaire :394.9 g/molExicorilant
CAS :Exicorilant is an analog of capsaicin, which has been shown to have anticancer properties. It is a potent inhibitor of protein kinases and has been demonstrated to induce apoptosis in human cancer cells. Exicorilant specifically targets tumor cells and inhibits their growth by blocking the activity of certain kinases that are essential for cell division. This anticancer drug has been tested on Chinese hamster ovary cells and found to be effective in inhibiting the growth of various types of cancer cells. In addition, exicorilant has shown promising results in urine samples from patients with advanced cancers, indicating its potential as a diagnostic tool for cancer detection. Overall, exicorilant is a promising inhibitor with potential therapeutic applications for cancer treatment.
Formule :C26H23F4N7O3SDegré de pureté :Min. 95%Masse moléculaire :589.6 g/molN-Trityl candesartan ethyl ester
CAS :N-Trityl candesartan ethyl ester is a drug product that has been custom synthesized for research and development purposes. It is an impurity standard for the synthesis of metoprolol. The compound was synthesized as a synthetic intermediate to be used in an analytical study, and is not found in nature. N-Trityl candesartan ethyl ester is chemically similar to Metoprolol and can be used as an impurity standard for HPLC analysis of Metoprolol or other drugs containing Metoprolol.
Formule :C45H38N6O3Degré de pureté :Min. 95%Masse moléculaire :710.80 g/molWay 629 hydrochloride
CAS :Way 629 hydrochloride is a chemical compound that belongs to the class of synthetic, pharmacopoeia and drug development. It is used as an impurity standard and a custom synthesis. Way 629 hydrochloride is also used in the study of metabolism. This compound has been shown to be metabolized by cytochrome P450 enzymes, glucuronidases, glutathione reductase, or conjugation with glucuronic acid.
Formule :C15H19ClN2Degré de pureté :Min. 95%Masse moléculaire :262.78 g/molOxybutynin impurity C
CAS :Oxybutynin impurity C is a metabolite of the drug product Oxybutynin (CAS No. 1199574-70-3). It is an analytical standard for HPLC, and a natural impurity in the synthesis of Oxybutynin. This is a synthetic compound that has been shown to be metabolized through oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. Oxybutynin impurity C has been used as an analytical reference material for drug development and research and development.
Degré de pureté :Min. 95%DL-threo-Ritalinic acid
CAS :Produit contrôléDL-threo-Ritalinic Acid is a dopamine receptor agonist that has been shown to be effective in treating hyperactivity, or attention deficit disorder (ADHD). It has been found to be more efficacious than dextro-amphetamine, another stimulant drug used for the treatment of ADHD. DL-threo-Ritalinic Acid is believed to work by affecting the neurotransmitters in the brain and altering the balance of dopamine receptors. In a two-way crossover study, preschool children were given either 0.5mg/kg of DL-threo-Ritalinic Acid or placebo for three days. The results showed that this drug was more effective than placebo and significantly improved reaction time. DL-threo-Ritalinic Acid also increased α1 acid glycoprotein levels in plasma, which may account for its effectiveness as an antihypertensive agent.
Formule :C13H17NO2Degré de pureté :Min. 95%Masse moléculaire :219.28 g/mol4-[2-[[(6R,7R)-7-Amino-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]thio]-4-thiazolyl]-1-methyl-pyridinium Chloride Monoh ydrochloride
CAS :4-[2-[[(6R,7R)-7-Amino-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]thio]-4-thiazolyl]-1-methylpyridinium Chloride Monohydrochloride is a drug product under development for the treatment of bacterial infections. 4-[2-[(6R,7R)-7Amino--2carboxy8oxo5thia1azabicyclo[4.2.0]oct2en3yl]thio]-4thiazolyl]-1methylpyridinium Chloride Monohydrochloride is an impurity in the API Methicillin (CAS No. 40082764). Impurities are not necessarily undesirable and may have substantial therapeutic value or provide a desired
Formule :C16H15N4O3S3·Cl·HClDegré de pureté :Min. 95%Masse moléculaire :479.43 g/molEsomeprazole Impurity Q
Esomeprazole Impurity Q is a drug product. It is an impurity standard of esomeprazole, CAS No. 131428-60-1, which is used in the development of drugs and as an analytical reagent. It is synthesized from natural materials and has a purity of 99%. The metabolite can be found in animal and human metabolism studies. Esomeprazole Impurity Q is used for niche purposes such as HPLC standards, analytical reagents, or pharmacopoeia reference substances.
Degré de pureté :Min. 95%Carfilzomib (2R,4S)-diol
CAS :Carfilzomib is a drug product that belongs to the class of drugs called proteasome inhibitors. It has been used in the treatment of multiple myeloma, and is also being studied for use in other diseases such as chronic obstructive pulmonary disease and cystic fibrosis. Carfilzomib is an impurity standard for HPLC analysis and an analytical reference material. It is also used as a pharmacopoeia reference material. Carfilzomib is a natural product, with the synthetic route being developed by researchers at Pfizer. The drug product contains 2R,4S-diol as its main metabolite and impurity.
Formule :C40H59N5O8Degré de pureté :Min. 95%Masse moléculaire :737.90 g/molPreterramide C
CAS :Preterramide C is a drug that belongs to the class of drugs known as aminopyridines. It is a metabolite of preterramide A and has been used as an analytical reference standard for HPLC. This product is available in the form of a pure white crystalline powder with a purity greater than 98%. It has been shown to be an impurity in drug products and can be used as an impurity standard, as well as being synthesized by natural or synthetic means.
Formule :C24H23N3O7Degré de pureté :Min. 95%Masse moléculaire :465.50 g/mol2-[[[3-Methyl-4-(methylthio)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole
CAS :2-[[[3-Methyl-4-(methylthio)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole is a synthetic, nonsteroidal anti-inflammatory drug. It is soluble in methanol and ethanol, not soluble in water. The impurity standard of 2-[[[3-Methyl-4-(methylthio)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole is 3-[2-[(3,4,5-trimethoxyphenyl)amino]-1H-benzimidazolium methyl sulfate].
Formule :C15H15N3OS2Degré de pureté :Min. 95%Masse moléculaire :317.43 g/molN-Formyl leurosine
CAS :N-Formyl leurosine is an inhibitor of fatty acid synthesis. It has been shown to inhibit the growth of solid tumours in mice and rats, but not in dogs. The mechanism by which N-formyl leurosine inhibits tumour growth is unknown. This compound is a formylating agent, which means that it can be used to form an aldehyde group from formaldehyde. This group has been implicated in the antitumour activity of N-formyl leurosine.
Formule :C46H54N4O10Degré de pureté :Min. 95%Masse moléculaire :822.94 g/molrac-1,2,3,4-Tetrahydro-5-methoxy-N-propyl-2-naphthalenamine
CAS :Rac-1,2,3,4-Tetrahydro-5-methoxy-N-propyl-2-naphthalenamine is an organic compound with the molecular formula C10H14N. Racemic rac-1,2,3,4-tetrahydro-5-methoxy-N propyl 2 naphthalenamine has been used in the synthesis of rotigotine. The enantiomers can be separated by means of an electrophoretic method. Racemic rac 1,2 3 4 tetrahydro 5 methoxy n propyl 2 naphthalenamine has a melting point range of 138 to 141 °C and a boiling point range of 285 to 288 °C at atmospheric pressure. This compound is soluble in organic solvents such as chloroform and ethanol and insoluble in water. It has a density of 1.07 g/cm3 at 20 °C and it isFormule :C14H21NODegré de pureté :Min. 95%Masse moléculaire :219.32 g/mol2-(Acetylamino)-4-amino-2,4,6-trideoxy-α-D-galactopyranose
CAS :Please enquire for more information about 2-(Acetylamino)-4-amino-2,4,6-trideoxy-α-D-galactopyranose including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C8H16N2O4Degré de pureté :Min. 95%Masse moléculaire :204.22 g/molAbt-639 hydrochloride
CAS :Abt-639 hydrochloride is a drug product that is used as a research and development standard. It is a synthetic drug that has not been approved for any therapeutic use. Abt-639 hydrochloride is metabolized to yield an active metabolite, which has been identified in animal studies. The drug product contains an impurity standard of the natural metabolite, which can be used for pharmacopoeia and analytical purposes.
Formule :C20H21Cl2F2N3O3SDegré de pureté :Min. 95%Masse moléculaire :492.4 g/molN9-Des(4-acetoxy-3-(acetoxymethyl)but-1-yl) N7-[4-acetoxy-3-(acetoxymethyl)but-1-yl] famciclovir
CAS :N9-Des(4-acetoxy-3-(acetoxymethyl)but-1-yl) N7-[4-acetoxy-3-(acetoxymethyl)but-1-yl] famciclovir is an analytical standard that is used for drug development and as an impurity in the production of famciclovir. It has a purity of 99.0% and a melting point of 176°C. The CAS number for this compound is 131266-15-4, and it can be found in the pharmacopoeia under its synonym, acetyl 9'''-desoxyfavipirin. This chemical has been shown to have antiviral activity against herpes simplex virus type 1 (HSV1), but not against HSV2 or cytomegalovirus (CMV).
Formule :C14H19N5O4Degré de pureté :Min. 95%Masse moléculaire :321.33 g/molPropoxyphenyl thiosildenafil
CAS :Propoxyphenyl thiosildenafil is a linker that has been synthesized from the amino acid sildenafil. The compound can be used in pharmaceutical preparations, health food, and medicinal preparations. It is also used as an additive to prepare the desired drug. This product is a resonance-type organic compound that can be detected using resonance spectroscopy or magnetic resonance spectroscopy. The compound has a molecular weight of 348.08 g/mol and a boiling point of 440°C at 760 mmHg pressure.
Formule :C23H32N6O3S2Degré de pureté :Min. 95%Masse moléculaire :504.7 g/molL-Valine 2-hydroxyethyl ester tosylate
CAS :L-Valine 2-hydroxyethyl ester tosylate (L-V2HT) is a drug product that is synthesized by custom synthesis. It has high purity, analytical, and natural properties. L-V2HT is metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. The active form of L-V2HT is metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. L-V2HT also specifically binds to markers expressed at high levels in Mycobacterium tuberculosis strains (e.g., ESX-1 secretion system protein) and inhibits cell
Formule :C14H23NO6SDegré de pureté :Min. 95%Masse moléculaire :333.4 g/molCp-66713 mesylate
CAS :Cp-66713 mesylate is a synthetic drug product with a molecular formula of C17H19NO2 and a molecular weight of 269.34. It has the following CAS number: 91896-58-1. The purity of this compound is >99% (HPLC).
Formule :C15H10ClN5Degré de pureté :Min. 95%Masse moléculaire :295.72 g/molHydroxy cyclophosphamide semicarbazone-d4
CAS :Hydroxy cyclophosphamide semicarbazone-d4 is an analytical standard used to monitor the purity of a drug product. It can be used as a reference compound to determine the identity of impurities in a drug product. Hydroxy cyclophosphamide semicarbazone-d4 has been found to be an impurity in some drugs, such as dihydroxycyclophosphamide and hydroxyclorambucil. The chemical name for this substance is 4-[bis(2-chloroethyl)amino]benzoic acid hydroxycyclobutyl ester, and it is used in the synthesis of 3-(1-naphthyl)propionic acid semicarbazide and 2-methyl-2-nitropropane sulfonate. Hydroxy cyclophosphamide semicarbazone-d4 is also a metabolite that is formed when hydroxy cyclophosphamide is broken down by the liver or kidney.
Formule :C8H18Cl2N5O3PDegré de pureté :Min. 95%Masse moléculaire :334.14 g/molDexamethasone Impurity A
Impurity A is an impurity of the drug product, dexamethasone. The impurity is a natural metabolite of dexamethasone that is found in the urine of patients taking this medication. Impurity A is chemically identified using HPLC and its purity verified using GC-MS and LC-MS. This impurity can be used as a reference standard for analytical purposes and as an impurity standard for pharmacopoeia testing.
Formule :C22H29FO5Degré de pureté :Min. 95 Area-%Couleur et forme :White Off-White PowderMasse moléculaire :392.46 g/molN-Acetyl N-descarboxyethyl retigabine d4
CAS :N-Acetyl N-descarboxyethyl retigabine (D4) is a pharmaceutical drug that is used for the treatment of epilepsy. It has been shown to be effective in patients who have not responded to other treatments. D4 binds to voltage-gated potassium channels and inhibits their opening, which leads to a decrease in neurotransmitter release from nerve cells. The mechanism by which D4 induces epileptic seizures is unclear but may be due to its ability to inhibit the activity of GABA receptors in the brain.Formule :C15H16FN3ODegré de pureté :Min. 95%Masse moléculaire :273.3 g/molAmoxicillin EP Impurity L
CAS :Amoxicillin EP Impurity L is an impurity standard for amoxicillin. It is a synthetic compound that is used to ensure the quality of amoxicillin drug products. Amoxicillin EP Impurity L has been shown to be metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. This impurity has also been shown to have anti-inflammatory properties and may be due to its inhibition of prostaglandin synthesis.
Formule :C24H29N5O7S2Degré de pureté :Min. 95%Masse moléculaire :563.65 g/mol1-Methoxy-5-(methoxymethoxy)-naphthalene
CAS :Please enquire for more information about 1-Methoxy-5-(methoxymethoxy)-naphthalene including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C13H14O3Degré de pureté :Min. 95%Masse moléculaire :218.25 g/mol9-(1,3-Dioxolan-2-ylmethyl)-3,9-dihydro-1,3-dimethyl-1H-purine-2,6-dione
CAS :9-(1,3-Dioxolan-2-ylmethyl)-3,9-dihydro-1,3-dimethyl-1H-purine-2,6-dione is a metabolite of the drug 9-(1,3-Dioxolan-2-ylmethyl)-1,3,9 dihydrobenzo[g]pteridine. It is an impurity in the synthesis of 9-(1,3 Dioxolan 2 ylmethyl)-3,9 dihydrobenzo [g]pteridine. The purity of this compound is > 99%, with a melting point range of 233 to 235 °C and a molecular weight of 244.24 g/mol. It is soluble in methanol and acetonitrile. This compound has been characterized by IR spectroscopy (ATR), 1H NMR (400 MHz) spectroscopy (CDCl 3 ), and mass spectrometry (HRMS
Formule :C11H14N4O4Degré de pureté :Min. 95%Masse moléculaire :266.25 g/mol(S)-3-((S)-5-Oxopyrrolidine-2-carbonyl)thiazolidine-4-carboxylic acid
CAS :(S)-3-((S)-5-Oxopyrrolidine-2-carbonyl)thiazolidine-4-carboxylic acid is a synthetic compound that is used as an impurity standard for HPLC. It is also used in drug development and research and development of pharmaceuticals. This product was made through custom synthesis and is not natural.
Formule :C9H12N2O4SDegré de pureté :Min. 95%Masse moléculaire :244.27 g/molKaempferol di-o-methoxymethyl ether
CAS :Kaempferol di-O-methoxymethyl ether is a natural product that has been identified as a metabolite of kaempferol. It is an API impurity in the drug product and can also be found in the synthesis of kaempferol. Kaempferol di-O-methoxymethyl ether is a synthetic compound that can be used for drug development, research and development, and analytical purposes. It is an HPLC standard for pharmacopoeia.Formule :C19H18O8Degré de pureté :Min. 95%Masse moléculaire :374.3 g/molM,M-Quaterphenyl
CAS :M,M-Quaterphenyl is a low energy fluorescent molecule that emits light in the near ultraviolet region of the electromagnetic spectrum. It is chemically stable and has a high quantum yield. The structure of M,M-Quaterphenyl consists of a skeleton made up of alternating carbon and chlorine atoms. This molecule can be synthesized from the reaction of biphenyl with hydrochloric acid and sodium carbonate.
Formule :C24H18Degré de pureté :Min. 95%Masse moléculaire :306.4 g/mol3'-[3-(3-Azido-2,3-dideoxy-b-D-erythro-pentofuranosyl)-3,6-dihydro-5-methyl-2,6-dioxo-1(2H)-pyrimidinyl]-3'-deoxy-thymidine
CAS :3'-[3-(3-Azido-2,3-dideoxy-b-D-erythro-pentofuranosyl)-3,6-dihydro-5-methyl-2,6-dioxo-1(2H)-pyrimidinyl]-3'-deoxythymidine is an analytical standard used in the R&D and drug development of 3'-azido derivatives of thymidine. It is a synthetic intermediate that has been shown to be a potent inhibitor of human immunodeficiency virus type 1 (HIV) replication and to inhibit intracellular HIV type 2 (HIV2) production in cultured cells. 3'-[3-(3-Azido-2,3,-dideoxy--b erythro--pentofuranosyl)-3,6--dihydro--5--methyl--2,6--dioxo--1(2H)--pyrimidinyl]-
Formule :C20H25N7O8Degré de pureté :95%NmrMasse moléculaire :491.45 g/molRemdesivir impurity 5
CAS :Remdesivir impurity 5 is a metabolite that is generated in the body following metabolism and excretion of remdesivir. It has been shown to be present in urine, plasma, and cerebrospinal fluid following administration of remdesivir. Remdesivir impurity 5 binds to the active site of HIV reverse transcriptase with a Kd value of 0.5 nM. The chemical name for this compound is (5R)-3-[[3-[(2S,4R)-2-amino-4-(2-methylpropyl)piperidin-1-yl]-1H-indol-6-yl]carbonyl]benzoic acid methyl ester.
Formule :C21H27N2O7PDegré de pureté :Min. 95%Masse moléculaire :450.42 g/molCefazedone Impurity 12
CAS :Cefazedone Impurity 12 is a drug product that has been custom synthesized for research and development purposes. The impurity has been shown to have a high purity level, with a CAS number of 184696-69-3. Cefazedone Impurity 12 is an analytical standard and metabolite of Cefazedone. It is also used as a natural drug development standard, which can be used for pharmacopoeia studies or as a metabolite in niche research. This impurity can be synthesized in the laboratory and can be used as an impurity standard for HPLC.
Formule :C8H8N2O3SDegré de pureté :Min. 95%Masse moléculaire :212.23 g/mol3-(2-Fluorophenyl) ezetimibe
CAS :3-(2-Fluorophenyl) ezetimibe is an impurity of the drug product Ezetimibe. It is a metabolite that has been shown to have analytical and research and development applications. 3-(2-Fluorophenyl) ezetimibe is soluble in organic solvents such as acetone, ethanol, or chloroform and insoluble in water. The impurity standard for 3-(2-Fluorophenyl) ezetimibe conforms to the USP/NF monograph for Ezetimibe Impurities A, B, C, D, E and F. The CAS number for this impurity is 1798008-25-9.
Formule :C24H21F2NO3Degré de pureté :Min. 95%Masse moléculaire :409.40 g/molSacubitril methyl ester
CAS :Sacubitril methyl ester is a drug product that belongs to the group of angiotensin receptor blockers. It is a prodrug that is metabolized in vivo to its active form, sacubitril. Sacubitril methyl ester has been shown to be effective in reducing morbidity and mortality in patients with chronic heart failure.
Formule :C23H27NO5Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :397.47 g/mol1-Phenyl-1,2,3,4-tetrahydro-isoquinoline
CAS :1-Phenyl-1,2,3,4-tetrahydro-isoquinoline is a synthetic compound which has been used as a lead compound for the development of drugs with dopamine β-hydroxylase inhibitory activity. In vitro studies have shown that 1-phenyl-1,2,3,4-tetrahydro-isoquinoline inhibits human serum dopamine β-hydroxylase and can be used to study the possible role of this enzyme in Parkinson's disease. This drug is racemized in the body and has been found to be effective against Parkinson's disease in rats. It is also an enantiomer that has industrial applications for the production of polyurethane foam insulation coatings.
Formule :C15H15NDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :209.29 g/molcis-Tadalafil
CAS :Cis-Tadalafil is a potent inhibitor of phosphodiesterase 5, which is used to treat erectile dysfunction (ED) and primary pulmonary hypertension (PPH). It works by increasing blood flow to the penis, allowing men with ED to achieve and maintain an erection. Cis-Tadalafil is also used to treat symptoms of prostatic hyperplasia (enlarged prostate) in men. This drug has been shown to be effective in treating PPH by reducing pulmonary arterial pressure and improving exercise capacity. Cis-Tadalafil belongs to the carboline class of drugs and is a phosphodiesterase 5 inhibitor that selectively inhibits cGMP-specific phosphodiesterase type 5 (PDE5). This drug has been shown to be highly effective in treating both ED and PPH with minimal side effects.
Formule :C22H19N3O4Degré de pureté :Min. 95%Couleur et forme :White/Off-White SolidMasse moléculaire :389.4 g/molRef: 3D-FT27987
Produit arrêtéCiprofloxacin ep impurity C
CAS :Ciprofloxacin ep impurity C is a synthetic compound. It is used as a research and development standard in the synthesis of ciprofloxacin. The purity of this compound is high, and it has been tested for metabolism studies. This impurity can be detected by HPLC using an analytical method with a natural reference substance. This impurity has not been evaluated for pharmacopoeia or CAS number.
Formule :C15H16FN3O3Degré de pureté :Min. 95%Masse moléculaire :305.30 g/molSacubitril Impurity 2
CAS :Sacubitril Impurity 2 is a drug product that is an analytical impurity in Sacubitril. This impurity can be found in Sacubitril as a result of natural processes or as an API impurity during the synthesis process. Sacubitril Impurity 2 has been shown to have activity in Metabolism studies, Natural, and Custom synthesis. It has been shown to be a Synthetic impurity standard and HPLC standard. Sacubitril Impurity 2 is used for research and development purposes for the drug development industry, specifically for the niche market. It is also used as an analytical standard for pharmacopoeia methods.
Formule :C24H27NO4Degré de pureté :Min. 95%Masse moléculaire :393.48 g/molRef: 3D-IS181152
Produit arrêtéDicyclopropylamine hydrochloride
CAS :Dicyclopropylamine hydrochloride is a tyrosine kinase inhibitor that blocks the activity of jak2. It is an innovative molecule with the potential to be used in cancer treatment. Dicyclopropylamine hydrochloride has been shown to inhibit activation of tyrosine kinases, which are involved in cell signaling and proliferation. Dicyclopropylamine hydrochloride also has anti-inflammatory properties, which may be due to its ability to inhibit prostaglandin synthesis. This drug is not expected to have any toxicity or side effects because it can be easily metabolized by the liver.br>br> Dicyclopropylamine hydrochloride is a white solid with a melting point of 175°C. It has no detectable odor, and it is soluble in water and ethanol. The impurities found in this compound include myristic acid and amines, which can cause inflammatory diseases.br>br> D
Formule :C6H11N•HClDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :133.62 g/molRocuronium Bromide EP Impurity F Bromide
CAS :Rocuronium Bromide EP Impurity F Bromide is an impurity found in Rocuronium Bromide EP. It is a natural component of the drug product, which is a synthetic drug. The metabolite of this impurity is also found in the natural product, although at much lower concentrations. This impurity has been shown to be present as an analytical impurity in the API and custom synthesis process. This impurity standard has been synthesized synthetically for use in drug development and research and development, as well as for use in HPLC standards.Formule :C34H55N2O4·BrDegré de pureté :Min. 95%Masse moléculaire :635.72 g/molRef: 3D-IR178405
Produit arrêtéTofacitinib dihydro impurity
CAS :Tofacitinib dihydro impurity is a research and development impurity standard for the synthesis of Tofacitinib. It is a custom synthesis with high purity, pharmacopoeia grade, and synthetic. This product is also used in drug development for metabolism studies and analytical applications.
Formule :C16H22N6ODegré de pureté :Min. 95%Masse moléculaire :314.39 g/molRef: 3D-QQC97235
Produit arrêtéN-Desacetyl thiocolchicoside
CAS :N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.
Formule :C25H31NO9SDegré de pureté :Min. 95%Masse moléculaire :521.58 g/molEmpagliflozin S-furanose
CAS :Empagliflozin S-furanose is a Custom synthesis drug product. It is an analytical standard with CAS No. 1620758-32-8, and it is used in research and development of new drugs. Empagliflozin S-furanose has been found to be a metabolite of empagliflozin, a drug that is used to treat type 2 diabetes mellitus. It is also used as an impurity standard for HPLC analysis of empagliflozin because it does not have any biological activity.
Formule :C23H27ClO7Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :450.91 g/mol(4-Chlorophenyl)diphenylmethanol
CAS :Please enquire for more information about (4-Chlorophenyl)diphenylmethanol including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C19H15ClODegré de pureté :Min. 95%Masse moléculaire :294.8 g/molN-Nitroso dorzolamide
N-Nitroso dorzolamide is a chemical compound used as an intermediate in the synthesis of dorzolamide, a carbonic anhydrase inhibitor used in the treatment of glaucoma and ocular hypertension.
Formule :C10H15N3O5S3Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :353.44 g/mol2-(2-Amino-5-bromobenzoyl)pyridine
CAS :2-(2-Amino-5-bromobenzoyl)pyridine (2ABBP) is a chemical compound with the molecular formula C10H7BrN3. It is a glucuronide conjugate of 2-amino-5-bromobenzoic acid and has been used as an immunological reagent in the form of a monoclonal antibody. 2ABBP binds to dryopteris, which is a plant species that contains polyphenols called pteridines. 2ABBP has been shown to have anti-inflammatory properties in rat liver microsomes and cell culture experiments. The mechanism of action may involve inhibition of cyclooxygenase enzymes, which are involved in prostaglandin synthesis. 2ABBP also binds to human serum albumin and chaperones, proteins that bind other proteins or small molecules. The biological activity of 2ABBP may be due to its ability to form coval
Formule :C12H9BrN2ODegré de pureté :Min. 95%Masse moléculaire :277.12 g/molRef: 3D-IA17613
Produit arrêtéN-Benzyl albuterol
CAS :N-Benzyl albuterol is a drug product that is custom synthesized to be of high purity with an analytical standard. It is used in research and development, pharmaceutical development, and as a pharmacopoeia or analytical standard. N-Benzyl albuterol has been found to be a metabolite of the drug product Albuterol Sulfate. It is also used in metabolism studies and natural product research. The CAS number for this compound is 24085-03-8.
Formule :C20H27NO3Degré de pureté :Min. 95%Masse moléculaire :329.4 g/molIvermectin impurity I
CAS :Ivermectin impurity I is an analytical standard that is used for pharmacopoeia and custom synthesis. It is a natural metabolite of the drug Ivermectin, which has been shown to have anti-inflammatory properties in mice. Ivermectin impurity I binds to nicotinic acetylcholine receptors, leading to muscle paralysis and death. This compound is found in high purity for research and development purposes.
Formule :C48H74O14Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :875.09 g/molPiperacilloic acid
CAS :Piperacilloic acid is a synthetic compound that exhibits antibacterial activity. It has been shown to be effective against human pathogens, including urothelial carcinoma and human serum. Piperacilloic acid binds to the amino acids lysine and arginine in bacterial proteins and inhibits protein synthesis by inhibiting the function of enzymes that require these amino acids for their activity. The potency of piperacillin is low, but it is activated by hydrolysis in the acidic environment of the stomach or intestinal tract. Piperacilloic acid also has potential as a contraceptive agent because it may inhibit transcriptional regulation of genes that are involved in sperm production.
Formule :C23H29N5O8SDegré de pureté :(Elemental Analysis) Min. 90 Area-%Couleur et forme :PowderMasse moléculaire :535.57 g/molRef: 3D-FP27061
Produit arrêté(3S,4R)-Tofacitinib
CAS :(3S,4R)-Tofacitinib is a rhombic and paramagnetic compound with a Curie point of approximately 10.6°C. It is soluble in nonpolar solvents such as benzene and toluene. (3S,4R)-Tofacitinib has been shown to have magnetic properties that are dependent on the temperature and the frequency of the applied magnetic field. The paramagnetic resonance spectra were observed at 18°C and 32°C, while the paramagnetic resonance spectrum was observed at -2°C. The octahedral interactions are likely due to the presence of six different types of iron ions in the crystal structure.
Formule :C16H20N6ODegré de pureté :Min. 95%Masse moléculaire :312.37 g/molRef: 3D-STB57848
Produit arrêtéRoflumilast Impurity A
CAS :Roflumilast impurity A is a metabolite of roflumilast. It is a drug product that is used as an analytical standard for the determination of roflumilast in HPLC analysis. Roflumilast impurity A is not natural and is synthetic. It has been shown to be a substrate for CYP1A2, CYP2C8, CYP2C9, and CYP3A4 enzymes. Studies have shown that it may be involved in the metabolism of roflumilast through hydroxylation and deamination.
Formule :C16H14Cl2N2O3Degré de pureté :Min. 95%Masse moléculaire :353.2 g/molRef: 3D-IR168438
Produit arrêtéSimvastatin acid
CAS :Simvastatin acid is the active form of simvastatin, a drug used to lower blood cholesterol levels. Simvastatin acid inhibits HMG-CoA reductase, the enzyme that converts HMG-CoA to mevalonate. This conversion is a rate-limiting step in the synthesis of cholesterol and other lipids. Simvastatin acid binds to polymerase chain and drug transporter proteins, which leads to cell lysis. The concentration–time curve for simvastatin acid is linear and the half-life is approximately 12 hours. When simvastatin acid is administered with drugs that are potent inducers of CYP3A4 or UGT1A1 enzymes, there may be an increased risk for drug interactions. Simvastatin acid has shown no significant human pharmacokinetic interactions with food or grapefruit juice at doses up to 200 mg/day. There are limited data on the pharmacokinetics of simvastatin
Formule :C25H40O6Degré de pureté :Min. 95%Couleur et forme :White PowderMasse moléculaire :436.58 g/molTerbinafine dihydrochloride
CAS :Terbinafine is a drug used in the treatment of onychomycosis, tinea versicolor and dandruff. It belongs to the group of medicines known as antifungals and inhibits the growth of fungi by inhibiting their ability to make proteins. Terbinafine dihydrochloride is a form of terbinafine that is more soluble in water than terbinafine hydrochloride and can be used as a lubricant. Terbinafine hydrochloride is an industrial product that is used as a disintegrant in tablets and capsules.
Formule :C36H40N2Degré de pureté :Min. 95%Masse moléculaire :500.7 g/molAcarbose Impurity E
CAS :Acarbose Impurity E is an impurity found in acarbose. It is a natural, API impurity and is a synthetic impurity standard. Acarbose Impurity E has been used in drug development research and development, as well as in the HPLC analysis of acarbose to generate a pharmacopoeia-grade purity standard.
Degré de pureté :Min. 95%N-Hydroxymethyl Sumatriptan
CAS :N-Hydroxymethyl Sumatriptan is an analytical standard and a research and development impurity. It is also used as an API impurity in drug product manufacturing. N-Hydroxymethyl Sumatriptan can be synthesized by reacting the parent drug with hydroxyl radicals, which is a process that yields no side products. N-Hydroxymethyl Sumatriptan can be found in the following pharmacopoeia: United States Pharmacopoeia (USP) 11>, European Pharmacopoeia (EP), Japanese Pharmacopoeia (JP)13>, British Pharmacopoeia (BP), and Chinese Pharmacopiae (CPC).
Formule :C15H23N3O3SDegré de pureté :Min. 95%Masse moléculaire :325.43 g/molLinagliptin impurity G
CAS :Linagliptin impurity G is an impurity in the drug product Linagliptin. It is a natural substance and its CAS number is 668270-11-9. Impurity G can be synthesized from L-phenylalanine and cyclohexane carboxaldehyde in a two step process. The first step involves the reaction of L-phenylalanine with cyclohexane carboxaldehyde to yield methylcyclohexanecarboxylate, which then undergoes hydrolysis to give phenylcyclohexanol. In the second step, phenylcyclohexanol reacts with hydrochloric acid to produce phenylcyclohexanone, which is then oxidized with hydrogen peroxide to yield impurity G. Impurity G can also be found in the pharmacopoeia as a high purity HPLC standard for linagliptin.
Formule :C25H28N8O2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :472.54 g/molRef: 3D-FA146003
Produit arrêté(S)-Rabeprazole sodium
CAS :(S)-Rabeprazole sodium is an anticancer drug that acts as a kinase inhibitor. It is an analog of Rabeprazole and has been shown to inhibit the growth of cancer cells in vitro and in vivo. (S)-Rabeprazole sodium inhibits the activity of kinases, which are enzymes that play a key role in cell signaling pathways. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. (S)-Rabeprazole sodium has been tested against various types of cancer, including Chinese hamster ovary cells and tumor xenografts in mice. It has also been shown to inhibit elastin degradation, which is important for preventing metastasis of cancer cells. (S)-Rabeprazole sodium may be a promising candidate for the development of new anticancer drugs that target specific kinases and proteins involved in cancer cell growth and survival.
Formule :C18H21N3O3S•NaDegré de pureté :Min. 95%Masse moléculaire :382.43 g/molOxacyclohexane open ring tacrolimus
CAS :Please enquire for more information about Oxacyclohexane open ring tacrolimus including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C44H71NO13Degré de pureté :Min. 95%Masse moléculaire :822.04 g/mol3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride
CAS :3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride is a versatile compound with various characteristics and applications. It has been found to have diverse effects on different biological processes. This compound has shown potential as an antimuscarinic agent, which means it can block the action of acetylcholine at muscarinic receptors in the body.
Formule :C19H25ClN2O2Degré de pureté :Min. 95%Masse moléculaire :348.9 g/molPramipexole EP Impurity C
CAS :Pramipexole EP Impurity C is a synthetic impurity that is used as an impurity standard in the manufacture of Pramipexole EP. It is also used as a research and development tool for drug product, custom synthesis, CAS No. 1973461-14-1, and analytical studies. This compound has been shown to be a metabolite of Pramipexole EP and may have pharmacological properties. Pramipexole EP Impurity C has been found to inhibit the growth of certain bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA) isolates.
Formule :C20H32N6S2Degré de pureté :Min. 95%Ref: 3D-FP165425
Produit arrêtéDesfluoro ezetimibe
CAS :Desfluoro ezetimibe is a synthetic cholesterol-lowering drug that inhibits intestinal cholesterol absorption. It is chemically synthesized, and the process includes the introduction of fluorine at the 3-position of the C-ring. Desfluoro ezetimibe is not metabolized in humans, but it may be subject to oxidative degradation. The product is also subject to oxidation by light and air, which may result in formation of impurities. The drug substance has been validated as well as its isomers and efficiencies in mass spectrometry detection.
Formule :C24H22FNO3Degré de pureté :Min. 95%Couleur et forme :White To Off-White SolidMasse moléculaire :391.43 g/molRef: 3D-FD21193
Produit arrêtéD-6-Cyano-6-norlysergic acid methyl ester
CAS :Please enquire for more information about D-6-Cyano-6-norlysergic acid methyl ester including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C17H15N3O2Degré de pureté :Min. 95%Masse moléculaire :293.32 g/molTriethylene glycol flufenamate
CAS :Etofenamate impurity
Formule :C20H22F3NO5Degré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :413.39 g/molChlorthalidone impurity E
CAS :Chlorthalidone impurity E is an analytical standard for the HPLC analysis of chlorthalidone in pharmaceutical drug products and is a metabolite of chlorthalidone. Chlorthalidone impurity E is an API impurity that can be found in the synthesis of chlorthalidone, and it has been detected as a minor component in certain drug products. It is important to have an accurate specification for this compound, since it can affect the pharmacological properties of the drug product. The purity level of this compound must be at least 98% or greater to ensure that there are no contaminants present. This compound is also a metabolite of chlorthalidone and is used as a pharmacopoeia reference substance for testing equipment calibration.END>
Formule :C14H11ClN2O3SDegré de pureté :Min. 95%Masse moléculaire :322.77 g/molGS 441524 triphosphate
CAS :Triphosphorylated form of an antiviral nucleoside analog with activity against zoonotic feline infectious peritonitis virus (FIPV) and severe acute respiratory syndrome (SARS) virus from Coronaviridae family. The compound is the biologically active form of the GS 441524 prodrug and being triphosphorylated, it competes with natural nucleoside triphosphates in cells and interferes with viral RNA synthesis. Made to order.
Formule :C12H12N5O13P3·4NaDegré de pureté :(31P-Nmr) Min. 95 Area-%Couleur et forme :White PowderMasse moléculaire :531.20 g/molAtorvastatin calcium trihydrate EP Impurity G
CAS :Atorvastatin is a drug that belongs to the class of statins. It is used for the treatment of high cholesterol levels and other related diseases, such as cardiovascular disease. Atorvastatin calcium trihydrate EP Impurity G is an impurity that may be present in atorvastatin calcium trihydrate. This compound has not been found to have any pharmacological activity.
Formule :C34H37FN2O5Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :572.67 g/molRef: 3D-IA182820
Produit arrêté
