CAS 1000-50-6

Cloruro di butildimetilsilile

Descrizione:

Cloruro di butildimetilsilile, con il numero CAS 1000-50-6, è un composto organosiliconico caratterizzato dalla presenza di un gruppo butile e due gruppi metile attaccati a un atomo di silicio, insieme a un gruppo funzionale cloruro. È tipicamente un liquido incolore o giallo pallido con un odore distintivo. Questo composto è noto per la sua reattività, in particolare come agente silylante nella sintesi organica, dove viene utilizzato per proteggere i gruppi idrossile in alcoli e fenoli durante varie reazioni chimiche. Cloruro di butildimetilsilile è solubile in solventi organici come il diclorometano e l'etere, ma generalmente è insolubile in acqua a causa della sua natura idrofobica. È importante maneggiare questo composto con cura, poiché può essere corrosivo e può causare irritazione alla pelle e agli occhi. Inoltre, deve essere conservato in un luogo fresco e asciutto, lontano dall'umidità e da sostanze incompatibili per mantenere la sua stabilità ed efficacia nelle applicazioni chimiche.

Formula: C₆H₁₅ClSi

InChI: InChI=1S/C6H15ClSi/c1-4-5-6-8(2,3)7/h4-6H2,1-3H3

InChI key: InChIKey=MXOSTENCGSDMRE-UHFFFAOYSA-N

SMILES: C([Si](C)(C)Cl)CCC

Sinonimi:

• Butychlorodimethylsilane
• Butyl(Chloro)Dimethylsilane
• Butylchlorodimethylsilane
• Butyldimethylchlorosilane
• Butyldimethylsilyl Chloride
• Chlorodimethylbutylsilane
• Dimethyl-n-butylchlorosilane
• Silane, butylchlorodimethyl-
• n-Butylchlorodimethylsilane
• n-Butyldimethylchlorosilane
• n-Butyldimethylsilyl chloride

Butylchlorodimethylsilane

CAS: 1000-50-6

Formula: C₆H₁₅ClSi

Purezza: >97.0%(GC)

Colore e forma: Colorless to Almost colorless clear liquid

Peso molecolare: 150.72

Ref: 3B-B2010

Silane, butylchlorodimethyl-

CAS: 1000-50-6

Formula: C₆H₁₅ClSi

Purezza: 95%

Colore e forma: Liquid

Peso molecolare: 150.7218

Ref: IN-DA00008M

N-Butyldimethylchlorosilane

CAS: 1000-50-6

N-Butyldimethylchlorosilane

Purezza: 97%

Peso molecolare: 150.72g/mol

Ref: 54-OR1014308

n-BUTYLDIMETHYLCHLOROSILANE

CAS: 1000-50-6

Alkyl Silane - Conventional Surface Bonding
Aliphatic, fluorinated aliphatic or substituted aromatic hydrocarbon substituents are the hydrophobic entities which enable silanes to induce surface hydrophobicity. The organic substitution of the silane must be non-polar. The hydrophobic effect of the organic substitution can be related to the free energy of transfer of hydrocarbon molecules from an aqueous phase to a homogeneous hydrocarbon phase. A successful hydrophobic coating must eliminate or mitigate hydrogen bonding and shield polar surfaces from interaction with water by creating a non-polar interphase. Although silane and silicone derived coatings are in general the most hydrophobic, they maintain a high degree of permeability to water vapor. This allows coatings to breathe and reduce deterioration at the coating interface associated with entrapped water. Since ions are not transported through non-polar silane and silicone coatings, they offer protection to composite structures ranging from pigmented coatings to rebar reinforced concrete. A selection guide for hydrophobic silanes can be found on pages 22-31 of the Hydrophobicity, Hydrophilicity and Silane Surface Modification brochure.
n-Butyldimethylchlorosilane; Butylchlorodimethylsilane; Butyldimethylsilyl chloride; Chlorodimethyl-n-butylsilane
Forms bonded phases for HPLC

Formula: C₆H₁₅ClSi

Purezza: 97%

Colore e forma: Liquid

Peso molecolare: 150.72

Ref: 3H-SIB1934.0

n-Butyldimethylchlorosilane, 96%

CAS: 1000-50-6

This Thermo Scientific Chemicals brand product was originally part of the Alfa Aesar product portfolio. Some documentation and label information may refer to the legacy brand. The original Alfa Aesar product / item code or SKU reference has not changed as a part of the brand transition to Thermo Scientific Chemicals.

Formula: CH₃(CH₂)₃Si(CH₃)₂Cl

Purezza: 96%

Colore e forma: Clear colorless, Liquid

Peso molecolare: 150.73

Ref: 02-B23551