CAS 25036-25-3

poli(bisfenolo A-co-epicloridrina)

Descrizione:

poli(bisfenolo A-co-epicloridrina), con il numero CAS 25036-25-3, è un polimero sintetico che presenta caratteristiche uniche grazie alla sua struttura copolimerica. Questo materiale si forma attraverso la polimerizzazione di bisfenolo A ed epichlorohydrin, risultando in una resina termoindurente nota per la sua eccellente resistenza chimica, resistenza meccanica e stabilità termica. È spesso utilizzato in applicazioni che richiedono rivestimenti durevoli, adesivi e sigillanti, in particolare in ambienti esposti all'umidità e a vari prodotti chimici. La presenza di bisfenolo A contribuisce alla rigidità e alle proprietà termiche del polimero, mentre il componente epichlorohydrin ne migliora la flessibilità e le capacità adesive. Inoltre, poli(bisfenolo A-co-epicloridrina) può essere modificato per migliorare le sue caratteristiche di prestazione, rendendolo adatto a un'ampia gamma di applicazioni industriali. Tuttavia, è importante considerare le preoccupazioni ambientali e sanitarie associate al bisfenolo A, portando a ricerche in corso su alternative e formulazioni più sicure.

Formula: (C₂₁H₂₄O₄·C₁₅H₁₆O₂)x

InChI: InChI=1S/C21H24O4.C15H16O2/c1-21(2,15-3-7-17(8-4-15)22-11-19-13-24-19)16-5-9-18(10-6-16)23-12-20-14-25-20;1-15(2,11-3-7-13(16)8-4-11)12-5-9-14(17)10-6-12/h3-10,19-20H,11-14H2,1-2H3;3-10,16-17H,1-2H3

InChI key: InChIKey=KHORFZBBHPTCQP-UHFFFAOYSA-N

SMILES: C(C)(C)(C1=CC=C(OCC2CO2)C=C1)C3=CC=C(OCC4CO4)C=C3.C(C)(C)(C1=CC=C(O)C=C1)C2=CC=C(O)C=C2

Sinonimi:

• 2,2-Bis(4-glycidyloxyphenyl)propane-2,2-bis(hydroxyphenyl)propane copolymer
• 4,4′-Isopropylidenediphenol-Rutapox 0162 copolymer
• AER 260-BPA-M copolymer
• Adeka EP 4100-Bisphenol A copolymer
• Araldite GT 6750
• Bisphenol A diglycidyl ether-bisphenol A copolymer
• Bisphenol A diglycidyl ether-bisphenol A-dodecylphenol copolymer
• Bisphenol A-DGEBA copolymer
• Bisphenol A-E 12 copolymer
• Bisphenol A-Epiclon 850S copolymer
• Bisphenol A-Epikote 828EL copolymer
• Bisphenol A-Epikote 828LV copolymer
• Bisphenol A-Epon 829 polymer
• Bisphenol A-JER 828EL copolymer
• Bisphenol A-Rutapox 0162 copolymer
• Bisphenol A-YD 8125 copolymer
• Bisphenol A-bisphenol A diglycidyl ether copolymer
• Bisphenol A-bisphenol A diglycidyl ether polymer
• Bisphenol A-bisphenol A diglycidyl ether-piperidine copolymer
• Cne 00105
• DGEBA-bisphenol A copolymer
• Di(4-hydroxyphenol)isopropylidene diglycidyl ether-di(4-hydroxyphenol)isopropylidene copolymer
• Diaplast D
• Epi-Rez 3515W60
• Epi-Rez 5223
• Epikote 1001F
• Epikote 1002F
• Epikote 1004F
• Epon 1002F
• Epon 1101F
• Epon Resin 1002F
• Epotuf 37-001
• Exa 8067
• Jer 1004F
• Kd 212
• Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-, polymer with 4,4′-(1-methylethylidene)bis[phenol]
• Phenol, 4,4′-(1-methylethylidene)bis-, polymer with 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis[oxirane]
• Phenol, 4,4′-isopropylidenedi-, polymer with 2,2-bis[p-(2,3-epoxypropoxy)phenyl]propane
• Poly(Bisphenol A-co-epichlorohydrin), glycidyl end-capped
• Propane, 2,2-bis[p-(2,3-epoxypropoxy)phenyl]-, polymer with 4,4′-isopropylidenediphenol
• Xu 71909.04
• Xu 71919.03
• diglycidyletherofbisphenola-basedepoxyresins,mediumtohigh
• Poly(Bisphenol A-co-epichlorohydrin), glycidyl end-capped average Mn ~1,750
• polymerofdiglycidyletherofbisphenolaandbisphenola
• POLY(BISPHENOL A-CO-EPICHLOROHYDRIN), GL YCIDYL END-CAPPED, AVE. MN CA. 355
• POLY(BISPHENOL A-CO-EPICHLOROHYDRIN), GL YCIDYL END-CAPPED, AVE. MN CA. 6,100
• Poly(Bisphenol A-co-epichlorohydrin) glycidyl end-capped ISO 9001：2015 REACH
• Phenol,4,4’-(1-methylethylidene)bis-,polymerwith2,2’-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis(oxirane)
• POLY(BISPHENOL A-CO-EPICHLOROHYDRIN), GL YCIDYL END-CAPPED, AVE. MN CA. 348
• Poly(Bisphenol A-co-epichlorohydrin), glycidyl end-capped average Mn ~377
• ADVANCEDBISPHENOLA/EPICHLOROHYDRINEPOXYRESIN
• is(4,1-phenyleneoxymethylene)]bis[oxirane]
• 4,4’-(1-methylethylidene)bisphenol,polymerwith2,2’-[(1-methylethylidene)bis
• Phenol, 4,4-(1-methylethylidene)bis-, polymer with 2,2-(1-methylethylidene)bis(4,1-phenyleneoxymethylene)bisoxirane
• POLY(BISPHENOL A-CO-EPICHLOROHYDRIN), GL YCIDYL END-CAPPED, AVE. MN CA. 4,000
• Bisphenol A-diglycidyl ether copolymer
• POLY(BISPHENOL A-CO-EPICHLOROHYDRIN), GL YCIDYL END-CAPPED, AVE. MN CA. 377
• diglycidyletherofbisphenola(non-specificname)
• BISPHENOLADIGLYCIDYLETHER-BISPHENOLACOPOLYMER
• POLY(BISPHENOL A-CO-EPICHLOROHYDRIN), GL YCIDYL END-CAPPED, AVE. MN CA. 1,075
• bisphenola/epichlorohydrinbasedepoxyresins(non-specificname)
• molecularweightsolids
• Poly(Bisphenol A-co-epichlorohydrin), glycidyl end-capped average Mn ~1,075
• polymerofbisphenolaandepichlorohydrin
• POLY(BISPHENOL A-CO-EPICHLOROHYDRIN), GLYCIDYL END-CAPPED, AVE. MN CA. 480
• TIANFU-CHEM CAS NO.25036-25-3 Poly(Bisphenol A-co-epichlorohydrin) glycidyl end-capped
• mediumtohighmolecularweightsoliddgebpa-basedepoxyresins
• Poly(Bisphenol A-co-epichlorohydrin), glycidyl end-capped average Mn ~355
• POLY(BISPHENOL A-CO-EPICHLOROHYDRIN), GL YCIDYL END-CAPPED, AVE. MN CA. 1,750
• POLY(BISPHENOL A-CO-EPICHLOROHYDRIN), GLYCIDYL END-CAPPED, AVE. MN CA. 374

Bisphenol A-bisphenol A diglycidyl ether copolymer

CAS: 25036-25-3

Formula: C₂₄H₃₅ClO₈

Colore e forma: Solid

Peso molecolare: 486.9829

Ref: IN-DA00BDWV

Poly(Bisphenol A-Co-Epichlorohydrin), Glycidyl End-Capped

CAS: 25036-25-3

Poly(Bisphenol A-Co-Epichlorohydrin), Glycidyl End-Capped

Purezza: average Mn ~377

Peso molecolare: 568.71g/mol

Ref: 54-OR1023509

Poly(Bisphenol A-co-epichlorohydrin) glycidyl end-capped

CAS: 25036-25-3

Poly(Bisphenol A-co-epichlorohydrin) glycidyl end-capped is a thermoplastic polymer that can be used for automotive parts, coatings, and other industrial applications. Poly(BPA-co-EPI) has been shown to have excellent resistance to thermal degradation, good mechanical properties at high temperatures, and good radiation resistance. The polymer is resistant to ethylene and styrene monomer evaporation during processing. Generally, the material can be used as a substitute for polyethylene terephthalate (PET), polyvinyl chloride (PVC), or acrylonitrile butadiene styrene (ABS).

Purezza: Min. 95%

Colore e forma: Clear Viscous Liquid

Peso molecolare: 568.70 g/mol

Ref: 3D-FP40325