Standard fisico-chimici
Gli standard fisicochimici sono materiali di riferimento essenziali utilizzati per garantire la precisione e l'affidabilità di varie misurazioni analitiche nella ricerca scientifica e nelle applicazioni industriali. Questa categoria include una vasta gamma di standard come gli standard di conducibilità, gli standard di elettrochimica e gli standard e reagenti ICP-OES/ICP-MS, che sono cruciali per analisi elementari precise e misurazioni della conducibilità. Le soluzioni tampone di pH e i reagenti per il carbonio organico/inorganico totale sono vitali per mantenere i livelli di pH e misurare il contenuto di carbonio nei campioni. Gli standard della Farmacopea Europea (EP), della Farmacopea degli Stati Uniti (USP) e di altre farmacopee forniscono punti di riferimento per il controllo di qualità farmaceutico. Altri standard come quelli di torbidità, densità, rifrattometria e viscosità assicurano misurazioni precise delle proprietà fisiche. Gli standard specializzati, come quelli per le industrie del vino, lattiero-casearia e petrolchimica, supportano il controllo di qualità e la conformità normativa in settori specifici. Questi standard fisicochimici giocano un ruolo cruciale nel garantire la validità e la riproducibilità dei risultati sperimentali, supportando un'ampia gamma di applicazioni, dalla monitoraggio ambientale ai test farmaceutici e alla scienza dei materiali.
Sottocategorie di "Standard fisico-chimici"
- Standard di colore(74 prodotti)
- Standard di crioscopia(10 prodotti)
- Standard di densità(107 prodotti)
- Standard del punto di fusione(16 prodotti)
- Standard di osmolalità(27 prodotti)
- Standard dell'Indice di Rifrazione(96 prodotti)
- Standard di torbidità(137 prodotti)
- Standard di viscosità(75 prodotti)
Trovati 3970 prodotti di "Standard fisico-chimici"
Ordinare per
Il filtro di purezza non è visibile perché i prodotti attuali non hanno dati di purezza associati per il filtraggio.
Reagecon Methyl Red Indicator 0.05% Solution according to Chinese Pharmacopoeia (ChP)
Reagecon's Methyl Red Indicator 0.05% Solution is a high quality Indicator Solution produced from the highest quality raw materials and manufactured and tested under rigorous conditions. During manual titrations; indicator, titrant or analyte change colour and this colour change is by far the most important method of end point detection, in such titrations. A high quality indicator solution such as Reagecon’s, facilitates end point detection, in a clear and unambiguous manner and is an imperative for accurate manual titrimetry.Colore e forma:LiquidReagecon Deionised Water (25L)
Reagecon’s Deionised Water is a high quality pure water product, presented in a convenient pack size. The product can be used as a matrix for a variety of solutes or as a cleaning/sanitisation solution.Colore e forma:LiquidReagecon Density Standard Quality Range 0.9514 g/mL at 15°C
This Reagecon Density Standard Quality Range 0.9514 g/mL at 15°C is manufactured and tested in accordance with ASTM D4052 for testing of density or relative density (specific and API gravity). It is tested by vibrational densitometer and can be used as a calibration or control standard for density measurement by vibrational or hydrometer (specific gravity) based techniques. - The Test Method used by Reagecon for testing density standards using vibrational densitometers is accredited to ISO 17025 (A2LA Ref: 6739.03). The product is prepared gravimetrically on a weight/weight basis. Both solute and solvent are weighed on a balance calibrated by OIML traceable weights. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The density of the product is established and tested using high performance calibrated vibrational densitometers. - High accuracy ± 0.16%Colore e forma:LiquidReagecon Fluoride 5 ppm Ion Selective Electrode Standard
Reagecon's Fluoride 5 ppm Ion Selective Electrode Standard can be used at suitable concentrations to calibrate or control measurements that use Ion Selective Electrodes (ISE’s) as the sensing technology. - Reagecon’s Ion Selective Electrode (ISE) Standards; diluted to a suitable concentration; are particularly suitable for use as a calibration or control material; using Ion Selective Electrodes as the sensing technology. - Accurate to ± 0.5%. - Aqueous matrix. - Directly traceable to NIST standard reference materials. - Can be used for Method Validation or Instrument Qualification. - Can also be used as a calibrant for other techniques. - Safe; compatible with all types of ISE Electrodes. - Manufactured to exacting specifications with an extended shelf life & stability; even after opening the bottle.Colore e forma:LiquidReagecon Density Standard Premium Range 1.1661 g/mL at 15°C
This Reagecon Density Standard Premium Range 1.1661 g/mL at 15°C is manufactured and tested in accordance with ASTM D1480-12 for testing of density or relative density (specific and API gravity). It is tested by Bingham Pycnometry and can be used as a calibration or control standard for density measurement by pycnometer, vibrational, or hydrometer (specific gravity) based techniques. - The Test Method used by Reagecon for testing density standards using Bingham Pycnometers is accredited to ISO 17025 (A2LA Ref: 6739.03). The product is prepared gravimetrically on a weight/weight basis. Both solute and solvent are weighed on a balance calibrated by OIML traceable weights. Reagecon holds ISO 17025 Accreditation for calibration of laboratory balances (A2LA Ref: 6739.02). The density of the product is established and tested using high performance calibrated reference pycnometers. - High accuracy (± 0.00077 g/ml) - Tested using a fundamental measurement technique (Bingham Pycnometer)Colore e forma:LiquidReagecon Ion Chromatography (IC) Multi Element Anion Standard (7 Elements) in Water (H₂O)
Reagecon’s Multi Element Anion Standard for Ion Chromatography (IC) in H₂O is manufactured from ultra-pure salts. This product is manufactured gravimetrically. Prior to bottling; the final product is tested and verified using a state of the art ion chromatograph and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment; using ultra-pure water (specially treated for the production of ion chromatography standards) and triple leached pre-cleaned bottles. All of the uncertainties of measurement for the product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level. Description | Concentration: - Fluoride (F⁻): 100 µg/mL (ppm). - Nitrite (NO₂): 1000 µg/mL (ppm). - Nitrate (NO₃): 1000 µg/mL (ppm). - Phosphate (PO₄³): 1000 µg/mL (ppm). - Sulphate (SO₄²): 1000 µg/mL (ppm). - Bromide (Br⁻): 1000 µg/mL (ppm). - Chloride (Cl⁻): 1000 µg/mL (ppm).Colore e forma:LiquidReagecon Lead (Pb) 0.1% Standard Solution according to European Pharmacopoeia (EP) Chapter 4 (4.1.2) Limit Test
Reagecon's Lead (Pb) 0.1% Standard Solution is used in the preparation of other reagents and as specified in individual monographs. This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density to a specification of ± 0.2%. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards). The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.Colore e forma:LiquidReagecon Hydrochloric Acid 1.0M (1.0N) Analytical Volumetric Solution (AVL)
Reagecon's Hydrochloric Acid 1.0M (1.0N) Analytical Volumetric Solution (AVL) is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is a fully factorised; high purity; stable product; developed and tested for acid/base titrations. This Analytical Volumetric Solution; also called titrant; standard titrant or standard solution; is tested to a specification of ± 0.1%. It is a reagent of known concentration; that is dispensed from a burette or other dispensing apparatus to a sample (analyte); until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations; or more commonly automatic titrations; to determine the end points by detection of any of several properties. Acid/base titrations; also called neutralisation titrations; are used to determine either the amount of acid/base in a sample or the substance that can be converted to an acid/base. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stoichiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Colore e forma:LiquidReagecon Osmolality Standard 300 mOsm/Kg Urine Based
Reagecon's Osmolality Standard 300 mOsm/kg is tested by our ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). The Osmolality results are reported in milliOsmoles per kilogram water (mOsm/kg H₂O shortened to mOsm/kg for routine use). This product is manufactured in compliance with European; United States and Chinese Pharmacopoeia guidelines where appropriate." - Manufactured in accordance with European and United States Pharmacopoeia guidelines where appropriate. - "These standards are used for calibration; quality control; method validation and instrument calibration irrespective of brand." - Low Uncertainty of Measurement. - Manufactured to exacting specifications with an extended shelf life and stability. - "Consistency of product - Independent; Traceable; Tested."Colore e forma:LiquidReagecon Phosphate Buffer Solution R1 pH 6.80 according to European Pharmacopoeia (EP) Chapter 4 (4.1.3)
Reagecon’s pH 6.8 R1 Buffer Solution is specified for use in individual European Pharmacopoeia (EP) Monographs. It is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03) and NIST traceable; has guaranteed stability throughout its entire shelf life; even after opening the bottle. - NIST traceableColore e forma:LiquidReagecon Simulated Gastric Fluid without Enzyme Dissolution Media in accordance to United States (USP) and European Pharmacopoeias (EP) Concentrate
Reagecon's Simulated Gastric Fluid without Enzyme Dissolution Media Concentrate is presented in concentrate form. This concentrate measures 961.5ml in volume in each bottle and the contents of each bottle can be diluted to produce 25L of working solution in water. This diluted volume is the working Dissolution Medium. The product is prepared and when diluted can be used in accordance with relevant pharmacopoeia requirements. - This product is presented as a concentrate in order to facilitate easy shipping, storage and handling. - The pack contains 6 bottles, each of which has a volume of 961.5ml of solution, each 961.5ml bottle is diluted to give 25L of ready to use Dissolution Medium.Colore e forma:LiquidReagecon Silver Nitrate 0.05M (0.05N) Analytical Volumetric Solution (AVL)
Reagecon's Silver Nitrate 0.05M (0.05N) Analytical Volumetric Solution (AVL) is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is a fully factorised; high purity; stable product; developed and tested for precipitation (argentometric) titrations. This Analytical Volumetric Solution; also called titrant; standard titrant or standard solution; is tested to a specification of ± 0.1%. It is a reagent of known concentration; that is dispensed from a burette or other dispensing apparatus to a sample (analyte); until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations; or more commonly automatic titrations; to determine the end points by detection of any of several properties. Precipitation titrimetry is based on reactions that yield compounds of limited solubility. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stoichiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Colore e forma:LiquidReagecon Methoxyphenylacetic Reagent according to European Pharmacopoeia (EP) Chapter 4 (4.1.1)
Reagecon Methoxyphenylacetic Reagent is a high purity stable product developed and tested for European Pharmacopoeia (EP) applications. These include use in the identification reactions of ions and functional groups (2.3.1) and used as a reagent in the performance of tests outlined in several EP monographs. - This Reagecon EP reagent is accurate, stable and reproducible.Colore e forma:LiquidReagecon Methyl Orange Indicator 0.04% Solution
Reagecon's Methyl Orange Indicator 0.04% Solution is a high quality Indicator Solution produced from the highest quality raw materials and manufactured and tested under rigorous conditions. For manual titrations; indicator titrant or analyte change colour and this colour change is by far the most important method of end point detection, in such titrations. A high quality indicator solution such as Reagecon's Methyl Orange Indicator 0.04% Solution facilitates end point detection, in a clear and unambiguous manner and is an imperative for accurate manual titrimetry.Colore e forma:LiquidReagecon Sodium Hydroxide 1.00N Solution according to United States Pharmacopoeia (USP)
Reagecon's Sodium Hydroxide 1.00N is a fully factorised, high purity, stable product, developed and tested for titrations. This Analytical Volumetric Solution, also called titrant, standard titrant or standard solution, is tested to a specification of ± 0.2%. It is a reagent of known concentration, that is dispensed from a burette or other dispensing apparatus to a sample (analyte), until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations, or more commonly automatic titrations, to determine the end points by detection of any of several properties as detailed in several USP monographs. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stochiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Colore e forma:LiquidReagecon Hydrochloric Acid 0.1M according to European Pharmacopoeia (EP) Chapter 4 (4.2.2)
Reagecon's Hydrochloric Acid 0.1M is a fully factorised, high purity, stable product, developed and tested for titrations. This Analytical Volumetric Solution, also called titrant, standard titrant or standard solution, is tested to a specification of ± 0.2%. It is a reagent of known concentration, that is dispensed from a burette or other dispensing apparatus to a sample (analyte), until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations, or more commonly automatic titrations, to determine the end points by detection of any of several properties as detailed in several EP monographs. - NIST traceable - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stochiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Colore e forma:LiquidReagecon Perchloric Acid 0.1M (0.1N) in Acetic Acid Analytical Volumetric Solution (AVL)
Reagecon's Perchloric Acid 0.1M (0.1N) in Acetic Acid Analytical Volumetric Solution (AVL) is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is a fully factorised; high purity; stable product; developed and tested for acid/base titrations. This Analytical Volumetric Solution; also called titrant; standard titrant or standard solution; is tested to a specification of ± 0.1%. It is a reagent of known concentration; that is dispensed from a burette or other dispensing apparatus to a sample (analyte); until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations; or more commonly automatic titrations; to determine the end points by detection of any of several properties. Acid/base titrations; also called neutralisation titrations; are used to determine either the amount of acid/base in a sample or the substance that can be converted to an acid/base. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stoichiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Colore e forma:LiquidReagecon Gallium Standard for Atomic Absorption (AAS) 10,000 µg/mL (10,000 ppm) in 1M Hydrochloric Acid (HCl)
Reagecon's Gallium Standard for Atomic Absorption (AAS) 10;000 µg/mL in 1M Hydrochloric Acid (HCl) is manufactured from very pure metal or salt (at least 99.9%). This product is manufactured gravimetrically. Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; to a specification of ± 0.2%. The results are reported in mg/L on the basis of weight). Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards). The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.Colore e forma:Liquid
