Standard fisico-chimici
Gli standard fisicochimici sono materiali di riferimento essenziali utilizzati per garantire la precisione e l'affidabilità di varie misurazioni analitiche nella ricerca scientifica e nelle applicazioni industriali. Questa categoria include una vasta gamma di standard come gli standard di conducibilità, gli standard di elettrochimica e gli standard e reagenti ICP-OES/ICP-MS, che sono cruciali per analisi elementari precise e misurazioni della conducibilità. Le soluzioni tampone di pH e i reagenti per il carbonio organico/inorganico totale sono vitali per mantenere i livelli di pH e misurare il contenuto di carbonio nei campioni. Gli standard della Farmacopea Europea (EP), della Farmacopea degli Stati Uniti (USP) e di altre farmacopee forniscono punti di riferimento per il controllo di qualità farmaceutico. Altri standard come quelli di torbidità, densità, rifrattometria e viscosità assicurano misurazioni precise delle proprietà fisiche. Gli standard specializzati, come quelli per le industrie del vino, lattiero-casearia e petrolchimica, supportano il controllo di qualità e la conformità normativa in settori specifici. Questi standard fisicochimici giocano un ruolo cruciale nel garantire la validità e la riproducibilità dei risultati sperimentali, supportando un'ampia gamma di applicazioni, dalla monitoraggio ambientale ai test farmaceutici e alla scienza dei materiali.
Sottocategorie di "Standard fisico-chimici"
- Standard di colore(74 prodotti)
- Standard di crioscopia(10 prodotti)
- Standard di densità(107 prodotti)
- Standard del punto di fusione(16 prodotti)
- Standard di osmolalità(27 prodotti)
- Standard dell'Indice di Rifrazione(96 prodotti)
- Standard di torbidità(137 prodotti)
- Standard di viscosità(75 prodotti)
Trovati 3970 prodotti di "Standard fisico-chimici"
Ordinare per
Il filtro di purezza non è visibile perché i prodotti attuali non hanno dati di purezza associati per il filtraggio.
Reagecon Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether
CAS:This Reagecon Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and Oxygenate compounds in Gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. Description | Concentration: - Ethanol: 11 %. - MTBE: 20 %. - Petroluem Ether: 69 %.Colore e forma:LiquidReagecon Polychlorinated Biphenyl (PCB) Deuterated Internal Standard (2 Compound Mix) in Hexane
This Reagecon PCB Multi Compound Standard is a ready to use product that is used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC; GC-MS; HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. - The identity of each standard is verified using a high performance calibrated Gas Chromatograph Mass Spectrometer (GC-MS Instrument). The mass spectrum of each of the analytes is confirmed by comparison with the National Institute of Standards and Technology (NIST) mass spectral library. Description | Concentration: - PCB77-d6: 10 µg/mL. - PCB156-d3: 10 µg/mL.Colore e forma:LiquidReagecon Pesticide Standard (8 Compound Mix) in Hexane:Acetone
CAS:This Reagecon Pesticide Standard 8 Compound Mix is a ready to use product that is used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC; GC-MS; HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. - The identity of each standard is verified using a high performance calibrated Gas Chromatograph Mass Spectrometer (GC-MS Instrument). The mass spectrum of each of the analytes is confirmed by comparison with the National Institute of Standards and Technology (NIST) mass spectral library. - Ready to use (dilute for use as calibration and/or quality control standards). - Can be used with a variety of instruments including GC; GC-MS; HPLC and LC-MS. - Produced in accordance with EPA methods. - Designed for use in EPA or EU analytical methods. - Ideal for use in EPA 500; 600 and 8000 series methods. - Consistency of product - Independent; Traceable; Tested. Description | Concentration: - 2,4'-DDT: 100 µg/mL. - 4,4'-DDD: 100 µg/mL. - 4,4'-DDE: 100 µg/mL. - 4,4'-DDT: 100 µg/mL. - alpha-BHC: 100 µg/mL. - beta-BHC: 100 µg/mL. - delta-BHC: 100 µg/mL. - lindane: 100 µg/mL.Colore e forma:LiquidReagecon Pesticide Internal Standard (4 Compound Mix) in Methanol, acc Water Test HJ827
This Reagecon Pesticide Internal Standard 4 Compound Mix is a ready to use product that is used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC; GC-MS; HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. - The identity of each standard is verified using a high performance calibrated Gas Chromatograph Mass Spectrometer (GC-MS Instrument). The mass spectrum of each of the analytes is confirmed by comparison with the National Institute of Standards and Technology (NIST) mass spectral library. - Ready to use (dilute for use as calibration and/or quality control standards). - Can be used with a variety of instruments including GC; GC-MS; HPLC and LC-MS. - Produced in accordance with EPA methods. - Designed for use in EPA or EU analytical methods. - Ideal for use in EPA 500; 600 and 8000 series methods. - Consistency of product - Independent; Traceable; Tested. Description | Concentration: - Carbaryl-d7: 20 µg/mL. - Carbofuran-d3: 20 µg/mL. - Methiocarb-d3: 5 µg/mL. - Methomyl-d3: 20 µg/mL.Colore e forma:LiquidReagecon Volatile Organic Compound (VOC) Standard (3 Compound Mix) in Methanol
This Reagecon Volatile Organic Compound (VOC) Standard 3 Compound Mix is a ready to use product that is used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC; GC-MS; HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. - The identity of each standard is verified using a high performance calibrated Gas Chromatograph Mass Spectrometer (GC-MS Instrument). The mass spectrum of each of the analytes is confirmed by comparison with the National Institute of Standards and Technology (NIST) mass spectral library. - Ready to use (dilute for use as calibration and/or quality control standards). - Can be used with a variety of instruments including GC; GC-MS; HPLC and LC-MS. - Produced in accordance with EPA methods. - Designed for use in EPA or EU analytical methods. - Ideal for use in EPA 500; 600 and 8000 series methods. - Consistency of product - Independent; Traceable; Tested. Description | Concentration: - 4-bromofluorobenzene (BFB): 2000 µg/mL. - dibromofluoromethane: 2000 µg/mL. - toluene-d8: 2000 µg/mL.Colore e forma:LiquidReagecon PBDE Multi Compound Standard (8 Compounds) in Hexane:Toluene
CAS:This Reagecon PBDE Multi Compound Standard is a ready to use product that is used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC; GC-MS; HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. - The identity of each standard is verified using a high performance calibrated Gas Chromatograph Mass Spectrometer (GC-MS Instrument). The mass spectrum of each of the analytes is confirmed by comparison with the National Institute of Standards and Technology (NIST) mass spectral library. Description | Concentration: - 2,4,4'-Tribromodiphenyl ether: 20 µg/mL. - 2,2',4,4'-Tetrabromodiphenyl ether: 20 µg/mL. - 2,2',4,4',5-Pentabromodiphenyl ether: 20 µg/mL. - 2,2',4,4',6-Pentabromodiphenyl ether: 20 µg/mL. - 2,2',4,4',5,5'-Hexabromodiphenyl ether: 20 µg/mL. - 2,2',4,4',5,6'-Hexabromodiphenyl ether: 20 µg/mL. - 2,2',3,4,4',5',6-Heptabromodiphenyl ether: 20 µg/mL. - 2,2',3,3',4,4',5,5',6,6'-Decabromodiphenyl ether: 200 µg/mL.Colore e forma:LiquidReagecon Cetane Improver 2-Ethylhexyl Nitrate 0.2% Calibration Standard in Chevron Phillips High Cetane Reference Fuel
This Reagecon Cetane Improver Calibration Standard is a ready to use standard in Petroleum Ether used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for 2-Ethylhexyl Nitrate a known Cetane improver, in Diesel, in accordance with the International Standard ASTM E1655, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS.Colore e forma:LiquidReagecon Volatile Organic Compound (VOC) Single Compound Internal Standard Fluorobenzene 2000 µg/mL in Purge and Trap Methanol
This Reagecon Volatile Organic Compound (VOC) Single Compound Internal Standard is a ready to use product that is used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC; GC-MS; HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. - The identity of each standard is verified using a high performance calibrated Gas Chromatograph Mass Spectrometer (GC-MS Instrument). The mass spectrum of each of the analytes is confirmed by comparison with the National Institute of Standards and Technology (NIST) mass spectral library. - Ready to use (dilute for use as calibration and/or quality control standards). - Can be used with a variety of instruments including GC; GC-MS; HPLC and LC-MS. - Produced in accordance with EPA methods. - Designed for use in EPA or EU analytical methods. - Ideal for use in EPA 500; 600 and 8000 series methods. - Consistency of product - Independent; Traceable; Tested.Colore e forma:LiquidReagecon Gasoline Calibration Standard (4 Compound Mix) in Petroleum Ether
This Reagecon Gasoline Calibration Standard (4 Compound Mix) in Petroleum Ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing Benzene levels in Gasoline in accordance with the International Standard ASTM D6277 and EN 238, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. Description | Concentration: - Benzene: 2.5%. - Toluene: 5.5 %. - Mesitylen: 3 %. - Pr-Benzene: 4.5 %.Colore e forma:LiquidReagecon Polycyclic Aromatic Hydrocarbon (PAH) Standard (5 Compound Mix) in Hexane: Acetone
CAS:This Reagecon Polycyclic Aromatic Hydrocarbon (PAH) Standard 5 Compound Mix is a ready to use product that is used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC, GC-MS, HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. - The identity of each standard is verified using a high performance calibrated Gas Chromatograph Mass Spectrometer (GC-MS Instrument). The mass spectrum of each of the analytes is confirmed by comparison with the National Institute of Standards and Technology (NIST) mass spectral library. - Ready to use (dilute for use as calibration and/or quality control standards). - Can be used with a variety of instruments including GC; GC-MS; HPLC and LC-MS. - Produced in accordance with EPA methods. - Designed for use in EPA or EU analytical methods. - Ideal for use in EPA 500; 600 and 8000 series methods. - Consistency of product - Independent; Traceable; Tested. Description | Concentration: - acenaphthene-d10: 1000 µg/mL. - phenanthrene-d10: 1000 µg/mL. - chrysene-d12: 1000 µg/mL. - perylene-d12: 1000 µg/mL. - naphthalene-d8: 1000 µg/mL.Colore e forma:LiquidReagecon Potassium Phosphate pH 6.8 R Dissolution Media in accordance to United States (USP) and European Pharmacopoeias (EP)
Reagecon's Potassium Phosphate pH 6.8 R Dissolution Media is a ready to use solution, specifically formulated to perform dissolution studies on solid form pharmaceutical preparations. The product is prepared in accordance with relevant Pharmacopoeia requirements, without any deviations in materials or methodology from the Pharmacopoeia methods. - The product has the reported accuracy and guaranteed stability of 2 years.Colore e forma:LiquidReagecon pH 10.00 Buffer Solution at 25°C in Bag-in-Box
Reagecon’s pH Buffer Solution at 25°C is tested by our ISO 17025 Accredited Test Method (A2LA Ref: 6739.03) and NIST traceable.Colore e forma:LiquidReagecon 600 mV Redox Oxidation/Reduction (ORP) Standard at 25°C
This Reagecon's 600 mV (± 5mV) Standard acts as a Control or Reference Material. This is because Redox Oxidation/Reduction (ORP) is an absolute measurement and the sensing electrode does not require calibration. This Standard verifies the functionality of the sensing and reference electrode; the analysts technique; environmental conditions and the operation of the measuring meter. The value of 600 mV quoted refers to the potentials of the platinum electrode v Ag/AgCl reference electrode. - Reagecon produces a complete range of high-quality Redox Standards for the control; validation or qualification of Redox measurement. - Very high specification (± 5mV). - Manufactured to exacting specifications with an extended shelf life and stability; even after opening the bottle. - All products are tested with proven verifiable accuracy and fully budgeted uncertainty of measurement.Colore e forma:LiquidReagecon Bismuth Standard for ICP, ICP-MS 10,000 µg/mL (10,000 ppm) in 2-5% Nitric Acid (HNO₃)
Reagecon's Bismuth Standard for ICP; ICP-MS 10;000 µg/mL (10;000 ppm) in 2-5% Nitric Acid (HNO₃) for ICP or ICP-MS is manufactured from ultra-pure metal (99.999%). This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. To a specification of ± 0.2%. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.Colore e forma:LiquidReagecon 0.5 NTU Ratio Turbidity Standard
Reagecon 0.5 NTU Ratio Turbidity Standard is a suspension of polymer microspheres. The product has guaranteed stability throughout its entire shelf life; even after opening the bottle. - Reagecon’s Turbidity Standards for ratio instruments are composed of suspended polymer microspheres; with well defined spherical shape. - Designed and formulated to overcome the adverse safety; accuracy and stability issues experienced with Formazin Turbidity Standards. - Traceable to NIST standard reference materials. - Manufactured to exacting specifications with an extended shelf life and stability; even after opening the bottle. - US EPA approved for drinking water turbidity. - Non-toxic and non-carcinogenic. - Reagecon also offers a range of Stabilised Formazin Turbidity Standards which are marketed under the Turbiform™ brand See More …Colore e forma:LiquidReagecon Sulphuric Acid 0.5M (1.0N) Analytical Volumetric Solution (AVL) Bag-in-Box
Reagecon's Sulphuric Acid 0.5M (1.0N) Analytical Volumetric Solution (AVL) is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is a fully factorised; high purity; stable product; developed and tested for acid/base titrations. This Analytical Volumetric Solution; also called titrant; standard titrant or standard solution; is tested to a specification of ± 0.1%. It is a reagent of known concentration; that is dispensed from a burette or other dispensing apparatus to a sample (analyte); until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations; or more commonly automatic titrations; to determine the end points by detection of any of several properties. Acid/base titrations; also called neutralisation titrations; are used to determine either the amount of acid/base in a sample or the substance that can be converted to an acid/base. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stoichiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Colore e forma:LiquidReagecon Sodium Hypochlorite Strong Solution according to European Pharmacopoeia (EP) Chapter 4 (4.1.1)
CAS:Reagecon Sodium Hypochlorite Strong Solution is a high purity stable product developed and tested for European Pharmacopoeia (EP) applications. These include use as a reagent in the performance of tests outlined in several EP monographs. - This Reagecon EP reagent is accurate, stable and reproducible. Stability is proven (either opened or unopened) for the shelf life of this product.Colore e forma:LiquidReagecon Density Standard Premium Range 2.0812 g/mL at 20°C
This Reagecon Density Standard Premium Range 2.0812 g/mL at 20°C is manufactured and tested in accordance with ASTM D1480-12 for testing of density or relative density (specific and API gravity). It is tested by Bingham Pycnometry and can be used as a calibration or control standard for density measurement by pycnometer, vibrational, or hydrometer (specific gravity) based techniques. - High accuracy - Tested using a fundamental measurement technique (Bingham Pycnometer)Colore e forma:LiquidReagecon Bromate-Bromide 0.100N according to United States Pharmacopoeia (USP)
Reagecon's Bromate-Bromide 0.100N is a fully factorised, high purity, stable product, developed and tested for titrations. This Analytical Volumetric Solution, also called titrant, standard titrant or standard solution, is tested to a specification of ± 0.2%. It is a reagent of known concentration, that is dispensed from a burette or other dispensing apparatus to a sample (analyte), until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations, or more commonly automatic titrations, to determine the end points by detection of any of several properties as detailed in several USP monographs. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stochiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Colore e forma:LiquidReagecon 0.4 NTU Ratio Turbidity Standard
Reagecon 0.4 NTU Ratio Turbidity Standard is a suspension of polymer microspheres. The product has guaranteed stability throughout its entire shelf life; even after opening the bottle. - Reagecon’s Turbidity Standards for ratio instruments are composed of suspended polymer microspheres; with well defined spherical shape. - Designed and formulated to overcome the adverse safety; accuracy and stability issues experienced with Formazin Turbidity Standards. - Traceable to NIST standard reference materials. - Manufactured to exacting specifications with an extended shelf life and stability; even after opening the bottle. - US EPA approved for drinking water turbidity. - Non-toxic and non-carcinogenic. - Reagecon also offers a range of Stabilised Formazin Turbidity Standards which are marketed under the Turbiform™ brand See More …Colore e forma:Liquid
