CAS 9011-14-7

Poly(methylmethacrylat)

Beschreibung:

Poly(methylmethacrylat) (PMMA), mit der CAS-Nummer 9011-14-7, ist ein synthetisches Polymer, das aus der Polymerisation von Methacrylat-Monomeren gewonnen wird. Es ist ein transparenter Thermoplast, der für seine hervorragende optische Klarheit, UV-Beständigkeit und Wetterbeständigkeit bekannt ist, was es zu einer beliebten Alternative zu Glas in verschiedenen Anwendungen macht. PMMA zeigt eine gute mechanische Festigkeit und Steifigkeit sowie eine geringe Dichte, die zu seinem leichten Charakter beiträgt. Es zeichnet sich auch durch seine einfache Verarbeitung aus, die verschiedene Fertigungstechniken wie Gießen, Extrusion und Spritzguss ermöglicht. PMMA ist gegenüber vielen Chemikalien beständig, kann jedoch anfällig für bestimmte Lösungsmittel und Spannungsrisse sein. Darüber hinaus hat es eine relativ hohe thermische Stabilität, kann jedoch bei erhöhten Temperaturen erweichen. Aufgrund seiner Eigenschaften wird PMMA in Anwendungen eingesetzt, die von Linsen und Bildschirmen bis hin zu medizinischen Geräten und Beschilderungen reichen. Seine Biokompatibilität macht es auch für bestimmte biomedizinische Anwendungen geeignet, einschließlich Zahnprothesen und Implantate.

Formel: C₁₅H₂₄O₆X₂

InChl: InChI=1/C5H7O2/c1-4(2)5(6)7-3/h1H,2-3H3

InChI Key: InChIKey=VVQNEPGJFQJSBK-UHFFFAOYSA-N

SMILES: C(C(C)=C)(OC)=O

Synonyme:

• 01Dh-Le-P
• 1000L
• 100B
• 1H830
• 24120A
• 30D54Ae
• 495A8
• 495Pmmaa2
• 505Nah
• 50N
• 560F
• 821T
• 8589K24
• 8N
• 8N-Df21
• 950K-A6
• 950K-C4
• 950Pmma-C4
• 99524Gt
• Acrivue
• Acron
• Acryfix
• Acrylite
• Acrypet
• Akronil
• Akrylon
• Akurirusande
• Altuglas
• Amatis
• Artecoll
• Arteplast
• Asterite
• Autoflex
• Bestsvetnaya
• Biolon
• Callocryl
• Clarex
• Cranioplast
• Crinothene
• Delaglas
• Dhaf
• Diakon
• Durodent
• GR
• HA
• Hesa-Glas
• Homolite
• Imperplex
• Implast
• Klirit
• LPT
• Lso-M
• Lucite
• MHO
• Metacrill
• Metaplex
• Mgss
• Mhga
• NewPlastic
• Optix
• Orthofil
• Orthognath
• Osteobond
• Palacos
• Perfex
• Perspex
• Piacryl
• Plastik-Kit
• Pmma
• Pmma-A
• Pmmk
• Poly[1-(methoxycarbonyl)-1-methylethylene]
• Polycast
• Polymethylmethacrylate
• Pontalite
• Pvs-H
• Pyroplast
• Rebaron
• Repairsin
• Riston
• SOL
• Sampl-Kwick
• ShieldUP
• Shinkolite
• Spacer-G
• Superacryl
• Technolloy
• Tf-Vh
• Thermocules
• Tosp
• Ultra-quartz
• Umaplex
• Vedril
• Versa-Bond
• Vicalon
• Vivodent
• Methyl Methacrylate Resin (High M.Wt.)
• Methacrylic acid, Me ester, homopolymer
• Methacrylic Acid Methyl Ester, Polymer n=13,500-14,000
• Methacrylic acid methyl ester, polymers
• Methyl methacrylate polymer
• Methyl methacrylate resin
• 2-Propenoic acid, 2-methyl-, methyl ester, homopolymer
• Acryloid
• 2-Propenoic acid, 2-methyl-, methyl ester, homopolymer
• Methyl methacrylate, polymerized
• Poly(methyl methacrylate), beads
• Methyl methacrylate homopolymer
• POLY(METHYL METHACRYLATE) 10'000
• rhoplexb85
• poly(methylmethacrylate), 600 micron
• Paraloid K-120N
• POLY(METHYL METHACRYLATE), AVERAGE MW CA . 15,000 (GPC)
• romacryl
• Polymethyl methacrylate,tooth bracket powder
• kaneacepa20
• acronals320d
• lucite130
• POLY(METHYL METHACRYLATE) STANDARD 20'00 0
• Poly(Methyl Methacrylate) average Mw ~350,000 by GPC
• POLY(METHYL METHACRYLATE) 2'000
• degalans85
• Poly(methyl methacrylate)(PMMA)
• POLY(METHYL METHACRYLATE) 150'000
• Poly(methyl methacrylate), pract.
• POLY(METHYL METHACRYLATE) STANDARD 600
• kallocrylk
• Methyl methacrylate copolymer
• st1
• mh101-2
• delpet80n
• lucite140
• elvacite2041
• PMMACEMENT
• POLY(METHYL METHACRYLATE) 2'480'000
• Poly(methyl methacrylate), Average M.W. 15000 (GPC)
• elvacite6012
• Zimmer DT
• acryloida-15
• POLY(METHYL METHACRYLATE-CO-ETHYL ACRYLATE)
• kallodent222
• POLY(METHYL METHACRYLATE) STANDARD 75'00 0
• Poly(methyl methacrylate),PMMA, Poly(methacrylic acid methyl ester)
• Polymer solid microspheres
• lucite120
• POLY(METHYL METHACRYLATE) STANDARD 24800 00
• lucite147
• PolyMethyl Methacrylate, Powder
• methylmethacrylatehomopolymer
• POLY(METHYL METHACRYLATE) 500'000
• MALDI VALIDATION SET POLY(METHYL METHA-C RYLATE) CERTIFIED
• stellonpink
• POLY(METHYL METHACRYLATE) STANDARD 10'00 0
• Acryloid A-30
• Poly(methyl methacrylate) inherent viscosity ~1.25 dL/g (lit.), crystalline
• a21lv
• Poly(methyl methacrylate) Standard 4'000
• Zimmer LVC
• diakonlo951
• diakonmg
• METHYLPOLYMETHACRYLATE
• acrypetvh
• POLY(METHYL METHACRYLATE), AVERAGE MW CA . 350,000
• POLY(METHYL METHACRYLATE) 75'000
• POLY(METHYL METHACRYLATE) STANDARD 150'0 00
• sol95
• Poly(methyl methacrylate), nominal M.W. 38000
• resarit4000
• korad
• paraplexp543
• parapet60n
• POLY(METHYL METHACRYLATE) 5'000
• METHACRYLIC ACID METHYL ESTER POLYMER
• Poly(Methyl Methacrylate), sec. stand., M.W. 97000, M.N. 44700, fine granules 25GR
• sumipexb-lg
• Poly(methyl methacrylate), approx. M.W. 15000 (GPC)
• elvacite2021
• metaplex4002t
• lucite47
• organicglasse2
• Polymethacrylate: (Lucite)
• sumipexlo
• Poly(Methyl Methacrylate), average Make.W. 15,000 by GPC
• acrysolase
• Poly(methyl methacrylate), beads, average M.W. 35000
• lucite180
• delpet60n
• elvacite
• ao10
• 2-methyl-2-propenoicacidmethylesterhomopolymer
• POLY(METHYL METHACRYLATE) 300'000
• POLY(METHYL METHACRYLATE), AVERAGE M.W. 120,000
• POLY(METHYL METHACRYLATE) 800'000
• disapolm
• 950 MW, polymethylmethacrylate (PMMA) plasticizer free
• POLYBEAD(R) PMMA MICROSPHERES
• PMMA, Poly(methacrylic acid methyl ester), Poly(methyl methacrylate)
• surgicalsimplex
• POLY(METHYL METHACRYLATE) STANDARD 8'000
• Poly(methyl methacrylate), M.W. 93300
• Zimmer Low Viscosity
• POLY(METHYL METHACRYLATE) STANDARD 200'0 00
• torexg
• 50n(polymer)
• delpet50m
• so140
• osteobondsurgicalbonecement
• POLY(METHYL METHACRYLATE) STANDARD 800'0 00
• POLY(METHYL METHACRYLATE) 600
• POLYBEAD(R) POLY(METHYL METHACRYLATE) MICROSPHERES
• tensol7
• st1(polymer)
• poly(methacrylic acid methyl ester)
• POLY(METHYL METHACRYLATE) 20'000
• plexiglas
• POLY(METHYL METHACRYLATE) STANDARD 50'00 0
• sumipex-bmhd
• kallodentclear
• POLY(METHYL METHACRYLATE), AVERAGE MW CA . 996,000 (GPC)
• POLY(METHYL METHACRYLATE), SECONDARY STA NDARD
• POLY(METHYL METHACRYLATE), ISOTACTIC
• paraplexp681
• diakonmg101
• Poly(Methyl Methacryla
• superacrylae
• POLY(METHYL METHACRYLATE) STANDARD 100'0 00
• lso-m4b
• Poly(Methyl Methacrylate) average Mw ~996,000 by GPC, crystalline
• POLYMETHYLMETHACRYLATE(IMPLANTSANDCEMENTS)
• surgicalsimplexp
• cmwbonecement
• Poly(Methyl Methacrylate) average Mw ~15,000 by GPC, powder
• vedril5
• sumipexmho
• Zimmer Bone Cement
• POLY(METHYL METHACRYLATE) STANDARD 500'0 00
• maldi validation set poly(methyl methacrylate) mp 500-70'000 certified according to din
• degalanlp59/03
• Leco Lucite Thermoplastic Powder
• Lucryl
• Polymethyl methacrylate superfine powder
• 2-Propenoicacid,2-methyl-,methylester,homopolymer
• k120n
• so120
• Poly(methyl methacrylate), sec. stand., MW 97.000, M.N. 44.700, fine granules
• metaplexno
• methacrylicacidmethylesterpolymers
• Poly(methylmethacrylate) high mol.wt.
• poly(methyl methacrylate) macromolecule
• so95
• lpt1
• POLY(METHYL METHACRYLATE) STANDARD 2'000
• acrypetv
• elvacite2010
• Poly(Methyl Methacrylate) average Mw ~120,000 by GPC
• plexigumm920
• POLY(METHYL METHACRYLATE) 100'000
• METHYLACRYLICACIDMETHYLESTER
• sumipexlg
• dv400
• POLYMETHYLMETHACRYLATEBONECEMENT
• sumipexb-mh
• Poly(methyl methacrylate), MW ≈ 550,000
• sol90
• plex8572-f
• Poly(methacrylic acid methyl ester) PMMA Methyl methacrylate, polymerized Methyl Methacrylate Polymer Methacrylic Acid Methyl Ester Polymer
• METHYL METHACRYLATE RESIN (LOW M.WT.)
• Methacrylic Acid Methyl Ester Polymer
• elvacite2009
• Acryloid B-44
• POLY(METHYL METHACRYLATE)
• lucite129
• vedril8
• POLYMETHYL METHACRYLATE BEADS
• lucite30
• PMMA, Poly(methacrylic acid methyl ester)
• Poly(methyl Methacrylate)
• poly(Methacrylicacidmethylester),PMMA
• paraglas
• elvacite2008
• acrypetm001
• Zimmer Dough Type
• POLY(METHYL METHACRYLATE) 8'000
• elvacite6011
• akuripettovh
• superacrylo
• POLY(METHYL METHACRYLATE) 50'000
• Poly(Methyl Methacrylate), beads, average M.W. 35,000 25GR

Poly(methyl methacrylate)

CAS: 9011-14-7

Poly(methyl methacrylate)

Reinheit: Heat resistant injection stage

Ref: IN-DG01352223

Methyl Methacrylate Polymer

CAS: 9011-14-7

Formel: C₅H₈O₂n

Farbe und Form: White powder to crystal

Ref: 3B-M0088

Poly(methyl methacrylate)

CAS: 9011-14-7

Poly(methyl methacrylate) is used in the lenses of exterior lights of automobile and automotive components such as badges, steering wheel, tachometer covers, warning triangles and fascia panels. It is in the form of sheets used in shatter resistant panels for building windows, skylights, bullet pro

Formel: (C₅H₈O₂)n

Farbe und Form: crystalline powder, White

Ref: 02-043982

Poly(methyl methacrylate), 600 micron

CAS: 9011-14-7

Poly(methyl methacrylate), 600 microns is used in many medical and biochemical applications. It is suitable for 2D and 3D particle assemblies and for investigations in the colloidal crystal field due to the high monodispersity. It is also used in the field of one- and two-component toners for copyi

Formel: (C₅H₈O₂)n

Farbe und Form: White, granular or spherical powder

Ref: 02-043969

Poly(methyl methacrylate)

CAS: 9011-14-7

Formel: C₇H₁₄O₂

Reinheit: 92%

Farbe und Form: Solid

Molekulargewicht: 130.1849

Ref: IN-DA00GR8D

Poly(methyl Methacrylate)

CAS: 9011-14-7

Poly(methyl Methacrylate)

Formel: CH₂C(CH₃)(CO₂CH₃)n

Reinheit: average Mw ~350,000 by GPC

Farbe und Form: Solid

Ref: 54-OR1014724

Poly(methyl Methacrylate)

CAS: 9011-14-7

Poly(methyl Methacrylate)

Formel: CH₂C(CH₃)(CO₂CH₃)n

Reinheit: Transmittance 92%

Ref: 54-OR1014725

Poly(methyl Methacrylate)

CAS: 9011-14-7

Poly(methyl Methacrylate)

Formel: CH₂C(CH₃)(CO₂CH₃)n

Reinheit: 1000 mesh

Ref: 54-OR1014723

Poly(methyl Methacrylate)

CAS: 9011-14-7

Poly(methyl Methacrylate)

Formel: CH₂C(CH₃)(CO₂CH₃)n

Reinheit: average Mw ~15,000 by GPC, powder

Farbe und Form: Solid

Ref: 54-OR1014722

Poly(methylmethacrylate)

CAS: 9011-14-7

Formel: CH₂C(CH₃)(CO₂CH₃)n

Farbe und Form: White pellets

Ref: 7W-GK6600

Poly(methyl Methacrylate)

Kontrolliertes Produkt

CAS: 9011-14-7

Applications Poly(methyl methacrylate) is used in production of Carbonate-olefin based copolymer for molded plastics.
References Suga, K., et al.: Jpn. Kokai Tokkyo Koho., (2020);

Formel: C₁₅H₂₄O₆X₂

Farbe und Form: Neat

Molekulargewicht: 300.35

Ref: TR-P688098

Poly(Methyl Methacrylate) (pMMAC) Nanospheres, 1500nm-11500nm

CAS: 9011-14-7

Formel: (C₅O₂H₈)n

Farbe und Form: White, Powder

Ref: SR-64798

Poly(methyl methacrylate) NA

CAS: 9011-14-7

Poly(methyl methacrylate) (PMMA) is a polymerized form of methyl methacrylate. It has been used in a variety of coatings, including those that are used to coat the inside of tubes, such as blood vessels and airways. PMMA can also be used as an antigen in humans to induce an immune response against influenza. The sequences of PMMA are similar to those found in influenza virus and this makes it suitable for use as a vaccine. Symptoms of exposure to PMMA include eye irritation and allergic responses, including redness and swelling. The assay sensitivity was determined by measuring how much fluorescence is released when the polymer is exposed to xylene. Acrylates are monomers that can be polymerized with PMMA to produce polyacrylate-co-polymethacrylate copolymers, which have lower toxicity than polymethacrylate homopolymers or acrylates homopolymers. Kinetic studies have

Formel: (C₅H₈O₂)n

Farbe und Form: Powder

Ref: 3D-FP37478