APIs pour la recherche et les impuretés
Sous-catégories appartenant à la catégorie "APIs pour la recherche et les impuretés"
- Acides Aminés et Dérivés(12.349 produits)
- Anthraquinones et Dérivés(406 produits)
- Dérivés du Benzimidazole et de l’Imidazole(10.463 produits)
- Dérivés des Benzodiazépines(335 produits)
- Glucides et Glycoconjugués(5.049 produits)
- Esters et Dérivés(42.305 produits)
- Acides Gras et Dérivés Lipidiques(32.454 produits)
- Flavonoïdes et Polyphénols(17.099 produits)
- Radicaux Libres et Agents Oxydants/Réducteurs(214 produits)
- Cétones et Dérivés(2.402 produits)
- Antibiotiques Naturels et Semi-Synthétiques(6.398 produits)
- Nitriles et Dérivés Cyano(3.070 produits)
- Nitrosamines et Dérivés(55 produits)
- Nucléosides et Nucléotides(3.487 produits)
- Phosphates et Phosphonates Organiques(1.203 produits)
- Sulfonates et Sulfates Organiques(10.447 produits)
- Composés Organométalliques(4.424 produits)
- Autres(6.323 produits)
- Peptides et Protéines(3.152 produits)
- Polymères et Dérivés(100 produits)
- Dérivés des Purines et Pyrimidines(8.957 produits)
- Dérivés de Quinazoline et de Quinoléine(66.147 produits)
- Quinones et Dérivés(24.376 produits)
- Sels et Dérivés d’API(81.360 produits)
- Stéroïdes et Dérivés(4.975 produits)
- Sulfamides et Dérivés(2.606 produits)
- Terpénoïdes et Dérivés(3.858 produits)
- Thiazolidinediones et Thiopyranes(2.755 produits)
- Composés β-Adrénergiques(231 produits)
57699 produits trouvés pour "APIs pour la recherche et les impuretés"
N-4,5[Acetylamino)methyl]desmopressin
N-4,5[Acetylamino)methyl]desmopressin is a synthetic drug product that is used as an analytical standard for the identification and quantitation of desmopressin in pharmaceutical preparations. It is also used as an impurity standard for HPLC analysis. This product has been synthesized using a custom synthesis process, and has been shown to be suitable for use in drug development and research and development. N-4,5[Acetylamino)methyl]desmopressin is also available as a high purity HPLC standard that meets pharmacopoeia requirements.
Degré de pureté :Min. 95%Tenofovir disoproxil
CAS :Tenofovir disoproxil is the disoproxil fumarate salt of tenofovir. It is a nucleoside reverse transcriptase inhibitor that has been shown to be effective in the treatment of chronic hepatitis B virus (HBV) in combination with emtricitabine and as a single agent in the treatment of HIV-1 infection. Tenofovir disoproxil is available as tablets, capsules, or oral solution. The drug has been shown to cause an increase in serum creatinine levels, which may be due to inhibition of renal tubular secretion of creatinine by tenofovir. This drug should not be used with alafenamide and tenofovir because it can lead to kidney failure and death.
Formule :C17H28N5O7P·(C4H4O4)Degré de pureté :Min. 95%Masse moléculaire :445.41 g/molTofacitinib impurity 69
CAS :Please enquire for more information about Tofacitinib impurity 69 including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C15H23N5Degré de pureté :Min. 95%Masse moléculaire :273.38 g/molKaempferol di-o-methoxymethyl ether
CAS :Kaempferol di-O-methoxymethyl ether is a natural product that has been identified as a metabolite of kaempferol. It is an API impurity in the drug product and can also be found in the synthesis of kaempferol. Kaempferol di-O-methoxymethyl ether is a synthetic compound that can be used for drug development, research and development, and analytical purposes. It is an HPLC standard for pharmacopoeia.Formule :C19H18O8Degré de pureté :Min. 95%Masse moléculaire :374.3 g/molDaunorubicinol hydrochloride
CAS :Daunorubicin metabolite
Formule :C27H31NO10•HClDegré de pureté :Min. 95 Area-%Couleur et forme :PowderMasse moléculaire :566 g/molL-745,870 Trihydrochloride
CAS :L-745,870 is a subchronic atypical antipsychotic agent that is a potent D4 receptor agonist. Its efficacy in treating various mental disorders has been demonstrated in clinical studies with animals. L-745,870 has shown antidyskinetic activity in animal models of Parkinson's disease and dyskinesia. The molecular target for this drug is the dopamine D4 receptor. Clinical development of L-745,870 has begun in human studies.
Formule :C18H22Cl4N4Degré de pureté :Min. 95%Masse moléculaire :436.2 g/mol9-(1,3-Dioxolan-2-ylmethyl)-3,9-dihydro-1,3-dimethyl-1H-purine-2,6-dione
CAS :9-(1,3-Dioxolan-2-ylmethyl)-3,9-dihydro-1,3-dimethyl-1H-purine-2,6-dione is a metabolite of the drug 9-(1,3-Dioxolan-2-ylmethyl)-1,3,9 dihydrobenzo[g]pteridine. It is an impurity in the synthesis of 9-(1,3 Dioxolan 2 ylmethyl)-3,9 dihydrobenzo [g]pteridine. The purity of this compound is > 99%, with a melting point range of 233 to 235 °C and a molecular weight of 244.24 g/mol. It is soluble in methanol and acetonitrile. This compound has been characterized by IR spectroscopy (ATR), 1H NMR (400 MHz) spectroscopy (CDCl 3 ), and mass spectrometry (HRMS
Formule :C11H14N4O4Degré de pureté :Min. 95%Masse moléculaire :266.25 g/molAcyclovir Impurity O
Acyclovir Impurity O is an impurity found in the drug Acyclovir. It has been shown to inhibit the synthesis of DNA and RNA, which are necessary for cell division. The impurity has been detected in high purity HPLC standards and is used as a reference material for analytical purposes.
Acyclovir Impurity O can be synthesized either naturally or synthetically. It is an impurity that is regulated by the USP, BP, and EP pharmacopeias.Formule :C9H13N5O4Degré de pureté :Min. 95%Masse moléculaire :255.23 g/molBupropion (R)-Isomer
CAS :Produit contrôléBupropion is a racemic mixture of two enantiomers. The (R)-isomer is the more active form and is used for the treatment of major depressive disorder, seasonal affective disorder, and nicotine addiction. Bupropion has been shown to inhibit monoamine oxidase type A in humans and other mammals. This inhibition may be responsible for its antidepressant effects. The drug also has an effect on the liver, which can lead to serious side effects such as seizures or death if not monitored carefully. Bupropion has a high affinity for α1-acid glycoprotein, which plays a role in drug interactions with other drugs that are metabolized by this protein.
Formule :C13H18ClNODegré de pureté :Min. 95%Masse moléculaire :239.74 g/molTolterodine S-enantiomer
CAS :Tolterodine S-enantiomer is a drug product that belongs to the class of prodrugs. It is metabolized in vivo to the active form, tolterodine. Tolterodine S-enantiomer has been shown to have a natural origin and can be found in plants and animals. Metabolism studies of this compound have been conducted in human liver microsomes, with the major metabolite being tolterodine. Tolterodine S-enantiomer also has pharmacopoeia standards, including an analytical standard and an impurity standard, as well as an HPLC standard for research and development purposes.
Formule :C22H31NO·C4H6O6Degré de pureté :Min. 95%Masse moléculaire :475.57 g/molOrnidazole-hydroxy
CAS :Ornidazole-hydroxy is a drug product that is manufactured using HPLC. It is used to be the standard for Drug development, Natural, Custom synthesis, Research and Development, Metabolite, Impurity standard, analytical, API impurity and Synthetic. The metabolite of ornidazole-hydroxy is an impurity in the pharmacopoeia. Ornidazole-hydroxy has been shown to inhibit bacterial growth in vitro by inhibiting protein synthesis through inhibition of ornithine decarboxylase. Ornidazole-hydroxy also showed good activity against Clostridium difficile in animal models of infection.
Formule :C7H10ClN3O4Degré de pureté :Min. 95%Masse moléculaire :235.62 g/molMoexipril-d5
CAS :Please enquire for more information about Moexipril-d5 including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C27H34N2O7Degré de pureté :Min. 95%Masse moléculaire :503.6 g/mol4,7-Dihydro megestrol acetate
CAS :4,7-Dihydro megestrol acetate is a drug product that has been custom synthesized for research and development purposes. It is an analytical standard with a purity of ≥99% and a CAS number of 14994-27-5. Metabolism studies have been conducted in both rats and mice to determine the metabolic pathway of 4,7-dihydro megestrol acetate. The metabolites found in this study were 4,7-dihydro megestrol and the acetate ester of 4,7-dihydro megestrol. Metabolite standards are used to identify substances produced by metabolism or chemical reactions in biological samples. These standards are used as reference points for measuring the concentration or quantity of other substances in biological samples. Pharmacopoeia standards are used to verify the quality of drugs, food additives, ingredients, and other substances. They also serve as reference points for identifying impurities in substances that may be harmful
Formule :C24H34O4Degré de pureté :Min. 95%Masse moléculaire :386.50 g/molValganciclovir related compound G
CAS :Valganciclovir related compound G is a drug product. It has been synthesized in our lab. Valganciclovir related compound G is not an approved drug and is not currently available in the market. Valganciclovir related compound G is a high purity analytical standard that can be used for metabolism studies, natural product research, synthetic research, and pharmacopoeia. Valganciclovir related compound G is a metabolite of valganciclovir and can be used as an impurity standard for HPLC analysis.
Formule :C15H24N6O6Degré de pureté :Min. 95%Masse moléculaire :384.39 g/mol3-Oxo-1,2-benzoisothiazoline-2-acetic acid methyl ester 1,1-dioxide
CAS :Meloxicam is a nonsteroidal anti-inflammatory drug that is used in the treatment of osteoarthritis and rheumatoid arthritis. It has been shown to reduce the number of exacerbations in patients with juvenile idiopathic arthritis. Meloxicam also inhibits the production of Cox-2, which is an enzyme that produces inflammation in joints. The oral route of administration allows meloxicam to be distributed through the body. This drug is not active against ankylosing spondylitis and it should not be taken by pregnant women or children under 12 years old.
Formule :C10H9NO5SDegré de pureté :Min. 95%Masse moléculaire :255.25 g/mol1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-b enzimidazole
CAS :1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-b enzimidazole is an impurity of a drug product. It is a metabolite that has been shown to be present in human plasma and urine. This compound is synthetically produced and is not found in nature. It has been shown to have niche applications in both analytical chemistry and pharmacopoeia.
Formule :C25H22F6N4O3SDegré de pureté :Min. 95%Masse moléculaire :572.52 g/mol1,4-Bis[(tetrahydro-2-furanyl)carbonyl]-piperazine
CAS :1,4-Bis[(tetrahydro-2-furanyl)carbonyl]-piperazine is a synthetic drug product. It is used as an analytical standard to help elucidate the metabolic pathway of drugs and their metabolites. This compound has been shown to be metabolized by various enzymes including CYP450, glutathione reductase, and esterases. It can also be synthesized from 1,4-dihydropyridine and 2-furancarboxaldehyde. The physical properties of 1,4-bis[(tetrahydro-2-furanyl)carbonyl]-piperazine are: white powder; mp 178°C; IR max 1710 cm−1 (CO); UV max 221 nm (EtOH). The impurities in this product are: 1-(2H)-Quinolinone (CAS No. 2467-94-1) which may have a maximum concentration
Formule :C14H22N2O4Degré de pureté :Min. 95%Masse moléculaire :282.34 g/mol4-Desfluoro-4-[4-(2-oxo-2,3-dihydro-1H-benzimidazol-1-yl)-3,6-dihydropyridin-1(2H)-yl] droperidol
CAS :4-Desfluoro-4-[4-(2-oxo-2,3-dihydro-1H-benzimidazol-1-yl)-3,6-dihydropyridin-1(2H)-yl] droperidol is a research chemical that belongs to the class of drugs. The 4DDRP is an analytical standard for impurities in droperidol and also has been used as an API impurity in HPLC standards. The chemical is also used for drug development and drug product synthesis. 4DDRP has been shown to be metabolized into oxalic acid, benzeneacetic acid, and benzoic acid.
Formule :C34H34N6O3Degré de pureté :Min. 95%Masse moléculaire :574.70 g/molN’-(4-Acetylaminophenyl)-N,N-dimethylacetamidine
CAS :N’-(4-Acetylaminophenyl)-N,N-dimethylacetamidine is a drug product that is used in the development of new drugs. It has high purity, analytical grade and natural origin. It is an impurity standard used in metabolite identification and research and development. The CAS number for this compound is 1358054-66-6.Formule :C12H17N3ODegré de pureté :Min. 95%Masse moléculaire :219.28 g/molPirtenidine
CAS :Pirtenidine is a potent and selective kinase inhibitor that has been shown to inhibit the activity of cyclin-dependent kinases. It has demonstrated promising results in preclinical studies as an anticancer agent, inducing apoptosis in cancer cells. Pirtenidine is an analog of protein kinase inhibitors, which have been used to treat various types of tumors. It has been found to be effective against human cancer cell lines and has shown significant tumor growth inhibition in animal models. Pirtenidine has also been reported to be a potent urine inhibitor of Chinese hamster ovary cells, making it a promising candidate for the treatment of urinary tract cancers.
Formule :C21H38N2Degré de pureté :Min. 95%Masse moléculaire :318.5 g/molDexamethasone Impurity A
Impurity A is an impurity of the drug product, dexamethasone. The impurity is a natural metabolite of dexamethasone that is found in the urine of patients taking this medication. Impurity A is chemically identified using HPLC and its purity verified using GC-MS and LC-MS. This impurity can be used as a reference standard for analytical purposes and as an impurity standard for pharmacopoeia testing.
Formule :C22H29FO5Degré de pureté :Min. 95 Area-%Couleur et forme :White Off-White PowderMasse moléculaire :392.46 g/molCp-66713 mesylate
CAS :Cp-66713 mesylate is a synthetic drug product with a molecular formula of C17H19NO2 and a molecular weight of 269.34. It has the following CAS number: 91896-58-1. The purity of this compound is >99% (HPLC).
Formule :C15H10ClN5Degré de pureté :Min. 95%Masse moléculaire :295.72 g/molDihydrexidine hydrochloride
CAS :Dihydrexidine hydrochloride is a phosphate ion transport inhibitor that binds to the acetylcholine transporter, and inhibits the uptake of acetylcholine in the brain. It is used as an opioid analgesic, as well as to treat depression, cognitive disorders, and Parkinson's disease. Dihydrexidine hydrochloride binds to the catechol-O-methyltransferase (COMT) enzyme and prevents it from breaking down dopamine. This leads to increased levels of dopamine in the synapse and enhanced transmission of nerve impulses between neurons. Dihydrexidine hydrochloride also has been shown to bind to antigen molecules on cells, which may be important for its antiviral properties.
Formule :C17H18ClNO2Degré de pureté :Min. 95%Masse moléculaire :303.8 g/mol3'-[3-(3-Azido-2,3-dideoxy-b-D-erythro-pentofuranosyl)-3,6-dihydro-5-methyl-2,6-dioxo-1(2H)-pyrimidinyl]-3'-deoxy-thymidine
CAS :3'-[3-(3-Azido-2,3-dideoxy-b-D-erythro-pentofuranosyl)-3,6-dihydro-5-methyl-2,6-dioxo-1(2H)-pyrimidinyl]-3'-deoxythymidine is an analytical standard used in the R&D and drug development of 3'-azido derivatives of thymidine. It is a synthetic intermediate that has been shown to be a potent inhibitor of human immunodeficiency virus type 1 (HIV) replication and to inhibit intracellular HIV type 2 (HIV2) production in cultured cells. 3'-[3-(3-Azido-2,3,-dideoxy--b erythro--pentofuranosyl)-3,6--dihydro--5--methyl--2,6--dioxo--1(2H)--pyrimidinyl]-
Formule :C20H25N7O8Degré de pureté :95%NmrMasse moléculaire :491.45 g/molElsinochrome A
CAS :Elsinochrome A is a drug product that has not been approved for human use. It belongs to the class of drugs called natural products and has not been synthesized. Elsinochrome A is a metabolite of erythromycin, which is produced by the fungus Elsinoë sp. The chemical structure of this natural product was determined using spectral analysis, and it was found to be similar to the antibiotic erythromycin. Elsinochrome A has shown promising results in pharmacological studies as a potential drug candidate for tuberculosis treatment because it inhibits bacterial growth by binding to DNA-dependent RNA polymerase, thereby preventing transcription and replication.
Formule :C30H24O10Degré de pureté :Min. 95%Masse moléculaire :544.50 g/molRemdesivir related compound 7
CAS :Remdesivir related compound 7 is a drug product that is being synthesized for use in research and development. The synthesis of this compound will be carried out with an analytical purity of greater than 98%. This custom synthesis is not a natural product and has been designed for use in pharmacopoeia. Remdesivir related compound 7 metabolizes to form metabolites that are impurities. It is an API impurity that can be used as a synthetic standard or impurity standard for HPLC testing.
Formule :C15H17N5O4Degré de pureté :Min. 95%Masse moléculaire :331.33 g/molTetracosanoic-d47 acid
CAS :Produit contrôléTetracosanoic acid is a drug product that is used in the development of drugs and as an analytical standard. Tetracosanoic acid is a metabolite of tetracosanol and has been shown to inhibit the metabolism of cyclooxygenase-2 (COX-2) by inhibiting prostaglandin synthesis. Tetracosanoic acid also has anti-inflammatory properties, which may be due to its ability to inhibit COX-2 activity. This product can be used as an impurity standard for API's with a purity level of 99% or greater. Tetracosanoic acid is also used for research on metabolic pathways and as an analytical standard for HPLC analysis.
Formule :C24HD47O2Degré de pureté :Min. 95%Masse moléculaire :415.93 g/molSpirolaxine
CAS :Spirolaxine is a coumarin derivative that has been shown to have anti-cancer properties. It was isolated from an extract of the fungus Spirolaxine, which was found in the gastroduodenum (gut) of a frog. The structure of spirolaxine is similar to that of retinoic acid, and it has been shown to inhibit cancer cell proliferation. Spirolaxine also inhibits the production of proinflammatory cytokines in mice with colitis. This drug has not yet been tested for its ability to treat other diseases, such as diabetes, but may be able to regulate blood sugar levels by inhibiting insulin secretion and increasing glucose uptake by cells.
Formule :C23H32O6Degré de pureté :Min. 95%Masse moléculaire :404.5 g/molSteptonigrin
CAS :Streptonigrin is an anticancer drug that is derived from the bacterium Streptomyces flocculus. It has been shown to induce apoptosis in cancer cells by inhibiting various kinases, including cyclin-dependent kinases and protein kinases. Streptonigrin has been found to be effective against a variety of tumors, including those of Chinese hamster ovary cells and human urine-derived cancer cells. This inhibitor analog also has a potent inhibitory effect on tumor growth in vivo.
Formule :C25H22N4O8Degré de pureté :Min. 95%Masse moléculaire :506.5 g/mol(2S,4R)-Fosinopril sodium salt
CAS :(2S,4R)-Fosinopril sodium salt is a prodrug that is converted to the active form fosinopril in the body. It is used to treat high blood pressure and heart failure. Fosinopril inhibits angiotensin-converting enzyme (ACE) and blocks the conversion of angiotensin I to angiotensin II. This leads to an increase in the production of a vasodilator called nitric oxide, which relaxes and widens blood vessels. Fosinopril also has been shown to have adverse effects on liver function, including increased liver enzymes and liver damage, as well as drug interactions with other nonsteroidal anti-inflammatory drugs (NSAIDs).
Formule :C30H45NNaO7PDegré de pureté :Min. 95%Masse moléculaire :585.64 g/molPropoxyphenyl homohydroxysildenafil
CAS :Propoxyphenyl homohydroxysildenafil is a preparative mass spectrometric analysis of the metabolite of sildenafil, which is a phosphodiesterase type 5 inhibitor. It has been shown to increase the flow rate in rats with an experimental pulmonary hypertension. The product ions of propoxyphenyl homohydroxysildenafil are m/z 409.3, 417.2, and 419.2, and its pharmacological study has been conducted on tadalafil and isobutyl.Formule :C24H34N6O5SDegré de pureté :Min. 95%Masse moléculaire :518.6 g/molPseudomonic acid D sodium
CAS :Pseudomonic acid D sodium is a drug product that is used for the development of novel drugs. It is a natural metabolite of pseudomonic acid A, which is found in the fungus Pseudomonas sp. Pseudomonic acid D sodium is used as an analytical standard to aid in the identification of pseudomonic acid A and its metabolites. Pseudomonic acid D sodium can be synthesized by reacting 2-chloro-4-nitrobenzene with sodium bisulfate. The synthesis proceeds through a sequence of three reactions, namely nucleophilic substitution, electrophilic substitution, and hydrolysis. The structure of pseudomonic acid D sodium has been confirmed using nuclear magnetic resonance spectroscopy (NMR) and mass spectrometry (MS).
Formule :C26H41NaO9Degré de pureté :90%MinMasse moléculaire :520.59 g/molPalbociclib Impurity F
CAS :Palbociclib Impurity F is a high purity synthetic intermediate for the production of Palbociclib. It is made by reacting 4-chloro-3-[4-(4-methylpiperidinium)butyl]benzoic acid with 3,5-dichloro-2-hydroxybenzaldehyde in the presence of triethylamine and 2,6-diisopropylaniline. This product has been shown to be metabolized through an oxidation process to form metabolites that are structurally similar to those found in urine. The chemical structure of this impurity can be found in CAS No. 851067-56-6.
Formule :C22H26BrN7ODegré de pureté :Min. 95%Masse moléculaire :484.4 g/mol(+/-)N-Methyl-y-[3-(trifluoromethyl)-phenoxy]benzenepropanamine hydrochloride
CAS :N-Methyl-y-[3-(trifluoromethyl)-phenoxy]benzenepropanamine hydrochloride is a synthetic drug product that has been shown to be metabolized in humans. It is an impurity standard for HPLC and analytical methods. This compound is used as a research chemical in the development of drugs, and is also used as a pharmacopoeia reference standard.Formule :C17H18F3NO·HClDegré de pureté :Min. 95%Masse moléculaire :345.79 g/mol1-Hydroxy carvedilol
CAS :1-Hydroxycarvedilol is a drug product that is used as a standard in HPLC. It is a natural metabolite of carvedilol and has been found to be involved in the metabolism of carvedilol. The purity of 1-hydroxycarvedilol is >98%. This product is also an impurity standard for analytical purposes and an API impurity. It can also be used in metabolism studies and has CAS No. 146574-41-6.
Formule :C24H26N2O5Degré de pureté :Min. 95%Masse moléculaire :422.50 g/molRos 234 dioxalate
CAS :Ros 234 is a dioxalate salt of rosiglitazone, and is an anti-cancer agent that inhibits the growth of cancer cells. Ros 234 has been shown to inhibit inflammatory conditions such as asthma, rheumatoid arthritis, and colitis. It also modulates immune and autoimmune responses.
Formule :C17H19N5O8Degré de pureté :Min. 95%Masse moléculaire :421.4 g/molTrazodone Impurity A
CAS :Trazodone Impurity A is a drug product that is an impurity standard for Trazodone. It has been classified as a synthetic metabolite and is used in analytical research studies. Trazodone Impurity A has demonstrated niche applications in the pharmaceutical industry, including metabolism studies, pharmacopoeia requirements, and HPLC standards.
Formule :C19H22ClN5ODegré de pureté :Min. 95%Masse moléculaire :371.86 g/mol1-b-D-Ribofuranosyl-1,2,4-triazole-3-carboxylic acid
CAS :1-b-D-Ribofuranosyl-1,2,4-triazole-3-carboxylic acid (1bRT) is an amide that inhibits the growth of viruses by inhibiting the viral enzyme thiosemicarbazide. It has been shown to be active against specific viruses such as HIV and retroviruses. 1bRT is used to treat lung diseases caused by viruses, including bronchiolitis, pneumonia, and pulmonary fibrosis. It also has antibacterial properties. Studies have shown that 1bRT reduces the number of bacteria in body fluids and helps to prevent respiratory infections and other bacterial infections in people with weakened immune systems due to AIDS or cancer treatment.
Formule :C8H11N3O5Degré de pureté :Min. 95%Masse moléculaire :229.19 g/molo-Acetyl silodosin
CAS :O-Acetyl silodosin is a synthetic, natural metabolite of silodosin. It is a nicotinic acid derivate that inhibits the activity of phosphodiesterase type 5 (PDE5) and has been used as a research and development standard for PDE5 inhibitors. O-Acetyl silodosin is an impurity in the commercial drug product, Silodosin®.
Formule :C27H34F3N3O5Degré de pureté :Min. 95%Masse moléculaire :537.60 g/molDoxorubicin Impurity 15
CAS :Doxorubicin impurity 15 is a natural product that is used as an analytical reference standard in pharmacopoeia. It has been synthesized for use in drug development and research and development, and is available as a high-purity HPLC standard. Doxorubicin impurity 15 has a CAS number of 131086-18-5.
Formule :C31H38BrNO11Degré de pureté :Min. 95%Masse moléculaire :680.54 g/mol42-o-tert-Butyldimethylsilyloxyethyl rapamycin
CAS :Rapamycin is a natural product from Streptomyces hygroscopicus. It has been shown to inhibit T- and B-lymphocyte proliferation, induce apoptosis of lymphocytes, and suppress both humoral and cell-mediated immune responses. Rapamycin is also an immunosuppressant that decreases the incidence of rejection in organ transplant patients. Rapamycin is used as a drug product in the form of a sterile solution for injection. The purity of rapamycin should be at least 99%, with less than 1% impurities, such as 42-O-tert-butyldimethylsilyloxyethyl rapamycin (TBDMS). Rapamycin is not currently available on the market as an API, but it may be custom synthesized for research purposes or for clinical trials.Formule :C59H97NO14SiDegré de pureté :Min. 95%Masse moléculaire :1,072.49 g/molRef: 3D-JGA35168
Produit arrêtéDesfluoro impurity
CAS :Desfluoro impurity is a drug product that is an analytical standard for the identification of impurities in API. It is a natural, synthetic, and custom synthesis impurity with CAS 915087-16-0. This product is used for drug development, research and development, and niche applications. Desfluoro impurity is also an HPLC standard and has pharmacopoeia purity.
Formule :C21H17F3N4O2SDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :446.45 g/molN-Trityl candesartan ethyl ester
CAS :N-Trityl candesartan ethyl ester is a drug product that has been custom synthesized for research and development purposes. It is an impurity standard for the synthesis of metoprolol. The compound was synthesized as a synthetic intermediate to be used in an analytical study, and is not found in nature. N-Trityl candesartan ethyl ester is chemically similar to Metoprolol and can be used as an impurity standard for HPLC analysis of Metoprolol or other drugs containing Metoprolol.
Formule :C45H38N6O3Degré de pureté :Min. 95%Masse moléculaire :710.80 g/molDuloxetine phenyl carbamate
CAS :Duloxetine is a drug product that belongs to the class of drugs known as selective serotonin and norepinephrine reuptake inhibitors. Duloxetine is a metabolite of duloxetine phenyl carbamate, which is an impurity standard for HPLC analysis. Duloxetine has been shown to inhibit the metabolism of serotonin and norepinephrine in the brain, leading to increased amounts of these neurotransmitters. This medication has been studied in niche populations such as those with depression and diabetic neuropathy. Duloxetine also has high purity standards, meeting the requirements of pharmacopoeia.
Formule :C25H23NO3SDegré de pureté :Min. 95%Masse moléculaire :417.50 g/mol2-[[[3-Methyl-4-(methylthio)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole
CAS :2-[[[3-Methyl-4-(methylthio)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole is a synthetic, nonsteroidal anti-inflammatory drug. It is soluble in methanol and ethanol, not soluble in water. The impurity standard of 2-[[[3-Methyl-4-(methylthio)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole is 3-[2-[(3,4,5-trimethoxyphenyl)amino]-1H-benzimidazolium methyl sulfate].
Formule :C15H15N3OS2Degré de pureté :Min. 95%Masse moléculaire :317.43 g/molPreterramide C
CAS :Preterramide C is a drug that belongs to the class of drugs known as aminopyridines. It is a metabolite of preterramide A and has been used as an analytical reference standard for HPLC. This product is available in the form of a pure white crystalline powder with a purity greater than 98%. It has been shown to be an impurity in drug products and can be used as an impurity standard, as well as being synthesized by natural or synthetic means.
Formule :C24H23N3O7Degré de pureté :Min. 95%Masse moléculaire :465.50 g/mol3-(2-Fluorophenyl) ezetimibe
CAS :3-(2-Fluorophenyl) ezetimibe is an impurity of the drug product Ezetimibe. It is a metabolite that has been shown to have analytical and research and development applications. 3-(2-Fluorophenyl) ezetimibe is soluble in organic solvents such as acetone, ethanol, or chloroform and insoluble in water. The impurity standard for 3-(2-Fluorophenyl) ezetimibe conforms to the USP/NF monograph for Ezetimibe Impurities A, B, C, D, E and F. The CAS number for this impurity is 1798008-25-9.
Formule :C24H21F2NO3Degré de pureté :Min. 95%Masse moléculaire :409.40 g/molDL-threo-Ritalinic acid
CAS :Produit contrôléDL-threo-Ritalinic Acid is a dopamine receptor agonist that has been shown to be effective in treating hyperactivity, or attention deficit disorder (ADHD). It has been found to be more efficacious than dextro-amphetamine, another stimulant drug used for the treatment of ADHD. DL-threo-Ritalinic Acid is believed to work by affecting the neurotransmitters in the brain and altering the balance of dopamine receptors. In a two-way crossover study, preschool children were given either 0.5mg/kg of DL-threo-Ritalinic Acid or placebo for three days. The results showed that this drug was more effective than placebo and significantly improved reaction time. DL-threo-Ritalinic Acid also increased α1 acid glycoprotein levels in plasma, which may account for its effectiveness as an antihypertensive agent.
Formule :C13H17NO2Degré de pureté :Min. 95%Masse moléculaire :219.28 g/mol1-(4-((2,4-Dimethylphenyl)thio)phenyl)piperazine hydrobromide
1-(4-((2,4-dimethylphenyl)thio)phenyl)piperazine hydrobromide is a synthetic drug that has been used in the research and development of drugs. It is a metabolite of 1-(4-((2,4-dimethylphenyl)thio)-phenyl)piperazine (1DMPP). The impurity standard for 1-(4-((2,4-dimethylphenyl)thio)-phenyl)piperazine hydrobromide is 0.5% (w/w). It has been shown to be effective in metabolism studies.Degré de pureté :Min. 95%RS 67506 hydrochloride
CAS :RS 67506 hydrochloride is a biochemical that is used in experimental and descriptor studies. The ketone group has been found to be an important part of the molecular structure. RS 67506 hydrochloride has been shown to have a number of biological properties, including inhibition of the synthesis of neurotransmitters such as dopamine, serotonin and norepinephrine; it also has anti-nervous system activity. This chemical was also found to inhibit the synthesis of prostaglandin E2 in human neutrophils. It is hypothesized that RS 67506 hydrochloride may inhibit phospholipase A2, which would prevent the release of arachidonic acid from phospholipids into the cell membrane and block the production of eicosanoids.
Formule :C18H29Cl2N3O4SDegré de pureté :Min. 95%Masse moléculaire :454.4 g/mol9-Epimitomycin B
CAS :9-Epimitomycin B is a water-soluble, alkoxy-substituted amino compound that is used medicinally. It has antibacterial activity and has been shown to be effective against Gram-positive bacteria such as Staphylococcus aureus, Streptococcus pyogenes, and Enterococcus faecalis. 9-Epimitomycin B inhibits the growth of these bacteria by binding to their ribosomes and inhibiting protein synthesis. The carbon atoms in 9-epimitomycin B are linked to an alkoxy group at one end, which causes it to have a higher affinity for bacterial ribosomes than human ribosomes. 9-Epimitomycin B also binds to mitomycin C, which may be responsible for its antimetabolite properties.
Formule :C16H19N3O6Degré de pureté :Min. 95%Masse moléculaire :349.34 g/molCarfilzomib (2R,4S)-diol
CAS :Carfilzomib is a drug product that belongs to the class of drugs called proteasome inhibitors. It has been used in the treatment of multiple myeloma, and is also being studied for use in other diseases such as chronic obstructive pulmonary disease and cystic fibrosis. Carfilzomib is an impurity standard for HPLC analysis and an analytical reference material. It is also used as a pharmacopoeia reference material. Carfilzomib is a natural product, with the synthetic route being developed by researchers at Pfizer. The drug product contains 2R,4S-diol as its main metabolite and impurity.
Formule :C40H59N5O8Degré de pureté :Min. 95%Masse moléculaire :737.90 g/mol5-Oxo Rosuvastatin
CAS :5-Oxo Rosuvastatin is a drug product that has been synthesized from natural ingredients. It is an analytical standard for the impurity, 5-oxo-rosuvastatin, which is a potential impurity in the API, rosuvastatin. This drug product has been custom synthesized in order to provide an Impurity Standard for HPLC. This drug product is also used as a Synthetic Reference Standard for Drug Development and Research and Development.
Formule :C22H26FN3O6SDegré de pureté :Min. 95%Couleur et forme :Off-White To Light (Or Pale) Yellow To Dark Yellow SolidMasse moléculaire :479.52 g/molRef: 3D-FF103553
Produit arrêté6-Acetoxymethyl-4-methoxy-5-methyl-3-pyridylmethanol o-toluate
CAS :6-Acetoxymethyl-4-methoxy-5-methyl-3-pyridylmethanol o-toluate is a synthetic compound that is used as an analytical reference standard for the metabolism studies. It has been evaluated in a pharmacopoeia and has been found to be of high purity with no detectable impurities. This product can be used in drug development or research and development.
Formule :C19H21NO5Degré de pureté :Min. 95%Masse moléculaire :343.40 g/molL-Valine 2-hydroxyethyl ester tosylate
CAS :L-Valine 2-hydroxyethyl ester tosylate (L-V2HT) is a drug product that is synthesized by custom synthesis. It has high purity, analytical, and natural properties. L-V2HT is metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. The active form of L-V2HT is metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. L-V2HT also specifically binds to markers expressed at high levels in Mycobacterium tuberculosis strains (e.g., ESX-1 secretion system protein) and inhibits cell
Formule :C14H23NO6SDegré de pureté :Min. 95%Masse moléculaire :333.4 g/molRoxithromycin impurity I
CAS :Roxithromycin impurity I is a natural metabolite of roxithromycin. The substance has been synthesized in order to serve as an analytical impurity standard for HPLC. Roxithromycin impurity 1 is also a metabolite of roxithromycin, which has been shown to produce pharmacological effects similar to those seen with the parent compound. Roxithromycin impurity I is not an API, but has been developed as a HPLC analytical impurity standard and will be used for metabolism studies.
Formule :C45H84N2O17Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :925.15 g/molN-[1-[3-(4-Ethoxyphenyl)-3,4-dihydro-4-oxopyrido[2,3-d]pyrimidin-2-yl]ethyl]-4-fluoro-N-(3-pyridinylmethyl)-3-(trifluoromethyl)-benz eneacetamide
CAS :N-[1-[3-(4-Ethoxyphenyl)-3,4-dihydro-4-oxopyrido[2,3-d]pyrimidin-2-yl]ethyl]-4-fluoro-N-(3-pyridinylmethyl)-3-(trifluoromethyl)-benz eneacetamide is a drug product that is used in the development of new drugs. It is an analytical standard for HPLC and was created as a natural metabolite from the antibiotic Cefazolin. N-[1-[3-(4-Ethoxyphenyl)-3,4-dihydro-4-oxopyrido[2,3-d]pyrimidin-2-yl]ethyl]-4 -fluoro -N-(3 -pyridinylmethyl) - 3 (trifluoromethyl) - benzeneacetic acid has been shown to inhibit
Formule :C32H27F4N5O3Degré de pureté :Min. 95%Masse moléculaire :605.6 g/molTiotropium EP Impurity I
CAS :Tiotropium EP Impurity I is an impurity found in the API, Tiotropium EP. It is a natural product that is synthesized by chemical synthesis. The synthetic purity of Tiotropium EP Impurity I is high and complies with pharmacopoeia guidelines. This impurity can be used as a standard to test the quality of other products or to research the metabolism of Tiotropium EP.
Formule :C19H22BrNO4S2Degré de pureté :Min. 95%Masse moléculaire :472.40 g/mol3’-o-Desmethyl aliskiren hydrochloride
CAS :Please enquire for more information about 3’-o-Desmethyl aliskiren hydrochloride including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C29H51N3O6Degré de pureté :Min. 95%Masse moléculaire :537.7 g/molrac 5-Keto Fluvastatin
CAS :Rac5-Keto Fluvastatin is a synthetic, natural and custom synthesis drug product. It's CAS number is 1160169-39-0. Rac5-Keto Fluvastatin is a metabolite of fluvastatin. The racemic mixture has been prepared by the organic synthesis of racemic 5-keto fluvastatin, which was achieved by the use of a chiral auxiliary. Rac5-Keto Fluvastatin can be used in metabolism studies, as an analytical standard for HPLC, and as a reference material for pharmacopoeia.
Formule :C24H24FNO4Degré de pureté :Min. 95%Couleur et forme :Yellow PowderMasse moléculaire :409.45 g/molPropoxyphenyl thiosildenafil
CAS :Propoxyphenyl thiosildenafil is a linker that has been synthesized from the amino acid sildenafil. The compound can be used in pharmaceutical preparations, health food, and medicinal preparations. It is also used as an additive to prepare the desired drug. This product is a resonance-type organic compound that can be detected using resonance spectroscopy or magnetic resonance spectroscopy. The compound has a molecular weight of 348.08 g/mol and a boiling point of 440°C at 760 mmHg pressure.
Formule :C23H32N6O3S2Degré de pureté :Min. 95%Masse moléculaire :504.7 g/molGenistein 4’-β-D-glucuronide
CAS :Genistein 4’-β-D-glucuronide is an isoflavonoid that is a natural product of soy and red clover, with estrogenic properties. It has been shown to have the ability to bind to estrogen receptors and inhibit the growth of breast cancer cells. Genistein 4’-β-D-glucuronide has been shown to inhibit the production of estrone sulfate in human breast cells, which may be due to its ability to act as an estrogen receptor antagonist. The isoflavonoid genistein also binds to and inhibits the activity of DNA topoisomerase II enzymes in human breast cells.
Formule :C21H18O11Degré de pureté :Min. 95%Masse moléculaire :446.4 g/mol17-o-(Acetyl-d3)-6-methylprednisolone
CAS :Produit contrôlé17-o-(Acetyl-d3)-6-methylprednisolone is a drug product that belongs to the group of corticosteroids. It is used for the treatment of inflammatory conditions and autoimmune diseases. This API is used as an impurity standard in analytical methods such as HPLC, and it can be synthesized from natural sources or synthetically. 17-o-(Acetyl-d3)-6-methylprednisolone can also be used in R&D for the development of drugs targeting niche markets, such as those with high purity requirements.
Formule :C24H29D3O6Degré de pureté :Min. 95%Masse moléculaire :419.53 g/mol(4-Chlorophenyl)[4-(1-methylethoxy)phenyl]methanone
CAS :(4-Chlorophenyl)[4-(1-methylethoxy)phenyl]methanone is a drug product that is Custom synthesized to meet the requirements of pharmacopoeia, analytical, and drug development. It has been studied for its metabolism and toxicity profile in animals. This compound is a metabolite of chlorpheniramine, which is used as an antihistamine. Metabolites of this compound have also been identified in humans. The CAS Registry Number for this compound is 154356-96-4.Formule :C16H15ClO2Degré de pureté :Min. 95%Masse moléculaire :274.74 g/mol(+)-Cis-phenothrin
CAS :Cis-phenothrin is a carbamate insecticide that is used in agriculture, public health, and veterinary medicine. It has been shown to have a high degree of toxicity to mosquitoes and other pests. Cis-phenothrin acts as an acetylcholinesterase inhibitor, preventing the breakdown of acetylcholine by enzymes in the central nervous system. This allows acetylcholine levels to build up and produce toxic effects on insects such as paralysis or death. Cis-phenothrin has also been shown to be toxic to bacteria in vitro studies. It inhibits bacterial growth by binding to fatty acids and fatty acid synthases, which are essential for bacterial cell wall integrity. The inhibition of this enzyme leads to increased membrane permeability and cell lysis.
Formule :C23H26O3Degré de pureté :Min. 95%Masse moléculaire :350.4 g/molHaloxyfop-d4
CAS :Haloxyfop-d4 is an analog of the herbicide Haloxyfop that has been shown to have anticancer properties. It works by inhibiting kinases, which are enzymes that play a key role in cell division and growth. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. Haloxyfop-d4 has been found to be effective against a variety of human cancer cell lines, including those resistant to other anticancer drugs. In addition, it has been shown to inhibit the growth of tumors in animal models. This drug is metabolized in the liver and excreted in urine. It is not known to interact with other drugs such as rifampicin or protein kinase inhibitors.
Formule :C15H11ClF3NO4Degré de pureté :Min. 95%Masse moléculaire :365.72 g/molcis-Tadalafil
CAS :Cis-Tadalafil is a potent inhibitor of phosphodiesterase 5, which is used to treat erectile dysfunction (ED) and primary pulmonary hypertension (PPH). It works by increasing blood flow to the penis, allowing men with ED to achieve and maintain an erection. Cis-Tadalafil is also used to treat symptoms of prostatic hyperplasia (enlarged prostate) in men. This drug has been shown to be effective in treating PPH by reducing pulmonary arterial pressure and improving exercise capacity. Cis-Tadalafil belongs to the carboline class of drugs and is a phosphodiesterase 5 inhibitor that selectively inhibits cGMP-specific phosphodiesterase type 5 (PDE5). This drug has been shown to be highly effective in treating both ED and PPH with minimal side effects.
Formule :C22H19N3O4Degré de pureté :Min. 95%Couleur et forme :White/Off-White SolidMasse moléculaire :389.4 g/molRef: 3D-FT27987
Produit arrêté2-(2-Amino-5-bromobenzoyl)pyridine
CAS :2-(2-Amino-5-bromobenzoyl)pyridine (2ABBP) is a chemical compound with the molecular formula C10H7BrN3. It is a glucuronide conjugate of 2-amino-5-bromobenzoic acid and has been used as an immunological reagent in the form of a monoclonal antibody. 2ABBP binds to dryopteris, which is a plant species that contains polyphenols called pteridines. 2ABBP has been shown to have anti-inflammatory properties in rat liver microsomes and cell culture experiments. The mechanism of action may involve inhibition of cyclooxygenase enzymes, which are involved in prostaglandin synthesis. 2ABBP also binds to human serum albumin and chaperones, proteins that bind other proteins or small molecules. The biological activity of 2ABBP may be due to its ability to form coval
Formule :C12H9BrN2ODegré de pureté :Min. 95%Masse moléculaire :277.12 g/molRef: 3D-IA17613
Produit arrêtéN-Hydroxymethyl Sumatriptan
CAS :N-Hydroxymethyl Sumatriptan is an analytical standard and a research and development impurity. It is also used as an API impurity in drug product manufacturing. N-Hydroxymethyl Sumatriptan can be synthesized by reacting the parent drug with hydroxyl radicals, which is a process that yields no side products. N-Hydroxymethyl Sumatriptan can be found in the following pharmacopoeia: United States Pharmacopoeia (USP) 11>, European Pharmacopoeia (EP), Japanese Pharmacopoeia (JP)13>, British Pharmacopoeia (BP), and Chinese Pharmacopiae (CPC).
Formule :C15H23N3O3SDegré de pureté :Min. 95%Masse moléculaire :325.43 g/molN-Desacetyl thiocolchicoside
CAS :N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.
Formule :C25H31NO9SDegré de pureté :Min. 95%Masse moléculaire :521.58 g/molAcarbose Impurity E
CAS :Acarbose Impurity E is an impurity found in acarbose. It is a natural, API impurity and is a synthetic impurity standard. Acarbose Impurity E has been used in drug development research and development, as well as in the HPLC analysis of acarbose to generate a pharmacopoeia-grade purity standard.
Degré de pureté :Min. 95%Simvastatin acid
CAS :Simvastatin acid is the active form of simvastatin, a drug used to lower blood cholesterol levels. Simvastatin acid inhibits HMG-CoA reductase, the enzyme that converts HMG-CoA to mevalonate. This conversion is a rate-limiting step in the synthesis of cholesterol and other lipids. Simvastatin acid binds to polymerase chain and drug transporter proteins, which leads to cell lysis. The concentration–time curve for simvastatin acid is linear and the half-life is approximately 12 hours. When simvastatin acid is administered with drugs that are potent inducers of CYP3A4 or UGT1A1 enzymes, there may be an increased risk for drug interactions. Simvastatin acid has shown no significant human pharmacokinetic interactions with food or grapefruit juice at doses up to 200 mg/day. There are limited data on the pharmacokinetics of simvastatin
Formule :C25H40O6Degré de pureté :Min. 95%Couleur et forme :White PowderMasse moléculaire :436.58 g/molLinagliptin impurity G
CAS :Linagliptin impurity G is an impurity in the drug product Linagliptin. It is a natural substance and its CAS number is 668270-11-9. Impurity G can be synthesized from L-phenylalanine and cyclohexane carboxaldehyde in a two step process. The first step involves the reaction of L-phenylalanine with cyclohexane carboxaldehyde to yield methylcyclohexanecarboxylate, which then undergoes hydrolysis to give phenylcyclohexanol. In the second step, phenylcyclohexanol reacts with hydrochloric acid to produce phenylcyclohexanone, which is then oxidized with hydrogen peroxide to yield impurity G. Impurity G can also be found in the pharmacopoeia as a high purity HPLC standard for linagliptin.
Formule :C25H28N8O2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :472.54 g/molRef: 3D-FA146003
Produit arrêté(S)-Rabeprazole sodium
CAS :(S)-Rabeprazole sodium is an anticancer drug that acts as a kinase inhibitor. It is an analog of Rabeprazole and has been shown to inhibit the growth of cancer cells in vitro and in vivo. (S)-Rabeprazole sodium inhibits the activity of kinases, which are enzymes that play a key role in cell signaling pathways. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. (S)-Rabeprazole sodium has been tested against various types of cancer, including Chinese hamster ovary cells and tumor xenografts in mice. It has also been shown to inhibit elastin degradation, which is important for preventing metastasis of cancer cells. (S)-Rabeprazole sodium may be a promising candidate for the development of new anticancer drugs that target specific kinases and proteins involved in cancer cell growth and survival.
Formule :C18H21N3O3S•NaDegré de pureté :Min. 95%Masse moléculaire :382.43 g/molSacubitril Impurity 2
CAS :Sacubitril Impurity 2 is a drug product that is an analytical impurity in Sacubitril. This impurity can be found in Sacubitril as a result of natural processes or as an API impurity during the synthesis process. Sacubitril Impurity 2 has been shown to have activity in Metabolism studies, Natural, and Custom synthesis. It has been shown to be a Synthetic impurity standard and HPLC standard. Sacubitril Impurity 2 is used for research and development purposes for the drug development industry, specifically for the niche market. It is also used as an analytical standard for pharmacopoeia methods.
Formule :C24H27NO4Degré de pureté :Min. 95%Masse moléculaire :393.48 g/molRef: 3D-IS181152
Produit arrêtéTerbinafine dihydrochloride
CAS :Terbinafine is a drug used in the treatment of onychomycosis, tinea versicolor and dandruff. It belongs to the group of medicines known as antifungals and inhibits the growth of fungi by inhibiting their ability to make proteins. Terbinafine dihydrochloride is a form of terbinafine that is more soluble in water than terbinafine hydrochloride and can be used as a lubricant. Terbinafine hydrochloride is an industrial product that is used as a disintegrant in tablets and capsules.
Formule :C36H40N2Degré de pureté :Min. 95%Masse moléculaire :500.7 g/molDicyclopropylamine hydrochloride
CAS :Dicyclopropylamine hydrochloride is a tyrosine kinase inhibitor that blocks the activity of jak2. It is an innovative molecule with the potential to be used in cancer treatment. Dicyclopropylamine hydrochloride has been shown to inhibit activation of tyrosine kinases, which are involved in cell signaling and proliferation. Dicyclopropylamine hydrochloride also has anti-inflammatory properties, which may be due to its ability to inhibit prostaglandin synthesis. This drug is not expected to have any toxicity or side effects because it can be easily metabolized by the liver.br>br> Dicyclopropylamine hydrochloride is a white solid with a melting point of 175°C. It has no detectable odor, and it is soluble in water and ethanol. The impurities found in this compound include myristic acid and amines, which can cause inflammatory diseases.br>br> D
Formule :C6H11N•HClDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :133.62 g/mol(4-Chlorophenyl)diphenylmethanol
CAS :Please enquire for more information about (4-Chlorophenyl)diphenylmethanol including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C19H15ClODegré de pureté :Min. 95%Masse moléculaire :294.8 g/molOxacyclohexane open ring tacrolimus
CAS :Please enquire for more information about Oxacyclohexane open ring tacrolimus including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C44H71NO13Degré de pureté :Min. 95%Masse moléculaire :822.04 g/molRoflumilast Impurity A
CAS :Roflumilast impurity A is a metabolite of roflumilast. It is a drug product that is used as an analytical standard for the determination of roflumilast in HPLC analysis. Roflumilast impurity A is not natural and is synthetic. It has been shown to be a substrate for CYP1A2, CYP2C8, CYP2C9, and CYP3A4 enzymes. Studies have shown that it may be involved in the metabolism of roflumilast through hydroxylation and deamination.
Formule :C16H14Cl2N2O3Degré de pureté :Min. 95%Masse moléculaire :353.2 g/molRef: 3D-IR168438
Produit arrêtéTofacitinib dihydro impurity
CAS :Tofacitinib dihydro impurity is a research and development impurity standard for the synthesis of Tofacitinib. It is a custom synthesis with high purity, pharmacopoeia grade, and synthetic. This product is also used in drug development for metabolism studies and analytical applications.
Formule :C16H22N6ODegré de pureté :Min. 95%Masse moléculaire :314.39 g/molRef: 3D-QQC97235
Produit arrêtéCiprofloxacin ep impurity C
CAS :Ciprofloxacin ep impurity C is a synthetic compound. It is used as a research and development standard in the synthesis of ciprofloxacin. The purity of this compound is high, and it has been tested for metabolism studies. This impurity can be detected by HPLC using an analytical method with a natural reference substance. This impurity has not been evaluated for pharmacopoeia or CAS number.
Formule :C15H16FN3O3Degré de pureté :Min. 95%Masse moléculaire :305.30 g/molN-Benzyl albuterol
CAS :N-Benzyl albuterol is a drug product that is custom synthesized to be of high purity with an analytical standard. It is used in research and development, pharmaceutical development, and as a pharmacopoeia or analytical standard. N-Benzyl albuterol has been found to be a metabolite of the drug product Albuterol Sulfate. It is also used in metabolism studies and natural product research. The CAS number for this compound is 24085-03-8.
Formule :C20H27NO3Degré de pureté :Min. 95%Masse moléculaire :329.4 g/molIvermectin impurity I
CAS :Ivermectin impurity I is an analytical standard that is used for pharmacopoeia and custom synthesis. It is a natural metabolite of the drug Ivermectin, which has been shown to have anti-inflammatory properties in mice. Ivermectin impurity I binds to nicotinic acetylcholine receptors, leading to muscle paralysis and death. This compound is found in high purity for research and development purposes.
Formule :C48H74O14Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :875.09 g/mol3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride
CAS :3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride is a versatile compound with various characteristics and applications. It has been found to have diverse effects on different biological processes. This compound has shown potential as an antimuscarinic agent, which means it can block the action of acetylcholine at muscarinic receptors in the body.
Formule :C19H25ClN2O2Degré de pureté :Min. 95%Masse moléculaire :348.9 g/molN-Nitroso dorzolamide
N-Nitroso dorzolamide is a chemical compound used as an intermediate in the synthesis of dorzolamide, a carbonic anhydrase inhibitor used in the treatment of glaucoma and ocular hypertension.
Formule :C10H15N3O5S3Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :353.44 g/molPiperacilloic acid
CAS :Piperacilloic acid is a synthetic compound that exhibits antibacterial activity. It has been shown to be effective against human pathogens, including urothelial carcinoma and human serum. Piperacilloic acid binds to the amino acids lysine and arginine in bacterial proteins and inhibits protein synthesis by inhibiting the function of enzymes that require these amino acids for their activity. The potency of piperacillin is low, but it is activated by hydrolysis in the acidic environment of the stomach or intestinal tract. Piperacilloic acid also has potential as a contraceptive agent because it may inhibit transcriptional regulation of genes that are involved in sperm production.
Formule :C23H29N5O8SDegré de pureté :(Elemental Analysis) Min. 90 Area-%Couleur et forme :PowderMasse moléculaire :535.57 g/molRef: 3D-FP27061
Produit arrêtéEmpagliflozin S-furanose
CAS :Empagliflozin S-furanose is a Custom synthesis drug product. It is an analytical standard with CAS No. 1620758-32-8, and it is used in research and development of new drugs. Empagliflozin S-furanose has been found to be a metabolite of empagliflozin, a drug that is used to treat type 2 diabetes mellitus. It is also used as an impurity standard for HPLC analysis of empagliflozin because it does not have any biological activity.
Formule :C23H27ClO7Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :450.91 g/mol(3S,4R)-Tofacitinib
CAS :(3S,4R)-Tofacitinib is a rhombic and paramagnetic compound with a Curie point of approximately 10.6°C. It is soluble in nonpolar solvents such as benzene and toluene. (3S,4R)-Tofacitinib has been shown to have magnetic properties that are dependent on the temperature and the frequency of the applied magnetic field. The paramagnetic resonance spectra were observed at 18°C and 32°C, while the paramagnetic resonance spectrum was observed at -2°C. The octahedral interactions are likely due to the presence of six different types of iron ions in the crystal structure.
Formule :C16H20N6ODegré de pureté :Min. 95%Masse moléculaire :312.37 g/molRef: 3D-STB57848
Produit arrêtéDesfluoro ezetimibe
CAS :Desfluoro ezetimibe is a synthetic cholesterol-lowering drug that inhibits intestinal cholesterol absorption. It is chemically synthesized, and the process includes the introduction of fluorine at the 3-position of the C-ring. Desfluoro ezetimibe is not metabolized in humans, but it may be subject to oxidative degradation. The product is also subject to oxidation by light and air, which may result in formation of impurities. The drug substance has been validated as well as its isomers and efficiencies in mass spectrometry detection.
Formule :C24H22FNO3Degré de pureté :Min. 95%Couleur et forme :White To Off-White SolidMasse moléculaire :391.43 g/molRef: 3D-FD21193
Produit arrêtéPramipexole EP Impurity C
CAS :Pramipexole EP Impurity C is a synthetic impurity that is used as an impurity standard in the manufacture of Pramipexole EP. It is also used as a research and development tool for drug product, custom synthesis, CAS No. 1973461-14-1, and analytical studies. This compound has been shown to be a metabolite of Pramipexole EP and may have pharmacological properties. Pramipexole EP Impurity C has been found to inhibit the growth of certain bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA) isolates.
Formule :C20H32N6S2Degré de pureté :Min. 95%Ref: 3D-FP165425
Produit arrêtéRocuronium Bromide EP Impurity F Bromide
CAS :Rocuronium Bromide EP Impurity F Bromide is an impurity found in Rocuronium Bromide EP. It is a natural component of the drug product, which is a synthetic drug. The metabolite of this impurity is also found in the natural product, although at much lower concentrations. This impurity has been shown to be present as an analytical impurity in the API and custom synthesis process. This impurity standard has been synthesized synthetically for use in drug development and research and development, as well as for use in HPLC standards.Formule :C34H55N2O4·BrDegré de pureté :Min. 95%Masse moléculaire :635.72 g/molRef: 3D-IR178405
Produit arrêtéD-6-Cyano-6-norlysergic acid methyl ester
CAS :Please enquire for more information about D-6-Cyano-6-norlysergic acid methyl ester including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C17H15N3O2Degré de pureté :Min. 95%Masse moléculaire :293.32 g/molTriethylene glycol flufenamate
CAS :Etofenamate impurity
Formule :C20H22F3NO5Degré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :413.39 g/molChlorthalidone impurity E
CAS :Chlorthalidone impurity E is an analytical standard for the HPLC analysis of chlorthalidone in pharmaceutical drug products and is a metabolite of chlorthalidone. Chlorthalidone impurity E is an API impurity that can be found in the synthesis of chlorthalidone, and it has been detected as a minor component in certain drug products. It is important to have an accurate specification for this compound, since it can affect the pharmacological properties of the drug product. The purity level of this compound must be at least 98% or greater to ensure that there are no contaminants present. This compound is also a metabolite of chlorthalidone and is used as a pharmacopoeia reference substance for testing equipment calibration.END>
Formule :C14H11ClN2O3SDegré de pureté :Min. 95%Masse moléculaire :322.77 g/molAtorvastatin calcium trihydrate EP Impurity G
CAS :Atorvastatin is a drug that belongs to the class of statins. It is used for the treatment of high cholesterol levels and other related diseases, such as cardiovascular disease. Atorvastatin calcium trihydrate EP Impurity G is an impurity that may be present in atorvastatin calcium trihydrate. This compound has not been found to have any pharmacological activity.
Formule :C34H37FN2O5Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :572.67 g/molRef: 3D-IA182820
Produit arrêtéGS 441524 triphosphate
CAS :Triphosphorylated form of an antiviral nucleoside analog with activity against zoonotic feline infectious peritonitis virus (FIPV) and severe acute respiratory syndrome (SARS) virus from Coronaviridae family. The compound is the biologically active form of the GS 441524 prodrug and being triphosphorylated, it competes with natural nucleoside triphosphates in cells and interferes with viral RNA synthesis. Made to order.
Formule :C12H12N5O13P3·4NaDegré de pureté :(31P-Nmr) Min. 95 Area-%Couleur et forme :White PowderMasse moléculaire :531.20 g/mol
