Molybdenum(VI) dichloride dioxide
CAS: 13637-68-8
Rif. 3D-FM34457
| 1g | Prezzo su richiesta | ||
| 2g | Prezzo su richiesta | ||
| 5g | Prezzo su richiesta | ||
| 10g | Prezzo su richiesta | ||
| 500mg | Prezzo su richiesta |
Informazioni sul prodotto
- Dichlorodioxomolybdenum
- Dichlorodioxomolybdenum(VI)
- Dioxomolybdenum Dihydrochloride
- Molybdenum chloride (MoO<sub>2</sub>Cl<sub>2</sub>)
- Molybdenum chloride oxide (MoCl<sub>2</sub>O<sub>2</sub>)
- Molybdenum chloride oxide (MoCl<sub>2</sub>O<sub>2</sub>), (T-4)-
- Molybdenum chloride oxide (MoO<sub>2</sub>Cl<sub>2</sub>)
- Molybdenum dichloride dioxide
- Molybdenum dioxide dichloride
- Molybdenum dioxodichloride
- Vedi altri sinonimi
- Molybdenum dioxychloride
- Molybdenum oxychloride (MoO<sub>2</sub>Cl<sub>2</sub>)
- Molybdyl chloride
Molybdenum(VI) dichloride dioxide is a catalyst that is used in the production of epoxides. It is an efficient method for the conversion of hydrogen chloride to chlorine gas. Molybdenum dichloride dioxide can be prepared by reacting molybdenum with hydrogen chloride and an acid catalyst, such as hydrochloric acid or sulfuric acid. The reaction takes place at a temperature between -20 °C and 20 °C. Molybdenum dichloride dioxide can also be prepared by reacting molybdenum with chlorine gas at a temperature below 0 °C. This compound has been used as a catalyst in the production of ethyl diazoacetate from ethyl acetoacetate and dimethylformamide (DMF). Ethyl diazoacetate is a precursor to diisocyanates, which are used in the manufacture of polyurethanes.
Proprietà chimiche
Richiesta tecnica su: 3D-FM34457 Molybdenum(VI) dichloride dioxide
Se si desidera richiedere un preventivo o effettuare un ordine, si prega invece di aggiungere i prodotti desiderati al carrello e poi richiedere un preventivo o un ordine dal carrello. È più veloce, più economico, e potrà beneficiare degli sconti disponibili e di altri vantaggi.
