Elastómeros

2-Part 10:1 Kit
100 g SpeedMixer™ Kit – contains100 g part A (base), 10 g part B (cross-linker) in FlackTek SpeedMixer™ cups 220 g kit – contains 200 g part A (base), 20 g part B (cross-linker)1.1 kg kit – contains 1000 g part A (base), 100 g part B (cross-linker)
Gelest®RG 05: 2-Part RTV Silicone Elastomer
PP2-RG05 is a flexible, clear, high definition molding and encapsulation PDMS with lower volatile content and greater dimensional stability than standard PDMS (PP2-RG01), which reduces the rate of hydrophobic recovery. These properties provide improved performance in microelectronics, microfluidics, and medical applications.
Cured PDMS Properties
Tensile Strength: 5.5-7.0 MPaElongation: 80-100%Durometer, Shore A: 45-60Volatiles (4hrs/150°C): <0.2 wt%

2-Part 100:1 Kit
202 g kit – contains 200 g part A (base), 2 g part B (cross-linker)1.01 kg kit – contains 1000 g part A (base), 10 g part B (cross-linker)
Gelest® ExSil® 100: 2-Part Silicone Elastomer
ExSil® 100 (EM2-EX100) is a two component high elongation silicone elastomer developed for molding applications. ExSil® 100 applications include molding, vibration damping, microfluidics, and high performance seals.
Cured ExSil® 100 Properties
Tensile Strength: 8.0-9.0 MPaElongation @ Break: 5,000%Durometer, Shore A: 10-15Tear Strength: 42 kN/mElongation @ Tear Failure: 2,000%Volatiles (4 hrs/150 °C): <0.1 wt%

2-Part 100:1 Kit
202 g kit – contains 200 g part A (base), 2 g part B (cross-linker)1.01 kg kit – contains 1000 g part A (base), 10 g part B (cross-linker)
Gelest® ExSil® 50: 2-Part Silicone Elastomer
ExSil® 50 (EM2-EX050) is a two component high elongation silicone elastomer developed for medical applications, specifically matching the properties of soft tissue.
Cured ExSil® 50 Properties
Tensile Strength: 3 MPaElongation @ Break: 6,000%Durometer, Shore A: 5Tear Strength: 5-7 kN/mElongation @ Tear Failure: 1,000-1,500%Volatiles (4 hrs/150 °C): <0.1 wt%

2-Part 1:1 Kit
200 g kit – contains 100 g part A (base), 100 g part B (cross-linker)
Gelest® OE39: 1.39 Refractive Index 2-Part Silicone Elastomer
Gelest OE39 is an optically clear, cladding, encapsulation, and coating compound with a RI of 1.39. This RTV kit can also be used to fabricate acoustic lenses. The moderate viscosity of the platinum catalyzed mix, long pot-life at room temperature, and moderate cure temperature make this extremely useful in laboratory, prototype, and small scale production run applications.
Cured Gelest® OE39 Properties
Refractive Index (25°C): 1.39Tensile Strength: 0.05 MPaElongation @ Break: 1,400-1,600%Durometer, Shore A: 5