Padrões físico-químicos

<p>Reagecon's Bromothymol Blue R3 Solution is a high quality Indicator Solution produced from the highest quality raw materials and manufactured and tested under rigorous conditions. For manual titrations; indicator titrant or analyte change colour and this colour change is by far the most important method of end point detection, in such titrations. A high quality indicator solution such as Reagecon's facilitates end point detection, in a clear and unambiguous manner and is an imperative for accurate manual titrimetry.</p>

<p>Reagecon's Phloroglucinol TS Solution according to United States Pharmacopoeia (USP) is specified for use in individual United States Pharmacopoeia (USP) Monographs. It is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03); is NIST traceable and has guaranteed stability throughout its entire shelf life; even after opening the bottle.</p>

<p>Pricing displayed is Nett. For order quantities above 4 units, ask your sales contact for a quotation.<br><br><br>Reagecon's Multi Element Standard for ICP; ICP-MS in 2-5%Nitric Acid (HNO₃) and 0.04% Hydrofluoric Acid (HF) is manufactured from ultra-pure metals or salts. This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 (A2LA Ref: 6739.02) accreditation for calibration of laboratory balances.<br>- GHS/OSHA compliant, REACH<br>- This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.<br><br>Description | Concentration:<br>- Arsenic (As): 100 µg/mL (ppm).<br>- Barium (Ba): 100 µg/mL (ppm).<br>- Cadmium (Cd): 100 µg/mL (ppm).<br>- Cobalt (Co): 100 µg/mL (ppm).<br>- Chromium (Cr): 100 µg/mL (ppm).<br>- Copper (Cu): 100 µg/mL (ppm).<br>- Manganese (Mn): 100 µg/mL (ppm).<br>- Molybdenum (Mo): 100 µg/mL (ppm).<br>- Nickel (Ni): 100 µg/mL (ppm).<br>- Lead (Pb): 100 µg/mL (ppm).<br>- Antimony (Sb): 100 µg/mL (ppm).<br>- Selenium (Se): 100 µg/mL (ppm).<br>- Tin (Sn): 100 µg/mL (ppm).<br>- Strontium (Sr): 100 µg/mL (ppm).<br>- Titanium (Ti): 100 µg/mL (ppm).<br>- Thallium (Tl): 100 µg/mL (ppm).<br>- Vanadium (V): 100 µg/mL (ppm).<br>- Zinc (Zn): 100 µg/mL (ppm).<br></p>

<p>Reagecon's pH 6.86 at 25°C Equimolal Phosphate 0.05M according to United States Pharmacopoeia (USP) is specified for use in individual United States Pharmacopoeia (USP) Monographs. It is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03); is NIST traceable and has guaranteed stability throughout its entire shelf life; even after opening the bottle.</p>

<p>Pricing displayed is Nett. For order quantities above 4 units, ask your sales contact for a quotation.<br><br><br>Reagecon's Multi Element Standard for ICP; ICP-MS in 2-5% Nitric Acid (HNO₃) and trace Hydrofluoric Acid (HF) is manufactured from ultra-pure metals or salts. This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 (A2LA Ref: 6739.02) accreditation for calibration of laboratory balances.<br>- GHS/OSHA compliant, REACH<br>- This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.<br><br>Description | Concentration:<br>- Aluminium (Al): 100 µg/mL (ppm).<br>- Antimony (Sb): 100 µg/mL (ppm).<br>- Arsenic (As): 100 µg/mL (ppm).<br>- Barium (Ba): 100 µg/mL (ppm).<br>- Bismuth (Bi): 100 µg/mL (ppm).<br>- Boron (B): 100 µg/mL (ppm).<br>- Cadmium (Cd): 100 µg/mL (ppm).<br>- Calcium (Ca): 100 µg/mL (ppm).<br>- Chromium (Cr): 100 µg/mL (ppm).<br>- Cobalt (Co): 100 µg/mL (ppm).<br>- Copper (Cu): 100 µg/mL (ppm).<br>- Gallium (Ga): 100 µg/mL (ppm).<br>- Hafnium (Hf): 100 µg/mL (ppm).<br>- Indium (In): 100 µg/mL (ppm).<br>- Iron (Fe): 100 µg/mL (ppm).<br>- Lead (Pb): 100 µg/mL (ppm).<br>- Lithium (Li): 100 µg/mL (ppm).<br>- Magnesium (Mg): 100 µg/mL (ppm).<br>- Manganese (Mn): 100 µg/mL (ppm).<br>- Molybdenum (Mo): 100 µg/mL (ppm).<br>- Nickel (Ni): 100 µg/mL (ppm).<br>- Potassium (K): 100 µg/mL (ppm).<br>- Silver (Ag): 100 µg/mL (ppm).<br>- Sodium (Na): 100 µg/mL (ppm).<br>- Strontium (Sr): 100 µg/mL (ppm).<br>- Thallium (Tl): 100 µg/mL (ppm).<br>- Titanium (Ti): 100 µg/mL (ppm).<br>- Tungsten (W): 100 µg/mL (ppm).<br>- Zinc (Zn): 100 µg/mL (ppm).<br></p>

<p>Reagecon Sodium Sulphide Solution is a high purity stable product developed and tested for European Pharmacopoeia (EP) applications.  These include the preparation of other reagents (4.1.1), use in identification reactions of ions and functional groups (2.3.1) and used as a reagent in the performance of tests outlined in several EP monographs.<br>- NIST traceable<br>- This Reagecon EP reagent is accurate, stable and reproducible. Stability is proven (either opened or unopened) for the shelf life of this product.<br></p>

<p>Reagecon's Zirconium Standard for ICP; ICP-MS 100 µg/mL (100 ppm) in 1% Hydrofluoric Acid (HF) and 5% Nitric Acid (HNO₃) for ICP or ICP-MS is manufactured from ultra-pure metal (99.999%). This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. To a specification of ± 0.2%. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances.<br>- GHS/OSHA compliant, REACH<br>- This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.<br></p>

<p>Reagecon's Zirconium Standard for ICP; ICP-MS 1000 µg/mL (1000 ppm) in 1% Hydrofluoric Acid (HF) and 5% Nitric Acid (HNO₃) for ICP or ICP-MS is manufactured from ultra-pure metal (99.999%). This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. To a specification of ± 0.2%. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances.<br>- GHS/OSHA compliant, REACH<br>- This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.<br></p>

<p>Reagecon's 1.0 mg/L C from NIST Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product<br>- This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.<br></p>