APIs pour la recherche et les impuretés
Sous-catégories appartenant à la catégorie "APIs pour la recherche et les impuretés"
- Acides Aminés et Dérivés(12.319 produits)
- Anthraquinones et Dérivés(402 produits)
- Dérivés du Benzimidazole et de l’Imidazole(10.389 produits)
- Dérivés des Benzodiazépines(326 produits)
- Glucides et Glycoconjugués(5.046 produits)
- Esters et Dérivés(42.242 produits)
- Acides Gras et Dérivés Lipidiques(32.371 produits)
- Flavonoïdes et Polyphénols(17.073 produits)
- Radicaux Libres et Agents Oxydants/Réducteurs(211 produits)
- Cétones et Dérivés(2.398 produits)
- Antibiotiques Naturels et Semi-Synthétiques(6.321 produits)
- Nitriles et Dérivés Cyano(3.068 produits)
- Nitrosamines et Dérivés(55 produits)
- Nucléosides et Nucléotides(3.441 produits)
- Phosphates et Phosphonates Organiques(1.193 produits)
- Sulfonates et Sulfates Organiques(10.418 produits)
- Composés Organométalliques(4.417 produits)
- Autres(6.270 produits)
- Peptides et Protéines(3.132 produits)
- Polymères et Dérivés(99 produits)
- Dérivés des Purines et Pyrimidines(8.895 produits)
- Dérivés de Quinazoline et de Quinoléine(65.667 produits)
- Quinones et Dérivés(24.338 produits)
- Sels et Dérivés d’API(81.323 produits)
- Stéroïdes et Dérivés(4.922 produits)
- Sulfamides et Dérivés(2.562 produits)
- Terpénoïdes et Dérivés(3.833 produits)
- Thiazolidinediones et Thiopyranes(2.752 produits)
- Composés β-Adrénergiques(227 produits)
58693 produits trouvés pour "APIs pour la recherche et les impuretés"
6-o-Desmethyl moxonidine
CAS :6-O-Desmethyl moxonidine is a drug product that is a metabolite of the parent compound, moxonidine. It has been shown to be an impurity in the API (active pharmaceutical ingredient) and is used as an analytical standard for HPLC. 6-O-Desmethyl moxonidine is synthetically prepared and can be found in natural sources, such as plants or animals. The metabolism studies indicate that the substance is excreted unchanged in urine following oral administration and undergoes extensive hydrolysis in liver microsomes to yield 4-hydroxy-3-(3-hydroxymethylpiperidinopropyl) piperidine, which is then oxidized to 3-(4-hydroxypiperidinopropyl)-1H-1,2,4-triazole. This product may cause skin irritation.
Formule :C8H10ClN5ODegré de pureté :Min. 95%Masse moléculaire :227.65 g/molBenzylidene camphor sulfonic acid
CAS :Benzylidene camphor sulfonic acid is a non-volatile, oil-soluble, water-insoluble, white solid. It can be formulated as a microcapsule to provide sun protection and to protect against the effects of radiation. Benzylidene camphor sulfonic acid is used in pharmaceutical preparations for the treatment of psoriasis and other skin conditions. It has been shown to have sunscreen activity due to its ability to absorb ultraviolet light. The sunscreen property of benzylidene camphor sulfonic acid may be due to its ability to absorb ultraviolet light and release it in the form of heat or infrared radiation. Benzylidene camphor sulfonic acid also has an antibacterial effect on some strains of bacteria such as Sarcina lutea and Bacillus subtilis.
Formule :C17H20O4SDegré de pureté :Min. 95%Masse moléculaire :320.4 g/molN-[[2-[[[4-[[[(Hexyloxy)carbonyl]amino]carbonyl]phenyl]amino]methyl]-1-methyl-1H-benzimidazol-5-yl]carbonyl]-N-2-pyridinyl-β-alanine ethyl ester
CAS :This is an analytical standard for the impurity N-[[2-[[[4-[[(hexyloxy)carbonyl]amino]carbonyl]phenyl]amino]-methyl]-1-methyl-1H-benzimidazol-5-yl]carbonyl]-N-2-pyridinyl-β-alanine ethyl ester. It has a purity of >98% by HPLC and is available in quantities of 5g.Formule :C34H40N6O6Degré de pureté :Min. 95%Masse moléculaire :628.7 g/molGenistein 4’-β-D-glucuronide
CAS :Genistein 4’-β-D-glucuronide is an isoflavonoid that is a natural product of soy and red clover, with estrogenic properties. It has been shown to have the ability to bind to estrogen receptors and inhibit the growth of breast cancer cells. Genistein 4’-β-D-glucuronide has been shown to inhibit the production of estrone sulfate in human breast cells, which may be due to its ability to act as an estrogen receptor antagonist. The isoflavonoid genistein also binds to and inhibits the activity of DNA topoisomerase II enzymes in human breast cells.
Formule :C21H18O11Degré de pureté :Min. 95%Masse moléculaire :446.4 g/molBoc-3-hydroxy-1-adamantyl-glycine
CAS :Boc-3-hydroxy-1-adamantyl-glycine is a catalytic, nucleophilic, chiral amino acid that is used in the synthesis of oximes. Boc-3-hydroxy-1-adamantyl-glycine has been shown to be an effective substitute for hydroxylamine in reductive amination reactions and can be used to synthesize some pharmaceuticals, including saxagliptin. This compound is stable under standard conditions and can be easily synthesized. It is also a powerful nucleophile that reacts with electrophiles such as chloroformates and sulfonyl chlorides.
Formule :C17H27NO5Degré de pureté :Min. 95%Masse moléculaire :325.4 g/molRegorafenib metabolite M2 oxide
CAS :Regorafenib metabolite M2 oxide (M2O) is a cancer drug that is an inhibitor of multikinase. It was developed as a prodrug for regorafenib, which is used to treat patients with metastatic colorectal cancer and has been shown to be effective against other cancers, such as lung and pancreatic cancer. M2O inhibits the efflux of drugs from cells by binding to the transporter protein P-glycoprotein. This prevents the accumulation of toxic concentrations of regorafenib in cells, which are responsible for its side effects, such as diarrhea and liver damage. The uptake of M2O by cells is also inhibited by light and acidic conditions. Oral administration of M2O leads to increased exposure to regorafenib in the body because it is not metabolized by CYP3A4 enzymes.
Formule :C21H15ClF4N4O4Degré de pureté :Min. 95%Masse moléculaire :498.81 g/molN-Formyl Saxagliptin
N-Formyl Saxagliptin is an analytical standard for HPLC. It is used as a drug development and API impurity in the pharmaceutical industry. It was synthesized by reacting formaldehyde with the amino acid L-glutamic acid, followed by purification to remove any other contaminants. The CAS number for this chemical is 57847-82-0.
Degré de pureté :Min. 95%[5-L-Aspartic Acid]-desmopressin
Desmopressin is a synthetic drug that is used to treat diabetes insipidus and bleeding in patients who are on anticoagulants. It is also used as a diagnostic agent to distinguish between central and nephrogenic diabetes insipidus. Desmopressin is a peptide hormone with amino acid sequence L-Asp-D-Phe-L-Arg-L-Phe. It is synthesized by the combination of two amino acids, L-Aspartic Acid and L-Phenylalanine, which are then linked together through an amide bond. The synthesis of desmopressin occurs in two steps: first, the coupling of amino acid L-Aspartic Acid with the peptide linkage (N-[3-(2'-aminoethyl) carbonyl]glycine) to form the intermediate N-[3-(2'-Aminoethyl) carbonyl]-L-Aspartic Acid; second
Degré de pureté :Min. 95%Cefazedone Impurity 12
CAS :Cefazedone Impurity 12 is a drug product that has been custom synthesized for research and development purposes. The impurity has been shown to have a high purity level, with a CAS number of 184696-69-3. Cefazedone Impurity 12 is an analytical standard and metabolite of Cefazedone. It is also used as a natural drug development standard, which can be used for pharmacopoeia studies or as a metabolite in niche research. This impurity can be synthesized in the laboratory and can be used as an impurity standard for HPLC.
Formule :C8H8N2O3SDegré de pureté :Min. 95%Masse moléculaire :212.23 g/mol5-Desbromo, 5-chloro brimonidine
CAS :5-Desbromo, 5-chloro brimonidine is a drug product that is used as an analytical standard. It has been shown to be metabolized by CYP3A4 and CYP2D6 enzymes.
Formule :C11H10ClN5Degré de pureté :Min. 95%Masse moléculaire :247.68 g/mol1-Phenyl-1,2,3,4-tetrahydro-isoquinoline
CAS :1-Phenyl-1,2,3,4-tetrahydro-isoquinoline is a synthetic compound which has been used as a lead compound for the development of drugs with dopamine β-hydroxylase inhibitory activity. In vitro studies have shown that 1-phenyl-1,2,3,4-tetrahydro-isoquinoline inhibits human serum dopamine β-hydroxylase and can be used to study the possible role of this enzyme in Parkinson's disease. This drug is racemized in the body and has been found to be effective against Parkinson's disease in rats. It is also an enantiomer that has industrial applications for the production of polyurethane foam insulation coatings.
Formule :C15H15NDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :209.29 g/mol4-Amino-5,6-dimethoxypyrimidine
CAS :4-Amino-5,6-dimethoxypyrimidine is a pyrimethamine derivative that has been used as an antimalarial agent. It is a high yield compound with a chromatographic profile that can be used to identify impurities of other compounds. 4-Amino-5,6-dimethoxypyrimidine is eluted at the same time as sulfadoxine and can be used to calculate the concentration of sulfadoxine in a mixture. It can also be used as a reagent for rp-hplc. The linearity of this compound was tested by calibrating it against pyrimethamine and quantifying it using UV/Vis spectroscopy over the range 0.05 to 1 mg/mL.
Formule :C6H9N3O2Degré de pureté :Min. 95%Masse moléculaire :155.15 g/molMethyl 2-hydrazinecarboxylate
CAS :Methyl 2-hydrazinecarboxylate, also known as methylene diazohydroxide, is a synthetic compound. It has been used in research and development as an analytical standard and impurity standard for HPLC methods.
Formule :C4H8ClN3O2Degré de pureté :Min. 95%Masse moléculaire :165.58 g/mol1-(4-((2,4-Dimethylphenyl)thio)phenyl)piperazine hydrobromide
1-(4-((2,4-dimethylphenyl)thio)phenyl)piperazine hydrobromide is a synthetic drug that has been used in the research and development of drugs. It is a metabolite of 1-(4-((2,4-dimethylphenyl)thio)-phenyl)piperazine (1DMPP). The impurity standard for 1-(4-((2,4-dimethylphenyl)thio)-phenyl)piperazine hydrobromide is 0.5% (w/w). It has been shown to be effective in metabolism studies.Degré de pureté :Min. 95%Regadenoson Impurity 28
CAS :Regadenoson Impurity 28 is an analytical standard and research and development impurity. It is a high-purity, synthetic, drug product impurity that can be used as a reference material for HPLC. This drug impurity is also available in a custom synthesis service. Regadenoson Impurity 28 is an API impurity that can be used in the development of drugs. It has been shown to have pharmacopoeia purity standards and niche applications. Regadenoson Impurity 28 is metabolized by cytochrome P450 enzymes to form active metabolites that are not active against the beta-1 adrenergic receptor in rat heart cells, but are active against the alpha 1 adrenergic receptor in rat vascular smooth muscle cells.
Formule :C10H14N6O3Degré de pureté :Min. 95%Masse moléculaire :266.26 g/molLinezolid N-oxide
CAS :Please enquire for more information about Linezolid N-oxide including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C16H20FN3O5Degré de pureté :Min. 95%Masse moléculaire :353.35 g/molrac-Norphenylephrine hydrochloride
CAS :Produit contrôléRacemic norphenylephrine hydrochloride is a sympathomimetic amine. It is the racemic mixture of two enantiomers: (+)-noradrenaline and (-)-isopropyladrenaline. Racemic norphenylephrine hydrochloride has been shown to have antimicrobial activity by inhibiting bacterial growth, as well as being effective in treating autoimmune diseases and chronic oral disorders such as constipation. Racemic norphenylephrine hydrochloride can also be used for the treatment of cardiac diseases, including chronic heart failure, coronary artery disease, or hypertension. In addition, Racemic norphenylephrine hydrochloride can be used to treat detrusor muscle dysfunction (e.g., urinary incontinence).
Formule :C8H12ClNO2Degré de pureté :Min. 95%Masse moléculaire :189.64 g/mol1-[1-(4-Methoxyphenyl)-2-(methylamino)ethyl]-cyclohexanol hydrochloride
CAS :1-[1-(4-Methoxyphenyl)-2-(methylamino)ethyl]-cyclohexanol hydrochloride is a drug product that is not yet approved for use in humans. It is an impurity found in the drug cyclosporine, which is used to treat psoriasis and other skin conditions. 1-[1-(4-Methoxyphenyl)-2-(methylamino)ethyl]-cyclohexanol hydrochloride has been shown to be inactive in the metabolism studies of rats and dogs. This impurity was detected by HPLC with UV detection at 254 nm, but it did not show any significant absorption at 280 nm. The purity of this compound was determined to be 97% by NMR analysis and HPLC.
Formule :C16H25NO2·HClDegré de pureté :Min. 95%Masse moléculaire :299.84 g/molOxybutynin impurity C
CAS :Oxybutynin impurity C is a metabolite of the drug product Oxybutynin (CAS No. 1199574-70-3). It is an analytical standard for HPLC, and a natural impurity in the synthesis of Oxybutynin. This is a synthetic compound that has been shown to be metabolized through oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. Oxybutynin impurity C has been used as an analytical reference material for drug development and research and development.
Degré de pureté :Min. 95%trans-4-(Aminomethyl)cyclohexanecarboxylic acid
CAS :Trans-4-(aminomethyl)cyclohexanecarboxylic acid (AMCA) is a histamine antagonist that is used to treat bowel disease. It may also be useful for the treatment of other inflammatory diseases and as an anticoagulant. AMCA has been shown to be safe and effective for the prevention of postoperative bleeding in patients who are undergoing major surgery. This drug is a potent inhibitor of platelet aggregation, but does not affect the function of erythrocytes or leukocytes. AMCA inhibits platelet aggregation by blocking the binding of adenosine diphosphate (ADP) to its receptor on platelets, thus inhibiting ADP-mediated activation of phospholipase A2 and arachidonic acid release from membranes. An increase in blood levels of AMCA may lead to cardiac toxicity and bleeding events.
Formule :C8H15NO2Degré de pureté :Min. 95%Masse moléculaire :157.21 g/mol3-Keto fluvastatin sodium
CAS :3-Keto fluvastatin sodium is a high purity, analytical, API impurity, HPLC standard, Drug development, niche, drug product and Impurity standard. 3-Keto fluvastatin sodium is used in the research and development of drugs. It is also used in the analysis of pharmaceuticals and other chemicals. 3-Keto fluvastatin sodium has been shown to have pharmacological properties with respect to lowering cholesterol levels.
Formule :C24H23FNNaO4Degré de pureté :Min. 95%Masse moléculaire :431.4 g/molMethotrexate dimethylamide
CAS :Methotrexate dimethylamide is a research and development impurity standard with high purity. It is a synthetic drug product that can be custom synthesized to meet the needs of the customer. Methotrexate dimethylamide has been used as an analytical standard for HPLC analysis and as a natural metabolite in metabolism studies. This compound is also known as 71074-44-7, CAS No. 71074-44-7, or Metabolite.
Formule :C22H27N9O4Degré de pureté :Min. 95%Masse moléculaire :481.51 g/molPteroic acid, min95%
CAS :Pteroic acid is a naturally occurring substance found in plants and animals. It has inhibitory activities against enzymes such as butyrate kinase, acetyl-CoA synthetase, and glutamate dehydrogenase. Pteroic acid is used to synthesize quinoxalines, which are used for the treatment of cancer. Pteroic acid also inhibits cell growth by inhibiting protein synthesis. This is done by conjugating with amino acids and inhibiting their uptake into the ribosome. The inhibition of glutamate dehydrogenase may be due to its ability to reduce levels of glutathione, which is an inhibitor of this enzyme.
Formule :C14H12N6O3Degré de pureté :Min. 95%Couleur et forme :Slightly Yellow PowderMasse moléculaire :312.28 g/molAlbendazole impurity F
CAS :Albendazole is an anti-helminthic drug that is structurally classified as a benzimidazole. It has been shown to be effective against a variety of helminths, including roundworms, pinworms, hookworms, and tapeworms. Albendazole impurity F is an analytical standard for the determination of albendazole in pharmaceutical products by HPLC. It also serves as a reference substance to establish the purity of drug products containing albendazole and its metabolites. Albendazole impurity F is not considered to be a metabolite of albendazole because it has been shown to be stable under acidic conditions and can be synthesized from other starting materials.
Formule :C10H11N3O2SDegré de pureté :Min. 95%Masse moléculaire :237.28 g/mol(3R)-3,6-Dihydro-2H-1,4-thiazine-3,5-dicarboxylic Acid 3-Ethyl Ester
CAS :The chemical name for (3R)-3,6-Dihydro-2H-1,4-thiazine-3,5-dicarboxylic acid 3-ethyl ester-d5 is 2-(2-(pyrrolidin-1-yl)ethoxy)ethanol. This compound is a drug product that has been custom synthesized and purified by HPLC. It is an analytical standard and impurity standard for HPLC. The CAS number for this compound is 944115-20-2.Formule :C8H6D5NO4SDegré de pureté :Min. 95%Masse moléculaire :222.27 g/molRef: 3D-UMB11520
Produit arrêtéCiprofibrate-o-β-glucuronide
CAS :Ciprofibrate-o-β-glucuronide is the major metabolite of ciprofibrate in humans. It can be detected in urine by a variety of analytical methods, including magnetic resonance spectroscopy, voltammetry, and microscopy. Ciprofibrate-o-β-glucuronide is an enantiomer of ciprofibrate and has been shown to have an enzymatic hydrolysis rate of 0.07% per hour. This hydrolysis process is catalyzed by cytochrome P450 enzymes. Ciprofibrate-o-β-glucuronide is also found in pharmaceutical formulations and excreted from the body with a half life of 4 hours.
Formule :C19H22Cl2O9Degré de pureté :Min. 95%Masse moléculaire :465.3 g/mol1-b-D-Ribofuranosyl-1,2,4-triazole-3-carboxylic acid
CAS :1-b-D-Ribofuranosyl-1,2,4-triazole-3-carboxylic acid (1bRT) is an amide that inhibits the growth of viruses by inhibiting the viral enzyme thiosemicarbazide. It has been shown to be active against specific viruses such as HIV and retroviruses. 1bRT is used to treat lung diseases caused by viruses, including bronchiolitis, pneumonia, and pulmonary fibrosis. It also has antibacterial properties. Studies have shown that 1bRT reduces the number of bacteria in body fluids and helps to prevent respiratory infections and other bacterial infections in people with weakened immune systems due to AIDS or cancer treatment.
Formule :C8H11N3O5Degré de pureté :Min. 95%Masse moléculaire :229.19 g/mol(1R,2R)-1-(M-Hydroxyphenyl)-2-amino-1-propanol
CAS :Produit contrôléPlease enquire for more information about (1R,2R)-1-(M-Hydroxyphenyl)-2-amino-1-propanol including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C9H13NO2Degré de pureté :Min. 95%Masse moléculaire :167.2 g/molTrazodone Hydrochloride BP Impurity A
CAS :Trazodone Hydrochloride BP Impurity A is an unproven impurity of Trazodone. It inhibits the uptake of serotonin by 5-HT receptors, which may be important in the treatment of depression. This compound also inhibits platelet aggregation and has been found to inhibit the activity of tricyclic compounds, such as piperazine and propionic acid.Formule :C19H22CIN5O2Degré de pureté :Min. 95%Masse moléculaire :491.33 g/molRoxithromycin impurity I
CAS :Roxithromycin impurity I is a natural metabolite of roxithromycin. The substance has been synthesized in order to serve as an analytical impurity standard for HPLC. Roxithromycin impurity 1 is also a metabolite of roxithromycin, which has been shown to produce pharmacological effects similar to those seen with the parent compound. Roxithromycin impurity I is not an API, but has been developed as a HPLC analytical impurity standard and will be used for metabolism studies.
Formule :C45H84N2O17Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :925.15 g/molMoexipril-d5
CAS :Please enquire for more information about Moexipril-d5 including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C27H34N2O7Degré de pureté :Min. 95%Masse moléculaire :503.6 g/mol(3R,5S,6E)-7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2-methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5-dihydroxy- 6-heptenoic acid sodium salt
CAS :(3R,5S,6E)-7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2-methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5-dihydroxy- 6-heptenoic acid sodium salt is a synthetic drug product. It is an impurity standard in the synthesis of Metabolism studies. The CAS number is 1714147-50-8 and the chemical name is (3R,5S,6E)-7-[4-(4-fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2 methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5dihydroxyheptenoic acid sodium salt. The molecular weight is 781
Formule :C25H33FN3NaO7SDegré de pureté :Min. 95%Masse moléculaire :561.6 g/molBortezomib impurity 76
CAS :Bortezomib impurity 76 is an analytical reference material that is used in the development and production of pharmaceuticals. It is a high purity, HPLC standard for use as an impurity in the manufacture of bortezomib API. This material is a metabolite of bortezomib and it has been shown to be pharmacologically active. Bortezomib impurity 76 can also be used as an HPLC standard for drug product analysis.
Formule :C21H44BNO2Si2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :409.56 g/mol(2S,2R,Trans)-saxagliptin
CAS :(2S,2R,Trans)-saxagliptin is an anti-diabetic drug that belongs to the thiazolidinedione class of drugs. It is a synthetic compound that is metabolized by cytochrome P450 enzymes and excreted in urine. (2S,2R,Trans)-saxagliptin has been shown to inhibit the synthesis of glucose in liver cells and to lower blood glucose levels in diabetic animals. In addition, it has been shown to have anti-inflammatory effects by inhibiting the production of TNF-α and IL-6 cytokines.
Formule :C18H25N3O2Degré de pureté :Min. 95%Masse moléculaire :315.40 g/molN-Methyl formoterol fumarate
CAS :N-Methyl formoterol fumarate is a drug product for the treatment of asthma and chronic obstructive pulmonary disease. It is a synthetic drug that has been approved by the FDA, but is also a metabolite of terbutaline. Metabolism studies have shown that N-methyl formoterol fumarate is an impurity in Terbutaline sulfate and Terbutaline hydrochloride. This drug is not active against bacteria, but may be used as an analytical standard to measure the purity of other drugs.
Formule :C44H56N4O12Degré de pureté :Min. 95%Masse moléculaire :832.94 g/molDoxorubicin Impurity 15
CAS :Doxorubicin impurity 15 is a natural product that is used as an analytical reference standard in pharmacopoeia. It has been synthesized for use in drug development and research and development, and is available as a high-purity HPLC standard. Doxorubicin impurity 15 has a CAS number of 131086-18-5.
Formule :C31H38BrNO11Degré de pureté :Min. 95%Masse moléculaire :680.54 g/molTc 1698 dihydrochloride
CAS :Tc 1698 dihydrochloride is a tumor-promoting agent that inhibits the growth of tumor tissues. It has been shown to inhibit the proliferation of human retinal pigment epithelial cells in vitro, which may be due to its ability to induce flavanones. Tc 1698 dihydrochloride can also act as an inducer for the production and release of cytokines, such as IL-6, IL-8 and monocyte chemoattractant protein 1. This agent has been shown to promote angiogenesis and stimulate collagen synthesis in skin fibroblasts.
Formule :C13H20Cl2N2Degré de pureté :Min. 95%Masse moléculaire :275.21 g/mol1,1-Dimethylethyl (3S,5S,6E)-7-[4-(4-fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6- heptenoate
CAS :Please enquire for more information about 1,1-Dimethylethyl (3S,5S,6E)-7-[4-(4-fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6- heptenoate including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C26H36FN3O6SDegré de pureté :Min. 95%Masse moléculaire :537.65 g/molSteptonigrin
CAS :Streptonigrin is an anticancer drug that is derived from the bacterium Streptomyces flocculus. It has been shown to induce apoptosis in cancer cells by inhibiting various kinases, including cyclin-dependent kinases and protein kinases. Streptonigrin has been found to be effective against a variety of tumors, including those of Chinese hamster ovary cells and human urine-derived cancer cells. This inhibitor analog also has a potent inhibitory effect on tumor growth in vivo.
Formule :C25H22N4O8Degré de pureté :Min. 95%Masse moléculaire :506.5 g/molAmlodipine besilate impurity D
CAS :Amlodipine besilate impurity D is a diluent, additive, and stabilizer. It is used in the formulation of pharmaceuticals and other products to prevent particle agglomeration, maintain stability and provide uniformity. Amlodipine besilate impurity D is also used to manufacture bulk density stable pharmaceutical compositions that are suitable for hplc analysis. This product contains magnesium hydroxide as an impurity.
Formule :C20H23ClN2O5Degré de pureté :Min. 95%Masse moléculaire :406.86 g/molRef: 3D-IA63613
Produit arrêté3'-[3-(3-Azido-2,3-dideoxy-b-D-erythro-pentofuranosyl)-3,6-dihydro-5-methyl-2,6-dioxo-1(2H)-pyrimidinyl]-3'-deoxy-thymidine
CAS :3'-[3-(3-Azido-2,3-dideoxy-b-D-erythro-pentofuranosyl)-3,6-dihydro-5-methyl-2,6-dioxo-1(2H)-pyrimidinyl]-3'-deoxythymidine is an analytical standard used in the R&D and drug development of 3'-azido derivatives of thymidine. It is a synthetic intermediate that has been shown to be a potent inhibitor of human immunodeficiency virus type 1 (HIV) replication and to inhibit intracellular HIV type 2 (HIV2) production in cultured cells. 3'-[3-(3-Azido-2,3,-dideoxy--b erythro--pentofuranosyl)-3,6--dihydro--5--methyl--2,6--dioxo--1(2H)--pyrimidinyl]-
Formule :C20H25N7O8Degré de pureté :95%NmrMasse moléculaire :491.45 g/mol(S,S)-IsoValganciclovir hydrochloride
CAS :(S,S)-IsoValganciclovir hydrochloride is a drug product with a purity of 99.5% or greater that is used as a reference standard in drug development and analytical chemistry. It is metabolized to (2R,3R)-2-Amino-3-hydroxypropanoic acid by the enzyme valganciclovir hydrolase. The chemical name for (S,S)-IsoValganciclovir hydrochloride is 2-(Aminomethyl)valganciclovir. The CAS registry number for this compound is 1401562-13-7.
Formule :C14H23ClN6O5Degré de pureté :Min. 95%Masse moléculaire :390.82 g/molErlotinib-3-vinyl hydrochloride
CAS :Erlotinib-3-vinyl hydrochloride is a drug product that is used in the treatment of cancer, including non-small cell lung cancer. It is an impurity standard for HPLC and analytical testing. Erlotinib-3-vinyl hydrochloride is also used as an API impurity and metabolite in metabolism studies. Erlotinib-3-vinyl hydrochloride can be synthesized from 4-(4'-vinylphenoxy)butanal, which is a natural compound obtained from plants like apple trees. This synthetic process can be done by the reduction of 4-(4'-vinylphenoxy)butanal with sodium borohydride, followed by reaction with vinyl chloride. The compound is also found as a metabolite in humans after oral administration of erlotinib, which has been shown to inhibit protein synthesis and DNA synthesis.
Formule :C22H26ClN3O4Degré de pureté :Min. 95%Masse moléculaire :431.9 g/molN-(4-Amino-6,7-dimethoxyquinazol-2-yl)-N-methylpropylenediamine formamide hydrochloride
CAS :N-(4-Amino-6,7-dimethoxyquinazol-2-yl)-N-methylpropylenediamine formamide hydrochloride is an impurity in the synthesis of N-(4-amino-6,7-dimethoxyquinazol-2-yl)-N'-methylpropylenediamine formamide hydrochloride. It is a white solid that can be used as an analytical reference standard for HPLC. It has been detected in the urine of people taking this drug and can be used to identify the presence of this drug in urine samples.
Formule :C14H17N5O2·HClDegré de pureté :Min. 95%Masse moléculaire :323.78 g/molDioctyl carbonate
CAS :Dioctyl carbonate is a pharmaceutical preparation used to treat skin conditions. It is a fatty acid ester of carbonic and carbonyl groups in which the two esters are in the same molecule. Dioctyl carbonate is a reaction product obtained by reacting an inorganic acid, such as hydrochloric acid or sulfuric acid, with an alcohol containing two hydroxyl groups and one double bond. This reaction may be facilitated by heating. The film-forming polymer may be polyvinylpyrrolidone, polyvinyl alcohol, or polyacrylic acid. Dioctyl carbonate has been shown to stimulate colony-stimulating factor production and inhibit the proliferation of human epidermal keratinocytes.
Formule :C17H34O3Degré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :286.4 g/molRef: 3D-BAA68031
Produit arrêtéMoexipril methyl ester analog hydrochloride
CAS :Moexipril methyl ester analog hydrochloride is a drug product that has been custom synthesized for research and development. It is a high purity, analytical grade compound with CAS No. 1356841-17-2. Moexipril methyl ester analog hydrochloride is metabolized through metabolic studies and is a natural metabolite of the drug moexipril. This substance can be found in the pharmacopoeia and is used as an impurity standard. Moexipril methyl ester analog hydrochloride also has niche applications in synthetic chemistry research and development.Formule :C26H32N2O7•HClDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :521 g/molPhenothiazine S,S-dioxide
CAS :Phenothiazine S,S-dioxide is a fluorescent anion that can be used as a buffer. It has an absorption maximum at 514 nm in the visible region and a fluorescence emission maximum at 592 nm. Phenothiazine S,S-doxide blocks the emission of light from phosphor by absorbing the light and reemitting it at a longer wavelength. The luminescence intensity increases with increasing concentration of phenothiazine S,S-dioxide. This compound has been used to develop devices that detect anions in drinking water such as chloride ion. Phenothiazines are also known to have anti-inflammatory effects due to their ability to inhibit prostaglandin synthesis.
Formule :C12H9NO2SDegré de pureté :Min. 95%Masse moléculaire :231.27 g/molPreterramide C
CAS :Preterramide C is a drug that belongs to the class of drugs known as aminopyridines. It is a metabolite of preterramide A and has been used as an analytical reference standard for HPLC. This product is available in the form of a pure white crystalline powder with a purity greater than 98%. It has been shown to be an impurity in drug products and can be used as an impurity standard, as well as being synthesized by natural or synthetic means.
Formule :C24H23N3O7Degré de pureté :Min. 95%Masse moléculaire :465.50 g/molRemdesivir related compound 9
CAS :Remdesivir related compound 9 is a drug product that is an analytical standard. It is a natural API impurity, which has been synthesized for use as an impurity standard. This compound has been custom synthesized to be used as a research and development chemical. CAS No. 1439900-56-7 is the number of this synthetic drug product. It can be used in HPLC standards and it meets pharmacopoeia requirements for purity. The niche market for this compound is high purity analytical standards, including HPLC standards.
Formule :C21H27N2O7PDegré de pureté :Min. 95%Masse moléculaire :450.42 g/molCeftazidime impurity H
CAS :Ceftazidime impurity H is a by-product that can be found in the synthesis of ceftazidime. It has been detected using magnetic separation and UV detection. Ceftazidime impurity H is an antibacterial agent that inhibits bacterial growth. This antibiotic binds to the 50S ribosomal subunit, preventing protein synthesis and cell division.
Formule :C23H24N6O7S2Degré de pureté :Min. 95%Masse moléculaire :560.6 g/molAlpha-Desmethyl anastrozole
CAS :Alpha-Desmethyl anastrozole is a synthetic chemical that has been used as an impurity standard for the drug product, Anastrozole (Arimidex). This compound is metabolized in humans and is a metabolite of Arimidex. Alpha-Desmethyl anastrozole exhibits high purity and can be synthesized using custom synthesis. The CAS number for this compound is 1215780-15-6.
Formule :C16H17N5Degré de pureté :Min. 95%Masse moléculaire :279.34 g/molrac 5-Keto Fluvastatin
CAS :Rac5-Keto Fluvastatin is a synthetic, natural and custom synthesis drug product. It's CAS number is 1160169-39-0. Rac5-Keto Fluvastatin is a metabolite of fluvastatin. The racemic mixture has been prepared by the organic synthesis of racemic 5-keto fluvastatin, which was achieved by the use of a chiral auxiliary. Rac5-Keto Fluvastatin can be used in metabolism studies, as an analytical standard for HPLC, and as a reference material for pharmacopoeia.
Formule :C24H24FNO4Degré de pureté :Min. 95%Couleur et forme :Yellow PowderMasse moléculaire :409.45 g/molPantoprazole sulfone N-oxide
CAS :Pantoprazole sulfone N-oxide is a prodrug that is converted to the active form pantoprazole in the stomach where it inhibits gastric acid secretion. Pantoprazole sulfone N-oxide has been shown to be genotoxic, and can cause polyvinyl chloride to degrade when stored together. Reconstituted solution of this drug should be used within 24 hours after reconstitution, as the chemical stability of this drug decreases rapidly. Validation studies have been conducted on different analytical methods for determining pantoprazole concentrations in reconstituted solutions, and these methods have been harmonized with those published by the United States Pharmacopeia (USP). The pump inhibitor activity of pantoprazole sulfone N-oxide has been demonstrated in dogs, and it is also useful for treating acid reflux disease in humans. Pantoprazole sulfone N-oxide is unstable at high temperatures (>25°C), so should not be refrigerated or
Formule :C16H15F2N3O6SDegré de pureté :Min. 95%Masse moléculaire :415.37 g/molPyrimido[1,2-a]purin-10(1H)-one
CAS :Pyrimido[1,2-a]purin-10(1H)-one is a cytotoxic drug used in the treatment of various cancers. It is an analog of purine nucleoside and has been shown to inhibit mitochondrial functions and nuclear DNA synthesis, as well as to induce malondialdehyde production. Pyrimido[1,2-a]purin-10(1H)-one also inhibits protein synthesis by methyltransferase inhibition. The detection sensitivity of pyrimido[1,2-a]purin-10(1H)-one has been demonstrated using titration calorimetry on sephadex g-100 columns. This compound is not active against E. coli K12 but is active against other bacteria including Staphylococcus aureus isolates that are resistant to methicillin.
Formule :C8H5N5ODegré de pureté :Min. 95%Masse moléculaire :187.16 g/molRef: 3D-DEA40845
Produit arrêtéLysolecithin
CAS :Lysolecithin is an analog of the phospholipid lecithin that has been shown to have anticancer properties. It works by inhibiting kinases, which are enzymes that play a crucial role in cell signaling and regulation. Lysolecithin promotes apoptosis, or programmed cell death, in cancer cells, making it a promising medicinal agent for the treatment of tumors. Studies have also shown that lysolecithin can inhibit protein kinase activity in human urine and inhibit the growth of cancer cells in Chinese hamsters. This compound may prove to be a valuable tool in the development of kinase inhibitors for cancer therapy.
Formule :C24H50NO7PDegré de pureté :Min. 95%Masse moléculaire :495.6 g/mol4-Desfluoro-4-[4-(2-oxo-2,3-dihydro-1H-benzimidazol-1-yl)-3,6-dihydropyridin-1(2H)-yl] droperidol
CAS :4-Desfluoro-4-[4-(2-oxo-2,3-dihydro-1H-benzimidazol-1-yl)-3,6-dihydropyridin-1(2H)-yl] droperidol is a research chemical that belongs to the class of drugs. The 4DDRP is an analytical standard for impurities in droperidol and also has been used as an API impurity in HPLC standards. The chemical is also used for drug development and drug product synthesis. 4DDRP has been shown to be metabolized into oxalic acid, benzeneacetic acid, and benzoic acid.
Formule :C34H34N6O3Degré de pureté :Min. 95%Masse moléculaire :574.70 g/mol17-o-(Acetyl-d3)-6-methylprednisolone
CAS :Produit contrôlé17-o-(Acetyl-d3)-6-methylprednisolone is a drug product that belongs to the group of corticosteroids. It is used for the treatment of inflammatory conditions and autoimmune diseases. This API is used as an impurity standard in analytical methods such as HPLC, and it can be synthesized from natural sources or synthetically. 17-o-(Acetyl-d3)-6-methylprednisolone can also be used in R&D for the development of drugs targeting niche markets, such as those with high purity requirements.
Formule :C24H29D3O6Degré de pureté :Min. 95%Masse moléculaire :419.53 g/mol1-(2-Furoyl)piperazine
CAS :1-(2-Furoyl)piperazine is a potent inhibitor of tyrosinase, an enzyme involved in the production of melanin. It can be used to treat cancer, as well as hyper-pigmentation disorders such as melasma and chloasma. 1-(2-Furoyl)piperazine inhibits tyrosinase by binding to the active site of the enzyme and blocking its access to substrates. This inhibition prevents the conversion of tyrosine to DOPA and further conversion to melanin. 1-(2-Furoyl)piperazine also inhibits other enzymes in the melanin synthesis pathway, including amine oxidase and dopa oxidase.
Formule :C9H12N2O2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :180.2 g/molDesmethyl dehydro lercanidipine
CAS :Desmethyl dehydro lercanidipine is a metabolite of lercanidipine, an antihypertensive agent. Lercanidipine is a dihydropyridine calcium channel blocker that inhibits the influx of calcium ions into cardiac muscle cells and vascular smooth muscle cells. The desmethyl form of lercanidipine has been shown to have anti-inflammatory effects in rats with experimental arthritis. It has also been shown to inhibit the production of inflammatory cytokines in lipopolysaccharide-stimulated human peripheral blood mononuclear cells.
Formule :C35H37N3O6Degré de pureté :Min. 95%Masse moléculaire :595.70 g/molAceclofenac benzyl ester
CAS :Aceclofenac is a nonsteroidal anti-inflammatory drug (NSAID) that belongs to the propionic acid derivative group. It is used in the treatment of mild to moderate pain and inflammation, such as arthritis. Aceclofenac is rapidly hydrolyzed by esterases in the small intestine, resulting in the release of aceclofenac acid. Aceclofenac benzyl ester is a chemical intermediate that has been shown to be an efficient method for producing aceclofenac acid. It can be obtained by reacting bromoacetic anhydride with methyl alcohol and then hydrolyzing the product with strong acids. This compound may contain impurities, such as nucleophilic impurities, which can lead to side effects.
Formule :C23H19Cl2NO4Degré de pureté :Min. 95%Masse moléculaire :444.31 g/molcis-Tadalafil
CAS :Cis-Tadalafil is a potent inhibitor of phosphodiesterase 5, which is used to treat erectile dysfunction (ED) and primary pulmonary hypertension (PPH). It works by increasing blood flow to the penis, allowing men with ED to achieve and maintain an erection. Cis-Tadalafil is also used to treat symptoms of prostatic hyperplasia (enlarged prostate) in men. This drug has been shown to be effective in treating PPH by reducing pulmonary arterial pressure and improving exercise capacity. Cis-Tadalafil belongs to the carboline class of drugs and is a phosphodiesterase 5 inhibitor that selectively inhibits cGMP-specific phosphodiesterase type 5 (PDE5). This drug has been shown to be highly effective in treating both ED and PPH with minimal side effects.
Formule :C22H19N3O4Degré de pureté :Min. 95%Couleur et forme :White/Off-White SolidMasse moléculaire :389.4 g/molRef: 3D-FT27987
Produit arrêtéN-Hydroxymethyl Sumatriptan
CAS :N-Hydroxymethyl Sumatriptan is an analytical standard and a research and development impurity. It is also used as an API impurity in drug product manufacturing. N-Hydroxymethyl Sumatriptan can be synthesized by reacting the parent drug with hydroxyl radicals, which is a process that yields no side products. N-Hydroxymethyl Sumatriptan can be found in the following pharmacopoeia: United States Pharmacopoeia (USP) 11>, European Pharmacopoeia (EP), Japanese Pharmacopoeia (JP)13>, British Pharmacopoeia (BP), and Chinese Pharmacopiae (CPC).
Formule :C15H23N3O3SDegré de pureté :Min. 95%Masse moléculaire :325.43 g/molPiperacilloic acid
CAS :Piperacilloic acid is a synthetic compound that exhibits antibacterial activity. It has been shown to be effective against human pathogens, including urothelial carcinoma and human serum. Piperacilloic acid binds to the amino acids lysine and arginine in bacterial proteins and inhibits protein synthesis by inhibiting the function of enzymes that require these amino acids for their activity. The potency of piperacillin is low, but it is activated by hydrolysis in the acidic environment of the stomach or intestinal tract. Piperacilloic acid also has potential as a contraceptive agent because it may inhibit transcriptional regulation of genes that are involved in sperm production.
Formule :C23H29N5O8SDegré de pureté :(Elemental Analysis) Min. 90 Area-%Couleur et forme :PowderMasse moléculaire :535.57 g/molRef: 3D-FP27061
Produit arrêté(3S,4R)-Tofacitinib
CAS :(3S,4R)-Tofacitinib is a rhombic and paramagnetic compound with a Curie point of approximately 10.6°C. It is soluble in nonpolar solvents such as benzene and toluene. (3S,4R)-Tofacitinib has been shown to have magnetic properties that are dependent on the temperature and the frequency of the applied magnetic field. The paramagnetic resonance spectra were observed at 18°C and 32°C, while the paramagnetic resonance spectrum was observed at -2°C. The octahedral interactions are likely due to the presence of six different types of iron ions in the crystal structure.
Formule :C16H20N6ODegré de pureté :Min. 95%Masse moléculaire :312.37 g/molRef: 3D-STB57848
Produit arrêtéIvermectin impurity I
CAS :Ivermectin impurity I is an analytical standard that is used for pharmacopoeia and custom synthesis. It is a natural metabolite of the drug Ivermectin, which has been shown to have anti-inflammatory properties in mice. Ivermectin impurity I binds to nicotinic acetylcholine receptors, leading to muscle paralysis and death. This compound is found in high purity for research and development purposes.
Formule :C48H74O14Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :875.09 g/molTerbinafine dihydrochloride
CAS :Terbinafine is a drug used in the treatment of onychomycosis, tinea versicolor and dandruff. It belongs to the group of medicines known as antifungals and inhibits the growth of fungi by inhibiting their ability to make proteins. Terbinafine dihydrochloride is a form of terbinafine that is more soluble in water than terbinafine hydrochloride and can be used as a lubricant. Terbinafine hydrochloride is an industrial product that is used as a disintegrant in tablets and capsules.
Formule :C36H40N2Degré de pureté :Min. 95%Masse moléculaire :500.7 g/molN-Nitroso dorzolamide
N-Nitroso dorzolamide is a chemical compound used as an intermediate in the synthesis of dorzolamide, a carbonic anhydrase inhibitor used in the treatment of glaucoma and ocular hypertension.
Formule :C10H15N3O5S3Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :353.44 g/molRoflumilast Impurity A
CAS :Roflumilast impurity A is a metabolite of roflumilast. It is a drug product that is used as an analytical standard for the determination of roflumilast in HPLC analysis. Roflumilast impurity A is not natural and is synthetic. It has been shown to be a substrate for CYP1A2, CYP2C8, CYP2C9, and CYP3A4 enzymes. Studies have shown that it may be involved in the metabolism of roflumilast through hydroxylation and deamination.
Formule :C16H14Cl2N2O3Degré de pureté :Min. 95%Masse moléculaire :353.2 g/molRef: 3D-IR168438
Produit arrêté(S)-Rabeprazole sodium
CAS :(S)-Rabeprazole sodium is an anticancer drug that acts as a kinase inhibitor. It is an analog of Rabeprazole and has been shown to inhibit the growth of cancer cells in vitro and in vivo. (S)-Rabeprazole sodium inhibits the activity of kinases, which are enzymes that play a key role in cell signaling pathways. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. (S)-Rabeprazole sodium has been tested against various types of cancer, including Chinese hamster ovary cells and tumor xenografts in mice. It has also been shown to inhibit elastin degradation, which is important for preventing metastasis of cancer cells. (S)-Rabeprazole sodium may be a promising candidate for the development of new anticancer drugs that target specific kinases and proteins involved in cancer cell growth and survival.
Formule :C18H21N3O3S•NaDegré de pureté :Min. 95%Masse moléculaire :382.43 g/molOxacyclohexane open ring tacrolimus
CAS :Please enquire for more information about Oxacyclohexane open ring tacrolimus including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C44H71NO13Degré de pureté :Min. 95%Masse moléculaire :822.04 g/molAcarbose Impurity E
CAS :Acarbose Impurity E is an impurity found in acarbose. It is a natural, API impurity and is a synthetic impurity standard. Acarbose Impurity E has been used in drug development research and development, as well as in the HPLC analysis of acarbose to generate a pharmacopoeia-grade purity standard.
Degré de pureté :Min. 95%Rocuronium Bromide EP Impurity F Bromide
CAS :Rocuronium Bromide EP Impurity F Bromide is an impurity found in Rocuronium Bromide EP. It is a natural component of the drug product, which is a synthetic drug. The metabolite of this impurity is also found in the natural product, although at much lower concentrations. This impurity has been shown to be present as an analytical impurity in the API and custom synthesis process. This impurity standard has been synthesized synthetically for use in drug development and research and development, as well as for use in HPLC standards.Formule :C34H55N2O4·BrDegré de pureté :Min. 95%Masse moléculaire :635.72 g/molRef: 3D-IR178405
Produit arrêtéPramipexole EP Impurity C
CAS :Pramipexole EP Impurity C is a synthetic impurity that is used as an impurity standard in the manufacture of Pramipexole EP. It is also used as a research and development tool for drug product, custom synthesis, CAS No. 1973461-14-1, and analytical studies. This compound has been shown to be a metabolite of Pramipexole EP and may have pharmacological properties. Pramipexole EP Impurity C has been found to inhibit the growth of certain bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA) isolates.
Formule :C20H32N6S2Degré de pureté :Min. 95%Ref: 3D-FP165425
Produit arrêté3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride
CAS :3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride is a versatile compound with various characteristics and applications. It has been found to have diverse effects on different biological processes. This compound has shown potential as an antimuscarinic agent, which means it can block the action of acetylcholine at muscarinic receptors in the body.
Formule :C19H25ClN2O2Degré de pureté :Min. 95%Masse moléculaire :348.9 g/molSacubitril Impurity 2
CAS :Sacubitril Impurity 2 is a drug product that is an analytical impurity in Sacubitril. This impurity can be found in Sacubitril as a result of natural processes or as an API impurity during the synthesis process. Sacubitril Impurity 2 has been shown to have activity in Metabolism studies, Natural, and Custom synthesis. It has been shown to be a Synthetic impurity standard and HPLC standard. Sacubitril Impurity 2 is used for research and development purposes for the drug development industry, specifically for the niche market. It is also used as an analytical standard for pharmacopoeia methods.
Formule :C24H27NO4Degré de pureté :Min. 95%Masse moléculaire :393.48 g/molRef: 3D-IS181152
Produit arrêtéN-Benzyl albuterol
CAS :N-Benzyl albuterol is a drug product that is custom synthesized to be of high purity with an analytical standard. It is used in research and development, pharmaceutical development, and as a pharmacopoeia or analytical standard. N-Benzyl albuterol has been found to be a metabolite of the drug product Albuterol Sulfate. It is also used in metabolism studies and natural product research. The CAS number for this compound is 24085-03-8.
Formule :C20H27NO3Degré de pureté :Min. 95%Masse moléculaire :329.4 g/mol(4-Chlorophenyl)diphenylmethanol
CAS :Please enquire for more information about (4-Chlorophenyl)diphenylmethanol including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C19H15ClODegré de pureté :Min. 95%Masse moléculaire :294.8 g/molN-Desacetyl thiocolchicoside
CAS :N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.
Formule :C25H31NO9SDegré de pureté :Min. 95%Masse moléculaire :521.58 g/molLinagliptin impurity G
CAS :Linagliptin impurity G is an impurity in the drug product Linagliptin. It is a natural substance and its CAS number is 668270-11-9. Impurity G can be synthesized from L-phenylalanine and cyclohexane carboxaldehyde in a two step process. The first step involves the reaction of L-phenylalanine with cyclohexane carboxaldehyde to yield methylcyclohexanecarboxylate, which then undergoes hydrolysis to give phenylcyclohexanol. In the second step, phenylcyclohexanol reacts with hydrochloric acid to produce phenylcyclohexanone, which is then oxidized with hydrogen peroxide to yield impurity G. Impurity G can also be found in the pharmacopoeia as a high purity HPLC standard for linagliptin.
Formule :C25H28N8O2Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :472.54 g/molRef: 3D-FA146003
Produit arrêtéCiprofloxacin ep impurity C
CAS :Ciprofloxacin ep impurity C is a synthetic compound. It is used as a research and development standard in the synthesis of ciprofloxacin. The purity of this compound is high, and it has been tested for metabolism studies. This impurity can be detected by HPLC using an analytical method with a natural reference substance. This impurity has not been evaluated for pharmacopoeia or CAS number.
Formule :C15H16FN3O3Degré de pureté :Min. 95%Masse moléculaire :305.30 g/molEmpagliflozin S-furanose
CAS :Empagliflozin S-furanose is a Custom synthesis drug product. It is an analytical standard with CAS No. 1620758-32-8, and it is used in research and development of new drugs. Empagliflozin S-furanose has been found to be a metabolite of empagliflozin, a drug that is used to treat type 2 diabetes mellitus. It is also used as an impurity standard for HPLC analysis of empagliflozin because it does not have any biological activity.
Formule :C23H27ClO7Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :450.91 g/molDicyclopropylamine hydrochloride
CAS :Dicyclopropylamine hydrochloride is a tyrosine kinase inhibitor that blocks the activity of jak2. It is an innovative molecule with the potential to be used in cancer treatment. Dicyclopropylamine hydrochloride has been shown to inhibit activation of tyrosine kinases, which are involved in cell signaling and proliferation. Dicyclopropylamine hydrochloride also has anti-inflammatory properties, which may be due to its ability to inhibit prostaglandin synthesis. This drug is not expected to have any toxicity or side effects because it can be easily metabolized by the liver.br>br> Dicyclopropylamine hydrochloride is a white solid with a melting point of 175°C. It has no detectable odor, and it is soluble in water and ethanol. The impurities found in this compound include myristic acid and amines, which can cause inflammatory diseases.br>br> D
Formule :C6H11N•HClDegré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :133.62 g/mol2-(2-Amino-5-bromobenzoyl)pyridine
CAS :2-(2-Amino-5-bromobenzoyl)pyridine (2ABBP) is a chemical compound with the molecular formula C10H7BrN3. It is a glucuronide conjugate of 2-amino-5-bromobenzoic acid and has been used as an immunological reagent in the form of a monoclonal antibody. 2ABBP binds to dryopteris, which is a plant species that contains polyphenols called pteridines. 2ABBP has been shown to have anti-inflammatory properties in rat liver microsomes and cell culture experiments. The mechanism of action may involve inhibition of cyclooxygenase enzymes, which are involved in prostaglandin synthesis. 2ABBP also binds to human serum albumin and chaperones, proteins that bind other proteins or small molecules. The biological activity of 2ABBP may be due to its ability to form coval
Formule :C12H9BrN2ODegré de pureté :Min. 95%Masse moléculaire :277.12 g/molRef: 3D-IA17613
Produit arrêtéSimvastatin acid
CAS :Simvastatin acid is the active form of simvastatin, a drug used to lower blood cholesterol levels. Simvastatin acid inhibits HMG-CoA reductase, the enzyme that converts HMG-CoA to mevalonate. This conversion is a rate-limiting step in the synthesis of cholesterol and other lipids. Simvastatin acid binds to polymerase chain and drug transporter proteins, which leads to cell lysis. The concentration–time curve for simvastatin acid is linear and the half-life is approximately 12 hours. When simvastatin acid is administered with drugs that are potent inducers of CYP3A4 or UGT1A1 enzymes, there may be an increased risk for drug interactions. Simvastatin acid has shown no significant human pharmacokinetic interactions with food or grapefruit juice at doses up to 200 mg/day. There are limited data on the pharmacokinetics of simvastatin
Formule :C25H40O6Degré de pureté :Min. 95%Couleur et forme :White PowderMasse moléculaire :436.58 g/molDesfluoro ezetimibe
CAS :Desfluoro ezetimibe is a synthetic cholesterol-lowering drug that inhibits intestinal cholesterol absorption. It is chemically synthesized, and the process includes the introduction of fluorine at the 3-position of the C-ring. Desfluoro ezetimibe is not metabolized in humans, but it may be subject to oxidative degradation. The product is also subject to oxidation by light and air, which may result in formation of impurities. The drug substance has been validated as well as its isomers and efficiencies in mass spectrometry detection.
Formule :C24H22FNO3Degré de pureté :Min. 95%Couleur et forme :White To Off-White SolidMasse moléculaire :391.43 g/molRef: 3D-FD21193
Produit arrêtéTofacitinib dihydro impurity
CAS :Tofacitinib dihydro impurity is a research and development impurity standard for the synthesis of Tofacitinib. It is a custom synthesis with high purity, pharmacopoeia grade, and synthetic. This product is also used in drug development for metabolism studies and analytical applications.
Formule :C16H22N6ODegré de pureté :Min. 95%Masse moléculaire :314.39 g/molRef: 3D-QQC97235
Produit arrêtéChlorthalidone impurity E
CAS :Chlorthalidone impurity E is an analytical standard for the HPLC analysis of chlorthalidone in pharmaceutical drug products and is a metabolite of chlorthalidone. Chlorthalidone impurity E is an API impurity that can be found in the synthesis of chlorthalidone, and it has been detected as a minor component in certain drug products. It is important to have an accurate specification for this compound, since it can affect the pharmacological properties of the drug product. The purity level of this compound must be at least 98% or greater to ensure that there are no contaminants present. This compound is also a metabolite of chlorthalidone and is used as a pharmacopoeia reference substance for testing equipment calibration.END>
Formule :C14H11ClN2O3SDegré de pureté :Min. 95%Masse moléculaire :322.77 g/molD-6-Cyano-6-norlysergic acid methyl ester
CAS :Please enquire for more information about D-6-Cyano-6-norlysergic acid methyl ester including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formule :C17H15N3O2Degré de pureté :Min. 95%Masse moléculaire :293.32 g/molTriethylene glycol flufenamate
CAS :Etofenamate impurity
Formule :C20H22F3NO5Degré de pureté :Min. 95%Couleur et forme :Clear LiquidMasse moléculaire :413.39 g/molAtorvastatin calcium trihydrate EP Impurity G
CAS :Atorvastatin is a drug that belongs to the class of statins. It is used for the treatment of high cholesterol levels and other related diseases, such as cardiovascular disease. Atorvastatin calcium trihydrate EP Impurity G is an impurity that may be present in atorvastatin calcium trihydrate. This compound has not been found to have any pharmacological activity.
Formule :C34H37FN2O5Degré de pureté :Min. 95%Couleur et forme :PowderMasse moléculaire :572.67 g/molRef: 3D-IA182820
Produit arrêtéGS 441524 triphosphate
CAS :Triphosphorylated form of an antiviral nucleoside analog with activity against zoonotic feline infectious peritonitis virus (FIPV) and severe acute respiratory syndrome (SARS) virus from Coronaviridae family. The compound is the biologically active form of the GS 441524 prodrug and being triphosphorylated, it competes with natural nucleoside triphosphates in cells and interferes with viral RNA synthesis. Made to order.
Formule :C12H12N5O13P3·4NaDegré de pureté :(31P-Nmr) Min. 95 Area-%Couleur et forme :White PowderMasse moléculaire :531.20 g/mol
