CAS 20344-49-4
:Hidróxido de ferro óxido, (Fe(OH)O)
Descrição:
O óxido de hidróxido de ferro, com a fórmula química Fe(OH)O e número CAS 20344-49-4, é um composto inorgânico que normalmente aparece como um sólido marrom ou avermelhado. É um hidróxido e óxido metálico misto, o que indica que contém tanto grupos hidróxido (OH) quanto íons óxido (O). Este composto está frequentemente associado aos vários estados de oxidação do ferro, principalmente Fe(II) e Fe(III), e pode desempenhar um papel em vários processos químicos, incluindo catálise e remediação ambiental. O óxido de hidróxido de ferro é relativamente insolúvel em água, o que contribui para sua estabilidade em várias condições. Pode ser formado através da oxidação de sais de ferro em condições alcalinas ou pela precipitação de íons de ferro na presença de íons hidróxido. Este composto é de interesse em campos como ciência dos materiais, química ambiental e tratamento de águas residuais, onde pode ajudar na remoção de contaminantes devido às suas propriedades de adsorção. Além disso, pode servir como precursor para a síntese de outros materiais à base de ferro.
Fórmula:FeHO2
InChI:InChI=1/Fe.H2O.O/h;1H2;/q+1;;/p-1
Chave InChI:InChIKey=AEIXRCIKZIZYPM-UHFFFAOYSA-M
SMILES:[Fe](O)=O
Sinónimos:- Cfh 12
- Cfh 18
- Colortherm 10
- Colortherm Yellow 10
- Colortherm Yellow C 10
- Daipyroxide Yellow 8170
- Depox
- Duploxide 510P
- E 331
- E 331 (oxide)
- Eisenhydroxidoxid
- FeOOH
- Fei 16Pb
- Ferric hydroxide oxide
- Ferric hydroxide oxide (FeOOH)
- Ferric oxide hydroxide
- Ferric oxyhydroxide (FeO2H)
- Ferric oxyhydroxide (FeO<sub>2</sub>H)
- Ferric(III) acid
- Ferronan 2505
- Ferrosorp DGp
- Ferrosorp DGp+K
- Ferrosorp DGμ
- Ferrous acid
- Geh 101
- Hidroxioxido De Hierro
- Hydroxydeoxyde de fer
- Iron Hydroxide Oxide
- Iron Oxide Hydroxide
- Iron Oxide Yellow
- Iron hydroxide oxide (FeO(OH))
- Iron monohydroxide monooxide
- Iron monoxide monohydroxide
- Iron oxide hydroxide (FeO(OH))
- Iron oxyhydroxide (FeO(OH))
- Iron(III) oxide hydroxide
- Iron(III) α-oxyhydroxide
- Ll 100P
- Sicopur Yellow
- Synthetic lepidocrocite
- Tarox HY 250
- Tarox LL 100P
- Tarox LL-XLO
- Tarox Synthetic Iron Oxide LL-XLO
- Tarox XLO
- Tarox Yellow LL 100P
- Transyellow AC 500
- Tsy 1
- Y 48
- Yellow LL 100P
- Ylo 2288D
- Ym 1100
- α-FeOOH
- α-Iron hydroxide
- α-Iron hydroxide oxide (FeOOH)
- Iron hydroxide oxide (Fe(OH)O)
- IRON(III)OXIDE, HYDRATED, 30-50 MESH
- IRON OXIDE YELLOW HD718
- Hodgsons Bayferrox Yellow 415
- Ferric oxyhydroxide
- Iron(III) hydroxide, γ-phase
- Iron(III) hydroxide, ɑ-phase
- IRON HYDROXIDE
- ironhydroxideoxide(fe(oh)o)
- c.i. 77492
- Eisen(III)-hydroxidoxid
- Hodgsons Bayferrox Yellow 930
- IRON (III) HYDROXIDE
- pigment yellow 42
- IRON(III)OXIDE, HYDRATED, 50-80 MESH
- iron(iii) oxyhydroxide
- FERRIC HYDROXIDE
- 313 IRON OXIDE YELLOW 313
- Ver mais sinónimos
Ordenar por
Pureza (%)
0
100
|
0
|
50
|
90
|
95
|
100
Foram encontrados 8 produtos.
Iron(III) hydroxide, α-phase
CAS:Iron(III) hydroxide is used in purifying water and as an absorbent in chemical processes. It is also used as a pigment and as a catalyst. Further, it is used in some tattoo ink and in aquarium water treatment as a phosphate binder. This Thermo Scientific Chemicals brand product was originally part oFórmula:FeHO2Peso molecular:88.85Iron(III) hydroxide, 99+%
CAS:Iron(III) hydroxide, alpha-phase, is used as a catalyst for proteomics research. It is also used as a pharamaceutical intermediate. This Thermo Scientific Chemicals brand product was originally part of the Alfa Aesar product portfolio. Some documentation and label information may refer to the legacFórmula:FeHO2Pureza:99+%Cor e Forma:Powder, Yellow to brownPeso molecular:88.85Iron(III) hydroxide, 20% in H{2}O, nanoparticle dispersion, low pH, <5.0nm APS Number Weighted
CAS:Iron(III) hydroxide is used in cosmetics, tattoo inks and aquarium water treatment. It is used as a pigment and as an adsorbent for removing lead from aquatic media. It acts as a catalyst for proteomics research. It is involved in the removal of toxic selenate and selenite ions from water systems.Fórmula:FeHO2Peso molecular:88.85Iron(III) hydroxide, γ-phase
CAS:Iron(III) hydroxide, -phase is used in purifying water and as an absorbent in chemical processes. It is involved in the preparation of iron oxide-hydroxides nanoparticles, which is used as a very good adsorbent for lead removal from aquatic media. It is also used as a pigment, as a catalyst and in aFórmula:FeHO2Peso molecular:88.85Iron(III) oxyhydroxide in water at pH = 3.0 +- 0.5 (FEO-W320)
CAS:Fórmula:FeHO2Pureza:99%Cor e Forma:SolidPeso molecular:88.8517Iron(III) hydroxide, α-phase
CAS:Iron(III) hydroxide, α-phaseFórmula:FeHO2Pureza:99%Cor e Forma:Solid-PowderPeso molecular:88.85174Iron Oxide (Solution in water)
CAS:Produto ControladoFórmula:FeHO2Cor e Forma:Single SolutionPeso molecular:88.852Iron(III) oxyhydroxide in water at pH = 3.0 +- 0.5 (FEO-W320)
CAS:Iron(III) oxyhydroxide in water at pH = 3.0 +- 0.5 (FEO-W320)
Fórmula:FeO(OH)Peso molecular:88.85
