Physicochemical Standards
Subcategories of "Physicochemical Standards"
- Colour Standards(74 products)
- Cryoscope Standards(10 products)
- Density Standards(107 products)
- Melting Point Standards(16 products)
- Osmolality Standards(27 products)
- Refractive Index Standards(96 products)
- Turbidity Standards(137 products)
- Viscosity Standards(75 products)
Found 3970 products of "Physicochemical Standards"
Reagecon Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether
CAS:This Reagecon Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and Oxygenate compounds in Gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. Description | Concentration: - ETBE: 20 %. - Methanol: 6 %. - Petroleum Ether: 54 %. - TAME: 20 %.Color and Shape:LiquidReagecon Pesticide Standard (8 Compound Mix) in Hexane:Acetone
This Reagecon Pesticide Standard 8 Compound Mix is a ready to use product that is used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC; GC-MS; HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. - The identity of each standard is verified using a high performance calibrated Gas Chromatograph Mass Spectrometer (GC-MS Instrument). The mass spectrum of each of the analytes is confirmed by comparison with the National Institute of Standards and Technology (NIST) mass spectral library. - Ready to use (dilute for use as calibration and/or quality control standards). - Can be used with a variety of instruments including GC; GC-MS; HPLC and LC-MS. - Produced in accordance with EPA methods. - Designed for use in EPA or EU analytical methods. - Ideal for use in EPA 500; 600 and 8000 series methods. - Consistency of product - Independent; Traceable; Tested. Description | Concentration: - alpha-BHC: 400 µg/mL. - beta-BHC: 1000 µg/mL. - Lindane: 600 µg/mL. - delta-BHC: 600 µg/mL. - 4,4'-DDT: 1500 µg/mL. - 2,4'-DDT: 1000 µg/mL. - 4,4'-DDE: 800 µg/mL. - 4,4'-DDD: 1000 µg/mL.Color and Shape:LiquidReagecon Pesticide Standard (8 Compound Mix) in Hexane:Acetone
CAS:This Reagecon Pesticide Standard 8 Compound Mix is a ready to use product that is used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC; GC-MS; HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. - The identity of each standard is verified using a high performance calibrated Gas Chromatograph Mass Spectrometer (GC-MS Instrument). The mass spectrum of each of the analytes is confirmed by comparison with the National Institute of Standards and Technology (NIST) mass spectral library. - Ready to use (dilute for use as calibration and/or quality control standards). - Can be used with a variety of instruments including GC; GC-MS; HPLC and LC-MS. - Produced in accordance with EPA methods. - Designed for use in EPA or EU analytical methods. - Ideal for use in EPA 500; 600 and 8000 series methods. - Consistency of product - Independent; Traceable; Tested. Description | Concentration: - 2,4'-DDT: 100 µg/mL. - 4,4'-DDD: 100 µg/mL. - 4,4'-DDE: 100 µg/mL. - 4,4'-DDT: 100 µg/mL. - alpha-BHC: 100 µg/mL. - beta-BHC: 100 µg/mL. - delta-BHC: 100 µg/mL. - lindane: 100 µg/mL.Color and Shape:LiquidReagecon Volatile Organic Compound (VOC) Single Compound Standard Tetraethyl Lead 200 µg/mL in Purge and Trap Methanol
This Reagecon Volatile Organic Compound (VOC) Single Compound Standard is a ready to use product that is used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC; GC-MS; HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. - The identity of each standard is verified using a high performance calibrated Gas Chromatograph Mass Spectrometer (GC-MS Instrument). The mass spectrum of each of the analytes is confirmed by comparison with the National Institute of Standards and Technology (NIST) mass spectral library. - Ready to use (dilute for use as calibration and/or quality control standards). - Can be used with a variety of instruments including GC; GC-MS; HPLC and LC-MS. - Produced in accordance with EPA methods. - Designed for use in EPA or EU analytical methods. - Ideal for use in EPA 500; 600 and 8000 series methods. - Consistency of product - Independent; Traceable; Tested.Color and Shape:LiquidReagecon Cetane Improver 2-Ethylhexyl Nitrate 0.2% Calibration Standard in Chevron Phillips High Cetane Reference Fuel
This Reagecon Cetane Improver Calibration Standard is a ready to use standard in Petroleum Ether used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for 2-Ethylhexyl Nitrate a known Cetane improver, in Diesel, in accordance with the International Standard ASTM E1655, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS.Color and Shape:LiquidReagecon Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether
CAS:This Reagecon Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and Oxygenate compounds in Gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. Description | Concentration: - Methanol: 6 %. - 3-ET-Toluene: 5.2 %. - Toluene: 7 %.Color and Shape:LiquidReagecon Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether
This Reagecon Gasoline Calibration Standard 2 Compound Mix in Petroleum Ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. - This standard is used in testing Benzene levels in Gasoline in accordance with the International Standard ASTM D6277 and EN 238 using infrared (IR) instrumentation. - The identity of each standard is verified using a high performance calibrated Gas Chromatograph Mass Spectrometer (GC-MS Instrument). The mass spectrum of each of the analytes is confirmed by comparison with the National Institute of Standards and Technology (NIST) mass spectral library. Description | Concentration: - Benzene: 5 %. - Pr-Benzene: 10 %.Color and Shape:LiquidReagecon Fatty Acid Methyl Ester (FAME) 6 Compound Mix according to European Pharmacopoeia (EP) Chapter 2.4.22-1 Neat
This Reagecon Fatty Acid Methyl Ester (FAME) 6 Compound Mix is presented in Neat form (solid). This presentation confers on the user advantages, that include flexibility in terms of matrix type and concentration of standard prepared, easier storage, safer handling and extended shelf life. The product can be used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC, GC-MS, HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The esterification of fatty acids is an important tool for both characterising fats and oils and for determining the total fat content in foods and foodstuffs. It is also an important measurement for the assessing of quality and purity of biofuels. Description | Concentration: - Methyl Laurate: 5% w/w. - Methyl Myristate: 5% w/w. - Methyl Palmitate: 10% w/w. - Methyl Stearate: 20% w/w. - Methyl Arachidate: 40% w/w. - Methyl Oleate: 20% w/w.Color and Shape:SolidReagecon Fatty Acid Methyl Ester (FAME) 8 Compound Mix according to European Pharmacopoeia (EP) Chapter 2.4.22-3 Neat
This Reagecon Fatty Acid Methyl Ester (FAME) 8 Compound Mix is presented in Neat form (solid). This presentation confers on the user advantages, that include flexibility in terms of matrix type and concentration of standard prepared, easier storage, safer handling and extended shelf life. The product can be used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC, GC-MS, HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The esterification of fatty acids is an important tool for both characterising fats and oils and for determining the total fat content in foods and foodstuffs. It is also an important measurement for the assessing of quality and purity of biofuels. Description | Concentration: - Methyl Myristate: 5% w/w. - Methyl Palmitate: 10% w/w. - Methyl Stearate: 15% w/w. - Methyl Arachidate: 20% w/w. - Methyl Oleate: 20% w/w. - Methyl Eicosenoate: 10% w/w. - Methyl Behenate: 10% w/w. - Methyl Lignocerate: 10% w/w.Color and Shape:SolidReagecon Fatty Acid Methyl Ester (FAME) 5 Compound Mix according to European Pharmacopoeia (EP) Chapter 2.4.22-2 Neat
This Reagecon Fatty Acid Methyl Ester (FAME) 5 Compound Mix is presented in Neat form (liquid). This presentation confers on the user advantages, that include flexibility in terms of matrix type and concentration of standard prepared, easier storage, safer handling and extended shelf life. The product can be used either as a calibrant or analytical control solution for a variety of gas and liquid chromatography methods that include GC, GC-MS, HPLC and LC-MS. This product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The esterification of fatty acids is an important tool for both characterising fats and oils and for determining the total fat content in foods and foodstuffs. It is also an important measurement for the assessing of quality and purity of biofuels. Description | Concentration: - Methyl Caproate: 10% w/w. - Methyl Caprylate: 10% w/w. - Methyl Caprate: 20% w/w. - Methyl Laurate: 20% w/w. - Methyl Myristate: 40% w/w.Color and Shape:LiquidReagecon Saybolt -15 Colour Standard
Reagecon's Saybolt -15 Colour Standard can be used to calibrate, control, qualify or validate colour measurement instruments. This includes ASTM specified methods D 156 and D 6045. The standard is particularly suited for colour grading light coloured petroleum products.Color and Shape:LiquidReagecon pH 4.005 DIN 19266 Buffer Solution at 25°C in Bag-in-Box
Reagecon's DIN 19266 pH Buffer Solution at 25°C is tested by our ISO 17025 Accredited Test Method (A2LA Ref: 6739.03) and NIST traceable.Color and Shape:LiquidReagecon Potassium Iodide TS Solution according to United States Pharmacopoeia (USP)
Reagecon's Potassium Iodide TS Solution according to United States Pharmacopoeia (USP) is specified for use in individual United States Pharmacopoeia (USP) Monographs. It is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03); is NIST traceable and has guaranteed stability throughout its entire shelf life; even after opening the bottle.Color and Shape:LiquidReagecon Acetate Buffer pH 4.5 Dissolution Media in accordance to United States (USP) and European Pharmacopoeias (EP)
Reagecon's Acetate Buffer pH 4.5 Dissolution Media is a ready to use solution, specifically formulated to perform dissolution studies on solid form pharmaceutical preparations. The product is prepared in accordance with relevant Pharmacopoeia requirements, without any deviations in materials or methodology from the Pharmacopoeia methods. - The product has the reported accuracy and guaranteed stability of 2 years.Color and Shape:LiquidReagecon ICP, ICP-MS Multi Element Standard (7 Elements) in 5% Nitric Acid (HNO₃) and 1% Hydroflouric Acid (HF)
Pricing displayed is Nett. For order quantities above 4 units, ask your sales contact for a quotation. Reagecon’s Multi Element Standards for ICP; ICP-MS in 5% Nitric Acid (HNO₃) and 1% Hydroflouric Acid (HF) is manufactured from ultra-pure metals or salts. This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level. Description | Concentration: - Titanium (Ti): 100 µg/mL (ppm). - Tungsten (W): 100 µg/mL (ppm). - Gadolinium (Gd): 100 µg/mL (ppm). - Palladium (Pd): 100 µg/mL (ppm). - Rubidium (Rb): 100 µg/mL (ppm). - Tellurium (Te): 100 µg/mL (ppm). - Thorium (Th): 100 µg/mL (ppm).Color and Shape:LiquidReagecon Ion Chromatography (IC) Multi Element Anion Standard (6 Elements) in Water (H₂O)
Pricing displayed is Nett. For order quantities above 4 units, ask your sales contact for a quotation. Reagecon’s Multi Element Anion Standard for Ion Chromatography (IC) in H₂O is manufactured from ultra-pure salts. This product is manufactured gravimetrically. Prior to bottling; the final product is tested and verified using a state of the art ion chromatograph and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment; using ultra-pure water (specially treated for the production of ion chromatography standards) and triple leached pre-cleaned bottles. All of the uncertainties of measurement for the product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level. Description | Concentration: - Chlorine (Cl): 100 µg/mL (ppm). - Fluorine (F): 2.5 µg/mL (ppm). - Nitrate (NO₃): 25 µg/mL (ppm). - Nitrite (NO₂): 2.5 µg/mL (ppm). - Phosphate (PO₄³): 15 µg/mL (ppm). - Sulphate (SO₄²): 100 µg/mL (ppm).Color and Shape:LiquidReagecon Potassium Iodide TS Solution according to United States Pharmacopoeia (USP)
Reagecon's Potassium Iodide TS Solution according to United States Pharmacopoeia (USP) is specified for use in individual United States Pharmacopoeia (USP) Monographs. It is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03); is NIST traceable and has guaranteed stability throughout its entire shelf life; even after opening the bottle.Color and Shape:LiquidReagecon N15000 Kinematic Viscosity, Dynamic Viscosity and Density Standard
Reagecon’s N15000 Kinematic Viscosity, Dynamic Viscosity and Density Standard can be used to calibrate, control or validate all types of viscometers including capillary, flow cup, rotational, falling ball, falling/rising object, stabinger and vibrational viscometers.This Viscosity Standard and all Reagecon Viscosity Standards are reported to 4 significant figures on their Certificate of Analysis.Only 2 significant figures are shown here for expediency of layout. - This product has been tested according to ASTM method D 2162 for Kinematic Viscosity using Ubbelohde Master Viscometers. - The Density has been tested in accordance with ASTM method D4052 (Kinematic Viscosity x Density = Dynamic Viscosity). - Kinematic Viscosity values and Density values are traceable to the Primary Standard of pure water at 20°C as adopted by NIST. Temperature values are traceable via National Standards to the ITS-90 temperature scale.Color and Shape:LiquidReagecon Brix Standard (Stabilised) 5% at 20°C
Reagecon's Brix Standard (Stabilised) 5% at 20°C is a high quality product; with an extended shelf life to be used either as a calibrant or analytical control material for use in Refractive Index based methods for Brix determination. This product can be used on any make or model of refractometer. The product is tested using a state of the art refractometer; manufactured gravimetrically and is traceable. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.03) for the test method used to certify this product (TPR1A 01). - Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.03) for testing Refractive Index (Brix standards) using refractometry. This product has an uncertainty of measurement of ± 0.11%. It is stable for one year; either opened or unopened and is presented in a convenient 15ml dropper bottle. The product is prepared gravimetrically on a weight/weight basis. Both solute and solvent are weighed on a balance calibrated by OIML traceable weights. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - High accuracy (± 0.11%) - Tested using a state of the art RefractometerColor and Shape:LiquidReagecon Ion Chromatography (IC) Multi Element Cation Standard (5 Elements) in Water (H₂O)
Reagecon's Ion Chromatography (IC) Multi Element Cation Standard (5 Elements) in H₂O is manufactured from ultra-pure salts. This product is manufactured gravimetrically. Prior to bottling; the final product is tested and verified using a state of the art ion chromatograph and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment; using ultra-pure water (specially treated for the production of ion chromatography standards) and triple leached pre-cleaned bottles. All of the uncertainties of measurement for the product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level. Description | Concentration: - Calcium (Ca): 10 µg/mL (ppm). - Potassium (K): 10 µg/mL (ppm). - Magnesium (Mg): 10 µg/mL (ppm). - Sodium (Na): 10 µg/mL (ppm). - Ammonium (NH₄): 10 µg/mL (ppm).Color and Shape:LiquidReagecon pH 2.00 Mercury Free Buffer Solution at 25°C
Reagecon’s Mercury Free pH Buffer Solution at 25°C is tested by our ISO 17025 Accredited Test Method (A2LA Ref: 6739.03) and NIST traceable.Color and Shape:LiquidReagecon Potassium Hydroxide 0.1M (0.1N) in Ethanol Analytical Volumetric Solution (AVL) Non Aqueous Titrant
Reagecon's Potassium Hydroxide 0.1M (0.1N) in Ethanol Analytical Volumetric Solution (AVL) Non Aqueous Titrant is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is a fully factorised, high purity, stable product, developed and tested for acid/base titrations. This Analytical Volumetric Solution, also called titrant, standard titrant or standard solution, is tested to a specification of ± 0.1%. It is a reagent of known concentration, that is dispensed from a burette or other dispensing apparatus to a sample (analyte), until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations, or more commonly automatic titrations, to determine the end points by detection of any of several properties. Acid/Base titrations, also called neutralisation titrations, are used to determine either the amount of acid/base in a sample or the substance that can be converted to an acid/base. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stochiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Color and Shape:LiquidReagecon Density Standard Premium Range 0.6960 g/mL at 15°C
This Reagecon Density Standard Premium Range 0.6960 g/mL at 15°C is manufactured and tested in accordance with ASTM D1480-12 for testing of density or relative density (specific and API gravity). It is tested by Bingham Pycnometry and can be used as a calibration or control standard for density measurement by pycnometer, vibrational, or hydrometer (specific gravity) based techniques. - The Test Method used by Reagecon for testing density standards using Bingham Pycnometers is accredited to ISO 17025 (A2LA Ref: 6739.03). The product is prepared gravimetrically on a weight/weight basis. Both solute and solvent are weighed on a balance calibrated by OIML traceable weights. Reagecon holds ISO 17025 Accreditation for calibration of laboratory balances (A2LA Ref: 6739.02). The density of the product is established and tested using high performance calibrated reference pycnometers. - High accuracy (± 0.00077 g/ml) - Tested using a Fundamental Measurement Technique (Bingham Pycnometer)Color and Shape:LiquidReagecon R6 Colour Reference Solution according to European Pharmacopoeia (EP)
Reagecon’s R6 Colour Reference Solution is formulated as a reference solution for the examination of the degree of colouration of liquids in accordance with the European Pharmacopoeia Chapter 2.2.2. This product is produced by combining Reagecon Primary Colour Solutions. - Concentration verified using a high performance spectrophotometerColor and Shape:LiquidReagecon pH 13.00 Buffer Solution at 20°C
Reagecon’s pH Buffer Solution at 20°C is tested by our ISO 17025 Accredited Test Method (A2LA Ref: 6739.03) and NIST traceable.Color and Shape:LiquidReagecon Potassium Hydroxide 0.1M in Methanol according to Chinese Pharmacopoeia (ChP)
Reagecon's Potassium Hydroxide 0.1M in Methanol according to Chinese Pharmacopoeia (ChP) is a fully factorised, high purity, stable product, developed and tested for titrations. This is an Analytical Volumetric Solution, also called titrant, standard titrant or standard solution. It is a reagent of known concentration, that is dispensed from a burette or other dispensing apparatus to a sample (analyte), until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations, or more commonly automatic titrations also called potentiometric titration, to determine the end points by detection of any of several properties as detailed in several ChP monographs. - NIST Traceable - Titration is a rapid, economical and versatile analytical tool. This Reagecon Analytical Volumetric Solution is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stochiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Color and Shape:LiquidReagecon ICP, ICP-MS Multi Element Standard (3 Elements) in 2% Nitric Acid (HNO₃), ICH Q3D Parenteral Class 2B
Reagecon’s Multi Element Standard for ICP; ICP-MS in 2% HNO₃ is manufactured from ultra-pure metals or salts. This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level. Description | Concentration: - Selenium (Se): 80 µg/mL (ppm). - Silver (Ag): 15 µg/mL (ppm). - Thallium (Tl): 8 µg/mL (ppm).Color and Shape:LiquidReagecon Hydrochloric Acid 2.0M (2.0N) Analytical Volumetric Solution (AVL)
Reagecon's Hydrochloric Acid 2.0M (2.0N) Analytical Volumetric Solution (AVL) is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is a fully factorised; high purity; stable product; developed and tested for acid/base titrations. This Analytical Volumetric Solution; also called titrant; standard titrant or standard solution; is tested to a specification of ± 0.1%. It is a reagent of known concentration; that is dispensed from a burette or other dispensing apparatus to a sample (analyte); until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations; or more commonly automatic titrations; to determine the end points by detection of any of several properties. Acid/base titrations; also called neutralisation titrations; are used to determine either the amount of acid/base in a sample or the substance that can be converted to an acid/base. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stoichiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Color and Shape:LiquidReagecon ICP, ICP-MS Multi Element Standard (7 Elements) in 5% Nitric Acid (HNO₃)
Reagecon’s Multi Element Standards for ICP; ICP-MS in 5% HNO₃ is manufactured from ultra-pure metals or salts. This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level. Description | Concentration: - Bismuth (Bi): 100 µg/mL (ppm). - Gallium (Ga): 100 µg/mL (ppm). - Indium (In): 100 µg/mL (ppm). - Lithium (Li): 100 µg/mL (ppm). - Scandium (Sc): 100 µg/mL (ppm). - Terbium (Tb): 100 µg/mL (ppm). - Yttrium (Y): 100 µg/mL (ppm).Color and Shape:LiquidReagecon Refractive Index Standard (Solvent Based) 1.40485 nD units at 20°C
CAS:Reagecon's Refractive Index Standards (Solvent Based) 1.40485 nD at 20°C is a high quality product; with an extended shelf life to be used either as a calibrant or analytical control material for use in Refractive Index based methods for Refractive Index determination. This product can be used on any make or model of refractometer. The product is tested using a state of the art refractometer; manufactured gravimetrically and is traceable. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.03) for the test method. - Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.03) for testing Refractive Index (Brix standards) using refractometry. This product has an uncertainty of measurement of ± 0.00014 nD units. It is stable for two years; either opened or unopened and is presented in a convenient 15ml dropper bottle. The product is prepared gravimetrically on a weight/weight basis. Both solute and solvent are weighed on a balance calibrated by OIML traceable weights. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - High accuracy (± 0.00014 nD units) - Tested using a state of the art RefractometerColor and Shape:LiquidReagecon Refractive Index Standard (Stabilised Sucrose) 1.39032 nD units at 20°C
Reagecon's Refractive Index Standard (Stabilised Sucrose) 1.39032 nD units at 20°C is a high quality product, with an extended shelf life to be used either as a calibrant or analytical control material for use in Refractive Index based methods for Refractive Index determination. This product can be used on any make or model of refractometer. The product is tested using a state of the art refractometer, manufactured gravimetrically and is traceable. Reagecon holds ISO 17025 accreditation for the test method used to certify this product. - Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.03) for testing Refractive Index (Brix standards) using refractometry. This product has an uncertainty of measurement of ± 0.00014 nD units. It is stable for one year; either opened or unopened and is presented in a convenient 15ml dropper bottle. The product is prepared gravimetrically on a weight/weight basis. Both solute and solvent are weighed on a balance calibrated by OIML traceable weights. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - High accuracy (± 0.00014 nD units) - Tested using a state of the art RefractometerColor and Shape:LiquidReagecon Ammonium Chloride Solution NH4 10 µg/mL according to Chinese Pharmacopoeia (ChP) Limit Tests
Reagecon's Ammonium Chloride Solution NH4 10 µg/mL is a high purity stable product developed and tested for several Chinese Pharmacopoeia (ChP) applications. - This Reagecon ChP reagent is accurate, stable and reproducible. Stability is proven (either opened or unopened) for the shelf life of this product.Color and Shape:LiquidReagecon pH 7.00 Buffer Solution at 25°C in Bag-in-Box
Reagecon’s pH Buffer Solution at 25°C is tested by our ISO 17025 Accredited Test Method (A2LA Ref: 6739.03) and NIST traceable.Color and Shape:LiquidReagecon Potassium Phosphate pH 6.8 and 1.0% Sodium Dodecyl Sulphate Dissolution Media in accordance to United States (USP) and European Pharmacopoeias (EP) Concentrate
Reagecon's Potassium Phosphate pH 6.8 and 1.0% Sodium Dodecyl Sulphate Dissolution Media Concentrate is presented in concentrate form. This concentrate measures 961.5ml in volume in each bottle and the contents of each bottle can be diluted to produce 25L of working solution in water. This diluted volume is the working Dissolution Medium. The product is prepared and when diluted can be used in accordance with relevant pharmacopoeia requirements. - This product is presented as a concentrate in order to facilitate easy shipping, storage and handling. - The pack contains 6 bottles, each of which has a volume of 961.5ml of solution, each 961.5ml bottle is diluted to give 25L of ready to use Dissolution Medium.Color and Shape:LiquidReagecon Boron Standard for Atomic Absorption (AAS) 10,000 µg/mL (10,000 ppm) in Water (H₂O)
Reagecon's Boron Standard for Atomic Absorption (AAS) 10;000 µg/mL in Water (H₂O) is manufactured from very pure metal or salt (at least 99.9%). This product is manufactured gravimetrically. Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; to a specification of ± 0.2%. The results are reported in mg/L on the basis of weight). Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards). The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.Color and Shape:LiquidReagecon Spectrophotometry Stray Light Inorganic Cut-off Filter Set - Potassium Chloride, Sodium Iodide, Sodium Nitrite with Blank (Ph. Eur)
Reagecon's Spectrophotometry Stray Light Inorganic Cut-off Filter Set is formulated to give zero absorbance at wavelength. This standard is used to indicate to the analyst that the instrument is measuring light omitted from a source, other than through the sample cuvette.Color and Shape:LiquidReagecon Acetate Buffer pH 5.8 Dissolution Media in accordance to European Pharmacopoeia (EP)
Reagecon's Acetate Buffer pH 5.8 Dissolution Media is a ready to use solution, specifically formulated to perform dissolution studies on solid form pharmaceutical preparations. The product is prepared in accordance with relevant Pharmacopoeia requirements, without any deviations in materials or methodology from the Pharmacopoeia methods. - The product has the reported accuracy and guaranteed stability of 2 years.Color and Shape:LiquidReagecon Acetate Buffer pH 4.5 Dissolution Media in accordance to United States (USP) and European Pharmacopoeias (EP) Concentrate
Reagecon's Acetate Buffer pH 4.5 Dissolution Media Concentrate is presented in concentrate form. This concentrate measures 250ml in volume in each bottle and the contents of each bottle can be diluted to produce 10L of working solution in water. This diluted volume is the working Dissolution Medium. The product is prepared and when diluted can be used in accordance with relevant pharmacopoeia requirements. - This product is presented as a concentrate in order to facilitate easy shipping, storage and handling. - The pack contains 12 bottles, each of which has a volume of 250ml of solution, each 250ml bottle is diluted to give 10L of ready to use Dissolution Medium.Color and Shape:LiquidReagecon Sodium Hydroxide 1.0M (1.0N) Low in Carbonate Analytical Volumetric Solution (AVL)
Reagecon's Sodium Hydroxide 1.0M (1.0N) Analytical Volumetric Solution (AVL) is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is a fully factorised; high purity; stable product; developed and tested for acid/base titrations. This Analytical Volumetric Solution; also called titrant; standard titrant or standard solution; is tested to a specification of ± 0.1%. It is a reagent of known concentration; that is dispensed from a burette or other dispensing apparatus to a sample (analyte); until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations; or more commonly automatic titrations; to determine the end points by detection of any of several properties. Acid/base titrations; also called neutralisation titrations; are used to determine either the amount of acid/base in a sample or the substance that can be converted to an acid/base. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stoichiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Color and Shape:LiquidReagecon Brix Standard (Stabilised) 20% at 20°C
Reagecon's Brix Standard (Stabilised) 20% at 20°C is a high quality product; with an extended shelf life to be used either as a calibrant or analytical control material for use in Refractive Index based methods for Brix determination. This product can be used on any make or model of refractometer. The product is tested using a state of the art refractometer; manufactured gravimetrically and is traceable. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.03) for the test method used to certify this product (TPR1A 01). - Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.03) for testing Refractive Index (Brix standards) using refractometry. This product has an uncertainty of measurement of ± 0.11%. It is stable for one year; either opened or unopened and is presented in a convenient 15ml dropper bottle. The product is prepared gravimetrically on a weight/weight basis. Both solute and solvent are weighed on a balance calibrated by OIML traceable weights. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - High accuracy (± 0.11%) - Tested using a state of the art RefractometerColor and Shape:LiquidReagecon Tin Standard for ICP, ICP-MS 1000 µg/mL (1000 ppm) in 1% Hydrofluoric Acid (HF) and 5% Nitric Acid (HNO₃)
Reagecon's Tin Standard for ICP; ICP-MS 1000 µg/mL (1000 ppm) in 1% Hydrofluoric Acid (HF) and 5% Nitric Acid (HNO₃) for ICP or ICP-MS is manufactured from ultra-pure metal (99.999%). This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. To a specification of ± 0.2%. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.Color and Shape:LiquidReagecon Spectrophotometry Stray Light Blank - Aqueous
Reagecon’s Spectrophotometry Stray Light Blank - Aqueous Standard is used to indicate to the analyst that the instrument is measuring light omitted from a source, other than through the sample cuvette.Color and Shape:LiquidReagecon Palladium Standard for Atomic Absorption (AAS) 1000 µg/mL (1000 ppm) in 1M Hydrochloric Acid (HCI)
Reagecon's Palladium Standard for Atomic Absorption (AAS) 1000 µg/mL in 1M Hydrochloric Acid (HCI) is manufactured from very pure metal or salt (at least 99.9%). This product is manufactured gravimetrically. Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; to a specification of ± 0.2%. The results are reported in mg/L on the basis of weight). Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards). The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.Color and Shape:LiquidReagecon Spectrophotometry Caffeine Absorbance/Transmission (Linearity) Standard 10 mg/L (2ml)
Reagecon Spectrophotometry Caffeine Absorbance/Transmission (Linearity) Standard 10 mg/L is a standard which gives a spectral scan at various wavelengths. - ACCREDITED CALIBRATION: Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for the calibration of laboratory balances. This accreditation underscores our commitment to quality and reliability.Color and Shape:LiquidReagecon ICP, ICP-MS Multi Element Standard (9 Elements) in 1.2% v/v Nitric Acid (HNO₃)
Pricing displayed is Nett. For order quantities above 4 units, ask your sales contact for a quotation. Reagecon’s Multi Element Standards for ICP; ICP-MS in 1.2% v/v Nitric Acid (HNO₃) is manufactured from ultra-pure metals or salts. This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level. Description | Concentration: - Calcium (Ca): 10 µg/mL (ppm). - Phosphorus (P): 10 µg/mL (ppm). - Magnesium (Mg): 10 µg/mL (ppm). - Sodium (Na): 10 µg/mL (ppm). - Cobalt (Co): 10 µg/mL (ppm). - Copper (Cu): 10 µg/mL (ppm). - Iron (Fe): 10 µg/mL (ppm). - Manganese (Mn): 10 µg/mL (ppm). - Zinc (Zn): 10 µg/mL (ppm).Color and Shape:LiquidReagecon Potassium Dichromate Solution according to European Pharmacopoeia (EP) Chapter 4 (4.1.1)
CAS:Reagecon Potassium Dichromate Solution is a high purity stable product developed and tested for European Pharmacopoeia (EP) applications. These include use as a reagent in the performance of tests outlined in several EP monographs. - This Reagecon EP reagent is accurate, stable and reproducible. Stability is proven (either opened or unopened) for the shelf life of this product.Color and Shape:LiquidReagecon Sodium Hydroxide 0.1M (0.1N) Analytical Volumetric Solution (AVL)
Reagecon's Sodium Hydroxide 0.1M (0.1N) Analytical Volumetric Solution (AVL) is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is a fully factorised; high purity; stable product; developed and tested for acid/base titrations. This Analytical Volumetric Solution; also called titrant; standard titrant or standard solution; is tested to a specification of ± 0.1%. It is a reagent of known concentration; that is dispensed from a burette or other dispensing apparatus to a sample (analyte); until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations; or more commonly automatic titrations; to determine the end points by detection of any of several properties. Acid/base titrations; also called neutralisation titrations; are used to determine either the amount of acid/base in a sample or the substance that can be converted to an acid/base. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stoichiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Color and Shape:LiquidReagecon Sodium Nitrite 0.1M according to Chinese Pharmacopoeia (ChP)
Reagecon's Sodium Nitrite 0.1M is a fully factorised, high purity, stable product, developed and tested for titrations. This is an Analytical Volumetric Solution, also called titrant, standard titrant or standard solution. It is a reagent of known concentration, that is dispensed from a burette or other dispensing apparatus to a sample (analyte), until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations, or more commonly automatic titrations also called potentiometric titration, to determine the end points by detection of any of several properties as detailed in several ChP monographs. - NIST Traceable - Titration is a rapid, economical and versatile analytical tool. This Reagecon Analytical Volumetric Solution is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stochiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Color and Shape:LiquidReagecon Potassium 1000ppm Ion Selective Electrode Standard
Reagecon's Potassium 1000ppm Ion Selective Electrode Standard can be used at suitable concentrations to calibrate or control measurements that use Ion Selective Electrodes (ISE’s) as the sensing technology. - Reagecon’s Ion Selective Electrode (ISE) Standards; diluted to a suitable concentration; are particularly suitable for use as a calibration or control material; using Ion Selective Electrodes as the sensing technology. - Accurate to ± 0.5%. - Aqueous matrix. - Directly traceable to NIST standard reference materials. - Can be used for Method Validation or Instrument Qualification. - Can also be used as a calibrant for other techniques. - Safe; compatible with all types of ISE Electrodes. - Manufactured to exacting specifications with an extended shelf life & stability; even after opening the bottle.Color and Shape:LiquidReagecon ICP, ICP-MS Multi Element Standard (9 Elements) in 2-5% Nitric Acid (HNO₃) and trace Hydrofluoric Acid (HF), IP501 Compliant
Reagecon's ICP; ICP-MS Multi Element Standard in 2-5% HNO₃ and trace HF is manufactured from ultra-pure metals or salts. This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 (A2LA Ref: 6739.02) accreditation for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level. Description | Concentration: - Aluminum (Al): 1000 µg/mL (ppm). - Calcium (Ca): 1000 µg/mL (ppm). - Iron (Fe): 1000 µg/mL (ppm). - Sodium (Na): 1000 µg/mL (ppm). - Nickel (Ni): 1000 µg/mL (ppm). - Phosphorus (P): 1000 µg/mL (ppm). - Silicon (Si): 1000 µg/mL (ppm). - Vanadium (V): 1000 µg/mL (ppm). - Zinc (Zn): 1000 µg/mL (ppm).Color and Shape:LiquidReagecon Sodium Hydroxide 0.25M (0.25N) Analytical Volumetric Solution (AVL)
Reagecon's Sodium Hydroxide 0.25M (0.25N) Analytical Volumetric Solution (AVL) is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is a fully factorised; high purity; stable product; developed and tested for acid/base titrations. This Analytical Volumetric Solution; also called titrant; standard titrant or standard solution; is tested to a specification of ± 0.1%. It is a reagent of known concentration; that is dispensed from a burette or other dispensing apparatus to a sample (analyte); until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations; or more commonly automatic titrations; to determine the end points by detection of any of several properties. Acid/base titrations; also called neutralisation titrations; are used to determine either the amount of acid/base in a sample or the substance that can be converted to an acid/base. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stoichiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.Color and Shape:LiquidReagecon Ion Chromatography (IC) Multi Element Cation Standard (3 Elements) in Water (H₂O) and trace Nitric Acid (HNO₃)
Pricing displayed is Nett. For order quantities above 4 units, ask your sales contact for a quotation. Reagecon's Ion Chromatography (IC) Multi Element Cation Standard (3 Elements) in H₂O and trace HNO₃ is manufactured from ultra-pure salts. This product is manufactured gravimetrically. Prior to bottling; the final product is tested and verified using a state of the art ion chromatograph and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment; using ultra-pure water (specially treated for the production of ion chromatography standards) and triple leached pre-cleaned bottles. All of the uncertainties of measurement for the product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level. Description | Concentration: - Sodium (Na): 200 µg/mL (ppm). - Potassium (K): 10 µg/mL (ppm). - Magnesium (Mg): 2 µg/mL (ppm).Color and Shape:LiquidReagecon Phloroglucinol TS Solution according to United States Pharmacopoeia (USP)
Reagecon's Phloroglucinol TS Solution according to United States Pharmacopoeia (USP) is specified for use in individual United States Pharmacopoeia (USP) Monographs. It is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03); is NIST traceable and has guaranteed stability throughout its entire shelf life; even after opening the bottle.
Color and Shape:LiquidReagecon Zirconium Standard for ICP, ICP-MS 1000 µg/mL (1000 ppm) in 1% Hydrofluoric Acid (HF) and 5% Nitric Acid (HNO₃)
Reagecon's Zirconium Standard for ICP; ICP-MS 1000 µg/mL (1000 ppm) in 1% Hydrofluoric Acid (HF) and 5% Nitric Acid (HNO₃) for ICP or ICP-MS is manufactured from ultra-pure metal (99.999%). This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. To a specification of ± 0.2%. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances.
- GHS/OSHA compliant, REACH
- This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.Color and Shape:LiquidReagecon pH 6.86 at 25°C Equimolal Phosphate 0.05M according to United States Pharmacopoeia (USP)
Reagecon's pH 6.86 at 25°C Equimolal Phosphate 0.05M according to United States Pharmacopoeia (USP) is specified for use in individual United States Pharmacopoeia (USP) Monographs. It is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03); is NIST traceable and has guaranteed stability throughout its entire shelf life; even after opening the bottle.
Color and Shape:LiquidReagecon Sulphide 1000ppm Ion Selective Electrode Standard
Reagecon's Sulphide 1000ppm Ion Selective Electrode Standard can be used at suitable concentrations to calibrate or control measurements that use Ion Selective Electrodes (ISE’s) as the sensing technology.
- Reagecon’s Ion Selective Electrode (ISE) Standards; diluted to a suitable concentration; are particularly suitable for use as a calibration or control material; using Ion Selective Electrodes as the sensing technology.
- Accurate to ± 0.5%.
- Aqueous matrix.
- Directly traceable to NIST standard reference materials.
- Can be used for Method Validation or Instrument Qualification.
- Can also be used as a calibrant for other techniques.
- Safe; compatible with all types of ISE Electrodes.
- Manufactured to exacting specifications with an extended shelf life & stability; even after opening the bottle.Color and Shape:LiquidReagecon Bromothymol Blue R3 Solution according to European Pharmacopoeia (EP) Chapter 4 (4.1.1)
Reagecon's Bromothymol Blue R3 Solution is a high quality Indicator Solution produced from the highest quality raw materials and manufactured and tested under rigorous conditions. For manual titrations; indicator titrant or analyte change colour and this colour change is by far the most important method of end point detection, in such titrations. A high quality indicator solution such as Reagecon's facilitates end point detection, in a clear and unambiguous manner and is an imperative for accurate manual titrimetry.
Color and Shape:LiquidReagecon Nitrate Standard for Ion Chromatography (IC) 20 mg/L (20 ppm) in Water (H₂O)
Reagecon's Nitrate Standard for Ion Chromatography (IC) 20 mg/L (20 ppm) in H₂O is manufactured from ultra-pure material. This product is manufactured gravimetrically. Prior to bottling; the final product is tested and verified using a state of the art ion chromatograph and is reported using the gravimetric result; corrected for density; to a specification of ± 0.2%. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances.
- GHS/OSHA compliant, REACH
- This product is produced in a highly controlled cleanroom (ISO 7) environment; using ultra-pure water (specially treated for the production of ion chromatography standards) and triple leached pre-cleaned bottles. All of the uncertainties of measurement for the product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.Color and Shape:LiquidReagecon Zirconium Standard for ICP, ICP-MS 10,000 µg/mL (10,000 ppm) in 5% Nitric Acid (HNO₃) and 1% Hydrofluoric Acid (HF)
Reagecon's Zirconium Standard for ICP; ICP-MS 10;000 µg/mL (10;000 ppm) in 2-5% Nitric Acid (HNO₃) for ICP or ICP-MS is manufactured from ultra-pure metal (99.999%). This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. To a specification of ± 0.2%. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances.
- GHS/OSHA compliant, REACH
- This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.Color and Shape:LiquidReagecon 1.0 mg/L C from NIST Sucrose Total Organic Carbon (TOC) Standard for Swan Analytical Analyser
Reagecon's 1.0 mg/L C from NIST Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product
- This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.Color and Shape:LiquidReagecon Sodium Sulphide Solution according to European Pharmacopoeia (EP) Chapter 4 (4.1.1)
Reagecon Sodium Sulphide Solution is a high purity stable product developed and tested for European Pharmacopoeia (EP) applications. These include the preparation of other reagents (4.1.1), use in identification reactions of ions and functional groups (2.3.1) and used as a reagent in the performance of tests outlined in several EP monographs.
- NIST traceable
- This Reagecon EP reagent is accurate, stable and reproducible. Stability is proven (either opened or unopened) for the shelf life of this product.Color and Shape:LiquidReagecon ICP, ICP-MS Multi Element Standard (18 Elements) in 2-5% Nitric Acid (HNO₃) and 0.04% Hydrofluoric Acid (HF)
Pricing displayed is Nett. For order quantities above 4 units, ask your sales contact for a quotation.
Reagecon's Multi Element Standard for ICP; ICP-MS in 2-5%Nitric Acid (HNO₃) and 0.04% Hydrofluoric Acid (HF) is manufactured from ultra-pure metals or salts. This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 (A2LA Ref: 6739.02) accreditation for calibration of laboratory balances.
- GHS/OSHA compliant, REACH
- This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.
Description | Concentration:
- Arsenic (As): 100 µg/mL (ppm).
- Barium (Ba): 100 µg/mL (ppm).
- Cadmium (Cd): 100 µg/mL (ppm).
- Cobalt (Co): 100 µg/mL (ppm).
- Chromium (Cr): 100 µg/mL (ppm).
- Copper (Cu): 100 µg/mL (ppm).
- Manganese (Mn): 100 µg/mL (ppm).
- Molybdenum (Mo): 100 µg/mL (ppm).
- Nickel (Ni): 100 µg/mL (ppm).
- Lead (Pb): 100 µg/mL (ppm).
- Antimony (Sb): 100 µg/mL (ppm).
- Selenium (Se): 100 µg/mL (ppm).
- Tin (Sn): 100 µg/mL (ppm).
- Strontium (Sr): 100 µg/mL (ppm).
- Titanium (Ti): 100 µg/mL (ppm).
- Thallium (Tl): 100 µg/mL (ppm).
- Vanadium (V): 100 µg/mL (ppm).
- Zinc (Zn): 100 µg/mL (ppm).Color and Shape:LiquidReagecon Zirconium Standard for ICP, ICP-MS 100 µg/mL (100 ppm) in 1% Hydrofluoric Acid (HF) and 5% Nitric Acid (HNO₃)
Reagecon's Zirconium Standard for ICP; ICP-MS 100 µg/mL (100 ppm) in 1% Hydrofluoric Acid (HF) and 5% Nitric Acid (HNO₃) for ICP or ICP-MS is manufactured from ultra-pure metal (99.999%). This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. To a specification of ± 0.2%. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances.
- GHS/OSHA compliant, REACH
- This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.Color and Shape:LiquidReagecon Phloroglucinol TS Solution according to United States Pharmacopoeia (USP)
Reagecon's Phloroglucinol TS Solution according to United States Pharmacopoeia (USP) is specified for use in individual United States Pharmacopoeia (USP) Monographs. It is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03); is NIST traceable and has guaranteed stability throughout its entire shelf life; even after opening the bottle.
Color and Shape:LiquidReagecon ICP, ICP-MS Multi Element Standard (18 Elements) in 2-5% Nitric Acid (HNO₃) and 0.4% Hydrofluoric Acid (HF)
Pricing displayed is Nett. For order quantities above 4 units, ask your sales contact for a quotation.
Reagecon’s Multi Element Standard for ICP; ICP-MS in 2-5% HNO₃ and trace 0.4% HF is manufactured from ultra-pure metals or salts. This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 (A2LA Ref: 6739.02) accreditation for calibration of laboratory balances.
- GHS/OSHA compliant, REACH
- This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.
Description | Concentration:
- Arsenic (As): 1000 µg/mL (ppm).
- Barium (Ba): 1000 µg/mL (ppm).
- Cadmium (Cd): 1000 µg/mL (ppm).
- Cobalt (Co): 1000 µg/mL (ppm).
- Chromium (Cr): 1000 µg/mL (ppm).
- Copper (Cu): 1000 µg/mL (ppm).
- Manganese (Mn): 1000 µg/mL (ppm).
- Molybdenum (Mo): 1000 µg/mL (ppm).
- Nickel (Ni): 1000 µg/mL (ppm).
- Lead (Pb): 1000 µg/mL (ppm).
- Antimony (Sb): 1000 µg/mL (ppm).
- Selenium (Se): 1000 µg/mL (ppm).
- Tin (Sn): 1000 µg/mL (ppm).
- Strontium (Sr): 1000 µg/mL (ppm).
- Titanium (Ti): 1000 µg/mL (ppm).
- Thallium (Tl): 1000 µg/mL (ppm).
- Vanadium (V): 1000 µg/mL (ppm).
- Zinc (Zn): 1000 µg/mL (ppm).Color and Shape:LiquidReagecon ICP, ICP-MS Multi Element Standard (29 Elements) in 2-5% Nitric Acid (HNO₃) and trace Hydrofluoric Acid (HF)
Pricing displayed is Nett. For order quantities above 4 units, ask your sales contact for a quotation.
Reagecon's Multi Element Standard for ICP; ICP-MS in 2-5% Nitric Acid (HNO₃) and trace Hydrofluoric Acid (HF) is manufactured from ultra-pure metals or salts. This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 (A2LA Ref: 6739.02) accreditation for calibration of laboratory balances.
- GHS/OSHA compliant, REACH
- This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.
Description | Concentration:
- Aluminium (Al): 100 µg/mL (ppm).
- Antimony (Sb): 100 µg/mL (ppm).
- Arsenic (As): 100 µg/mL (ppm).
- Barium (Ba): 100 µg/mL (ppm).
- Bismuth (Bi): 100 µg/mL (ppm).
- Boron (B): 100 µg/mL (ppm).
- Cadmium (Cd): 100 µg/mL (ppm).
- Calcium (Ca): 100 µg/mL (ppm).
- Chromium (Cr): 100 µg/mL (ppm).
- Cobalt (Co): 100 µg/mL (ppm).
- Copper (Cu): 100 µg/mL (ppm).
- Gallium (Ga): 100 µg/mL (ppm).
- Hafnium (Hf): 100 µg/mL (ppm).
- Indium (In): 100 µg/mL (ppm).
- Iron (Fe): 100 µg/mL (ppm).
- Lead (Pb): 100 µg/mL (ppm).
- Lithium (Li): 100 µg/mL (ppm).
- Magnesium (Mg): 100 µg/mL (ppm).
- Manganese (Mn): 100 µg/mL (ppm).
- Molybdenum (Mo): 100 µg/mL (ppm).
- Nickel (Ni): 100 µg/mL (ppm).
- Potassium (K): 100 µg/mL (ppm).
- Silver (Ag): 100 µg/mL (ppm).
- Sodium (Na): 100 µg/mL (ppm).
- Strontium (Sr): 100 µg/mL (ppm).
- Thallium (Tl): 100 µg/mL (ppm).
- Titanium (Ti): 100 µg/mL (ppm).
- Tungsten (W): 100 µg/mL (ppm).
- Zinc (Zn): 100 µg/mL (ppm).Color and Shape:Liquid
