Physicochemical Standards

Reagecon's S6 Kinematic Viscosity, Dynamic Viscosity and Density Standard can be used to calibrate, control or validate all types of viscometers including capillary, flow cup, rotational, falling ball, falling/rising object, stabinger and vibrational viscometers.This Viscosity Standard and all Reagecon Viscosity Standards are reported to 4 significant figures on their Certificate of Analysis.Only 2 significant figures are shown here for expediency of layout.   - This product has been tested according to ASTM method D 2162 for Kinematic Viscosity using Ubbelohde Master Viscometers. - The Density has been tested in accordance with ASTM method D4052 (Kinematic Viscosity x Density = Dynamic Viscosity). - Kinematic Viscosity values and Density values are traceable to the Primary Standard of pure water at 20°C as adopted by NIST. Temperature values are traceable via National Standards to the ITS-90 temperature scale.

Reagecon's Ferric Ammonium Sulfate TS Solution according to United States Pharmacopoeia (USP) is specified for use in individual United States Pharmacopoeia (USP) Monographs. It is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03); is NIST traceable and has guaranteed stability throughout its entire shelf life; even after opening the bottle.

Reagecon's Bromophenol Blue Indicator 0.04% Solution is a high quality Indicator Solution produced from the highest quality raw materials and manufactured and tested under rigorous conditions. For manual titrations; indicator titrant or analyte change colour and this colour change is by far the most important method of end point detection, in such titrations. A high quality indicator solution such as Reagecon's Bromophenol Blue Indicator 0.04% Solution facilitates end point detection, in a clear and unambiguous manner and is an imperative for accurate manual titrimetry.

Reagecon's Conductivity Standard at 25°C is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03) and NIST traceable. The product is aqueous based; non-hazardous and accurate to a specification of ± 1%. - To enable analysts to achieve the correct result when measuring conductivity and to prove the correctness of that result; Reagecon has developed a high quality range of Conductivity Standards; which can be used for calibration of conductivity senors; quality control; method validation and instrument qualification. - Reagecon Conductivity Standards are aqueous based; thereby eliminating any errors attributable to matrix mismatch. - Directly traceable to NIST standard reference materials; meets the specification requirements of all the major Pharmacopoeias. - Each bottle is supplied with a comprehensive Certificate of Analysis and has a table of conductivity variation with temperature available via the product label; as are lot numbers and expiry dates for user convenience. - The low temperature coefficient of variation; reduces measurement errors and enables non-temperature controlled use and is suitable for field work. - High accuracy ± 1% at 25°C; enables the standards to be used as calibrators and/or controls; in accordance with the most exacting industrial requirements. - Manufactured to exacting specifications with an extended shelf life and stability; even after opening the bottle thereby eliminating the requirement to open a fresh bottle of standard every time it is used.

Reagecon's Potassium Iodate 0.05M (0.3N ) Analytical Volumetric Solution (AVL) is a fully factorised, high purity, stable product, developed and tested for oxidation/reduction titrations.  This Analytical Volumetric Solution, also called titrant, standard titrant or standard solution, is tested to a specification of ± 0.1%. It is a reagent of known concentration, that is dispensed from a burette or other dispensing apparatus to a sample (analyte), until a reaction between the two liquids is judged to be complete.  The product may be used for manual titrations, or more commonly automatic titrations, to determine the end points by detection of any of several properties.  Oxidation/reduction titrations depend on changes in the electropotential of the oxidation reduction system and always involves a reaction between an oxidising and reducing pair. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stoichiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.

Reagecon's Sulphuric Acid 1.0M (2.0N) Analytical Volumetric Solution (AVL) is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is a fully factorised; high purity; stable product; developed and tested for acid/base titrations. This Analytical Volumetric Solution; also called titrant; standard titrant or standard solution; is tested to a specification of ± 0.1%. It is a reagent of known concentration; that is dispensed from a burette or other dispensing apparatus to a sample (analyte); until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations; or more commonly automatic titrations; to determine the end points by detection of any of several properties. Acid/base titrations; also called neutralisation titrations; are used to determine either the amount of acid/base in a sample or the substance that can be converted to an acid/base. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stoichiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.

Reagecon's Gardner 16 Colour Standard can be used to calibrate, control, qualify or validate colour measurement instruments. This product which is specified in ASTM D1544, D 6166, AOCS Td 1a and MS 817 Part 10 is very applicable to similarly coloured liquids including several vegetable and mineral oils.

Reagecon's Phosphorus Standard for ICP; ICP-MS 10;000 µg/mL (10;000 ppm) in 2-5% Nitric Acid (HNO₃) for ICP or ICP-MS is manufactured from ultra-pure metal (99.999%). This product is manufactured gravimetrically using the mass balance approach: 100% less the sum of all impurities (w/w). Prior to bottling; the final product is tested and verified using ICP-MS and is reported using the gravimetric result; corrected for density. To a specification of ± 0.2%. The results are reported in mg/kg and mg/L on the basis of weight and density. Reagecon hold ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. - GHS/OSHA compliant, REACH - This product is produced in a highly controlled cleanroom (ISO 7) environment, using ultra-pure water (specially treated for the production of mass spectroscopy standards), triple distilled acids and triple leached pre-cleaned bottles. The titrimetry and spectroscopy are controlled and calibrated using separate standards, so the product comes with two layers of traceability including NIST Standards, where available. All of the uncertainties of measurement for this product are calculated according to Eurachem/CITAC guidelines and reported as expanded uncertainties at the 95% confidence level.

This Reagecon Density Standard Quality Range 0.6878 g/mL at 25°C is manufactured and tested in accordance with ASTM D4052 for testing of density or relative density (specific and API gravity). It is tested by vibrational densitometer and can be used as a calibration or control standard for density measurement by vibrational or hydrometer (specific gravity) based techniques. - The Test Method used by Reagecon for testing density standards using vibrational densitometers is accredited to ISO 17025 (A2LA Ref: 6739.03). The product is prepared gravimetrically on a weight/weight basis. Both solute and solvent are weighed on a balance calibrated by OIML traceable weights. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The density of the product is established and tested using high performance calibrated vibrational densitometers. - High accuracy ± 0.16%

Reagecon's Sodium Hydroxide 0.5M (0.5N) Analytical Volumetric Solution (AVL) is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is a fully factorised; high purity; stable product; developed and tested for acid/base titrations. This Analytical Volumetric Solution; also called titrant; standard titrant or standard solution; is tested to a specification of ± 0.1%. It is a reagent of known concentration; that is dispensed from a burette or other dispensing apparatus to a sample (analyte); until a reaction between the two liquids is judged to be complete. The product may be used for manual titrations; or more commonly automatic titrations; to determine the end points by detection of any of several properties. Acid/base titrations; also called neutralisation titrations; are used to determine either the amount of acid/base in a sample or the substance that can be converted to an acid/base. - Titration is a rapid, economical and versatile analytical tool. This Reagecon titrant is accurate, stable, reproducible and fully factorised. Titrations performed with this product, exhibit defined stoichiometry, are quantitative, establish an equilibrium that is definitive and fast and provide unambiguous results. Stability is proven (either opened or unopened) for the shelf life of this product.

Reagecon's Potassium Chloride 0.05M Dissolution Media Concentrate is presented in concentrate form. This concentrate measures 961.5ml in volume in each bottle and the contents of each bottle can be diluted to produce 25L of working solution in water. This diluted volume is the working Dissolution Medium. The product is prepared and when diluted can be used in accordance with relevant pharmacopoeia requirements. - This product is presented as a concentrate in order to facilitate easy shipping, storage and handling. - The pack contains 6 bottles, each of which has a volume of 961.5ml of solution, each 961.5ml bottle is diluted to give 25L of ready to use Dissolution Medium.

Reagecon's Conductivity Standard at 25°C is tested by an ISO 17025 Accredited Test Method (A2LA Ref: 6739.03) and NIST traceable. The product is aqueous based; non-hazardous and accurate to a specification of ± 1%. - To enable analysts to achieve the correct result when measuring conductivity and to prove the correctness of that result; Reagecon has developed a high quality range of Conductivity Standards; which can be used for calibration of conductivity senors; quality control; method validation and instrument qualification. - Reagecon Conductivity Standards are aqueous based; thereby eliminating any errors attributable to matrix mismatch. - Directly traceable to NIST standard reference materials; meets the specification requirements of all the major Pharmacopoeias. - Each bottle is supplied with a comprehensive Certificate of Analysis and has a table of conductivity variation with temperature available via the product label; as are lot numbers and expiry dates for user convenience. - The low temperature coefficient of variation; reduces measurement errors and enables non-temperature controlled use and is suitable for field work. - High accuracy ± 1% at 25°C; enables the standards to be used as calibrators and/or controls; in accordance with the most exacting industrial requirements. - Manufactured to exacting specifications with an extended shelf life and stability; even after opening the bottle thereby eliminating the requirement to open a fresh bottle of standard every time it is used.

Reagecon's Reagent Water Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product.

Reagecon's 100 μS/cm Conductivity Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - Reagecon’s Conductivity Standard at 25°C is tested and certified by an ISO17025 Accredited Test Method (A2LA Ref. 6739.03) and NIST traceable. - This Conductivity Standard for Total Organic Carbon (TOC) Calibration is aqueous based, thereby eliminating any errors attributable to matrix mismatch. Each bottle is supplied with a comprehensive Certificate of Analysis and has a table of conductivity variation with temperature printed on the product label. The low temperature coefficient of variation, reduces measurement errors and enables non-temperature controlled use. - High accuracy ± 1% at 25°C, enables the standards to be used as calibrators and/or controls, in accordance with the most exacting industrial requirements.

Reagecon's 150 mg/L C as KHP Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's Total Organic and Inorganic Carbon (TOC/TIC) Mixed Standard 5 mg/L (ppm) is tested by our ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is manufactured from high purity raw materials and is suitable for calibrating a wide range of TOC/TIC analysers to a high accuracy. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 5%. - Produced in our dedicated TOC Laboratory. - "This product is presented in a special twin neck dosing device. This device prevents contamination; evaporation or interference." - "Manufactured to exacting specifications with an extended shelf life and stability; even after opening the bottle." - "Consistency of product – Independent; Traceable; Tested."

Reagecon's 0.5 mg/L C from NIST Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product

Reagecon's Validation Kit for Total Organic Carbon (TOC) is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - The product ISTOC1084 from the table above is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds IEC/ISO 17025 accreditation for calibration of laboratory balances (A2LA Ref: 6739.02). Products are tested using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument); ISTOC1084 is tested within the scope of Reagecon’s ISO 17025 accredited test method (A2LA Ref: 6739.03) and ISTOC1289 is not tested within the scope of the accredited test method. Item No - Description | Qty: - ISTOC1289-TOC Calibration Blank: 1. - ISTOC1084-TOC Standard 100mg/l C NIST KHP: 2.

Reagecon's 25 mg/L from NIST KHP Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's System Suitability Set to USP for Total Organic Carbon (TOC) is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - The products ISTOC1145 and ISTOC1146 from the table above are prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds IEC/ISO 17025 accreditation for calibration of laboratory balances (A2LA Ref: 6739.02). Products are tested using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument); ISTOC1145 and ISTOC1146 are tested within the scope of Reagecon’s ISO 17025 accredited test method (A2LA Ref: 6739.03) and ISTOC1144 is not tested within the scope of the accredited test method. Item No - Description | Qty: - ISTOC1144-TOC USP Reagent Water: 1. - ISTOC1145-TOC Standard 0.5mg/L C USP Sucrose: 1. - ISTOC1146-TOC Standard 0.5mg/L C USP 1,4- Benzoquinone: 1.

Reagecon's 0.5 mg/L C from USP Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product

Reagecon's Calibration Kit to C NIST Sucrose for Total Organic Carbon (TOC) is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product - The products ISTOC1275; ISTOC1276 and ISTOC1277 from the table above are prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds IEC/ISO 17025 accreditation for calibration of laboratory balances (A2LA Ref: 6739.02). Products are tested using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument); ISTOC1275; ISTOC1276 and ISTOC1277 are tested within the scope of Reagecon’s ISO 17025 accredited test method (A2LA Ref: 6739.03) and ISTOC1274 is not tested within the scope of the accredited test method. Item No - Description | Qty: - ISTOC1274-TOC Blank: 1. - ISTOC1275-TOC Standard 0.25mg/L C NIST Sucrose: 1. - ISTOC1276-TOC Standard 0.5mg/L C NIST Sucrose: 1. - ISTOC1277-TOC Standard 0.75mg/L C NIST Sucrose: 1.

Reagecon's 0.2 mg/L (200 ppb) C as Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's System Suitability Set to USP for Total Organic (TOC) is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - The products RTOCRs and RTOCRss from the table above are prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds IEC/ISO 17025 accreditation for calibration of laboratory balances (A2LA Ref: 6739.02). Products are tested using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument); RTOCRs and RTOCRss are tested within the scope of Reagecon’s ISO 17025 accredited test method (A2LA Ref: 6739.03) and RTOCW is not tested within the scope of the accredited test method. Item No - Description | Qty: - RTOCRs-TOC Standard USP Standard Sucrose Solution Rs (0.5mg/L C): 1. - RTOCRss-TOC Standard USP System Suitability Solution 1 4-Benzoquinone (0.5mg/L C): 1. - RTOCW-TOC Standard USP Reagent Water Rw: 1.

Reagecon's 0.5 mg/L C from USP 1,4- Benzoquinone Acidified with HCl Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's Sodium Dodecylbenzene Sulfonate 0.5 mg/L C in 10 mmol/L Acidified Water Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product.

Reagecon's 0.5 mg/L as Sodium Carbonate (Na₂CO₃) Total Inorganic Carbon (TIC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's 5 mg/L Non Purgeable Organic Carbon Mixed (NPOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured; cleaned and leached by a special proprietary process specifically for the product. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's Calibration Set for Total Organic Carbon (TOC) is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - The product ISTOC1257 from the table above is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds IEC/ISO 17025 accreditation for calibration of laboratory balances (A2LA Ref: 6739.02). Products are tested using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument); ISTOC1257 is tested within the scope of Reagecon’s ISO 17025 accredited test method (A2LA Ref: 6739.03) and ISTOC1184 is not tested within the scope of the accredited test method. Item No - Description | Qty: - ISTOC1184-TOC USP Reagent Water: 2. - ISTOC1257-TOC Standard 1.0mg/L C NIST Sucrose: 2.

Reagecon's 1 mg/L Total Inorganic Carbon/Total Carbon Mixed (TIC/TC) Standard with Combined Value 2 mg/L is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured; cleaned and leached by a special proprietary process specifically for the product. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's USP Reagent Water Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product.

Reagecon's Validation Kit for Wet Chemistry to NIST for Total Organic Carbon (TOC) is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - The products ISTOC1059 and ISTOC1065 from the table above are prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds IEC/ISO 17025 accreditation for calibration of laboratory balances (A2LA Ref: 6739.02). Products are tested using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument); ISTOC1059 and ISTOC1065 are tested within the scope of Reagecon’s ISO 17025 accredited test method (A2LA Ref: 6739.03) and ISTOC1288 is not tested within the scope of the accredited test method. Item No - Description | Qty: - ISTOC1288-TOC USP Reagent Water: 3. - ISTOC1059-TOC Standard 0.5mg/L C NIST KHP: 2. - ISTOC1065-TOC Standard 1mg/L C NIST KHP: 1.

Reagecon's Total Organic Carbon (TOC) Standard 1500 mg/L (ppm) is manufactured from high purity raw materials and is suitable for calibrating a wide range of TOC analysers to a high accuracy. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 0.5%. - Produced in our dedicated TOC Laboratory. - "This product is presented in a special twin neck dosing device. This device prevents contamination; evaporation or interference." - "Manufactured to exacting specifications with an extended shelf life and stability; even after opening the bottle." - "Consistency of product – Independent; Traceable; Tested."

Reagecon's 1 mg/L from NIST KHP Acidified with HCl Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's USP Reagent Water Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product.

Reagecon's 0.5 mg/L C from USP Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's 500 mg/L C as Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's 0.5 mg/L C from NIST Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product

Reagecon's 4 mg/L C as Potassium Hydrogen Phthalate Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's JP Reagent Water Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product.

Reagecon's Total Organic Carbon (TOC) Standard 30 mg/L (ppm) is tested by our ISO 17025 Accredited Test Method (A2LA Ref: 6739.03). This product is manufactured from high purity raw materials and is suitable for calibrating a wide range of TOC analysers to a high accuracy. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 5%. - Produced in our dedicated TOC Laboratory. - Presented and packed in specially cleaned and leached amber glass bottles. - "Manufactured to exacting specifications with an extended shelf life and stability; even after opening the bottle." - "Consistency of product – Independent; Traceable; Tested."

Reagecon's Calibration Blank Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product.

Reagecon's Validation Kit to C NIST Sucrose for Total Organic Carbon (TOC) is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - The products ISTOC1081; ISTOC1082 and ISTOC1083 from the table above are prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds IEC/ISO 17025 accreditation for calibration of laboratory balances (A2LA Ref: 6739.02). Products are tested using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument); ISTOC1081; ISTOC1082 and ISTOC1083 are tested within the scope of Reagecon’s ISO 17025 accredited test method (A2LA Ref: 6739.03) and ISTOC1079 is not tested within the scope of the accredited test method. Item No - Description | Qty: - ISTOC1079-TOC Blank: 2. - ISTOC1082-TOC Standard 0.5mg/L C NIST Sucrose: 1. - ISTOC1081-TOC Standard 0.25mg/L C NIST Sucrose: 1. - ISTOC1083-TOC Standard 0.75mg/L C NIST Sucrose: 1.

Reagecon's 0.5 mg/L C as Sodium Dodecylbenzene Sulfonate Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product.

Reagecon's 5 mg/L C as Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's USP Reagent Water Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from water that is prepared by a special proprietary process. The product is produced from water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product.

Reagecon's 0.05 mg/L C from NIST KHP Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's 0.5 mg/L C from USP Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in bottles that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's 0.5 mg/L C from USP Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.

Reagecon's 125 mg/L C as Sucrose Total Organic Carbon (TOC) Standard is a product of extremely high specification and purity. The product is produced from ultra pure raw materials including water that is prepared by a special proprietary process. The product is presented in vials that are manufactured, cleaned and leached, by a special proprietary process specifically for the product. - This product is prepared gravimetrically on a weight/volume basis to a specification of ± 2%. Reagecon holds ISO 17025 accreditation (A2LA Ref: 6739.02) for calibration of laboratory balances. The concentration of this standard is verified using a high performance calibrated Total Organic Carbon Analyser (TOC Instrument) using Reagecon’s ISO 17025 accredited (A2LA Ref: 6739.03) test method.