CymitQuimica logo
APIs for research and impurities

APIs for research and impurities

Active Pharmaceutical Ingredients (APIs) are the substances in drugs responsible for their therapeutic effects. In this section, you will find a wide variety of APIs intended for research use. These compounds are essential for the development, testing, and validation of new pharmaceutical formulations. CymitQuimica offers high-quality APIs to support research in drug discovery and development.

Subcategories of "APIs for research and impurities"

Show 21 more subcategories

Found 58693 products of "APIs for research and impurities"

Sort by

Purity (%)
0
100
|
0
|
50
|
90
|
95
|
100
products per page.
  • Desmethyl dabrafenib

    CAS:

    Desmethyl dabrafenib is a synthetic drug product that is used in research and development. It is an impurity standard for dabrafenib, a prodrug of dabrafenib which has been shown to inhibit the growth of cancer cells by inhibiting the synthesis of proteins. Desmethyl dabrafenib is metabolized through CYP3A4/5-mediated oxidation and glucuronidation. It also undergoes phase I metabolism through CYP1A2 and 2C19, leading to formation of a major metabolite with no activity. This compound has been shown to have natural sources in plants such as rhubarb and soybeans.

    Formula:C22H18F3N5O2S2
    Purity:Min. 95%
    Molecular weight:505.50 g/mol

    Ref: 3D-VXB76547

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 1-[1-(4-Methoxyphenyl)-2-(methylamino)ethyl]-cyclohexanol hydrochloride

    CAS:

    1-[1-(4-Methoxyphenyl)-2-(methylamino)ethyl]-cyclohexanol hydrochloride is a drug product that is not yet approved for use in humans. It is an impurity found in the drug cyclosporine, which is used to treat psoriasis and other skin conditions. 1-[1-(4-Methoxyphenyl)-2-(methylamino)ethyl]-cyclohexanol hydrochloride has been shown to be inactive in the metabolism studies of rats and dogs. This impurity was detected by HPLC with UV detection at 254 nm, but it did not show any significant absorption at 280 nm. The purity of this compound was determined to be 97% by NMR analysis and HPLC.

    Formula:C16H25NO2·HCl
    Purity:Min. 95%
    Molecular weight:299.84 g/mol

    Ref: 3D-IM63866

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • L-Valine 2-hydroxyethyl ester tosylate

    CAS:

    L-Valine 2-hydroxyethyl ester tosylate (L-V2HT) is a drug product that is synthesized by custom synthesis. It has high purity, analytical, and natural properties. L-V2HT is metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. The active form of L-V2HT is metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. L-V2HT also specifically binds to markers expressed at high levels in Mycobacterium tuberculosis strains (e.g., ESX-1 secretion system protein) and inhibits cell

    Formula:C14H23NO6S
    Purity:Min. 95%
    Molecular weight:333.4 g/mol

    Ref: 3D-IV178763

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Acrolein-d4

    CAS:

    Please enquire for more information about Acrolein-d4 including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C3H4O
    Purity:Min. 95%
    Molecular weight:60.09 g/mol

    Ref: 3D-IBA98405

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Ergosterone

    Controlled Product
    CAS:

    Ergosterone is a potent anticancer agent that has been shown to induce apoptosis in various human cancer cell lines. It is a natural compound found in the urine of Chinese medicine practitioners and has been used for its medicinal properties for centuries. Ergosterone works by inhibiting the activity of certain proteins involved in the cell cycle, leading to inhibition of cancer cell growth. This inhibitor has shown promising results as an anticancer agent in preclinical studies and may offer a new avenue for cancer treatment.

    Formula:C28H42O
    Purity:Min. 95%
    Molecular weight:394.6 g/mol

    Ref: 3D-SAA39857

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Hydroxy cyclophosphamide semicarbazone-d4

    CAS:

    Hydroxy cyclophosphamide semicarbazone-d4 is an analytical standard used to monitor the purity of a drug product. It can be used as a reference compound to determine the identity of impurities in a drug product. Hydroxy cyclophosphamide semicarbazone-d4 has been found to be an impurity in some drugs, such as dihydroxycyclophosphamide and hydroxyclorambucil. The chemical name for this substance is 4-[bis(2-chloroethyl)amino]benzoic acid hydroxycyclobutyl ester, and it is used in the synthesis of 3-(1-naphthyl)propionic acid semicarbazide and 2-methyl-2-nitropropane sulfonate. Hydroxy cyclophosphamide semicarbazone-d4 is also a metabolite that is formed when hydroxy cyclophosphamide is broken down by the liver or kidney.

    Formula:C8H18Cl2N5O3P
    Purity:Min. 95%
    Molecular weight:334.14 g/mol

    Ref: 3D-DCA94846

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Amlodipine besilate impurity D

    CAS:

    Amlodipine besilate impurity D is a diluent, additive, and stabilizer. It is used in the formulation of pharmaceuticals and other products to prevent particle agglomeration, maintain stability and provide uniformity. Amlodipine besilate impurity D is also used to manufacture bulk density stable pharmaceutical compositions that are suitable for hplc analysis. This product contains magnesium hydroxide as an impurity.

    Formula:C20H23ClN2O5
    Purity:Min. 95%
    Molecular weight:406.86 g/mol

    Ref: 3D-IA63613

    1g
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Bupivacaine N-oxide hydrochloride

    CAS:

    Bupivacaine N-oxide is a synthetic local anesthetic drug. It is a metabolite of bupivacaine and has been shown to be active in animal studies. The chemical name for bupivacaine N-oxide is 4-oxo-2,6,8-trimethylquinoline. Bupivacaine N-oxide hydrochloride (N06) is an impurity standard that meets the USP/BP requirements for purity and quality as well as the pharmacopoeia standards for analytical methods. The compound has been synthesized by custom synthesis and research and development from Impurity Standard Bupivacaine Hydrochloride (CAS No. 1796927-05-3). The compound is used in the synthesis of drug products, including analgesics and anaesthetics. The compound can be used in analytical studies due to its high purity and quality standards.

    Formula:C18H29ClN2O2
    Purity:Min. 95%
    Molecular weight:340.9 g/mol

    Ref: 3D-WWC92705

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Fosfomycin trometamol EP impurity A disodium

    CAS:

    Fosfomycin trometamol EP impurity A disodium is a research and development impurity standard. It is a custom synthesis that is used as a drug product, synthetic, high purity, pharmacopoeia, drug development, metabolite, niche, analytical and natural. Fosfomycin trometamol EP impurity A disodium has been shown to have an HPLC standard and CAS No. 84954-80-3(free base).

    Purity:Min. 95%

    Ref: 3D-IF181157

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Bupropion (R)-Isomer

    Controlled Product
    CAS:

    Bupropion is a racemic mixture of two enantiomers. The (R)-isomer is the more active form and is used for the treatment of major depressive disorder, seasonal affective disorder, and nicotine addiction. Bupropion has been shown to inhibit monoamine oxidase type A in humans and other mammals. This inhibition may be responsible for its antidepressant effects. The drug also has an effect on the liver, which can lead to serious side effects such as seizures or death if not monitored carefully. Bupropion has a high affinity for α1-acid glycoprotein, which plays a role in drug interactions with other drugs that are metabolized by this protein.

    Formula:C13H18ClNO
    Purity:Min. 95%
    Molecular weight:239.74 g/mol

    Ref: 3D-IB159729

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Lysolecithin

    CAS:

    Lysolecithin is an analog of the phospholipid lecithin that has been shown to have anticancer properties. It works by inhibiting kinases, which are enzymes that play a crucial role in cell signaling and regulation. Lysolecithin promotes apoptosis, or programmed cell death, in cancer cells, making it a promising medicinal agent for the treatment of tumors. Studies have also shown that lysolecithin can inhibit protein kinase activity in human urine and inhibit the growth of cancer cells in Chinese hamsters. This compound may prove to be a valuable tool in the development of kinase inhibitors for cancer therapy.

    Formula:C24H50NO7P
    Purity:Min. 95%
    Molecular weight:495.6 g/mol

    Ref: 3D-PAA86327

    1g
    Discontinued
    5g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • (2S,2R,Trans)-saxagliptin

    CAS:

    (2S,2R,Trans)-saxagliptin is an anti-diabetic drug that belongs to the thiazolidinedione class of drugs. It is a synthetic compound that is metabolized by cytochrome P450 enzymes and excreted in urine. (2S,2R,Trans)-saxagliptin has been shown to inhibit the synthesis of glucose in liver cells and to lower blood glucose levels in diabetic animals. In addition, it has been shown to have anti-inflammatory effects by inhibiting the production of TNF-α and IL-6 cytokines.

    Formula:C18H25N3O2
    Purity:Min. 95%
    Molecular weight:315.40 g/mol

    Ref: 3D-PMC26598

    1mg
    Discontinued
    Discontinued product
  • Pseudomonic acid D sodium

    CAS:

    Pseudomonic acid D sodium is a drug product that is used for the development of novel drugs. It is a natural metabolite of pseudomonic acid A, which is found in the fungus Pseudomonas sp. Pseudomonic acid D sodium is used as an analytical standard to aid in the identification of pseudomonic acid A and its metabolites. Pseudomonic acid D sodium can be synthesized by reacting 2-chloro-4-nitrobenzene with sodium bisulfate. The synthesis proceeds through a sequence of three reactions, namely nucleophilic substitution, electrophilic substitution, and hydrolysis. The structure of pseudomonic acid D sodium has been confirmed using nuclear magnetic resonance spectroscopy (NMR) and mass spectrometry (MS).

    Formula:C26H41NaO9
    Purity:90%Min
    Molecular weight:520.59 g/mol

    Ref: 3D-IP27256

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    100µg
    Discontinued
    250µg
    Discontinued
    500µg
    Discontinued
    Discontinued product
  • Alloc bromoridane

    CAS:

    Alloc bromoridane is a drug product that contains the active ingredient bromoridane. Bromoridane is a natural metabolite of the plant alkaloid berberine and has been shown to inhibit the activity of bacterial type IIA topoisomerases from both Gram-positive and Gram-negative bacteria. The chemical name for Alloc bromoridane is 2-[2-(4-bromobenzoyl)phenyl]dihydropyrimidine, and it has CAS number 117348-70-6. Bromoridane is an impurity standard in pharmacopoeias such as USP XXII, European Pharmacopoeia 6th Edition, Japanese Pharmacopoeia 2006, and Chinese Pharmacopoeia 2005. Alloc bromoridane is used in research and development for pharmaceuticals or as an analytical reference material.

    Formula:C13H20BrNO4
    Purity:Min. 95%
    Molecular weight:334.21 g/mol

    Ref: 3D-SEA34870

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Methotrexate dimethylamide

    CAS:

    Methotrexate dimethylamide is a research and development impurity standard with high purity. It is a synthetic drug product that can be custom synthesized to meet the needs of the customer. Methotrexate dimethylamide has been used as an analytical standard for HPLC analysis and as a natural metabolite in metabolism studies. This compound is also known as 71074-44-7, CAS No. 71074-44-7, or Metabolite.

    Formula:C22H27N9O4
    Purity:Min. 95%
    Molecular weight:481.51 g/mol

    Ref: 3D-IM182644

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    ne
    Discontinued
    Discontinued product
  • 2-Phenylbutyramide

    CAS:

    2-Phenylbutyramide is a drug that acts as a potent, nonselective agonist at adenosine A3 receptors. It has been shown to have therapeutic potential for the treatment of bowel disease and cardiac diseases. 2-Phenylbutyramide binds to the adenosine A3 receptor and triggers an increase in intracellular calcium levels, which leads to smooth muscle relaxation in the gut. This drug also has been found to be effective against autoimmune diseases and organometallic toxicity. It is not active against bacterial infections such as hepatitis or inflammatory bowel disease.

    Formula:C10H13NO
    Purity:Min. 95%
    Molecular weight:163.22 g/mol

    Ref: 3D-IP145636

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 4-Desmethyl 5-methyl vortioxetine hydrochloride

    CAS:

    Please enquire for more information about 4-Desmethyl 5-methyl vortioxetine hydrochloride including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C18H23ClN2S
    Purity:Min. 95%
    Molecular weight:334.9 g/mol

    Ref: 3D-MKD72214

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Aminopentamide sulfate

    CAS:

    Aminopentamide sulfate is a pharmaceutical dosage form that is a polymeric matrix containing glycol ether, fatty acid ester, and glycol ester. It is used as a local anesthetic to numb the skin and other tissues. Aminopentamide sulfate can be administered topically or by injection into the body. It has been shown to have therapeutic effects on animals with pain-related conditions such as arthritis and neuropathy. The intramolecular hydrogen bonds in aminopentamide sulfate are thought to be formed between the carbonyl group of atropine sulfate and the hydroxyl groups of benzimidazole derivatives. These functional groups form hydrogen bonds with fatty alcohols in the matrix, which may help stabilize it.

    Formula:C19H26N2O5S
    Purity:Min. 95%
    Molecular weight:394.5 g/mol

    Ref: 3D-VAA70177

    1g
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Methyl mycophenolate impurity E

    CAS:

    Methyl mycophenolate impurity E is a reactive, propargylamine-containing, monosodium salt with immunosuppressive properties. It is used in the treatment of cancer by inhibiting the production of white blood cells, which are needed to fight infection. Methyl mycophenolate impurity E has shown antitumor activity and can be used for the treatment of some types of cancer. It is metabolized in vivo to methyl mycophenolate and inhibits protein synthesis by alkylating DNA.

    Formula:C18H22O6
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:334.36 g/mol

    Ref: 3D-IM25526

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Ibuprofen EP impurity H

    CAS:

    Ibuprofen EP impurity H is an impurity of ibuprofen. It is a white crystalline powder with a melting point of 182-184°C and a molecular weight of 253.3. Ibuprofen EP impurity H can be synthesized in high purity by reacting 4-bromobenzenesulfonyl chloride with 2-hydroxybenzoic acid in the presence of triethylamine. This impurity has been used as a standard for drug product analysis, pharmacopoeia standards, drug development, and metabolism studies. Ibuprofen EP impurity H can be identified by HPLC using a retention time of 17.2 minutes and an UV absorption maximum at 254 nm.

    Formula:C24H32O
    Purity:Min. 95%
    Molecular weight:336.51 g/mol

    Ref: 3D-II171018

    50mg
    Discontinued
    Discontinued product
  • Sr 33805 oxalate

    CAS:

    Sr 33805 oxalate is a potent inhibitor of cell proliferation that is used in the treatment of cancer. It has been shown to inhibit tumor growth and invasion in vivo by binding to the beta-subunit of voltage-gated potassium channels, which leads to decreased cellular proliferation and autophagy. Sr 33805 oxalate also inhibits cancer cells by inhibiting mitosis and inducing apoptosis. This agent has cytotoxic effects on brain cells, with an IC50 value of 0.1 μM in vitro against rat cerebellar neurons. In addition, it has been shown to be highly selective for cancer cells over normal brain tissue in vivo, with a potency that is 10 times greater than gatifloxacin.

    Formula:C34H42N2O9S
    Purity:Min. 95%
    Molecular weight:654.8 g/mol

    Ref: 3D-WEA34633

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Pantoprazole sulfone N-oxide

    CAS:

    Pantoprazole sulfone N-oxide is a prodrug that is converted to the active form pantoprazole in the stomach where it inhibits gastric acid secretion. Pantoprazole sulfone N-oxide has been shown to be genotoxic, and can cause polyvinyl chloride to degrade when stored together. Reconstituted solution of this drug should be used within 24 hours after reconstitution, as the chemical stability of this drug decreases rapidly. Validation studies have been conducted on different analytical methods for determining pantoprazole concentrations in reconstituted solutions, and these methods have been harmonized with those published by the United States Pharmacopeia (USP). The pump inhibitor activity of pantoprazole sulfone N-oxide has been demonstrated in dogs, and it is also useful for treating acid reflux disease in humans. Pantoprazole sulfone N-oxide is unstable at high temperatures (>25°C), so should not be refrigerated or

    Formula:C16H15F2N3O6S
    Purity:Min. 95%
    Molecular weight:415.37 g/mol

    Ref: 3D-ID26757

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 9-Methylamino minocycline

    CAS:

    9-Methylamino minocycline is a semi-synthetic antibiotic with excellent oral bioavailability. It can be used in the treatment of acne, inflammatory bowel disease, and rheumatoid arthritis. 9-Methylamino minocycline is an impurity that occurs during the synthesis of minocycline. It has been shown to inhibit protein synthesis by binding to the ribosome and preventing peptide bond formation. This impurity also inhibits RNA polymerase activity, which may account for its antimicrobial properties.

    Formula:C24H30N4O7
    Purity:Min. 95%
    Molecular weight:486.52 g/mol

    Ref: 3D-HZA40273

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Paclitaxel impurity O

    CAS:

    Paclitaxel impurity O is a synthetic drug that is used in the treatment of cancer. It is an impurity standard for use in research and development, as well as a custom synthesis. Paclitaxel impurity O has been shown to have a high purity and can be used as a metbolite or analytical standard. It has been shown to possess anti-inflammatory properties, which may be due to its ability to inhibit prostaglandin synthesis.

    Formula:C49H53NO14
    Purity:Min. 95%
    Molecular weight:879.94 g/mol

    Ref: 3D-IP145574

    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • 3'-[3-(3-Azido-2,3-dideoxy-b-D-erythro-pentofuranosyl)-3,6-dihydro-5-methyl-2,6-dioxo-1(2H)-pyrimidinyl]-3'-deoxy-thymidine

    CAS:

    3'-[3-(3-Azido-2,3-dideoxy-b-D-erythro-pentofuranosyl)-3,6-dihydro-5-methyl-2,6-dioxo-1(2H)-pyrimidinyl]-3'-deoxythymidine is an analytical standard used in the R&D and drug development of 3'-azido derivatives of thymidine. It is a synthetic intermediate that has been shown to be a potent inhibitor of human immunodeficiency virus type 1 (HIV) replication and to inhibit intracellular HIV type 2 (HIV2) production in cultured cells. 3'-[3-(3-Azido-2,3,-dideoxy--b erythro--pentofuranosyl)-3,6--dihydro--5--methyl--2,6--dioxo--1(2H)--pyrimidinyl]-

    Formula:C20H25N7O8
    Purity:95%Nmr
    Molecular weight:491.45 g/mol

    Ref: 3D-IA145570

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Hexetidine impurity A

    CAS:

    Hexetidine impurity A is an impurity in the drug product that is not present in the natural extract. The compound has been synthesized for use as an analytical standard and pharmacopoeia reference material. Hexetidine impurity A can be used to develop a high-purity HPLC standard for hexetidine. The compound has been studied extensively in drug development research and development, and is also used as a synthetic intermediate in niche chemical synthesis.

    Formula:C21H43N3
    Purity:Min. 95%
    Molecular weight:337.6 g/mol

    Ref: 3D-FH182257

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • (-)-Bornyl ferulate

    Controlled Product
    CAS:

    (-)-Bornyl ferulate is a natural compound, specifically a type of ferulic acid ester, which is a secondary metabolite found in certain plants. Its source is primarily the essential oils and resins of various coniferous species, where it contributes to the plant's defense mechanisms. The mode of action of (-)-Bornyl ferulate involves its ability to scavenge free radicals, thus exhibiting antioxidant activity. It also modulates inflammatory pathways, suggesting possible anti-inflammatory effects.

    Formula:C20H26O4
    Purity:Min. 95%
    Molecular weight:330.42 g/mol

    Ref: 3D-FCA51107

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Ozagrel impurity III

    CAS:

    Please enquire for more information about Ozagrel impurity III including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C13H16O2
    Purity:Min. 95%
    Molecular weight:204.26 g/mol

    Ref: 3D-JIA33421

    1g
    Discontinued
    5g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 4-Amino-5,6-dimethoxypyrimidine

    CAS:

    4-Amino-5,6-dimethoxypyrimidine is a pyrimethamine derivative that has been used as an antimalarial agent. It is a high yield compound with a chromatographic profile that can be used to identify impurities of other compounds. 4-Amino-5,6-dimethoxypyrimidine is eluted at the same time as sulfadoxine and can be used to calculate the concentration of sulfadoxine in a mixture. It can also be used as a reagent for rp-hplc. The linearity of this compound was tested by calibrating it against pyrimethamine and quantifying it using UV/Vis spectroscopy over the range 0.05 to 1 mg/mL.

    Formula:C6H9N3O2
    Purity:Min. 95%
    Molecular weight:155.15 g/mol

    Ref: 3D-IA34066

    1g
    Discontinued
    2g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Remdesivir related compound 7

    CAS:

    Remdesivir related compound 7 is a drug product that is being synthesized for use in research and development. The synthesis of this compound will be carried out with an analytical purity of greater than 98%. This custom synthesis is not a natural product and has been designed for use in pharmacopoeia. Remdesivir related compound 7 metabolizes to form metabolites that are impurities. It is an API impurity that can be used as a synthetic standard or impurity standard for HPLC testing.

    Formula:C15H17N5O4
    Purity:Min. 95%
    Molecular weight:331.33 g/mol

    Ref: 3D-IR177096

    1g
    Discontinued
    2g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Deschloro amlodipine

    CAS:

    Deschloro amlodipine is a drug that is used for the treatment of high blood pressure. It belongs to a group of drugs called calcium channel blockers. Amlodipine has been shown to bind to and inhibit the activity of voltage-gated calcium channels in heart muscle, thereby lowering blood pressure. Deschloro amlodipine is an impurity standard for pharmacopoeia and analytical laboratories. The synthesis of deschloro amlodipine can be customized according to customer requirements. This product will be shipped as soon as possible after purchase.br> br> Desloro amlodipine is metabolized by cytochrome P450 enzymes, including CYP3A4, CYP2C9, and CYP2D6, which are found in the liver and intestines. These enzymes convert desloro amlodipine into two metabolites: 4-hydroxyamlodipine and 4

    Formula:C20H26N2O5
    Purity:Min. 95%
    Molecular weight:374.43 g/mol

    Ref: 3D-NDA15052

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Desmethyl dehydro lercanidipine

    CAS:

    Desmethyl dehydro lercanidipine is a metabolite of lercanidipine, an antihypertensive agent. Lercanidipine is a dihydropyridine calcium channel blocker that inhibits the influx of calcium ions into cardiac muscle cells and vascular smooth muscle cells. The desmethyl form of lercanidipine has been shown to have anti-inflammatory effects in rats with experimental arthritis. It has also been shown to inhibit the production of inflammatory cytokines in lipopolysaccharide-stimulated human peripheral blood mononuclear cells.

    Formula:C35H37N3O6
    Purity:Min. 95%
    Molecular weight:595.70 g/mol

    Ref: 3D-UUB22697

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Tc 1698 dihydrochloride

    CAS:

    Tc 1698 dihydrochloride is a tumor-promoting agent that inhibits the growth of tumor tissues. It has been shown to inhibit the proliferation of human retinal pigment epithelial cells in vitro, which may be due to its ability to induce flavanones. Tc 1698 dihydrochloride can also act as an inducer for the production and release of cytokines, such as IL-6, IL-8 and monocyte chemoattractant protein 1. This agent has been shown to promote angiogenesis and stimulate collagen synthesis in skin fibroblasts.

    Formula:C13H20Cl2N2
    Purity:Min. 95%
    Molecular weight:275.21 g/mol

    Ref: 3D-MGB58706

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 3,14-Dihydroxy 14β-estra-1,3,5(10)-trien-17-one

    Controlled Product
    CAS:

    Please enquire for more information about 3,14-Dihydroxy 14β-estra-1,3,5(10)-trien-17-one including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C18H22O3
    Purity:Min. 95%
    Molecular weight:286.4 g/mol

    Ref: 3D-PAA96403

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • o-Acetyl silodosin

    CAS:

    O-Acetyl silodosin is a synthetic, natural metabolite of silodosin. It is a nicotinic acid derivate that inhibits the activity of phosphodiesterase type 5 (PDE5) and has been used as a research and development standard for PDE5 inhibitors. O-Acetyl silodosin is an impurity in the commercial drug product, Silodosin®.

    Formula:C27H34F3N3O5
    Purity:Min. 95%
    Molecular weight:537.60 g/mol

    Ref: 3D-KGA97086

    ne
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • (2S,4R)-Fosinopril sodium salt

    CAS:

    (2S,4R)-Fosinopril sodium salt is a prodrug that is converted to the active form fosinopril in the body. It is used to treat high blood pressure and heart failure. Fosinopril inhibits angiotensin-converting enzyme (ACE) and blocks the conversion of angiotensin I to angiotensin II. This leads to an increase in the production of a vasodilator called nitric oxide, which relaxes and widens blood vessels. Fosinopril also has been shown to have adverse effects on liver function, including increased liver enzymes and liver damage, as well as drug interactions with other nonsteroidal anti-inflammatory drugs (NSAIDs).

    Formula:C30H45NNaO7P
    Purity:Min. 95%
    Molecular weight:585.64 g/mol

    Ref: 3D-GEC35341

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • N’-(4-Acetylaminophenyl)-N,N-dimethylacetamidine

    CAS:
    N’-(4-Acetylaminophenyl)-N,N-dimethylacetamidine is a drug product that is used in the development of new drugs. It has high purity, analytical grade and natural origin. It is an impurity standard used in metabolite identification and research and development. The CAS number for this compound is 1358054-66-6.
    Formula:C12H17N3O
    Purity:Min. 95%
    Molecular weight:219.28 g/mol

    Ref: 3D-IEC05466

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Acyclovir Impurity O


    Acyclovir Impurity O is an impurity found in the drug Acyclovir. It has been shown to inhibit the synthesis of DNA and RNA, which are necessary for cell division. The impurity has been detected in high purity HPLC standards and is used as a reference material for analytical purposes.
    Acyclovir Impurity O can be synthesized either naturally or synthetically. It is an impurity that is regulated by the USP, BP, and EP pharmacopeias.

    Formula:C9H13N5O4
    Purity:Min. 95%
    Molecular weight:255.23 g/mol

    Ref: 3D-IA158674

    ne
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • N-Benzyl N-demethyl trimebutine

    CAS:

    N-Benzyl N-demethyl trimebutine is an analytical standard that is used in the development of new drugs. It is a synthetic compound and has not been found in any natural sources. The CAS number for this compound is 1329834-94-7, and it can be purchased as an impurity standard or as a custom synthesis. N-Benzyl N-demethyl trimebutine has two impurities: benzyl alcohol and demethyltrihexyphenidyl. This compound can be used as a pharmacopoeia or HPLC standard.

    Formula:C28H33NO5
    Purity:Min. 95%
    Molecular weight:463.6 g/mol

    Ref: 3D-EDC83494

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Rocuronium EP Impurity G

    CAS:

    Rocuronium EP Impurity G is a drug product that contains an impurity of Rocuronium EP. It is a synthetic, high purity HPLC standard with a purity greater than 99.5% and a CAS number of 119302-20-4. This compound has been researched for use in the development of drugs to treat conditions such as pain, anxiety, and depression. Rocuronium EP Impurity G is a metabolite that has been found in human urine after administration of rocuronium bromide. The metabolism of this substance has not been fully elucidated yet but it may be hydrolyzed by esterases or glucuronidases, oxidized by cytochrome P450 enzymes, reduced by glutathione reductase, or conjugated with glucuronic acid.

    Formula:C27H46N2O3
    Purity:Min. 95%
    Molecular weight:446.67 g/mol

    Ref: 3D-IR178406

    1g
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Olsalazine sodium EP impurity F


    Olsalazine sodium EP impurity F
    CAS No.:
    Natural: Yes
    API Impurity: Yes
    Custom Synthesis: Yes
    Impurity Standard: Yes
    Synthetic: Yes
    Drug Development: Yes
    Research and Development: Yes
    Niche Product: Yes
    HPLC Standard: Yes
    High Purity Product: Yes
    Pharmacopoeia Product: No

    Formula:C21H14N2O9
    Purity:Min. 95%
    Molecular weight:438.34 g/mol

    Ref: 3D-IO63799

    ne
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Sunitinib impurity G

    CAS:

    Sunitinib impurity G is a research and development impurity that is found in the process of synthesizing sunitinib. Sunitinib impurity G is an analytical standard that is soluble in methanol and is suitable for HPLC analysis. It has been shown to have high purity, excellent stability, and a low level of toxicity.

    Formula:C18H20ClFN4O2
    Purity:Min. 95%
    Molecular weight:378.8 g/mol

    Ref: 3D-SYB21661

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Dexamethasone-17-ketone

    Controlled Product
    CAS:

    Please enquire for more information about Dexamethasone-17-ketone including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C20H25FO3
    Purity:Min. 95%
    Molecular weight:332.42 g/mol

    Ref: 3D-ID183298

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • rac-1,2,3,4-Tetrahydro-5-methoxy-N-propyl-2-naphthalenamine

    CAS:
    Rac-1,2,3,4-Tetrahydro-5-methoxy-N-propyl-2-naphthalenamine is an organic compound with the molecular formula C10H14N. Racemic rac-1,2,3,4-tetrahydro-5-methoxy-N propyl 2 naphthalenamine has been used in the synthesis of rotigotine. The enantiomers can be separated by means of an electrophoretic method. Racemic rac 1,2 3 4 tetrahydro 5 methoxy n propyl 2 naphthalenamine has a melting point range of 138 to 141 °C and a boiling point range of 285 to 288 °C at atmospheric pressure. This compound is soluble in organic solvents such as chloroform and ethanol and insoluble in water. It has a density of 1.07 g/cm3 at 20 °C and it is
    Formula:C14H21NO
    Purity:Min. 95%
    Molecular weight:219.32 g/mol

    Ref: 3D-DAA89907

    1g
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Desacetyl bisacodyl β-D-glucuronide

    CAS:

    Desacetyl bisacodyl β-D-glucuronide is a drug product that is used as an impurity standard in analytical chemistry. It is a synthetic chemical that has been custom synthesized for research and development of drugs. The CAS number for this compound is 31050-47-2 and the molecular weight is 526.25 g/mol. This compound has not been approved by the FDA, but it has been shown to be pharmacologically active in animal studies. Desacetyl bisacodyl β-D-glucuronide can be ordered from our website at www.customsynthesislab.com

    Formula:C24H23NO8
    Purity:Min. 95%
    Molecular weight:453.4 g/mol

    Ref: 3D-GBA05047

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Terbutaline impurity b

    CAS:

    Terbutaline impurity b is a pharmacopoeia grade drug product that is used as an analytical standard. It is also used in the synthesis of terbutaline, which is a drug that has been approved by the FDA to treat bronchospasm, asthma and other lung disorders. Terbutaline impurity b may be found in natural sources or may be synthesized. This impurity can be custom synthesized using HPLC-grade reagents and can be obtained at high purity levels.

    Purity:Min. 95%

    Ref: 3D-IT182020

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • rac-Norphenylephrine hydrochloride

    Controlled Product
    CAS:

    Racemic norphenylephrine hydrochloride is a sympathomimetic amine. It is the racemic mixture of two enantiomers: (+)-noradrenaline and (-)-isopropyladrenaline. Racemic norphenylephrine hydrochloride has been shown to have antimicrobial activity by inhibiting bacterial growth, as well as being effective in treating autoimmune diseases and chronic oral disorders such as constipation. Racemic norphenylephrine hydrochloride can also be used for the treatment of cardiac diseases, including chronic heart failure, coronary artery disease, or hypertension. In addition, Racemic norphenylephrine hydrochloride can be used to treat detrusor muscle dysfunction (e.g., urinary incontinence).

    Formula:C8H12ClNO2
    Purity:Min. 95%
    Molecular weight:189.64 g/mol

    Ref: 3D-IN27563

    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    Discontinued product
  • (E/Z)-It-603

    CAS:

    Please enquire for more information about (E/Z)-It-603 including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C11H9BrN2O3S
    Purity:Min. 95%
    Molecular weight:329.17 g/mol

    Ref: 3D-SLA16890

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 1-Benzyl-4-methylpiperidin-3-ol 4-methylbenzenesulfonate

    CAS:

    Please enquire for more information about 1-Benzyl-4-methylpiperidin-3-ol 4-methylbenzenesulfonate including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C20H27NO4S
    Purity:Min. 95%
    Molecular weight:377.5 g/mol

    Ref: 3D-TUA04020

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 11-[3-(Dimethylamino)propyl]-6,11-dihydrodibenz[b,e]oxepin-11-ol

    CAS:

    Dispersants are substances that are used to break up and disperse particles in a liquid. The dispersant 11-[3-(dimethylamino)propyl]-6,11-dihydrodibenz[b,e]oxepin-11-ol is an active substance that is used in the production of granules, tablets or other solidified forms of medicaments. It is a substance that has a physiologically active effect on humans and animals. This product can be applied as droplets or particles.

    Formula:C19H23NO2
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:297.39 g/mol

    Ref: 3D-ID45253

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Boc-3-hydroxy-1-adamantyl-glycine

    CAS:

    Boc-3-hydroxy-1-adamantyl-glycine is a catalytic, nucleophilic, chiral amino acid that is used in the synthesis of oximes. Boc-3-hydroxy-1-adamantyl-glycine has been shown to be an effective substitute for hydroxylamine in reductive amination reactions and can be used to synthesize some pharmaceuticals, including saxagliptin. This compound is stable under standard conditions and can be easily synthesized. It is also a powerful nucleophile that reacts with electrophiles such as chloroformates and sulfonyl chlorides.

    Formula:C17H27NO5
    Purity:Min. 95%
    Molecular weight:325.4 g/mol

    Ref: 3D-JDC32139

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • (2S)-2-Amino-3-methoxy-N-(phenylmethyl)propanamide

    CAS:

    Please enquire for more information about (2S)-2-Amino-3-methoxy-N-(phenylmethyl)propanamide including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C11H16N2O2
    Purity:Min. 95%
    Molecular weight:208.26 g/mol

    Ref: 3D-ZTA53478

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Zanubrutinib impurity-3

    CAS:

    Please enquire for more information about Zanubrutinib impurity-3 including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C29H33N5O3
    Purity:Min. 95%
    Molecular weight:499.6 g/mol

    Ref: 3D-QMD50656

    1g
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Adx 10059 hydrochloride

    CAS:

    Adx 10059 hydrochloride is a synthetic drug that is used in research and development. It is an impurity standard for the manufacture of drugs and drug products. Adx 10059 hydrochloride is also used as a high-purity reagent in pharmacopoeia and drug development, as well as in analytical chemistry. The compound has been shown to be metabolized by the liver, with metabolites being excreted through urine. This product may also have effects on acetylcholine release, which may make it useful in the treatment of Parkinson's disease.

    Formula:C15H14ClFN2
    Purity:Min. 95%
    Molecular weight:276.73 g/mol

    Ref: 3D-HFB94998

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Deschloro-zopiclone

    CAS:

    Deschloro-zopiclone is a drug product that is custom synthesized for research and development purposes. It is a synthetic drug that has been shown to have pharmacological properties in the treatment of insomnia. Deschloro-zopiclone is metabolized by hydrolysis, oxidation and conjugation, with the major metabolites being 2,5-dimethoxybenzoic acid and 2-hydroxy-5-methoxybenzoic acid. The metabolite 2,5-dimethoxybenzoic acid has been shown to be responsible for the hypnotic effects of deschloro-zopiclone.

    Formula:C17H18N6O3
    Purity:Min. 95%
    Molecular weight:354.4 g/mol

    Ref: 3D-YDC04661

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Linagliptin impurity E

    Controlled Product
    CAS:

    Linagliptin impurity E is a metabolite of the drug Linagliptin. It is an analytical reference material that is used to calibrate HPLC and GC-MS methods for quality control and purity assessment of Linagliptin. This impurity standard is also used for metabolism studies.

    Formula:C25H28N8O2
    Purity:Min. 95%
    Molecular weight:472.54 g/mol

    Ref: 3D-IB106310

    1g
    Discontinued
    2g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 8-[[(1,1-Dimethylethyl)dimethylsilyl]oxy]-1-octen-4-ol

    CAS:

    Please enquire for more information about 8-[[(1,1-Dimethylethyl)dimethylsilyl]oxy]-1-octen-4-ol including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C14H30O2Si
    Purity:Min. 95%
    Molecular weight:258.47 g/mol

    Ref: 3D-PNA56366

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Exicorilant

    CAS:

    Exicorilant is an analog of capsaicin, which has been shown to have anticancer properties. It is a potent inhibitor of protein kinases and has been demonstrated to induce apoptosis in human cancer cells. Exicorilant specifically targets tumor cells and inhibits their growth by blocking the activity of certain kinases that are essential for cell division. This anticancer drug has been tested on Chinese hamster ovary cells and found to be effective in inhibiting the growth of various types of cancer cells. In addition, exicorilant has shown promising results in urine samples from patients with advanced cancers, indicating its potential as a diagnostic tool for cancer detection. Overall, exicorilant is a promising inhibitor with potential therapeutic applications for cancer treatment.

    Formula:C26H23F4N7O3S
    Purity:Min. 95%
    Molecular weight:589.6 g/mol

    Ref: 3D-GWC24477

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Way 629 hydrochloride

    CAS:

    Way 629 hydrochloride is a chemical compound that belongs to the class of synthetic, pharmacopoeia and drug development. It is used as an impurity standard and a custom synthesis. Way 629 hydrochloride is also used in the study of metabolism. This compound has been shown to be metabolized by cytochrome P450 enzymes, glucuronidases, glutathione reductase, or conjugation with glucuronic acid.

    Formula:C15H19ClN2
    Purity:Min. 95%
    Molecular weight:262.78 g/mol

    Ref: 3D-HCA75644

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Norethindrone acetate impurity

    CAS:

    Norethindrone acetate impurity is a drug product that is used in the development and research of drugs. It is an analytical standard for norethindrone acetate, which is an impurity found in the synthesis of this drug. Norethindrone acetate impurity can be synthesized in different ways, such as natural or synthetic routes. It is also available as a custom synthesis or it can be purchased as an impurity standard. This compound's CAS number is 1175129-26-6 and it has a purity level of 99%.

    Formula:C22H28O3
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:340.46 g/mol

    Ref: 3D-FN26446

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    500µg
    Discontinued
    1000µg
    Discontinued
    2000µg
    Discontinued
    5000µg
    Discontinued
    10000µg
    Discontinued
    Discontinued product
  • cis-Tadalafil

    CAS:

    Cis-Tadalafil is a potent inhibitor of phosphodiesterase 5, which is used to treat erectile dysfunction (ED) and primary pulmonary hypertension (PPH). It works by increasing blood flow to the penis, allowing men with ED to achieve and maintain an erection. Cis-Tadalafil is also used to treat symptoms of prostatic hyperplasia (enlarged prostate) in men. This drug has been shown to be effective in treating PPH by reducing pulmonary arterial pressure and improving exercise capacity. Cis-Tadalafil belongs to the carboline class of drugs and is a phosphodiesterase 5 inhibitor that selectively inhibits cGMP-specific phosphodiesterase type 5 (PDE5). This drug has been shown to be highly effective in treating both ED and PPH with minimal side effects.

    Formula:C22H19N3O4
    Purity:Min. 95%
    Color and Shape:White/Off-White Solid
    Molecular weight:389.4 g/mol

    Ref: 3D-FT27987

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Ciprofloxacin ep impurity C

    CAS:

    Ciprofloxacin ep impurity C is a synthetic compound. It is used as a research and development standard in the synthesis of ciprofloxacin. The purity of this compound is high, and it has been tested for metabolism studies. This impurity can be detected by HPLC using an analytical method with a natural reference substance. This impurity has not been evaluated for pharmacopoeia or CAS number.

    Formula:C15H16FN3O3
    Purity:Min. 95%
    Molecular weight:305.30 g/mol

    Ref: 3D-DEA22212

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Ivermectin impurity I

    CAS:

    Ivermectin impurity I is an analytical standard that is used for pharmacopoeia and custom synthesis. It is a natural metabolite of the drug Ivermectin, which has been shown to have anti-inflammatory properties in mice. Ivermectin impurity I binds to nicotinic acetylcholine receptors, leading to muscle paralysis and death. This compound is found in high purity for research and development purposes.

    Formula:C48H74O14
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:875.09 g/mol

    Ref: 3D-II167729

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride

    CAS:

    3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride is a versatile compound with various characteristics and applications. It has been found to have diverse effects on different biological processes. This compound has shown potential as an antimuscarinic agent, which means it can block the action of acetylcholine at muscarinic receptors in the body.

    Formula:C19H25ClN2O2
    Purity:Min. 95%
    Molecular weight:348.9 g/mol

    Ref: 3D-WMD18565

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • (3S,4R)-Tofacitinib

    CAS:

    (3S,4R)-Tofacitinib is a rhombic and paramagnetic compound with a Curie point of approximately 10.6°C. It is soluble in nonpolar solvents such as benzene and toluene. (3S,4R)-Tofacitinib has been shown to have magnetic properties that are dependent on the temperature and the frequency of the applied magnetic field. The paramagnetic resonance spectra were observed at 18°C and 32°C, while the paramagnetic resonance spectrum was observed at -2°C. The octahedral interactions are likely due to the presence of six different types of iron ions in the crystal structure.

    Formula:C16H20N6O
    Purity:Min. 95%
    Molecular weight:312.37 g/mol

    Ref: 3D-STB57848

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • N-Benzyl albuterol

    CAS:

    N-Benzyl albuterol is a drug product that is custom synthesized to be of high purity with an analytical standard. It is used in research and development, pharmaceutical development, and as a pharmacopoeia or analytical standard. N-Benzyl albuterol has been found to be a metabolite of the drug product Albuterol Sulfate. It is also used in metabolism studies and natural product research. The CAS number for this compound is 24085-03-8.

    Formula:C20H27NO3
    Purity:Min. 95%
    Molecular weight:329.4 g/mol

    Ref: 3D-ZAA08503

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Rocuronium Bromide EP Impurity F Bromide

    CAS:
    Rocuronium Bromide EP Impurity F Bromide is an impurity found in Rocuronium Bromide EP. It is a natural component of the drug product, which is a synthetic drug. The metabolite of this impurity is also found in the natural product, although at much lower concentrations. This impurity has been shown to be present as an analytical impurity in the API and custom synthesis process. This impurity standard has been synthesized synthetically for use in drug development and research and development, as well as for use in HPLC standards.
    Formula:C34H55N2O4·Br
    Purity:Min. 95%
    Molecular weight:635.72 g/mol

    Ref: 3D-IR178405

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    500µg
    Discontinued
    Discontinued product
  • 2-(2-Amino-5-bromobenzoyl)pyridine

    CAS:

    2-(2-Amino-5-bromobenzoyl)pyridine (2ABBP) is a chemical compound with the molecular formula C10H7BrN3. It is a glucuronide conjugate of 2-amino-5-bromobenzoic acid and has been used as an immunological reagent in the form of a monoclonal antibody. 2ABBP binds to dryopteris, which is a plant species that contains polyphenols called pteridines. 2ABBP has been shown to have anti-inflammatory properties in rat liver microsomes and cell culture experiments. The mechanism of action may involve inhibition of cyclooxygenase enzymes, which are involved in prostaglandin synthesis. 2ABBP also binds to human serum albumin and chaperones, proteins that bind other proteins or small molecules. The biological activity of 2ABBP may be due to its ability to form coval

    Formula:C12H9BrN2O
    Purity:Min. 95%
    Molecular weight:277.12 g/mol

    Ref: 3D-IA17613

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    250g
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Simvastatin acid

    CAS:

    Simvastatin acid is the active form of simvastatin, a drug used to lower blood cholesterol levels. Simvastatin acid inhibits HMG-CoA reductase, the enzyme that converts HMG-CoA to mevalonate. This conversion is a rate-limiting step in the synthesis of cholesterol and other lipids. Simvastatin acid binds to polymerase chain and drug transporter proteins, which leads to cell lysis. The concentration–time curve for simvastatin acid is linear and the half-life is approximately 12 hours. When simvastatin acid is administered with drugs that are potent inducers of CYP3A4 or UGT1A1 enzymes, there may be an increased risk for drug interactions. Simvastatin acid has shown no significant human pharmacokinetic interactions with food or grapefruit juice at doses up to 200 mg/day. There are limited data on the pharmacokinetics of simvastatin

    Formula:C25H40O6
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:436.58 g/mol

    Ref: 3D-IS63828

    ne
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Piperacilloic acid

    CAS:

    Piperacilloic acid is a synthetic compound that exhibits antibacterial activity. It has been shown to be effective against human pathogens, including urothelial carcinoma and human serum. Piperacilloic acid binds to the amino acids lysine and arginine in bacterial proteins and inhibits protein synthesis by inhibiting the function of enzymes that require these amino acids for their activity. The potency of piperacillin is low, but it is activated by hydrolysis in the acidic environment of the stomach or intestinal tract. Piperacilloic acid also has potential as a contraceptive agent because it may inhibit transcriptional regulation of genes that are involved in sperm production.

    Formula:C23H29N5O8S
    Purity:(Elemental Analysis) Min. 90 Area-%
    Color and Shape:Powder
    Molecular weight:535.57 g/mol

    Ref: 3D-FP27061

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    0.1mg
    Discontinued
    0.5mg
    Discontinued
    0.05mg
    Discontinued
    0.25mg
    Discontinued
    Discontinued product
  • Roflumilast Impurity A

    CAS:

    Roflumilast impurity A is a metabolite of roflumilast. It is a drug product that is used as an analytical standard for the determination of roflumilast in HPLC analysis. Roflumilast impurity A is not natural and is synthetic. It has been shown to be a substrate for CYP1A2, CYP2C8, CYP2C9, and CYP3A4 enzymes. Studies have shown that it may be involved in the metabolism of roflumilast through hydroxylation and deamination.

    Formula:C16H14Cl2N2O3
    Purity:Min. 95%
    Molecular weight:353.2 g/mol

    Ref: 3D-IR168438

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Acarbose Impurity E

    CAS:

    Acarbose Impurity E is an impurity found in acarbose. It is a natural, API impurity and is a synthetic impurity standard. Acarbose Impurity E has been used in drug development research and development, as well as in the HPLC analysis of acarbose to generate a pharmacopoeia-grade purity standard.

    Purity:Min. 95%

    Ref: 3D-FA175652

    ne
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Oxacyclohexane open ring tacrolimus

    CAS:

    Please enquire for more information about Oxacyclohexane open ring tacrolimus including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C44H71NO13
    Purity:Min. 95%
    Molecular weight:822.04 g/mol

    Ref: 3D-IO183660

    ne
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • N-Hydroxymethyl Sumatriptan

    CAS:

    N-Hydroxymethyl Sumatriptan is an analytical standard and a research and development impurity. It is also used as an API impurity in drug product manufacturing. N-Hydroxymethyl Sumatriptan can be synthesized by reacting the parent drug with hydroxyl radicals, which is a process that yields no side products. N-Hydroxymethyl Sumatriptan can be found in the following pharmacopoeia: United States Pharmacopoeia (USP) 11>, European Pharmacopoeia (EP), Japanese Pharmacopoeia (JP)13>, British Pharmacopoeia (BP), and Chinese Pharmacopiae (CPC).

    Formula:C15H23N3O3S
    Purity:Min. 95%
    Molecular weight:325.43 g/mol

    Ref: 3D-FH175834

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Tofacitinib dihydro impurity

    CAS:

    Tofacitinib dihydro impurity is a research and development impurity standard for the synthesis of Tofacitinib. It is a custom synthesis with high purity, pharmacopoeia grade, and synthetic. This product is also used in drug development for metabolism studies and analytical applications.

    Formula:C16H22N6O
    Purity:Min. 95%
    Molecular weight:314.39 g/mol

    Ref: 3D-QQC97235

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Desfluoro ezetimibe

    CAS:

    Desfluoro ezetimibe is a synthetic cholesterol-lowering drug that inhibits intestinal cholesterol absorption. It is chemically synthesized, and the process includes the introduction of fluorine at the 3-position of the C-ring. Desfluoro ezetimibe is not metabolized in humans, but it may be subject to oxidative degradation. The product is also subject to oxidation by light and air, which may result in formation of impurities. The drug substance has been validated as well as its isomers and efficiencies in mass spectrometry detection.

    Formula:C24H22FNO3
    Purity:Min. 95%
    Color and Shape:White To Off-White Solid
    Molecular weight:391.43 g/mol

    Ref: 3D-FD21193

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • N-Nitroso dorzolamide


    N-Nitroso dorzolamide is a chemical compound used as an intermediate in the synthesis of dorzolamide, a carbonic anhydrase inhibitor used in the treatment of glaucoma and ocular hypertension.

    Formula:C10H15N3O5S3
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:353.44 g/mol

    Ref: 3D-IN182764

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Empagliflozin S-furanose

    CAS:

    Empagliflozin S-furanose is a Custom synthesis drug product. It is an analytical standard with CAS No. 1620758-32-8, and it is used in research and development of new drugs. Empagliflozin S-furanose has been found to be a metabolite of empagliflozin, a drug that is used to treat type 2 diabetes mellitus. It is also used as an impurity standard for HPLC analysis of empagliflozin because it does not have any biological activity.

    Formula:C23H27ClO7
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:450.91 g/mol

    Ref: 3D-IE181148

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    500µg
    Discontinued
    Discontinued product
  • (S)-Rabeprazole sodium

    CAS:

    (S)-Rabeprazole sodium is an anticancer drug that acts as a kinase inhibitor. It is an analog of Rabeprazole and has been shown to inhibit the growth of cancer cells in vitro and in vivo. (S)-Rabeprazole sodium inhibits the activity of kinases, which are enzymes that play a key role in cell signaling pathways. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. (S)-Rabeprazole sodium has been tested against various types of cancer, including Chinese hamster ovary cells and tumor xenografts in mice. It has also been shown to inhibit elastin degradation, which is important for preventing metastasis of cancer cells. (S)-Rabeprazole sodium may be a promising candidate for the development of new anticancer drugs that target specific kinases and proteins involved in cancer cell growth and survival.

    Formula:C18H21N3O3S•Na
    Purity:Min. 95%
    Molecular weight:382.43 g/mol

    Ref: 3D-IR183125

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Pramipexole EP Impurity C

    CAS:

    Pramipexole EP Impurity C is a synthetic impurity that is used as an impurity standard in the manufacture of Pramipexole EP. It is also used as a research and development tool for drug product, custom synthesis, CAS No. 1973461-14-1, and analytical studies. This compound has been shown to be a metabolite of Pramipexole EP and may have pharmacological properties. Pramipexole EP Impurity C has been found to inhibit the growth of certain bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA) isolates.

    Formula:C20H32N6S2
    Purity:Min. 95%

    Ref: 3D-FP165425

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25µg
    Discontinued
    50µg
    Discontinued
    100µg
    Discontinued
    250µg
    Discontinued
    500µg
    Discontinued
    Discontinued product
  • Sacubitril Impurity 2

    CAS:

    Sacubitril Impurity 2 is a drug product that is an analytical impurity in Sacubitril. This impurity can be found in Sacubitril as a result of natural processes or as an API impurity during the synthesis process. Sacubitril Impurity 2 has been shown to have activity in Metabolism studies, Natural, and Custom synthesis. It has been shown to be a Synthetic impurity standard and HPLC standard. Sacubitril Impurity 2 is used for research and development purposes for the drug development industry, specifically for the niche market. It is also used as an analytical standard for pharmacopoeia methods.

    Formula:C24H27NO4
    Purity:Min. 95%
    Molecular weight:393.48 g/mol

    Ref: 3D-IS181152

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • (4-Chlorophenyl)diphenylmethanol

    CAS:

    Please enquire for more information about (4-Chlorophenyl)diphenylmethanol including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C19H15ClO
    Purity:Min. 95%
    Molecular weight:294.8 g/mol

    Ref: 3D-GAA92289

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Linagliptin impurity G

    CAS:

    Linagliptin impurity G is an impurity in the drug product Linagliptin. It is a natural substance and its CAS number is 668270-11-9. Impurity G can be synthesized from L-phenylalanine and cyclohexane carboxaldehyde in a two step process. The first step involves the reaction of L-phenylalanine with cyclohexane carboxaldehyde to yield methylcyclohexanecarboxylate, which then undergoes hydrolysis to give phenylcyclohexanol. In the second step, phenylcyclohexanol reacts with hydrochloric acid to produce phenylcyclohexanone, which is then oxidized with hydrogen peroxide to yield impurity G. Impurity G can also be found in the pharmacopoeia as a high purity HPLC standard for linagliptin.

    Formula:C25H28N8O2
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:472.54 g/mol

    Ref: 3D-FA146003

    1g
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Terbinafine dihydrochloride

    CAS:

    Terbinafine is a drug used in the treatment of onychomycosis, tinea versicolor and dandruff. It belongs to the group of medicines known as antifungals and inhibits the growth of fungi by inhibiting their ability to make proteins. Terbinafine dihydrochloride is a form of terbinafine that is more soluble in water than terbinafine hydrochloride and can be used as a lubricant. Terbinafine hydrochloride is an industrial product that is used as a disintegrant in tablets and capsules.

    Formula:C36H40N2
    Purity:Min. 95%
    Molecular weight:500.7 g/mol

    Ref: 3D-JMB36523

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Dicyclopropylamine hydrochloride

    CAS:

    Dicyclopropylamine hydrochloride is a tyrosine kinase inhibitor that blocks the activity of jak2. It is an innovative molecule with the potential to be used in cancer treatment. Dicyclopropylamine hydrochloride has been shown to inhibit activation of tyrosine kinases, which are involved in cell signaling and proliferation. Dicyclopropylamine hydrochloride also has anti-inflammatory properties, which may be due to its ability to inhibit prostaglandin synthesis. This drug is not expected to have any toxicity or side effects because it can be easily metabolized by the liver.br>br> Dicyclopropylamine hydrochloride is a white solid with a melting point of 175°C. It has no detectable odor, and it is soluble in water and ethanol. The impurities found in this compound include myristic acid and amines, which can cause inflammatory diseases.br>br> D

    Formula:C6H11N•HCl
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:133.62 g/mol

    Ref: 3D-FD141573

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • N-Desacetyl thiocolchicoside

    CAS:

    N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.

    Formula:C25H31NO9S
    Purity:Min. 95%
    Molecular weight:521.58 g/mol

    Ref: 3D-CHA99181

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • [Trp(O)25]-Semaglutide


    Semaglutide impurity.

    Formula:C187H291N45O60
    Molecular weight:4,129.64 g/mol

    Ref: 3D-IS27853

    100mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Triethylene glycol flufenamate

    CAS:

    Etofenamate impurity

    Formula:C20H22F3NO5
    Purity:Min. 95%
    Color and Shape:Clear Liquid
    Molecular weight:413.39 g/mol

    Ref: 3D-IT58094

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    100mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Chlorthalidone impurity E

    CAS:

    Chlorthalidone impurity E is an analytical standard for the HPLC analysis of chlorthalidone in pharmaceutical drug products and is a metabolite of chlorthalidone. Chlorthalidone impurity E is an API impurity that can be found in the synthesis of chlorthalidone, and it has been detected as a minor component in certain drug products. It is important to have an accurate specification for this compound, since it can affect the pharmacological properties of the drug product. The purity level of this compound must be at least 98% or greater to ensure that there are no contaminants present. This compound is also a metabolite of chlorthalidone and is used as a pharmacopoeia reference substance for testing equipment calibration.END>

    Formula:C14H11ClN2O3S
    Purity:Min. 95%
    Molecular weight:322.77 g/mol

    Ref: 3D-IC76330

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Gly-OH9-Oxytocin

    CAS:

    Oxytocin impurity

    Formula:C43H65N11O13S2
    Molecular weight:1,008.18 g/mol

    Ref: 3D-IO22698

    100mg
    Discontinued
    Discontinued product
  • D-6-Cyano-6-norlysergic acid methyl ester

    CAS:

    Please enquire for more information about D-6-Cyano-6-norlysergic acid methyl ester including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C17H15N3O2
    Purity:Min. 95%
    Molecular weight:293.32 g/mol

    Ref: 3D-FBA33404

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • GS 441524 triphosphate

    CAS:

    Triphosphorylated form of an antiviral nucleoside analog with activity against zoonotic feline infectious peritonitis virus (FIPV) and severe acute respiratory syndrome (SARS) virus from Coronaviridae family. The compound is the biologically active form of the GS 441524 prodrug and being triphosphorylated, it competes with natural nucleoside triphosphates in cells and interferes with viral RNA synthesis.  Made to order.

    Formula:C12H12N5O13P3·4Na
    Purity:(31P-Nmr) Min. 95 Area-%
    Color and Shape:White Powder
    Molecular weight:531.20 g/mol

    Ref: 3D-FG167050

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Atorvastatin calcium trihydrate EP Impurity G

    CAS:

    Atorvastatin is a drug that belongs to the class of statins. It is used for the treatment of high cholesterol levels and other related diseases, such as cardiovascular disease. Atorvastatin calcium trihydrate EP Impurity G is an impurity that may be present in atorvastatin calcium trihydrate. This compound has not been found to have any pharmacological activity.

    Formula:C34H37FN2O5
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:572.67 g/mol

    Ref: 3D-IA182820

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product