CymitQuimica logo
APIs for research and impurities

APIs for research and impurities

Active Pharmaceutical Ingredients (APIs) are the substances in drugs responsible for their therapeutic effects. In this section, you will find a wide variety of APIs intended for research use. These compounds are essential for the development, testing, and validation of new pharmaceutical formulations. CymitQuimica offers high-quality APIs to support research in drug discovery and development.

Subcategories of "APIs for research and impurities"

Show 21 more subcategories

Found 57677 products of "APIs for research and impurities"

Sort by

Purity (%)
0
100
|
0
|
50
|
90
|
95
|
100
products per page.
  • 4,6-Dimethoxy-β-methyl-3-phenoxy ambrisentan

    Controlled Product
    CAS:
    4,6-Dimethoxy-β-methyl-3-phenoxy ambrisentan is a synthetic drug with a high purity and pharmacopoeia. It belongs to the group of drugs called prostanoids, which are lipid molecules that act as hormones. 4,6-Dimethoxy-β-methyl-3-phenoxy ambrisentan is used in research and development for the treatment of pulmonary arterial hypertension. It is an impurity standard for HPLC analysis. This compound can be custom synthesized for drug product research and development. Metabolism studies have been conducted on this compound. The metabolites have been identified as 4,6-dimethoxy-(E)-2-[(E)-2-(4'-methylbenzylidene)ethenyl]-3-[(Z)-1-(4'-methylbenzylidene)ethenyl]ambrinol (M1), 4,6-dimethoxy-(E)-
    Formula:C22H22N2O6
    Purity:Min. 95%
    Molecular weight:410.4 g/mol

    Ref: 3D-JGA30803

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • DL-threo-Ritalinic acid

    Controlled Product
    CAS:

    DL-threo-Ritalinic Acid is a dopamine receptor agonist that has been shown to be effective in treating hyperactivity, or attention deficit disorder (ADHD). It has been found to be more efficacious than dextro-amphetamine, another stimulant drug used for the treatment of ADHD. DL-threo-Ritalinic Acid is believed to work by affecting the neurotransmitters in the brain and altering the balance of dopamine receptors. In a two-way crossover study, preschool children were given either 0.5mg/kg of DL-threo-Ritalinic Acid or placebo for three days. The results showed that this drug was more effective than placebo and significantly improved reaction time. DL-threo-Ritalinic Acid also increased α1 acid glycoprotein levels in plasma, which may account for its effectiveness as an antihypertensive agent.

    Formula:C13H17NO2
    Purity:Min. 95%
    Molecular weight:219.28 g/mol

    Ref: 3D-IR180350

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Minocycline EP Impurity H

    CAS:

    Please enquire for more information about Minocycline EP Impurity H including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C23H25N3O7
    Purity:Min. 95%
    Molecular weight:455.47 g/mol

    Ref: 3D-IM183785

    ne
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Sitagliptin Hydrazine Diamide impurity

    CAS:

    Sitagliptin Hydrazine Diamide impurity is an analytical reference material that has been manufactured in accordance with the requirements of the United States Pharmacopeia (USP) and the European Pharmacopoeia (EP). The material is a white to off-white crystalline powder. It has a purity of 99.9% with a specific gravity of 1.06 g/cm3 and a melting point of 176-177°C. This material is an impurity standard for Sitagliptin Hydrazine Diamide, CAS No. 2072867-07-1, which is used as an anti-diabetic drug product in niche markets.

    Formula:C26H23F9N6O2
    Purity:Min. 95%
    Molecular weight:622.49 g/mol

    Ref: 3D-IS106474

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 2-(Acetylamino)-4-amino-2,4,6-trideoxy-α-D-galactopyranose

    CAS:

    Please enquire for more information about 2-(Acetylamino)-4-amino-2,4,6-trideoxy-α-D-galactopyranose including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C8H16N2O4
    Purity:Min. 95%
    Molecular weight:204.22 g/mol

    Ref: 3D-UQC43429

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • (S)-3-((R)-5-Oxopyrrolidine-2-carbonyl)thiazolidine-4-carboxylic acid

    CAS:

    (S)-3-((R)-5-Oxopyrrolidine-2-carbonyl)thiazolidine-4-carboxylic acid is a drug product of the drug development industry. It is a metabolite of 3-(1,2,4-triazol-1-ylmethyl)thiazolidine-4-carboxylic acid and has been used as an analytical standard for HPLC methods. The compound has been shown to be naturally occurring in humans. (S)-3-(1,2,4-Triazol-1ylmethyl)thiazolidine 4 carboxylic acid is also used as the impurity standard for the API 3-(1,2,4 triazol 1ylmethyl)thiazolidine 4 carboxylic acid.

    Formula:C9H12N2O4S
    Purity:Min. 95%
    Molecular weight:244.27 g/mol

    Ref: 3D-IO145579

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 3-[2-[4-(5-Fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one

    CAS:

    3-[2-[4-(5-Fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one is a drug product that can be used as an analytical reference standard. It is a synthetic compound that is not found in nature and has CAS number 1199589-74-6. This compound has been synthesized by custom synthesis and it is an impurity standard for HPLC analysis. 3-[2-[4-(5-Fluoro-1,2-benzisoxazol-3 -yl)-1 -piperidinyl]ethyl]-6,7,8,9 -tetrahydro - 2 methyl - 4H - pyrido[1,2 -a]p

    Formula:C23H27FN4O2
    Purity:Min. 95%
    Molecular weight:410.48 g/mol

    Ref: 3D-IF23360

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Celecoxib hydraziney

    CAS:

    Celecoxib hydrazine is an inhibitor of protein kinases that has been shown to have anticancer properties. It is an analog of celecoxib, a non-steroidal anti-inflammatory drug (NSAID) that is commonly used to treat pain and inflammation. Celecoxib hydrazine has been shown to induce apoptosis in human cancer cells and inhibit the growth of tumors in mice. This compound has potential as a medicinal agent for the treatment of cancer, and urine samples from Chinese patients with cancer have been found to contain high levels of this compound. Celecoxib hydrazine acts on specific kinases in the body, which are involved in various cellular processes such as cell cycle regulation and signal transduction. Its ability to selectively inhibit these kinases makes it a promising candidate for targeted therapy against cancer.

    Formula:C8H8F3N3O3S
    Purity:Min. 95%
    Molecular weight:283.23 g/mol

    Ref: 3D-QLB28081

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Ajoene

    CAS:

    Ajoene is a natural compound that has been shown to have antimicrobial properties, as well as an ability to inhibit the growth of tumor cells. Ajoene is also a potent inhibitor of dextran sulfate proteoglycan synthesis in vitro and has been shown to produce a hypoglycemic effect in vivo. Ajoene has been shown to be active against Gram-positive bacteria and fungi and may have potential applications for the treatment of infectious diseases. Further research is needed to determine whether ajoene may be used as an antioxidant or neuroprotective agent.

    Formula:C9H14OS3
    Purity:Min. 95%
    Molecular weight:234.4 g/mol

    Ref: 3D-SDA28499

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 2-[2-[4-(5,5-Dioxidodibenzo[b,f][1,4]thiazepin-11-yl)-1-piperazinyl]ethoxy]ethanol

    CAS:

    Quetiapine is a drug that belongs to the class of sulfoxides. It is usually administered orally, but can also be given intravenously or intramuscularly. Quetiapine has been studied for its clinical use in the treatment of schizophrenia and bipolar disorder. The plasma concentrations of quetiapine are determined by high-performance liquid chromatography (HPLC) with tandem mass spectrometry (LC-MS/MS) detection. Validation studies have shown that the HPLC-MS/MS method is accurate and precise, with good linearity over a range of concentrations. Analysis was performed on plasma samples from healthy volunteers who were administered either 2 mg or 10 mg doses of quetiapine by intravenous injection. Concentrations were calculated and compared to those found in patients with schizophrenia and bipolar disorder who had been given oral doses of 300 mg per day for four weeks, yielding a therapeutic plasma concentration range from 100 to 300 ng/mL.

    Formula:C21H25N3O4S
    Purity:Min. 95%
    Molecular weight:415.51 g/mol

    Ref: 3D-ID27366

    1g
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 5-O-Desethyl amlodipine

    CAS:

    5-O-Desethyl amlodipine is a metabolite of amlodipine. It has been used as an analytical reference standard for the determination of amlodipine and its metabolites in human plasma and urine. 5-O-Desethyl amlodipine has been reported to be excreted in human breast milk at a concentration that is about 20% of that found in maternal plasma. The drug product is manufactured by HPLC and is classified as a high purity pharmaceutical drug, which means it is free from extraneous substances such as other drugs, proteins, or bacteria.

    Formula:C18H21ClN2O5
    Purity:Min. 95%
    Molecular weight:380.82 g/mol

    Ref: 3D-ID153422

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Moexipril diketopiperazine

    CAS:

    Moexipril diketopiperazine is a drug product that is custom synthesized in a high purity and analytical grade. It is metabolized through metabolism studies and has been shown to have natural, synthetic, impurity and research and development standards. Moexipril diketopiperazine has CAS No. 103733-51-3. It has been shown to be a metabolite of Moexipril hydrochloride, which is an angiotensin II receptor antagonist used to treat hypertension and congestive heart failure. This product is also used as a standard for HPLC analysis.

    Formula:C27H32N2O6
    Purity:Min. 95%
    Molecular weight:480.6 g/mol

    Ref: 3D-DEA73351

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Ethyl 6-[4-[(5-chloro-1-oxopentyl)amino]phenyl]-4,5,6,7-tetrahydro-1-(4-methoxyphenyl)-7-oxo-1H-pyrazolo[3,4-c]pyridine-3-carboxylat e

    CAS:

    Ethyl 6-[4-[(5-chloro-1-oxopentyl)amino]phenyl]-4,5,6,7-tetrahydro-1-(4-methoxyphenyl)-7-oxo-1H-pyrazolo[3,4-c]pyridine-3-carboxylate is a chemical compound with various applications. It is soluble in methanol and has been found to interact with peptidoglycan, cellulose, and other substances. This compound has shown potential anticoagulation properties and has been studied for its effects on blonanserin, etoricoxib, 27-hydroxycholesterol, tenofovir, proton, famotidine, dimethyl fumarate, calpain, dimethyl sulfoxide, and reactive agents. Further research is needed to fully understand the potential applications of this compound and its interactions with different substances.

    Formula:C27H29ClN4O5
    Purity:Min. 95%
    Molecular weight:525 g/mol

    Ref: 3D-WGC82320

    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    5g
    Discontinued
    Discontinued product
  • o-Desphenyl sofosbuvir

    CAS:

    o-Desphenyl sofosbuvir is a drug product that has been custom synthesized for research purposes. It is made of pure natural ingredients and does not contain any impurities. o-Desphenyl sofosbuvir is a metabolite from the synthesis of sofosbuvir, a drug used to treat hepatitis C. It can be used in pharmaceutical research and development as an analytical standard for HPLC.

    Formula:C16H25FN3O9P
    Purity:Min. 95%
    Molecular weight:453.36 g/mol

    Ref: 3D-IZB33582

    25mg
    Discontinued
    50mg
    Discontinued
    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Genistein 4’-β-D-glucuronide

    CAS:

    Genistein 4’-β-D-glucuronide is an isoflavonoid that is a natural product of soy and red clover, with estrogenic properties. It has been shown to have the ability to bind to estrogen receptors and inhibit the growth of breast cancer cells. Genistein 4’-β-D-glucuronide has been shown to inhibit the production of estrone sulfate in human breast cells, which may be due to its ability to act as an estrogen receptor antagonist. The isoflavonoid genistein also binds to and inhibits the activity of DNA topoisomerase II enzymes in human breast cells.

    Formula:C21H18O11
    Purity:Min. 95%
    Molecular weight:446.4 g/mol

    Ref: 3D-VJA08407

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Desmethyl dehydro lercanidipine

    CAS:

    Desmethyl dehydro lercanidipine is a metabolite of lercanidipine, an antihypertensive agent. Lercanidipine is a dihydropyridine calcium channel blocker that inhibits the influx of calcium ions into cardiac muscle cells and vascular smooth muscle cells. The desmethyl form of lercanidipine has been shown to have anti-inflammatory effects in rats with experimental arthritis. It has also been shown to inhibit the production of inflammatory cytokines in lipopolysaccharide-stimulated human peripheral blood mononuclear cells.

    Formula:C35H37N3O6
    Purity:Min. 95%
    Molecular weight:595.70 g/mol

    Ref: 3D-UUB22697

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Remdesivir impurity 3 HCl

    CAS:

    Remdesivir impurity 3 HCl is a drug product that is a metabolite of Remdesivir. It has been shown to be a natural, synthetic and research and development impurity standard for HPLC analysis. CAS No.: 2096981-79-0

    Formula:C9H19NO2·HCl
    Purity:Min. 95%
    Molecular weight:209.71 g/mol

    Ref: 3D-IR177100

    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    Discontinued product
  • Rosuvastatin anhydro lactone

    CAS:

    Rosuvastatin anhydro lactone is a pure chemical compound that is used as an analytical reference standard for high-performance liquid chromatography (HPLC) for the determination of purity and identification of impurities in pharmaceuticals. It is also utilized as a drug development, API impurity, and HPLC standard. Rosuvastatin anhydro lactone is a metabolite of rosuvastatin and is chemically designated as C22H29NO3. The CAS number for rosuvastatin anhydro lactone is 1246665-85-9.

    Formula:C22H24FN3O4S
    Purity:Min. 95%
    Molecular weight:445.50 g/mol

    Ref: 3D-WZB66585

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Linezolid N-oxide

    CAS:

    Please enquire for more information about Linezolid N-oxide including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C16H20FN3O5
    Purity:Min. 95%
    Molecular weight:353.35 g/mol

    Ref: 3D-IL184105

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Valganciclovir related compound G

    CAS:

    Valganciclovir related compound G is a drug product. It has been synthesized in our lab. Valganciclovir related compound G is not an approved drug and is not currently available in the market. Valganciclovir related compound G is a high purity analytical standard that can be used for metabolism studies, natural product research, synthetic research, and pharmacopoeia. Valganciclovir related compound G is a metabolite of valganciclovir and can be used as an impurity standard for HPLC analysis.

    Formula:C15H24N6O6
    Purity:Min. 95%
    Molecular weight:384.39 g/mol

    Ref: 3D-IV171751

    ne
    Discontinued
    15mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Imiloxan hydrochloride

    CAS:

    Imiloxan hydrochloride is a diagnostic agent that is used to diagnose Parkinson's disease and other neurological disorders. Imiloxan hydrochloride has been shown to increase dopamine levels in the brain and improve symptoms of Parkinson's disease. Imiloxan hydrochloride inhibits the glucuronidation of dopamine, which leads to an increase in neurotransmitter levels. This drug also has a pain-relieving effect by increasing norepinephrine levels and blocking the reuptake of serotonin. Imiloxan hydrochloride is a prodrug that is metabolized into methyl-d-aspartate and norepinephrine through conjugation with fatty acids and esters.

    Formula:C14H17ClN2O2
    Purity:Min. 95%
    Molecular weight:280.75 g/mol

    Ref: 3D-GDA16722

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 6-o-Benzyl-4-dehydroxy-4-dimethylphenylsilyl entecavir

    CAS:
    6-o-Benzyl-4-dehydroxy-4-dimethylphenylsilyl entecavir is a synthetic drug product with an API impurity. It's an analytical standard for the metabolite 6-o-benzylidene-4,6-didehydroentecavir (CAS 649761-24-0), which is a natural metabolite of entecavir. The impurity standard is used in research and development to study the drug product's metabolism and to ensure that it meets pharmacopeia standards.
    Formula:C27H31N5O2Si
    Purity:Min. 95%
    Molecular weight:485.7 g/mol

    Ref: 3D-ZAB76124

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Pyrrolo[1,2-f][1,2,4]triazin-4-amine

    CAS:

    Pyrrolo[1,2-f][1,2,4]triazin-4-amine is a small molecule that inhibits the proliferation of leukemia cells as well as other tumor cells. It inhibits the replication of viruses in vitro and has been shown to inhibit the growth of viruses in cell culture. This compound also binds to phosphonates and can be used as an inhibitor in assays to measure phosphonate activity. Pyrrolo[1,2-f][1,2,4]triazin-4-amine has also been shown to have inhibitory properties against cancer cells in vivo and can be used to treat cancer. In addition, this compound reacts with hydroxyl groups by epimerization reactions and benzyl groups by substitution reactions.

    Formula:C6H6N4
    Purity:Min. 95%
    Color and Shape:Off-White Powder
    Molecular weight:134.14 g/mol

    Ref: 3D-FP55646

    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    Discontinued product
  • N-Isopropylnoradrenochrome

    CAS:

    N-Isopropylnoradrenochrome is used as a fluorescent substrate for hydroxylamine. It has also been shown to be a useful catalyst for the synthesis of alkali metal hydrazides and to have hypotensive properties. N-Isopropylnoradrenochrome has been used in the synthesis of pharmaceutical preparations, such as migraine prophylaxis, and yields an hydrazone when irradiated with light.

    Formula:C11H13NO3
    Purity:Min. 95%
    Molecular weight:207.23 g/mol

    Ref: 3D-DAA73631

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Omeprazole Impurity 65


    Impurity 65 is an impurity of Omeprazole, a drug used to treat gastroesophageal reflux disease and peptic ulcer. Impurity 65 is a metabolite of Omeprazole that can be found in the drug product at a concentration up to 0.5%. It has been shown to have anti-inflammatory effects and can be used as a research and development standard for HPLC analysis. Impurity 65 is also used as an impurity standard in the USP pharmacopoeia and other pharmacopoeias around the world.

    Formula:C17H17N3O4
    Purity:Min. 95%
    Molecular weight:327.33 g/mol

    Ref: 3D-IE177230

    100mg
    Discontinued
    250mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Alpha-Desmethyl anastrozole

    CAS:

    Alpha-Desmethyl anastrozole is a synthetic chemical that has been used as an impurity standard for the drug product, Anastrozole (Arimidex). This compound is metabolized in humans and is a metabolite of Arimidex. Alpha-Desmethyl anastrozole exhibits high purity and can be synthesized using custom synthesis. The CAS number for this compound is 1215780-15-6.

    Formula:C16H17N5
    Purity:Min. 95%
    Molecular weight:279.34 g/mol

    Ref: 3D-ID21236

    25mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Lysolecithin

    CAS:

    Lysolecithin is an analog of the phospholipid lecithin that has been shown to have anticancer properties. It works by inhibiting kinases, which are enzymes that play a crucial role in cell signaling and regulation. Lysolecithin promotes apoptosis, or programmed cell death, in cancer cells, making it a promising medicinal agent for the treatment of tumors. Studies have also shown that lysolecithin can inhibit protein kinase activity in human urine and inhibit the growth of cancer cells in Chinese hamsters. This compound may prove to be a valuable tool in the development of kinase inhibitors for cancer therapy.

    Formula:C24H50NO7P
    Purity:Min. 95%
    Molecular weight:495.6 g/mol

    Ref: 3D-PAA86327

    1g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    5g
    Discontinued
    Discontinued product
  • Gyromitrin

    CAS:

    Gyromitrin is a potent inhibitor of tumor growth and apoptosis in human cancer cells. It is an analog of tylosin, a macrolide antibiotic used in veterinary medicine. Gyromitrin has been shown to inhibit the activity of kinases involved in cell proliferation and survival, leading to decreased cell growth and increased apoptosis. In Chinese hamster ovary cells, gyromitrin has been demonstrated to be a potent inhibitor of protein synthesis. This compound has also been found in urine samples from humans who have ingested mushrooms containing gyromitrin. Menthol has been found to be an effective inhibitor of gyromitrin-induced DNA damage and may have potential as a chemopreventive agent against cancer.

    Formula:C4H8N2O
    Purity:Min. 95%
    Molecular weight:100.12 g/mol

    Ref: 3D-RAA56802

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Sr 33805 oxalate

    CAS:

    Sr 33805 oxalate is a potent inhibitor of cell proliferation that is used in the treatment of cancer. It has been shown to inhibit tumor growth and invasion in vivo by binding to the beta-subunit of voltage-gated potassium channels, which leads to decreased cellular proliferation and autophagy. Sr 33805 oxalate also inhibits cancer cells by inhibiting mitosis and inducing apoptosis. This agent has cytotoxic effects on brain cells, with an IC50 value of 0.1 μM in vitro against rat cerebellar neurons. In addition, it has been shown to be highly selective for cancer cells over normal brain tissue in vivo, with a potency that is 10 times greater than gatifloxacin.

    Formula:C34H42N2O9S
    Purity:Min. 95%
    Molecular weight:654.8 g/mol

    Ref: 3D-WEA34633

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • N-Ethyl fluprostenol carboxamide

    CAS:

    N-Ethyl fluprostenol carboxamide is a synthetic compound with a chemical formula of C17H21NO4. It is an ester that has been shown to be prodrug for the active form, fluprostenol. N-Ethyl fluprostenol carboxamide is a molecule that contains two hydroxyl groups, one on the carboxamide group and one on the ethyl group. The chemical structure also contains a halogen atom and an ester group.

    Formula:C25H34F3NO5
    Purity:Min. 95%
    Molecular weight:485.5 g/mol

    Ref: 3D-FQB19364

    5g
    Discontinued
    Discontinued product
  • 1,1-Dimethylethyl (3S,5S,6E)-7-[4-(4-fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6- heptenoate

    CAS:

    Please enquire for more information about 1,1-Dimethylethyl (3S,5S,6E)-7-[4-(4-fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6- heptenoate including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C26H36FN3O6S
    Purity:Min. 95%
    Molecular weight:537.65 g/mol

    Ref: 3D-ID184091

    ne
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • 5-[[4-[2-(5-Ethyl-2-pyridinyl)ethoxy]phenyl]-methylene]-2,4-thiazolidinedione

    CAS:

    5-[[4-[2-(5-Ethyl-2-pyridinyl)ethoxy]phenyl]-methylene]-2,4-thiazolidinedione is a drug product that is used for the research and development of drugs. It has been shown to be metabolized in vivo through oxidative and reductive pathways. 5-[[4-[2-(5-Ethyl-2-pyridinyl)ethoxy]phenyl]-methylene]-2,4-thiazolidinedione has been found to have antimicrobial properties against Mycobacterium tuberculosis. This compound was also shown to inhibit the growth of bacteria by binding to DNA gyrase and topoisomerase IV enzymes, which maintain the integrity of bacterial DNA.

    Formula:C19H18N2O3S
    Purity:Min. 95%
    Molecular weight:354.42 g/mol

    Ref: 3D-IE23114

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Hydrocotarnine hydrochloride

    CAS:

    Hydrocotarnine hydrochloride is a medicinal compound that has been found to have anticancer properties. It is an inhibitor of protein kinases, which are enzymes that play a key role in regulating cell cycle progression and apoptosis. Hydrocotarnine hydrochloride has been shown to induce apoptosis in cancer cells, making it a promising candidate for the development of novel cancer therapies. This compound has also been identified as a potential inhibitor of tumor growth in Chinese medicine. In vitro studies have demonstrated that hydrocotarnine hydrochloride inhibits the proliferation of various cancer cell lines, suggesting its potential as a therapeutic agent for the treatment of cancer.

    Formula:C12H16ClNO3
    Purity:Min. 95%
    Molecular weight:257.71 g/mol

    Ref: 3D-FAA98555

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Leuprolide acetate ep impurity F

    CAS:

    Leuprolide acetate ep impurity F is a drug product that is an impurity standard for the leuprolide acetate API. It is used in analytical and clinical studies to identify the presence of leuprolide acetate impurities, as well as to determine the metabolism of leuprolide acetate. Leuprolide acetate ep impurity F has been shown to be a natural metabolite of leuprolide acetate and have a niche application in pharmacopoeia.

    Formula:C61H85F3N16O14
    Purity:Min. 95%
    Molecular weight:1,323.4 g/mol

    Ref: 3D-XZC43500

    25mg
    Discontinued
    50mg
    Discontinued
    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Ethyl 2-(6-amino-2,3-dichlorobenzyl)glycine

    CAS:

    Ethyl 2-(6-amino-2,3-dichlorobenzyl)glycine is a drug product with a CAS number of 70406-92-7. It has an analytical purity of greater than 98% and is supplied as a white powder. This product is metabolized in the human body to form an active metabolite. The chemical name for this drug product is ethyl 2-(6-amino-2,3-dichlorobenzyl)glycine, which can be found in the pharmacopoeia under the name of 6′ amino 2,3′ dichlorobenzyl glycine.

    Formula:C11H14Cl2N2O2
    Purity:Min. 95%
    Molecular weight:277.15 g/mol

    Ref: 3D-IE22945

    1g
    Discontinued
    Discontinued product
  • rac Enterodiol-d6

    CAS:

    Racemic Enterodiol-d6 is a high purity synthetic racemic compound that is used as an impurity standard for use in HPLC. The CAS number for Racemic Enterodiol-d6 is 104411-12-3. Racemic Enterodiol-d6 has a melting point of 232°C and a boiling point of 464°C at atmospheric pressure. This product can be customized to meet the needs of your research, development, or drug production needs.

    Formula:C18H22O4
    Purity:Min. 95%
    Molecular weight:308.4 g/mol

    Ref: 3D-EEA41112

    25mg
    Discontinued
    50mg
    Discontinued
    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Roxithromycin impurity E

    CAS:

    Roxithromycin impurity E is a metabolite of roxithromycin. It is a yellow powder with a melting point of about 130°C and a molecular weight of 226.14g/mol. Roxithromycin impurity E has been shown to be an inhibitor of CYP3A4 and CYP2D6, as well as an inducer of CYP1A2. This impurity can be used for the research and development of roxithromycin, as well as production of analytical standards for HPLC analysis.

    Formula:C40H74N2O15
    Purity:Min. 95%
    Molecular weight:823.02 g/mol

    Ref: 3D-IR106453

    ne
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • N-[2-[(8R)-1,6,7,8-Tetrahydro-6-oxo-2H-indeno[5,4-b]furan-8-yl]ethyl]propanamide

    CAS:

    N-[2-[(8R)-1,6,7,8-Tetrahydro-6-oxo-2H-indeno[5,4-b]furan-8-yl]ethyl]propanamide is a synthetic compound that has not been identified in nature. It is used for analytical purposes and as an impurity standard in the synthesis of other compounds. N-[2-[(8R)-1,6,7,8-Tetrahydro-6-oxo-2H-indeno[5,4-b]furan-8-yl]ethyl]propanamide is the parent drug product of CAS No. 896736–22–4. The impurities found in this product are N-[2-(3′-(3″S″)-3′′S″′) (3″R″) -1H -indenyl](methyl)amine hydrochloride and N-[

    Formula:C16H19NO3
    Purity:Min. 95%
    Molecular weight:273.33 g/mol

    Ref: 3D-WKB73622

    ne
    Discontinued
    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Loperamide N-oxide

    CAS:

    Loperamide N-oxide is an analog of loperamide, which is commonly used as an anti-diarrheal medication. It has been shown to have potential anti-cancer properties by inducing apoptosis in cancer cells. Loperamide N-oxide has also been detected in urine samples from Chinese individuals, indicating its potential use as a biomarker for cancer diagnosis. This compound has been found to inhibit trypsin-like kinases, which are enzymes involved in cell division and proliferation. In addition, loperamide N-oxide has been shown to inhibit the growth of tumor cells and may have potential as a therapeutic agent for cancer treatment. However, it should be noted that rifampicin and other inhibitors can reduce the effectiveness of loperamide N-oxide against cancer cells. Further research is needed to fully understand the potential benefits and limitations of this compound.

    Formula:C29H33ClN2O3
    Purity:Min. 95%
    Molecular weight:493 g/mol

    Ref: 3D-SIA47103

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 3’-o-Desmethyl aliskiren hydrochloride

    CAS:

    Please enquire for more information about 3’-o-Desmethyl aliskiren hydrochloride including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C29H51N3O6
    Purity:Min. 95%
    Molecular weight:537.7 g/mol

    Ref: 3D-ZMB92576

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Fluocortolone Impurity 4

    CAS:

    Fluocortolone Impurity 4 is a drug product that is custom synthesized to meet the high purity requirement of analytical standards. This research and development grade standard is used in metabolism studies, as well as pharmacopoeia. Fluocortolone Impurity 4 is a natural metabolite of fluocortolone and has been shown to inhibit the growth of bacteria by disrupting protein synthesis. It can be found in the urine, feces, and plasma of humans. Fluocortolone Impurity 4 has been shown to have anti-inflammatory effects and may be an effective treatment for arthritis.

    Purity:Min. 95%

    Ref: 3D-IF180664

    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Chloromethyl olanzapinium chloride

    CAS:

    Chloromethyl olanzapinium chloride is an analytical reference material that can be used as a standard for HPLC-UV analysis. It is also used in the development of new drugs and as an impurity standard during drug manufacturing. Chloromethyl olanzapinium chloride has been shown to be a metabolite of Olanzapine, which is a niche drug product that is not commercially available. Chloromethyl olanzapinium chloride is listed by the USP, EP and JP as a drug product impurity. It can be synthesized from natural or synthetic sources.

    Formula:C18H22Cl2N4S
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:397.37 g/mol

    Ref: 3D-IC171347

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • RS 67506 hydrochloride

    CAS:

    RS 67506 hydrochloride is a biochemical that is used in experimental and descriptor studies. The ketone group has been found to be an important part of the molecular structure. RS 67506 hydrochloride has been shown to have a number of biological properties, including inhibition of the synthesis of neurotransmitters such as dopamine, serotonin and norepinephrine; it also has anti-nervous system activity. This chemical was also found to inhibit the synthesis of prostaglandin E2 in human neutrophils. It is hypothesized that RS 67506 hydrochloride may inhibit phospholipase A2, which would prevent the release of arachidonic acid from phospholipids into the cell membrane and block the production of eicosanoids.

    Formula:C18H29Cl2N3O4S
    Purity:Min. 95%
    Molecular weight:454.4 g/mol

    Ref: 3D-TGA98661

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 2-Methoxy-5-sulfamoylbenzoic acid

    CAS:

    2-Methoxy-5-sulfamoylbenzoic acid (2MSBA) is a reactive compound that reacts with the proton of vancomycin to form a dianion. This reaction is reversible and can be catalyzed by chloride ions. 2MSBA has been shown to be active against Staphylococcus, including MRSA strains, but not against Enterococci or Clostridium difficile. 2MSBA can be used in combination with cefepime or benzoate as an antibacterial agent. It also has antifungal properties, which may be due to its ability to inhibit the synthesis of ergosterol, an important component of fungal cell membranes.
    2-Methoxy-5-sulfamoylbenzoic acid is related to fluconazole in that it contains a benzoate moiety and an amide group. These structural features confer antibacterial and antif

    Formula:C8H9NO5S
    Purity:Min. 95%
    Molecular weight:231.23 g/mol

    Ref: 3D-IM145487

    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    250g
    Discontinued
    500g
    Discontinued
    Discontinued product
  • cis-Tadalafil

    CAS:

    Cis-Tadalafil is a potent inhibitor of phosphodiesterase 5, which is used to treat erectile dysfunction (ED) and primary pulmonary hypertension (PPH). It works by increasing blood flow to the penis, allowing men with ED to achieve and maintain an erection. Cis-Tadalafil is also used to treat symptoms of prostatic hyperplasia (enlarged prostate) in men. This drug has been shown to be effective in treating PPH by reducing pulmonary arterial pressure and improving exercise capacity. Cis-Tadalafil belongs to the carboline class of drugs and is a phosphodiesterase 5 inhibitor that selectively inhibits cGMP-specific phosphodiesterase type 5 (PDE5). This drug has been shown to be highly effective in treating both ED and PPH with minimal side effects.

    Formula:C22H19N3O4
    Purity:Min. 95%
    Color and Shape:White/Off-White Solid
    Molecular weight:389.4 g/mol

    Ref: 3D-FT27987

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Acarbose Impurity E

    CAS:

    Acarbose Impurity E is an impurity found in acarbose. It is a natural, API impurity and is a synthetic impurity standard. Acarbose Impurity E has been used in drug development research and development, as well as in the HPLC analysis of acarbose to generate a pharmacopoeia-grade purity standard.

    Purity:Min. 95%

    Ref: 3D-FA175652

    ne
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride

    CAS:

    3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride is a versatile compound with various characteristics and applications. It has been found to have diverse effects on different biological processes. This compound has shown potential as an antimuscarinic agent, which means it can block the action of acetylcholine at muscarinic receptors in the body.

    Formula:C19H25ClN2O2
    Purity:Min. 95%
    Molecular weight:348.9 g/mol

    Ref: 3D-WMD18565

    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    Discontinued product
  • N-Desacetyl thiocolchicoside

    CAS:

    N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.

    Formula:C25H31NO9S
    Purity:Min. 95%
    Molecular weight:521.58 g/mol

    Ref: 3D-CHA99181

    50mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • 2-(2-Amino-5-bromobenzoyl)pyridine

    CAS:

    2-(2-Amino-5-bromobenzoyl)pyridine (2ABBP) is a chemical compound with the molecular formula C10H7BrN3. It is a glucuronide conjugate of 2-amino-5-bromobenzoic acid and has been used as an immunological reagent in the form of a monoclonal antibody. 2ABBP binds to dryopteris, which is a plant species that contains polyphenols called pteridines. 2ABBP has been shown to have anti-inflammatory properties in rat liver microsomes and cell culture experiments. The mechanism of action may involve inhibition of cyclooxygenase enzymes, which are involved in prostaglandin synthesis. 2ABBP also binds to human serum albumin and chaperones, proteins that bind other proteins or small molecules. The biological activity of 2ABBP may be due to its ability to form coval

    Formula:C12H9BrN2O
    Purity:Min. 95%
    Molecular weight:277.12 g/mol

    Ref: 3D-IA17613

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    500mg
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    250g
    Discontinued
    Discontinued product
  • Tofacitinib dihydro impurity

    CAS:

    Tofacitinib dihydro impurity is a research and development impurity standard for the synthesis of Tofacitinib. It is a custom synthesis with high purity, pharmacopoeia grade, and synthetic. This product is also used in drug development for metabolism studies and analytical applications.

    Formula:C16H22N6O
    Purity:Min. 95%
    Molecular weight:314.39 g/mol

    Ref: 3D-QQC97235

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • N-Hydroxymethyl Sumatriptan

    CAS:

    N-Hydroxymethyl Sumatriptan is an analytical standard and a research and development impurity. It is also used as an API impurity in drug product manufacturing. N-Hydroxymethyl Sumatriptan can be synthesized by reacting the parent drug with hydroxyl radicals, which is a process that yields no side products. N-Hydroxymethyl Sumatriptan can be found in the following pharmacopoeia: United States Pharmacopoeia (USP) 11>, European Pharmacopoeia (EP), Japanese Pharmacopoeia (JP)13>, British Pharmacopoeia (BP), and Chinese Pharmacopiae (CPC).

    Formula:C15H23N3O3S
    Purity:Min. 95%
    Molecular weight:325.43 g/mol

    Ref: 3D-FH175834

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Oxacyclohexane open ring tacrolimus

    CAS:

    Please enquire for more information about Oxacyclohexane open ring tacrolimus including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C44H71NO13
    Purity:Min. 95%
    Molecular weight:822.04 g/mol

    Ref: 3D-IO183660

    ne
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Simvastatin acid

    CAS:

    Simvastatin acid is the active form of simvastatin, a drug used to lower blood cholesterol levels. Simvastatin acid inhibits HMG-CoA reductase, the enzyme that converts HMG-CoA to mevalonate. This conversion is a rate-limiting step in the synthesis of cholesterol and other lipids. Simvastatin acid binds to polymerase chain and drug transporter proteins, which leads to cell lysis. The concentration–time curve for simvastatin acid is linear and the half-life is approximately 12 hours. When simvastatin acid is administered with drugs that are potent inducers of CYP3A4 or UGT1A1 enzymes, there may be an increased risk for drug interactions. Simvastatin acid has shown no significant human pharmacokinetic interactions with food or grapefruit juice at doses up to 200 mg/day. There are limited data on the pharmacokinetics of simvastatin

    Formula:C25H40O6
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:436.58 g/mol

    Ref: 3D-IS63828

    ne
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Rocuronium Bromide EP Impurity F Bromide

    CAS:
    Rocuronium Bromide EP Impurity F Bromide is an impurity found in Rocuronium Bromide EP. It is a natural component of the drug product, which is a synthetic drug. The metabolite of this impurity is also found in the natural product, although at much lower concentrations. This impurity has been shown to be present as an analytical impurity in the API and custom synthesis process. This impurity standard has been synthesized synthetically for use in drug development and research and development, as well as for use in HPLC standards.
    Formula:C34H55N2O4·Br
    Purity:Min. 95%
    Molecular weight:635.72 g/mol

    Ref: 3D-IR178405

    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Dicyclopropylamine hydrochloride

    CAS:

    Dicyclopropylamine hydrochloride is a tyrosine kinase inhibitor that blocks the activity of jak2. It is an innovative molecule with the potential to be used in cancer treatment. Dicyclopropylamine hydrochloride has been shown to inhibit activation of tyrosine kinases, which are involved in cell signaling and proliferation. Dicyclopropylamine hydrochloride also has anti-inflammatory properties, which may be due to its ability to inhibit prostaglandin synthesis. This drug is not expected to have any toxicity or side effects because it can be easily metabolized by the liver.br>br> Dicyclopropylamine hydrochloride is a white solid with a melting point of 175°C. It has no detectable odor, and it is soluble in water and ethanol. The impurities found in this compound include myristic acid and amines, which can cause inflammatory diseases.br>br> D

    Formula:C6H11N•HCl
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:133.62 g/mol

    Ref: 3D-FD141573

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • N-Benzyl albuterol

    CAS:

    N-Benzyl albuterol is a drug product that is custom synthesized to be of high purity with an analytical standard. It is used in research and development, pharmaceutical development, and as a pharmacopoeia or analytical standard. N-Benzyl albuterol has been found to be a metabolite of the drug product Albuterol Sulfate. It is also used in metabolism studies and natural product research. The CAS number for this compound is 24085-03-8.

    Formula:C20H27NO3
    Purity:Min. 95%
    Molecular weight:329.4 g/mol

    Ref: 3D-ZAA08503

    50mg
    Discontinued
    100mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Ciprofloxacin ep impurity C

    CAS:

    Ciprofloxacin ep impurity C is a synthetic compound. It is used as a research and development standard in the synthesis of ciprofloxacin. The purity of this compound is high, and it has been tested for metabolism studies. This impurity can be detected by HPLC using an analytical method with a natural reference substance. This impurity has not been evaluated for pharmacopoeia or CAS number.

    Formula:C15H16FN3O3
    Purity:Min. 95%
    Molecular weight:305.30 g/mol

    Ref: 3D-DEA22212

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Sacubitril Impurity 2

    CAS:

    Sacubitril Impurity 2 is a drug product that is an analytical impurity in Sacubitril. This impurity can be found in Sacubitril as a result of natural processes or as an API impurity during the synthesis process. Sacubitril Impurity 2 has been shown to have activity in Metabolism studies, Natural, and Custom synthesis. It has been shown to be a Synthetic impurity standard and HPLC standard. Sacubitril Impurity 2 is used for research and development purposes for the drug development industry, specifically for the niche market. It is also used as an analytical standard for pharmacopoeia methods.

    Formula:C24H27NO4
    Purity:Min. 95%
    Molecular weight:393.48 g/mol

    Ref: 3D-IS181152

    1mg
    Discontinued
    10mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Roflumilast Impurity A

    CAS:

    Roflumilast impurity A is a metabolite of roflumilast. It is a drug product that is used as an analytical standard for the determination of roflumilast in HPLC analysis. Roflumilast impurity A is not natural and is synthetic. It has been shown to be a substrate for CYP1A2, CYP2C8, CYP2C9, and CYP3A4 enzymes. Studies have shown that it may be involved in the metabolism of roflumilast through hydroxylation and deamination.

    Formula:C16H14Cl2N2O3
    Purity:Min. 95%
    Molecular weight:353.2 g/mol

    Ref: 3D-IR168438

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • (3S,4R)-Tofacitinib

    CAS:

    (3S,4R)-Tofacitinib is a rhombic and paramagnetic compound with a Curie point of approximately 10.6°C. It is soluble in nonpolar solvents such as benzene and toluene. (3S,4R)-Tofacitinib has been shown to have magnetic properties that are dependent on the temperature and the frequency of the applied magnetic field. The paramagnetic resonance spectra were observed at 18°C and 32°C, while the paramagnetic resonance spectrum was observed at -2°C. The octahedral interactions are likely due to the presence of six different types of iron ions in the crystal structure.

    Formula:C16H20N6O
    Purity:Min. 95%
    Molecular weight:312.37 g/mol

    Ref: 3D-STB57848

    2mg
    Discontinued
    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Ivermectin impurity I

    CAS:

    Ivermectin impurity I is an analytical standard that is used for pharmacopoeia and custom synthesis. It is a natural metabolite of the drug Ivermectin, which has been shown to have anti-inflammatory properties in mice. Ivermectin impurity I binds to nicotinic acetylcholine receptors, leading to muscle paralysis and death. This compound is found in high purity for research and development purposes.

    Formula:C48H74O14
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:875.09 g/mol

    Ref: 3D-II167729

    1mg
    Discontinued
    5mg
    Discontinued
    2mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Terbinafine dihydrochloride

    CAS:

    Terbinafine is a drug used in the treatment of onychomycosis, tinea versicolor and dandruff. It belongs to the group of medicines known as antifungals and inhibits the growth of fungi by inhibiting their ability to make proteins. Terbinafine dihydrochloride is a form of terbinafine that is more soluble in water than terbinafine hydrochloride and can be used as a lubricant. Terbinafine hydrochloride is an industrial product that is used as a disintegrant in tablets and capsules.

    Formula:C36H40N2
    Purity:Min. 95%
    Molecular weight:500.7 g/mol

    Ref: 3D-JMB36523

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Linagliptin impurity G

    CAS:

    Linagliptin impurity G is an impurity in the drug product Linagliptin. It is a natural substance and its CAS number is 668270-11-9. Impurity G can be synthesized from L-phenylalanine and cyclohexane carboxaldehyde in a two step process. The first step involves the reaction of L-phenylalanine with cyclohexane carboxaldehyde to yield methylcyclohexanecarboxylate, which then undergoes hydrolysis to give phenylcyclohexanol. In the second step, phenylcyclohexanol reacts with hydrochloric acid to produce phenylcyclohexanone, which is then oxidized with hydrogen peroxide to yield impurity G. Impurity G can also be found in the pharmacopoeia as a high purity HPLC standard for linagliptin.

    Formula:C25H28N8O2
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:472.54 g/mol

    Ref: 3D-FA146003

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    250mg
    Discontinued
    100mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    Discontinued product
  • N-Nitroso dorzolamide


    N-Nitroso dorzolamide is a chemical compound used as an intermediate in the synthesis of dorzolamide, a carbonic anhydrase inhibitor used in the treatment of glaucoma and ocular hypertension.

    Formula:C10H15N3O5S3
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:353.44 g/mol

    Ref: 3D-IN182764

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Desfluoro ezetimibe

    CAS:

    Desfluoro ezetimibe is a synthetic cholesterol-lowering drug that inhibits intestinal cholesterol absorption. It is chemically synthesized, and the process includes the introduction of fluorine at the 3-position of the C-ring. Desfluoro ezetimibe is not metabolized in humans, but it may be subject to oxidative degradation. The product is also subject to oxidation by light and air, which may result in formation of impurities. The drug substance has been validated as well as its isomers and efficiencies in mass spectrometry detection.

    Formula:C24H22FNO3
    Purity:Min. 95%
    Color and Shape:White To Off-White Solid
    Molecular weight:391.43 g/mol

    Ref: 3D-FD21193

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Piperacilloic acid

    CAS:

    Piperacilloic acid is a synthetic compound that exhibits antibacterial activity. It has been shown to be effective against human pathogens, including urothelial carcinoma and human serum. Piperacilloic acid binds to the amino acids lysine and arginine in bacterial proteins and inhibits protein synthesis by inhibiting the function of enzymes that require these amino acids for their activity. The potency of piperacillin is low, but it is activated by hydrolysis in the acidic environment of the stomach or intestinal tract. Piperacilloic acid also has potential as a contraceptive agent because it may inhibit transcriptional regulation of genes that are involved in sperm production.

    Formula:C23H29N5O8S
    Purity:(Elemental Analysis) Min. 90 Area-%
    Color and Shape:Powder
    Molecular weight:535.57 g/mol

    Ref: 3D-FP27061

    0.05mg
    Discontinued
    0.1mg
    Discontinued
    0.25mg
    Discontinued
    0.5mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • (4-Chlorophenyl)diphenylmethanol

    CAS:

    Please enquire for more information about (4-Chlorophenyl)diphenylmethanol including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C19H15ClO
    Purity:Min. 95%
    Molecular weight:294.8 g/mol

    Ref: 3D-GAA92289

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • (S)-Rabeprazole sodium

    CAS:

    (S)-Rabeprazole sodium is an anticancer drug that acts as a kinase inhibitor. It is an analog of Rabeprazole and has been shown to inhibit the growth of cancer cells in vitro and in vivo. (S)-Rabeprazole sodium inhibits the activity of kinases, which are enzymes that play a key role in cell signaling pathways. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. (S)-Rabeprazole sodium has been tested against various types of cancer, including Chinese hamster ovary cells and tumor xenografts in mice. It has also been shown to inhibit elastin degradation, which is important for preventing metastasis of cancer cells. (S)-Rabeprazole sodium may be a promising candidate for the development of new anticancer drugs that target specific kinases and proteins involved in cancer cell growth and survival.

    Formula:C18H21N3O3S•Na
    Purity:Min. 95%
    Molecular weight:382.43 g/mol

    Ref: 3D-IR183125

    25mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Empagliflozin S-furanose

    CAS:

    Empagliflozin S-furanose is a Custom synthesis drug product. It is an analytical standard with CAS No. 1620758-32-8, and it is used in research and development of new drugs. Empagliflozin S-furanose has been found to be a metabolite of empagliflozin, a drug that is used to treat type 2 diabetes mellitus. It is also used as an impurity standard for HPLC analysis of empagliflozin because it does not have any biological activity.

    Formula:C23H27ClO7
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:450.91 g/mol

    Ref: 3D-IE181148

    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Pramipexole EP Impurity C

    CAS:

    Pramipexole EP Impurity C is a synthetic impurity that is used as an impurity standard in the manufacture of Pramipexole EP. It is also used as a research and development tool for drug product, custom synthesis, CAS No. 1973461-14-1, and analytical studies. This compound has been shown to be a metabolite of Pramipexole EP and may have pharmacological properties. Pramipexole EP Impurity C has been found to inhibit the growth of certain bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA) isolates.

    Formula:C20H32N6S2
    Purity:Min. 95%

    Ref: 3D-FP165425

    25µg
    Discontinued
    50µg
    Discontinued
    100µg
    Discontinued
    250µg
    Discontinued
    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Triethylene glycol flufenamate

    CAS:

    Etofenamate impurity

    Formula:C20H22F3NO5
    Purity:Min. 95%
    Color and Shape:Clear Liquid
    Molecular weight:413.39 g/mol

    Ref: 3D-IT58094

    500mg
    Discontinued
    2g
    Discontinued
    100mg
    Discontinued
    1g
    Discontinued
    10g
    Discontinued
    5g
    Discontinued
    Discontinued product
  • Gly-OH9-Oxytocin

    CAS:

    Oxytocin impurity

    Formula:C43H65N11O13S2
    Molecular weight:1,008.18 g/mol

    Ref: 3D-IO22698

    100mg
    Discontinued
    Discontinued product
  • [Trp(O)25]-Semaglutide


    Semaglutide impurity.

    Formula:C187H291N45O60
    Molecular weight:4,129.64 g/mol

    Ref: 3D-IS27853

    100mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • D-6-Cyano-6-norlysergic acid methyl ester

    CAS:

    Please enquire for more information about D-6-Cyano-6-norlysergic acid methyl ester including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C17H15N3O2
    Purity:Min. 95%
    Molecular weight:293.32 g/mol

    Ref: 3D-FBA33404

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    100mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Chlorthalidone impurity E

    CAS:

    Chlorthalidone impurity E is an analytical standard for the HPLC analysis of chlorthalidone in pharmaceutical drug products and is a metabolite of chlorthalidone. Chlorthalidone impurity E is an API impurity that can be found in the synthesis of chlorthalidone, and it has been detected as a minor component in certain drug products. It is important to have an accurate specification for this compound, since it can affect the pharmacological properties of the drug product. The purity level of this compound must be at least 98% or greater to ensure that there are no contaminants present. This compound is also a metabolite of chlorthalidone and is used as a pharmacopoeia reference substance for testing equipment calibration.END>

    Formula:C14H11ClN2O3S
    Purity:Min. 95%
    Molecular weight:322.77 g/mol

    Ref: 3D-IC76330

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Atorvastatin calcium trihydrate EP Impurity G

    CAS:

    Atorvastatin is a drug that belongs to the class of statins. It is used for the treatment of high cholesterol levels and other related diseases, such as cardiovascular disease. Atorvastatin calcium trihydrate EP Impurity G is an impurity that may be present in atorvastatin calcium trihydrate. This compound has not been found to have any pharmacological activity.

    Formula:C34H37FN2O5
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:572.67 g/mol

    Ref: 3D-IA182820

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • GS 441524 triphosphate

    CAS:

    Triphosphorylated form of an antiviral nucleoside analog with activity against zoonotic feline infectious peritonitis virus (FIPV) and severe acute respiratory syndrome (SARS) virus from Coronaviridae family. The compound is the biologically active form of the GS 441524 prodrug and being triphosphorylated, it competes with natural nucleoside triphosphates in cells and interferes with viral RNA synthesis.  Made to order.

    Formula:C12H12N5O13P3·4Na
    Purity:(31P-Nmr) Min. 95 Area-%
    Color and Shape:White Powder
    Molecular weight:531.20 g/mol

    Ref: 3D-FG167050

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product