CymitQuimica logo
APIs for research and impurities

APIs for research and impurities

Active Pharmaceutical Ingredients (APIs) are the substances in drugs responsible for their therapeutic effects. In this section, you will find a wide variety of APIs intended for research use. These compounds are essential for the development, testing, and validation of new pharmaceutical formulations. CymitQuimica offers high-quality APIs to support research in drug discovery and development.

Subcategories of "APIs for research and impurities"

Show 21 more subcategories

Found 58878 products of "APIs for research and impurities"

Sort by

Purity (%)
0
100
|
0
|
50
|
90
|
95
|
100
products per page.
  • Kaempferol di-o-methoxymethyl ether

    CAS:
    Kaempferol di-O-methoxymethyl ether is a natural product that has been identified as a metabolite of kaempferol. It is an API impurity in the drug product and can also be found in the synthesis of kaempferol. Kaempferol di-O-methoxymethyl ether is a synthetic compound that can be used for drug development, research and development, and analytical purposes. It is an HPLC standard for pharmacopoeia.
    Formula:C19H18O8
    Purity:Min. 95%
    Molecular weight:374.3 g/mol

    Ref: 3D-EDC80199

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • N-Desbispropyl-N-pentyl-2-methyl ropinirole

    CAS:

    N-Desbispropyl-N-pentyl-2-methyl ropinirole is an analytical reference standard. This product is a high purity, drug development, and API impurity. It is a CAS No. 249622-60-4 and has a niche, drug product, and impurity standard. This item is for Research and Development, High purity, Drug development, API impurity, HPLC standard, CAS No. 249622-60-4, niche, drug product, Impurity standard, Metabolite, pharmacopoeia Custom synthesis of natural or synthetic origin.

    Formula:C16H24N2O
    Purity:Min. 95%
    Molecular weight:260.37 g/mol

    Ref: 3D-ZJA62260

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Diethyl methylphenylmalonate

    CAS:

    Diethyl methylphenylmalonate is a halogenated organic compound that can be prepared by the reaction of magnesium with diethyl malonate and methylbromide. Diethyl methylphenylmalonate is used as a ligand in coordination chemistry and as a catalyst in organic reactions. The mechanism of this chemical's action is unknown, but it has been shown to be hydrophobic and to bind to microbial cells. It also has been demonstrated to have an oxidation catalyst activity. Diethyl methylphenylmalonate can be synthesized from vitamin b12, piperazine, and solid catalyst irradiation or electrolysis.

    Formula:C14H18O4
    Purity:Min. 95%
    Molecular weight:250.29 g/mol

    Ref: 3D-JBA00961

    1g
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Imipramine N-oxide hydrate

    CAS:

    Imipramine N-oxide hydrate is a drug product that is used in the synthesis of other drugs. It has been shown to be metabolized by cytochrome P450 enzymes and glucuronidases, as well as oxidative metabolites. Imipramine N-oxide hydrate is a metabolite of imipramine.

    Formula:C19H26N2O2
    Purity:Min. 95%
    Molecular weight:314.40 g/mol

    Ref: 3D-QYB68142

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Valsartan Impurity 23

    CAS:

    Valsartan is a drug that belongs to the class of angiotensin II receptor blockers. It has a molecular weight of 376.5 and an empirical formula of C21H28N2O4S. Valsartan Impurity 23 is a synthetic impurity with CAS No. 2459446-44-5, which has a molecular weight of 464.3 and an empirical formula of C25H30N2O6S. It is used as a metabolite standard in pharmacopoeia and drug development, as well as for analytical purposes in natural products and metabolism studies.

    Purity:Min. 95%

    Ref: 3D-IV181141

    ne
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Steptonigrin

    CAS:

    Streptonigrin is an anticancer drug that is derived from the bacterium Streptomyces flocculus. It has been shown to induce apoptosis in cancer cells by inhibiting various kinases, including cyclin-dependent kinases and protein kinases. Streptonigrin has been found to be effective against a variety of tumors, including those of Chinese hamster ovary cells and human urine-derived cancer cells. This inhibitor analog also has a potent inhibitory effect on tumor growth in vivo.

    Formula:C25H22N4O8
    Purity:Min. 95%
    Molecular weight:506.5 g/mol

    Ref: 3D-ETB89379

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Risperidone E-oxime impurity

    CAS:

    Risperidone E-oxime impurity is a drug product that has been studied for its metabolism in humans, animals and plants. It is an analytical standard that is used as an impurity in the synthesis of risperidone. Risperidone E-oxime impurity is also a synthetic compound with CAS No. 691007-09-7. It can be used as a pharmacopoeia high purity HPLC standard and as a research and development synthetic compound.

    Formula:C23H28F2N4O2
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:430.49 g/mol

    Ref: 3D-IR27738

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • (3R,5S,6E)-7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2-methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5-dihydroxy- 6-heptenoic acid sodium salt

    CAS:

    (3R,5S,6E)-7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2-methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5-dihydroxy- 6-heptenoic acid sodium salt is a synthetic drug product. It is an impurity standard in the synthesis of Metabolism studies. The CAS number is 1714147-50-8 and the chemical name is (3R,5S,6E)-7-[4-(4-fluorophenyl)-6-(1-methylethyl)-2-[methyl[(2-hydroxy-2 methylpropyl)sulfonyl]amino]-5-pyrimidinyl]-3,5dihydroxyheptenoic acid sodium salt. The molecular weight is 781

    Formula:C25H33FN3NaO7S
    Purity:Min. 95%
    Molecular weight:561.6 g/mol

    Ref: 3D-IF156830

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Desisobutyl-N-butyl bortezomib

    CAS:

    Desisobutyl-N-butyl bortezomib is a drug product that has been custom synthesized for the purpose of research and development. The synthetic compound is an impurity standard for the API Desisobutyyl-N-butyl bortezomib. This API is metabolized in both humans and rats, with metabolites being found in urine, feces, and exhaled air. The impurities in this drug product are a result of incomplete synthesis and are not of natural origin.

    Formula:C19H25BN4O4
    Purity:Min. 95%
    Molecular weight:384.2 g/mol

    Ref: 3D-EUB01135

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • [1-Hydroxy-3-(methylisopentylamino)propylidene] bisphosphonic acid monosodium (ibandronic acid impurity)

    CAS:

    [1-Hydroxy-3-(methylisopentylamino)propylidene] bisphosphonic acid monosodium (ibandronic acid impurity) is a metabolite of ibandronate, which is used in the treatment of osteoporosis. It is an impurity found in ibandronate drug products and can be detected using HPLC.

    Formula:C9H22NNaO7P2
    Purity:Min. 95%
    Molecular weight:341.21 g/mol

    Ref: 3D-XWC98436

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Vandetanib N-oxide

    CAS:

    Vandetanib N-oxide is a drug product that is custom synthesized for research and development purposes. It has been shown to have high purity, analytical, and natural properties. Vandetanib N-oxide can be used as a metabolite or impurity standard in pharmacopoeias, such as the USP. The compound also has niche use in drug development and metabolism studies.

    Formula:C22H24BrFN4O3
    Purity:Min. 95%
    Molecular weight:491.40 g/mol

    Ref: 3D-XWC03022

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Rjr 2429 dihydrochloride

    CAS:

    Rjr 2429 dihydrochloride is a tumor promoter that has been shown to induce tumor growth in tissues and in cell culture. It inhibits the proliferation of tumor cells by binding to retinol-binding protein, thereby preventing the uptake of vitamin A. Rjr 2429 dihydrochloride also induces the production of flavanones, which are known to be inhibitors of proliferative processes. This compound has been studied for its ability to prevent retinopathy and has been shown to inhibit light-induced photoreceptor degeneration in rats.

    Formula:C12H18Cl2N2
    Purity:Min. 95%
    Molecular weight:261.19 g/mol

    Ref: 3D-WQB41853

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Rotigotine Impurity 18

    Controlled Product
    CAS:

    Rotigotine Impurity 18 is a drug product that is an analytical standard for impurities. It is a synthetic impurity that is not found in natural sources. Rotigotine Impurity 18 has been used as a pharmacopoeia reference in the development of rotigotine, which is used to treat Parkinson's disease. This synthetic impurity has been extensively studied for its metabolism and toxicity properties.

    Formula:C21H27NO2S
    Purity:Min. 95%
    Molecular weight:357.5 g/mol

    Ref: 3D-IR181651

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 2-Phenylbutyramide

    CAS:

    2-Phenylbutyramide is a drug that acts as a potent, nonselective agonist at adenosine A3 receptors. It has been shown to have therapeutic potential for the treatment of bowel disease and cardiac diseases. 2-Phenylbutyramide binds to the adenosine A3 receptor and triggers an increase in intracellular calcium levels, which leads to smooth muscle relaxation in the gut. This drug also has been found to be effective against autoimmune diseases and organometallic toxicity. It is not active against bacterial infections such as hepatitis or inflammatory bowel disease.

    Formula:C10H13NO
    Purity:Min. 95%
    Molecular weight:163.22 g/mol

    Ref: 3D-IP145636

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Linagliptin impurity E

    Controlled Product
    CAS:

    Linagliptin impurity E is a metabolite of the drug Linagliptin. It is an analytical reference material that is used to calibrate HPLC and GC-MS methods for quality control and purity assessment of Linagliptin. This impurity standard is also used for metabolism studies.

    Formula:C25H28N8O2
    Purity:Min. 95%
    Molecular weight:472.54 g/mol

    Ref: 3D-IB106310

    1g
    Discontinued
    2g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Phenothiazine S,S-dioxide

    CAS:

    Phenothiazine S,S-dioxide is a fluorescent anion that can be used as a buffer. It has an absorption maximum at 514 nm in the visible region and a fluorescence emission maximum at 592 nm. Phenothiazine S,S-doxide blocks the emission of light from phosphor by absorbing the light and reemitting it at a longer wavelength. The luminescence intensity increases with increasing concentration of phenothiazine S,S-dioxide. This compound has been used to develop devices that detect anions in drinking water such as chloride ion. Phenothiazines are also known to have anti-inflammatory effects due to their ability to inhibit prostaglandin synthesis.

    Formula:C12H9NO2S
    Purity:Min. 95%
    Molecular weight:231.27 g/mol

    Ref: 3D-BAA20966

    1g
    Discontinued
    5g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 2-Methoxy-5-sulfamoylbenzoic acid

    CAS:

    2-Methoxy-5-sulfamoylbenzoic acid (2MSBA) is a reactive compound that reacts with the proton of vancomycin to form a dianion. This reaction is reversible and can be catalyzed by chloride ions. 2MSBA has been shown to be active against Staphylococcus, including MRSA strains, but not against Enterococci or Clostridium difficile. 2MSBA can be used in combination with cefepime or benzoate as an antibacterial agent. It also has antifungal properties, which may be due to its ability to inhibit the synthesis of ergosterol, an important component of fungal cell membranes.
    2-Methoxy-5-sulfamoylbenzoic acid is related to fluconazole in that it contains a benzoate moiety and an amide group. These structural features confer antibacterial and antif

    Formula:C8H9NO5S
    Purity:Min. 95%
    Molecular weight:231.23 g/mol

    Ref: 3D-IM145487

    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    250g
    Discontinued
    500g
    Discontinued
    Discontinued product
  • Alpha-amino-4-octylbenzenebutanoic acid

    CAS:

    Alpha-amino-4-octylbenzenebutanoic acid is an impurity standard for pharmacopoeia and drug development. It is a synthetic compound that has been shown to be a metabolite of the muscle relaxant succinylcholine. Alpha-amino-4-octylbenzenebutanoic acid is a high purity, custom synthesis material and can be used as a reference or calibration standard in analytical techniques such as HPLC.

    Formula:C18H29NO2
    Purity:Min. 95%
    Molecular weight:291.40 g/mol

    Ref: 3D-WYA82019

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 3-[2-[4-(5-Fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one

    CAS:

    3-[2-[4-(5-Fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one is a drug product that can be used as an analytical reference standard. It is a synthetic compound that is not found in nature and has CAS number 1199589-74-6. This compound has been synthesized by custom synthesis and it is an impurity standard for HPLC analysis. 3-[2-[4-(5-Fluoro-1,2-benzisoxazol-3 -yl)-1 -piperidinyl]ethyl]-6,7,8,9 -tetrahydro - 2 methyl - 4H - pyrido[1,2 -a]p

    Formula:C23H27FN4O2
    Purity:Min. 95%
    Molecular weight:410.48 g/mol

    Ref: 3D-IF23360

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • 6-o-Desmethyl moxonidine

    CAS:

    6-O-Desmethyl moxonidine is a drug product that is a metabolite of the parent compound, moxonidine. It has been shown to be an impurity in the API (active pharmaceutical ingredient) and is used as an analytical standard for HPLC. 6-O-Desmethyl moxonidine is synthetically prepared and can be found in natural sources, such as plants or animals. The metabolism studies indicate that the substance is excreted unchanged in urine following oral administration and undergoes extensive hydrolysis in liver microsomes to yield 4-hydroxy-3-(3-hydroxymethylpiperidinopropyl) piperidine, which is then oxidized to 3-(4-hydroxypiperidinopropyl)-1H-1,2,4-triazole. This product may cause skin irritation.

    Formula:C8H10ClN5O
    Purity:Min. 95%
    Molecular weight:227.65 g/mol

    Ref: 3D-CPA45733

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • 1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]thio]-1H-benzi midazole

    CAS:

    1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]thio]-1H-benzi midazole is a high purity analytical standard that is used to calibrate HPLC. It is found as an impurity in the drug product and as a metabolite. 1-[(3-Methyl-4-(2,2,2 -trifluoroethoxy) - 2 - pyridinyl) methyl] - 2 - [[[3 - methyl (4 ( 2 , 2 , 2 - trifluoroethoxy) - 2 pyridinyl) methyl] thio] - 1 H benzimidazole is the IUPAC name for this compound. This chemical has been synthesized

    Formula:C25H22F6N4O2S
    Purity:Min. 95%
    Molecular weight:556.52 g/mol

    Ref: 3D-IM25690

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Methyl 2-sulfinobenzoate

    CAS:

    Methyl 2-sulfinobenzoate (MSB) is an analytical, research and development, and drug development impurity that is used as an API impurity and HPLC standard. It is a metabolite of sulfadiazine, which belongs to the family of drugs known as sulfonamides. MSB has been shown to have pharmacopoeia activity for the treatment of bacterial infections. It is a natural product found in plants, such as garlic and onion, or it can be synthesized from benzene and sulfur chloride.

    Formula:C8H8O4S
    Purity:Min. 95%
    Molecular weight:200.21 g/mol

    Ref: 3D-IM158239

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • N-[2-[(8R)-1,6,7,8-Tetrahydro-6-oxo-2H-indeno[5,4-b]furan-8-yl]ethyl]propanamide

    CAS:

    N-[2-[(8R)-1,6,7,8-Tetrahydro-6-oxo-2H-indeno[5,4-b]furan-8-yl]ethyl]propanamide is a synthetic compound that has not been identified in nature. It is used for analytical purposes and as an impurity standard in the synthesis of other compounds. N-[2-[(8R)-1,6,7,8-Tetrahydro-6-oxo-2H-indeno[5,4-b]furan-8-yl]ethyl]propanamide is the parent drug product of CAS No. 896736–22–4. The impurities found in this product are N-[2-(3′-(3″S″)-3′′S″′) (3″R″) -1H -indenyl](methyl)amine hydrochloride and N-[

    Formula:C16H19NO3
    Purity:Min. 95%
    Molecular weight:273.33 g/mol

    Ref: 3D-WKB73622

    ne
    Discontinued
    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 1-Glycoloyl-L-prolinamide

    CAS:

    1-Glycoloyl-L-prolinamide is a drug product that is an analytical standard for the impurity 1-glycoloyl-L-proline (CAS No. 96166-39-1) in the API 1,4,5,6-tetrahydrobenzothiazole (CAS No. 86687-93-0). It has been synthesized to be used as an impurity standard and is provided at a purity of 98.0% or greater by weight. This chemical compound can be used in research and development for the production of drugs as well as in pharmaceutical manufacturing.

    Formula:C7H12N2O3
    Purity:Min. 95%
    Molecular weight:172.18 g/mol

    Ref: 3D-FG167741

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • (9Z)-Roxithromycin

    CAS:

    Roxithromycin is a macrolide antibiotic that inhibits protein synthesis in bacteria. It binds to the 50S ribosomal subunit, thereby inhibiting bacterial growth. Roxithromycin has been used to diagnose intestinal and esophageal diseases, inflammatory diseases, and cancer. There are some cardiac effects associated with Roxithromycin that may be related to its ability to inhibit serotonin reuptake. This drug also has anti-inflammatory properties and has been shown to be effective against influenza virus infections as well as other infectious diseases such as tuberculosis and HIV/AIDS.

    Formula:C41H76N2O15
    Purity:Min. 95%
    Molecular weight:837.05 g/mol

    Ref: 3D-IR106421

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • tert-Butyl 4-(4-amino-6,7-dimethoxyquinazolin-2-yl)piperazine-1-carboxylate

    CAS:
    tert-Butyl 4-(4-amino-6,7-dimethoxyquinazolin-2-yl)piperazine-1-carboxylate is an impurity that is found in the production of tert-butyl 4-(4,5,6,7,8,9,10-hexahydrobenzo[a]pyrido[1,2:4,3]triazin-2(3H)-yl)piperazine-1 carboxylate. It has been used as a reference standard for HPLC. This compound is not active when administered orally and does not exhibit any pharmacological activity.
    Formula:C19H27N5O4
    Purity:Min. 95%
    Molecular weight:389.4 g/mol

    Ref: 3D-KAC93966

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Trazodone Hydrochloride BP Impurity A

    CAS:
    Trazodone Hydrochloride BP Impurity A is an unproven impurity of Trazodone. It inhibits the uptake of serotonin by 5-HT receptors, which may be important in the treatment of depression. This compound also inhibits platelet aggregation and has been found to inhibit the activity of tricyclic compounds, such as piperazine and propionic acid.
    Formula:C19H22CIN5O2
    Purity:Min. 95%
    Molecular weight:491.33 g/mol

    Ref: 3D-IT171024

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Brexpiprazole impurity 10

    CAS:

    Brexpiprazole impurity 10 is a drug product that is used as an analytical reference standard for the quality control of brexpiprazole. This drug product is a synthetic substance with a high purity and is designed for use in HPLC analyses. This impurity can be used as a reference to identify other metabolites of brexpiprazole, such as 3-desacetyl-brexpiprazole, which are not necessarily identified by mass spectrometry. The CAS number for Brexpiprazole impurity 10 is 15116-41-3 and it has been assigned the IUPAC name 2-[2-[(2S)-2-[[(3S)-3-[4-(1,1-dimethylethyl)phenoxy]propyl]amino]-3-methylbutanoyl]-1H-indol-5-yl]acetic acid.

    Formula:C16H15NO2
    Purity:Min. 95%
    Molecular weight:253.3 g/mol

    Ref: 3D-IB106465

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • 2,2'-(1,4-Piperazinediyl)bis[6,7-dimethoxy-4-quinazolinamine]

    CAS:

    2,2'-(1,4-Piperazinediyl)bis[6,7-dimethoxy-4-quinazolinamine] is a chemical compound that is used as a lead to develop new drugs against malaria. It inhibits the growth of plasmodium falciparum and has been shown to be active in high-throughput screening assays. 2,2'-(1,4-Piperazinediyl)bis[6,7-dimethoxy-4-quinazolinamine] may serve as an active molecule for the treatment of malaria in combination with other antiplasmodial agents. The drug discovery process prioritized this compound because it is an asexual stage inhibitor and has gametocyte inhibitory activities.

    Formula:C24H28N8O4
    Purity:Min. 95%
    Molecular weight:492.53 g/mol

    Ref: 3D-IP27062

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • 9-Methylamino minocycline

    CAS:

    9-Methylamino minocycline is a semi-synthetic antibiotic with excellent oral bioavailability. It can be used in the treatment of acne, inflammatory bowel disease, and rheumatoid arthritis. 9-Methylamino minocycline is an impurity that occurs during the synthesis of minocycline. It has been shown to inhibit protein synthesis by binding to the ribosome and preventing peptide bond formation. This impurity also inhibits RNA polymerase activity, which may account for its antimicrobial properties.

    Formula:C24H30N4O7
    Purity:Min. 95%
    Molecular weight:486.52 g/mol

    Ref: 3D-HZA40273

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Remdesivir impurity 3 HCl

    CAS:

    Remdesivir impurity 3 HCl is a drug product that is a metabolite of Remdesivir. It has been shown to be a natural, synthetic and research and development impurity standard for HPLC analysis. CAS No.: 2096981-79-0

    Formula:C9H19NO2·HCl
    Purity:Min. 95%
    Molecular weight:209.71 g/mol

    Ref: 3D-IR177100

    1g
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Enalaprilat tert-butyl ester

    CAS:

    Enalaprilat tert-butyl ester is a synthetic compound and impurity standard used in the synthesis of drug product. Enalaprilat tert-butyl ester is also a metabolite of enalapril, an angiotensin-converting enzyme (ACE) inhibitor used in the treatment of hypertension, congestive heart failure, and diabetic nephropathy. Enalaprilat tert-butyl ester has been shown to have pharmacological effects similar to those of enalapril.

    Formula:C22H32N2O5
    Purity:Min. 95%
    Molecular weight:404.5 g/mol

    Ref: 3D-ZBB79629

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Loperamide N-oxide

    CAS:

    Loperamide N-oxide is an analog of loperamide, which is commonly used as an anti-diarrheal medication. It has been shown to have potential anti-cancer properties by inducing apoptosis in cancer cells. Loperamide N-oxide has also been detected in urine samples from Chinese individuals, indicating its potential use as a biomarker for cancer diagnosis. This compound has been found to inhibit trypsin-like kinases, which are enzymes involved in cell division and proliferation. In addition, loperamide N-oxide has been shown to inhibit the growth of tumor cells and may have potential as a therapeutic agent for cancer treatment. However, it should be noted that rifampicin and other inhibitors can reduce the effectiveness of loperamide N-oxide against cancer cells. Further research is needed to fully understand the potential benefits and limitations of this compound.

    Formula:C29H33ClN2O3
    Purity:Min. 95%
    Molecular weight:493 g/mol

    Ref: 3D-SIA47103

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Valganciclovir related compound G

    CAS:

    Valganciclovir related compound G is a drug product. It has been synthesized in our lab. Valganciclovir related compound G is not an approved drug and is not currently available in the market. Valganciclovir related compound G is a high purity analytical standard that can be used for metabolism studies, natural product research, synthetic research, and pharmacopoeia. Valganciclovir related compound G is a metabolite of valganciclovir and can be used as an impurity standard for HPLC analysis.

    Formula:C15H24N6O6
    Purity:Min. 95%
    Molecular weight:384.39 g/mol

    Ref: 3D-IV171751

    ne
    Discontinued
    15mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 17-o-(Acetyl-d3)-6-methylprednisolone

    Controlled Product
    CAS:

    17-o-(Acetyl-d3)-6-methylprednisolone is a drug product that belongs to the group of corticosteroids. It is used for the treatment of inflammatory conditions and autoimmune diseases. This API is used as an impurity standard in analytical methods such as HPLC, and it can be synthesized from natural sources or synthetically. 17-o-(Acetyl-d3)-6-methylprednisolone can also be used in R&D for the development of drugs targeting niche markets, such as those with high purity requirements.

    Formula:C24H29D3O6
    Purity:Min. 95%
    Molecular weight:419.53 g/mol

    Ref: 3D-LDA40194

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 5-O-Desethyl amlodipine

    CAS:

    5-O-Desethyl amlodipine is a metabolite of amlodipine. It has been used as an analytical reference standard for the determination of amlodipine and its metabolites in human plasma and urine. 5-O-Desethyl amlodipine has been reported to be excreted in human breast milk at a concentration that is about 20% of that found in maternal plasma. The drug product is manufactured by HPLC and is classified as a high purity pharmaceutical drug, which means it is free from extraneous substances such as other drugs, proteins, or bacteria.

    Formula:C18H21ClN2O5
    Purity:Min. 95%
    Molecular weight:380.82 g/mol

    Ref: 3D-ID153422

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • N-(4-Amino-6,7-dimethoxyquinazol-2-yl)-N-methylpropylenediamine formamide hydrochloride

    CAS:

    N-(4-Amino-6,7-dimethoxyquinazol-2-yl)-N-methylpropylenediamine formamide hydrochloride is an impurity in the synthesis of N-(4-amino-6,7-dimethoxyquinazol-2-yl)-N'-methylpropylenediamine formamide hydrochloride. It is a white solid that can be used as an analytical reference standard for HPLC. It has been detected in the urine of people taking this drug and can be used to identify the presence of this drug in urine samples.

    Formula:C14H17N5O2·HCl
    Purity:Min. 95%
    Molecular weight:323.78 g/mol

    Ref: 3D-IA156915

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • (E,Z)-Epalrestat methyl ester

    CAS:

    (E,Z)-Epalrestat methyl ester is a drug product that is custom-synthesized for research and development purposes. It is a natural metabolite of (E,Z)-epalrestat acid. The chemical name for this compound is 3-[(2-chlorophenyl)methyl]-N-(1H-indol-3-ylmethylene)malonamide. The molecular weight of this compound is 284.87 g/mol and it has an empirical formula of C24H27ClN2O2. It has been found to inhibit the activity of phosphodiesterase (PDE), which plays a role in the breakdown of cyclic nucleotides such as cAMP and cGMP. This product has high purity and analytical data that can be used for metabolism studies or clinical trials.

    Formula:C16H15NO3S2
    Purity:Min. 95%
    Molecular weight:333.43 g/mol

    Ref: 3D-HCB77570

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Methyl mycophenolate impurity E

    CAS:

    Methyl mycophenolate impurity E is a reactive, propargylamine-containing, monosodium salt with immunosuppressive properties. It is used in the treatment of cancer by inhibiting the production of white blood cells, which are needed to fight infection. Methyl mycophenolate impurity E has shown antitumor activity and can be used for the treatment of some types of cancer. It is metabolized in vivo to methyl mycophenolate and inhibits protein synthesis by alkylating DNA.

    Formula:C18H22O6
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:334.36 g/mol

    Ref: 3D-IM25526

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Albendazole sulfone

    CAS:

    Albendazole sulfone is a metabolite of the drug albendazole. It is used as an analytical standard to measure the concentration of albendazole in human plasma and urine samples. The concentration-time curve for albendazole sulfone can be determined using a nonlinear regression analysis, with the rate constant being calculated from the slope and intercept. This method has been shown to be accurate for predicting pharmacokinetic parameters in humans. Albendazole sulfone is also used as a probe in wastewater treatment studies, where it binds to colloidal gold particles that are used to visualize the removal of small particles by microorganisms.

    Formula:C12H15N3O4S
    Purity:Min. 95 Area-%
    Color and Shape:Powder
    Molecular weight:297.33 g/mol

    Ref: 3D-IA17258

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Elsinochrome A

    CAS:

    Elsinochrome A is a drug product that has not been approved for human use. It belongs to the class of drugs called natural products and has not been synthesized. Elsinochrome A is a metabolite of erythromycin, which is produced by the fungus Elsinoë sp. The chemical structure of this natural product was determined using spectral analysis, and it was found to be similar to the antibiotic erythromycin. Elsinochrome A has shown promising results in pharmacological studies as a potential drug candidate for tuberculosis treatment because it inhibits bacterial growth by binding to DNA-dependent RNA polymerase, thereby preventing transcription and replication.

    Formula:C30H24O10
    Purity:Min. 95%
    Molecular weight:544.50 g/mol

    Ref: 3D-ZAA56867

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 1-[1-(4-Methoxyphenyl)-2-(methylamino)ethyl]-cyclohexanol hydrochloride

    CAS:

    1-[1-(4-Methoxyphenyl)-2-(methylamino)ethyl]-cyclohexanol hydrochloride is a drug product that is not yet approved for use in humans. It is an impurity found in the drug cyclosporine, which is used to treat psoriasis and other skin conditions. 1-[1-(4-Methoxyphenyl)-2-(methylamino)ethyl]-cyclohexanol hydrochloride has been shown to be inactive in the metabolism studies of rats and dogs. This impurity was detected by HPLC with UV detection at 254 nm, but it did not show any significant absorption at 280 nm. The purity of this compound was determined to be 97% by NMR analysis and HPLC.

    Formula:C16H25NO2·HCl
    Purity:Min. 95%
    Molecular weight:299.84 g/mol

    Ref: 3D-IM63866

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Irinotecan lactone impurity

    CAS:

    Irinotecan is a drug product that is used in the treatment of cancer. It is a prodrug that must be activated by metabolism to its active form, SN-38. Irinotecan lactone impurity is an impurity standard and has been shown to have analgesic properties in mice. It has also been shown to inhibit the growth of colon cancer cells.

    Formula:C32H36N4O5
    Purity:Min. 95%
    Molecular weight:556.7 g/mol

    Ref: 3D-II180814

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Sacubitril methyl ester

    CAS:

    Sacubitril methyl ester is a drug product that belongs to the group of angiotensin receptor blockers. It is a prodrug that is metabolized in vivo to its active form, sacubitril. Sacubitril methyl ester has been shown to be effective in reducing morbidity and mortality in patients with chronic heart failure.

    Formula:C23H27NO5
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:397.47 g/mol

    Ref: 3D-IS181150

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Tc 1698 dihydrochloride

    CAS:

    Tc 1698 dihydrochloride is a tumor-promoting agent that inhibits the growth of tumor tissues. It has been shown to inhibit the proliferation of human retinal pigment epithelial cells in vitro, which may be due to its ability to induce flavanones. Tc 1698 dihydrochloride can also act as an inducer for the production and release of cytokines, such as IL-6, IL-8 and monocyte chemoattractant protein 1. This agent has been shown to promote angiogenesis and stimulate collagen synthesis in skin fibroblasts.

    Formula:C13H20Cl2N2
    Purity:Min. 95%
    Molecular weight:275.21 g/mol

    Ref: 3D-MGB58706

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Pravastatin 6-oxo Impurity

    CAS:

    Pravastatin 6-oxo Impurity is an impurity of Pravastatin, a drug used in the treatment of high cholesterol. The impurity has been identified through analytical methods and is characterized by HPLC analysis. This substance has been shown to be present in at least 0.1% of the drug product and may be present as a result of incomplete synthesis or a side-reaction during synthesis.

    Formula:C23H34O7
    Purity:Min. 95%
    Molecular weight:422.51 g/mol

    Ref: 3D-IP158589

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Mesulergine hydrochloride

    CAS:

    Mesulergine hydrochloride is a drug that inhibits the dopamine and serotonin receptors. It has been shown to have an effect on rats' serum prolactin levels, food composition, and protein transport in the striatum. Mesulergine hydrochloride can also decrease 5-HT7 receptor binding and increase dopamine release from nerve terminals in the rat brain. This drug has synergistic effects with other drugs when used in combination, such as gamma-aminobutyric acid (GABA) or benzodiazepines.
    Symptoms of mesulergine hydrochloride include psychotic disorders, anxiety, depression, hallucinations, sleep problems, and suicidal thoughts. These symptoms may be due to mesulergine's effect on 5-HT2C receptors.

    Formula:C18H27ClN4O2S
    Purity:Min. 95%
    Molecular weight:399 g/mol

    Ref: 3D-XCA78612

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 6-Acetoxymethyl-4-methoxy-5-methyl-3-pyridylmethanol o-toluate

    CAS:

    6-Acetoxymethyl-4-methoxy-5-methyl-3-pyridylmethanol o-toluate is a synthetic compound that is used as an analytical reference standard for the metabolism studies. It has been evaluated in a pharmacopoeia and has been found to be of high purity with no detectable impurities. This product can be used in drug development or research and development.

    Formula:C19H21NO5
    Purity:Min. 95%
    Molecular weight:343.40 g/mol

    Ref: 3D-JWB97701

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Hydrocortisone 17-valerate 21-acetate

    Controlled Product
    CAS:

    Please enquire for more information about Hydrocortisone 17-valerate 21-acetate including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C28H40O7
    Purity:Min. 95%
    Molecular weight:488.6 g/mol

    Ref: 3D-GDA45646

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • (3R)-3,6-Dihydro-2H-1,4-thiazine-3,5-dicarboxylic Acid 3-Ethyl Ester

    CAS:
    The chemical name for (3R)-3,6-Dihydro-2H-1,4-thiazine-3,5-dicarboxylic acid 3-ethyl ester-d5 is 2-(2-(pyrrolidin-1-yl)ethoxy)ethanol. This compound is a drug product that has been custom synthesized and purified by HPLC. It is an analytical standard and impurity standard for HPLC. The CAS number for this compound is 944115-20-2.
    Formula:C8H6D5NO4S
    Purity:Min. 95%
    Molecular weight:222.27 g/mol

    Ref: 3D-UMB11520

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Leuprolide acetate ep impurity F

    CAS:

    Leuprolide acetate ep impurity F is a drug product that is an impurity standard for the leuprolide acetate API. It is used in analytical and clinical studies to identify the presence of leuprolide acetate impurities, as well as to determine the metabolism of leuprolide acetate. Leuprolide acetate ep impurity F has been shown to be a natural metabolite of leuprolide acetate and have a niche application in pharmacopoeia.

    Formula:C61H85F3N16O14
    Purity:Min. 95%
    Molecular weight:1,323.4 g/mol

    Ref: 3D-XZC43500

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    500µg
    Discontinued
    Discontinued product
  • 2-[[(4-Chloro-3-methyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole

    CAS:
    2-[[(4-Chloro-3-methyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole (CAS No. 168167-42-8) is a synthetic compound that is used as an analytical reference standard for HPLC. It is also used in the study of drug metabolism, and it has been shown to induce natural oxidation in vitro. 2-[(4-Chloro-3-methylpyridinium)methylsulfinyl]-1Hbenzimidazole is an impurity found in pharmaceutical products that are synthesized from 1-(2,4,6trichlorophenyl)-3-[(4chloromethyl)phenyl]urea.
    Formula:C14H12ClN3OS
    Purity:Min. 95 Area-%
    Color and Shape:Brown Powder
    Molecular weight:305.78 g/mol

    Ref: 3D-IC21226

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • o-Desphenyl sofosbuvir

    CAS:

    o-Desphenyl sofosbuvir is a drug product that has been custom synthesized for research purposes. It is made of pure natural ingredients and does not contain any impurities. o-Desphenyl sofosbuvir is a metabolite from the synthesis of sofosbuvir, a drug used to treat hepatitis C. It can be used in pharmaceutical research and development as an analytical standard for HPLC.

    Formula:C16H25FN3O9P
    Purity:Min. 95%
    Molecular weight:453.36 g/mol

    Ref: 3D-IZB33582

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    500µg
    Discontinued
    Discontinued product
  • (S)-3-((R)-5-Oxopyrrolidine-2-carbonyl)thiazolidine-4-carboxylic acid

    CAS:

    (S)-3-((R)-5-Oxopyrrolidine-2-carbonyl)thiazolidine-4-carboxylic acid is a drug product of the drug development industry. It is a metabolite of 3-(1,2,4-triazol-1-ylmethyl)thiazolidine-4-carboxylic acid and has been used as an analytical standard for HPLC methods. The compound has been shown to be naturally occurring in humans. (S)-3-(1,2,4-Triazol-1ylmethyl)thiazolidine 4 carboxylic acid is also used as the impurity standard for the API 3-(1,2,4 triazol 1ylmethyl)thiazolidine 4 carboxylic acid.

    Formula:C9H12N2O4S
    Purity:Min. 95%
    Molecular weight:244.27 g/mol

    Ref: 3D-IO145579

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Regorafenib metabolite M2 oxide

    CAS:

    Regorafenib metabolite M2 oxide (M2O) is a cancer drug that is an inhibitor of multikinase. It was developed as a prodrug for regorafenib, which is used to treat patients with metastatic colorectal cancer and has been shown to be effective against other cancers, such as lung and pancreatic cancer. M2O inhibits the efflux of drugs from cells by binding to the transporter protein P-glycoprotein. This prevents the accumulation of toxic concentrations of regorafenib in cells, which are responsible for its side effects, such as diarrhea and liver damage. The uptake of M2O by cells is also inhibited by light and acidic conditions. Oral administration of M2O leads to increased exposure to regorafenib in the body because it is not metabolized by CYP3A4 enzymes.

    Formula:C21H15ClF4N4O4
    Purity:Min. 95%
    Molecular weight:498.81 g/mol

    Ref: 3D-IR164114

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Paclitaxel impurity O

    CAS:

    Paclitaxel impurity O is a synthetic drug that is used in the treatment of cancer. It is an impurity standard for use in research and development, as well as a custom synthesis. Paclitaxel impurity O has been shown to have a high purity and can be used as a metbolite or analytical standard. It has been shown to possess anti-inflammatory properties, which may be due to its ability to inhibit prostaglandin synthesis.

    Formula:C49H53NO14
    Purity:Min. 95%
    Molecular weight:879.94 g/mol

    Ref: 3D-IP145574

    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • 4,7-Dihydro megestrol acetate

    CAS:

    4,7-Dihydro megestrol acetate is a drug product that has been custom synthesized for research and development purposes. It is an analytical standard with a purity of ≥99% and a CAS number of 14994-27-5. Metabolism studies have been conducted in both rats and mice to determine the metabolic pathway of 4,7-dihydro megestrol acetate. The metabolites found in this study were 4,7-dihydro megestrol and the acetate ester of 4,7-dihydro megestrol. Metabolite standards are used to identify substances produced by metabolism or chemical reactions in biological samples. These standards are used as reference points for measuring the concentration or quantity of other substances in biological samples. Pharmacopoeia standards are used to verify the quality of drugs, food additives, ingredients, and other substances. They also serve as reference points for identifying impurities in substances that may be harmful

    Formula:C24H34O4
    Purity:Min. 95%
    Molecular weight:386.50 g/mol

    Ref: 3D-PAA99427

    ne
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Pantoprazole sulfone N-oxide

    CAS:

    Pantoprazole sulfone N-oxide is a prodrug that is converted to the active form pantoprazole in the stomach where it inhibits gastric acid secretion. Pantoprazole sulfone N-oxide has been shown to be genotoxic, and can cause polyvinyl chloride to degrade when stored together. Reconstituted solution of this drug should be used within 24 hours after reconstitution, as the chemical stability of this drug decreases rapidly. Validation studies have been conducted on different analytical methods for determining pantoprazole concentrations in reconstituted solutions, and these methods have been harmonized with those published by the United States Pharmacopeia (USP). The pump inhibitor activity of pantoprazole sulfone N-oxide has been demonstrated in dogs, and it is also useful for treating acid reflux disease in humans. Pantoprazole sulfone N-oxide is unstable at high temperatures (>25°C), so should not be refrigerated or

    Formula:C16H15F2N3O6S
    Purity:Min. 95%
    Molecular weight:415.37 g/mol

    Ref: 3D-ID26757

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • CPI 0610

    CAS:

    CPI 0610 is a medicinal compound that acts as a potent inhibitor of protein phosphorylation. It has been shown to inhibit the cell cycle and promote apoptosis in Chinese hamster ovary cells. CPI 0610 is an effective inhibitor of kinase activity in cancer cells, leading to decreased tumor growth and increased survival rates. In preclinical studies, CPI 0610 has demonstrated efficacy against a wide range of cancers, including breast, prostate, and lung cancer. This inhibitor has also been shown to be effective in human cancer cell lines, making it a promising candidate for future cancer therapies.

    Formula:C20H18ClN3O3
    Purity:Min. 95%
    Molecular weight:383.8 g/mol

    Ref: 3D-VYC72614

    ne
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Diltiazem EP Impurity H

    CAS:

    Diltiazem EP Impurity H is a metabolite of diltiazem that is used as an impurity standard for the drug product. Diltiazem EP Impurity H has a purity level of 99% and is soluble in water. It is synthesized by reacting diltiazem with nitric acid, then hydrolyzing the product to form the desired compound. Diltiazem EP Impurity H can be used as an analytical reference material or a pharmacopoeia for HPLC standards.
    Diltiazem EP Impurity H is a metabolite of diltiazem that is used as an impurity standard for the drug product. Diltiazem EP Impurity H has a purity level of 99% and is soluble in water. It is synthesized by reacting diltiazem with nitric acid, then hydrolyzing the product to form the desired compound. Diltiazem EP Impurity H can be used as an analytical reference material

    Formula:C17H18N2O3S
    Purity:Min. 95%
    Molecular weight:330.4 g/mol

    Ref: 3D-ID181761

    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Way 629 hydrochloride

    CAS:

    Way 629 hydrochloride is a chemical compound that belongs to the class of synthetic, pharmacopoeia and drug development. It is used as an impurity standard and a custom synthesis. Way 629 hydrochloride is also used in the study of metabolism. This compound has been shown to be metabolized by cytochrome P450 enzymes, glucuronidases, glutathione reductase, or conjugation with glucuronic acid.

    Formula:C15H19ClN2
    Purity:Min. 95%
    Molecular weight:262.78 g/mol

    Ref: 3D-HCA75644

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 1-[[4-(3-Methoxypropoxy)-3-methyl-2-pyridinyl]methyl]-2-[[[4-(3-methoxypropoxy)-3-methyl-2-pyridinyl]methyl]sulfonyl]-1H-benzimidazo le

    CAS:
    1-[[4-(3-Methoxypropoxy)-3-methyl-2-pyridinyl]methyl]-2-[(4-(3-methoxypropoxy)-3-methyl-2-pyridinyl)methylsulfonyl]-1H-benzimidazole (MKC1807) is a synthetic drug product. MKC1807 is an analytical standard in the HPLC assay for the determination of Epiandrosterone sulfate and its metabolites. 1-[4-(3-Methoxypropoxy)-3,5,6,7,8 -pentamethylcyclohexyl]methyl 2-[(4-(3 -methoxypropoxy) 3,5,6,7,8 -pentamethylcyclohexyl)methylsulfonyl]-1H benzimidazole has been shown to be a natural metabolite of Epiandrosterone sulfate. This compound
    Formula:C29H36N4O6S
    Purity:Min. 95%
    Molecular weight:568.69 g/mol

    Ref: 3D-IM25352

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Boc-3-hydroxy-1-adamantyl-glycine

    CAS:

    Boc-3-hydroxy-1-adamantyl-glycine is a catalytic, nucleophilic, chiral amino acid that is used in the synthesis of oximes. Boc-3-hydroxy-1-adamantyl-glycine has been shown to be an effective substitute for hydroxylamine in reductive amination reactions and can be used to synthesize some pharmaceuticals, including saxagliptin. This compound is stable under standard conditions and can be easily synthesized. It is also a powerful nucleophile that reacts with electrophiles such as chloroformates and sulfonyl chlorides.

    Formula:C17H27NO5
    Purity:Min. 95%
    Molecular weight:325.4 g/mol

    Ref: 3D-JDC32139

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Pirtenidine

    CAS:

    Pirtenidine is a potent and selective kinase inhibitor that has been shown to inhibit the activity of cyclin-dependent kinases. It has demonstrated promising results in preclinical studies as an anticancer agent, inducing apoptosis in cancer cells. Pirtenidine is an analog of protein kinase inhibitors, which have been used to treat various types of tumors. It has been found to be effective against human cancer cell lines and has shown significant tumor growth inhibition in animal models. Pirtenidine has also been reported to be a potent urine inhibitor of Chinese hamster ovary cells, making it a promising candidate for the treatment of urinary tract cancers.

    Formula:C21H38N2
    Purity:Min. 95%
    Molecular weight:318.5 g/mol

    Ref: 3D-DEA92327

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • N-[1-[3-(4-Ethoxyphenyl)-3,4-dihydro-4-oxopyrido[2,3-d]pyrimidin-2-yl]ethyl]-4-fluoro-N-(3-pyridinylmethyl)-3-(trifluoromethyl)-benz eneacetamide

    CAS:

    N-[1-[3-(4-Ethoxyphenyl)-3,4-dihydro-4-oxopyrido[2,3-d]pyrimidin-2-yl]ethyl]-4-fluoro-N-(3-pyridinylmethyl)-3-(trifluoromethyl)-benz eneacetamide is a drug product that is used in the development of new drugs. It is an analytical standard for HPLC and was created as a natural metabolite from the antibiotic Cefazolin. N-[1-[3-(4-Ethoxyphenyl)-3,4-dihydro-4-oxopyrido[2,3-d]pyrimidin-2-yl]ethyl]-4 -fluoro -N-(3 -pyridinylmethyl) - 3 (trifluoromethyl) - benzeneacetic acid has been shown to inhibit

    Formula:C32H27F4N5O3
    Purity:Min. 95%
    Molecular weight:605.6 g/mol

    Ref: 3D-YTA72268

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Mch-1 antagonist 1

    CAS:

    Mch-1 antagonist 1 is a drug product that is custom synthesized and is available in high purity. This compound is analytical, and it has been shown to be metabolized in vivo. Metabolism studies have been performed using this compound for the purposes of drug development. CAS No. 1039825-68-7 is the unique identification number for this compound, and it appears on the U.S. Drug Enforcement Administration's list of controlled substances as a natural product. It can be found in the pharmacopoeia as both a synthetic and natural product, with its synthetic form being an impurity standard for HPLC analysis. Mch-1 antagonist 1 has also been studied for its potential use in niche areas such as research and development of drugs or as an analytical standard for HPLC analysis.

    Formula:C25H26N4O2
    Purity:Min. 95%
    Molecular weight:414.5 g/mol

    Ref: 3D-PRB82568

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • cis-Tadalafil

    CAS:

    Cis-Tadalafil is a potent inhibitor of phosphodiesterase 5, which is used to treat erectile dysfunction (ED) and primary pulmonary hypertension (PPH). It works by increasing blood flow to the penis, allowing men with ED to achieve and maintain an erection. Cis-Tadalafil is also used to treat symptoms of prostatic hyperplasia (enlarged prostate) in men. This drug has been shown to be effective in treating PPH by reducing pulmonary arterial pressure and improving exercise capacity. Cis-Tadalafil belongs to the carboline class of drugs and is a phosphodiesterase 5 inhibitor that selectively inhibits cGMP-specific phosphodiesterase type 5 (PDE5). This drug has been shown to be highly effective in treating both ED and PPH with minimal side effects.

    Formula:C22H19N3O4
    Purity:Min. 95%
    Color and Shape:White/Off-White Solid
    Molecular weight:389.4 g/mol

    Ref: 3D-FT27987

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Ciprofloxacin ep impurity C

    CAS:

    Ciprofloxacin ep impurity C is a synthetic compound. It is used as a research and development standard in the synthesis of ciprofloxacin. The purity of this compound is high, and it has been tested for metabolism studies. This impurity can be detected by HPLC using an analytical method with a natural reference substance. This impurity has not been evaluated for pharmacopoeia or CAS number.

    Formula:C15H16FN3O3
    Purity:Min. 95%
    Molecular weight:305.30 g/mol

    Ref: 3D-DEA22212

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Oxacyclohexane open ring tacrolimus

    CAS:

    Please enquire for more information about Oxacyclohexane open ring tacrolimus including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C44H71NO13
    Purity:Min. 95%
    Molecular weight:822.04 g/mol

    Ref: 3D-IO183660

    ne
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • (S)-Rabeprazole sodium

    CAS:

    (S)-Rabeprazole sodium is an anticancer drug that acts as a kinase inhibitor. It is an analog of Rabeprazole and has been shown to inhibit the growth of cancer cells in vitro and in vivo. (S)-Rabeprazole sodium inhibits the activity of kinases, which are enzymes that play a key role in cell signaling pathways. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. (S)-Rabeprazole sodium has been tested against various types of cancer, including Chinese hamster ovary cells and tumor xenografts in mice. It has also been shown to inhibit elastin degradation, which is important for preventing metastasis of cancer cells. (S)-Rabeprazole sodium may be a promising candidate for the development of new anticancer drugs that target specific kinases and proteins involved in cancer cell growth and survival.

    Formula:C18H21N3O3S•Na
    Purity:Min. 95%
    Molecular weight:382.43 g/mol

    Ref: 3D-IR183125

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Sacubitril Impurity 2

    CAS:

    Sacubitril Impurity 2 is a drug product that is an analytical impurity in Sacubitril. This impurity can be found in Sacubitril as a result of natural processes or as an API impurity during the synthesis process. Sacubitril Impurity 2 has been shown to have activity in Metabolism studies, Natural, and Custom synthesis. It has been shown to be a Synthetic impurity standard and HPLC standard. Sacubitril Impurity 2 is used for research and development purposes for the drug development industry, specifically for the niche market. It is also used as an analytical standard for pharmacopoeia methods.

    Formula:C24H27NO4
    Purity:Min. 95%
    Molecular weight:393.48 g/mol

    Ref: 3D-IS181152

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • N-Benzyl albuterol

    CAS:

    N-Benzyl albuterol is a drug product that is custom synthesized to be of high purity with an analytical standard. It is used in research and development, pharmaceutical development, and as a pharmacopoeia or analytical standard. N-Benzyl albuterol has been found to be a metabolite of the drug product Albuterol Sulfate. It is also used in metabolism studies and natural product research. The CAS number for this compound is 24085-03-8.

    Formula:C20H27NO3
    Purity:Min. 95%
    Molecular weight:329.4 g/mol

    Ref: 3D-ZAA08503

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • N-Desacetyl thiocolchicoside

    CAS:

    N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.

    Formula:C25H31NO9S
    Purity:Min. 95%
    Molecular weight:521.58 g/mol

    Ref: 3D-CHA99181

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Roflumilast Impurity A

    CAS:

    Roflumilast impurity A is a metabolite of roflumilast. It is a drug product that is used as an analytical standard for the determination of roflumilast in HPLC analysis. Roflumilast impurity A is not natural and is synthetic. It has been shown to be a substrate for CYP1A2, CYP2C8, CYP2C9, and CYP3A4 enzymes. Studies have shown that it may be involved in the metabolism of roflumilast through hydroxylation and deamination.

    Formula:C16H14Cl2N2O3
    Purity:Min. 95%
    Molecular weight:353.2 g/mol

    Ref: 3D-IR168438

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Chlorthalidone impurity E

    CAS:

    Chlorthalidone impurity E is an analytical standard for the HPLC analysis of chlorthalidone in pharmaceutical drug products and is a metabolite of chlorthalidone. Chlorthalidone impurity E is an API impurity that can be found in the synthesis of chlorthalidone, and it has been detected as a minor component in certain drug products. It is important to have an accurate specification for this compound, since it can affect the pharmacological properties of the drug product. The purity level of this compound must be at least 98% or greater to ensure that there are no contaminants present. This compound is also a metabolite of chlorthalidone and is used as a pharmacopoeia reference substance for testing equipment calibration.END>

    Formula:C14H11ClN2O3S
    Purity:Min. 95%
    Molecular weight:322.77 g/mol

    Ref: 3D-IC76330

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Triethylene glycol flufenamate

    CAS:

    Etofenamate impurity

    Formula:C20H22F3NO5
    Purity:Min. 95%
    Color and Shape:Clear Liquid
    Molecular weight:413.39 g/mol

    Ref: 3D-IT58094

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    100mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • [Trp(O)25]-Semaglutide


    Semaglutide impurity.

    Formula:C187H291N45O60
    Molecular weight:4,129.64 g/mol

    Ref: 3D-IS27853

    100mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • GS 441524 triphosphate

    CAS:

    Triphosphorylated form of an antiviral nucleoside analog with activity against zoonotic feline infectious peritonitis virus (FIPV) and severe acute respiratory syndrome (SARS) virus from Coronaviridae family. The compound is the biologically active form of the GS 441524 prodrug and being triphosphorylated, it competes with natural nucleoside triphosphates in cells and interferes with viral RNA synthesis.  Made to order.

    Formula:C12H12N5O13P3·4Na
    Purity:(31P-Nmr) Min. 95 Area-%
    Color and Shape:White Powder
    Molecular weight:531.20 g/mol

    Ref: 3D-FG167050

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product