CymitQuimica logo
APIs for research and impurities

APIs for research and impurities

Active Pharmaceutical Ingredients (APIs) are the substances in drugs responsible for their therapeutic effects. In this section, you will find a wide variety of APIs intended for research use. These compounds are essential for the development, testing, and validation of new pharmaceutical formulations. CymitQuimica offers high-quality APIs to support research in drug discovery and development.

Subcategories of "APIs for research and impurities"

Show 21 more subcategories

Found 57768 products of "APIs for research and impurities"

Sort by

Purity (%)
0
100
|
0
|
50
|
90
|
95
|
100
products per page.
  • 4-(Phthalazin-1-yloxy)aniline

    CAS:

    4-(Phthalazin-1-yloxy)aniline is an analog of cyclin-dependent kinase (CDK) inhibitors that has shown promising anticancer activity. It inhibits the activity of CDKs, which are enzymes involved in regulating cell division and proliferation. This compound has been tested on Chinese hamster ovary cells and has demonstrated potent antiproliferative activity against various cancer cell lines. 4-(Phthalazin-1-yloxy)aniline induces apoptosis in tumor cells, leading to their death. This compound may be a potential candidate for the development of novel anticancer drugs that target CDKs and promote tumor cell death. Additionally, this compound can be detected in urine samples, making it a useful biomarker for cancer diagnosis and monitoring.

    Formula:C14H11N3O
    Purity:Min. 95%
    Molecular weight:237.26 g/mol

    Ref: 3D-ZFA36540

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • N-Acetyl N-descarboxyethyl retigabine d4

    CAS:
    N-Acetyl N-descarboxyethyl retigabine (D4) is a pharmaceutical drug that is used for the treatment of epilepsy. It has been shown to be effective in patients who have not responded to other treatments. D4 binds to voltage-gated potassium channels and inhibits their opening, which leads to a decrease in neurotransmitter release from nerve cells. The mechanism by which D4 induces epileptic seizures is unclear but may be due to its ability to inhibit the activity of GABA receptors in the brain.
    Formula:C15H16FN3O
    Purity:Min. 95%
    Molecular weight:273.3 g/mol

    Ref: 3D-EJA97068

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • m-Glimepiride impurity

    CAS:

    m-Glimepiride impurity is a chemical substance that belongs to the sulfonylurea family. It is used as a pharmaceutical agent for the treatment of type 2 diabetes. The impurity was found in crystalline form and analyzed by HPLC-DAD and HPLC-MS. The purity of m-Glimepiride impurity was determined to be 99%. It is not known whether this impurity has any biological activity.

    Formula:C24H34N4O5S
    Purity:Min. 95%
    Molecular weight:490.62 g/mol

    Ref: 3D-IM25123

    50µg
    Discontinued
    100µg
    Discontinued
    250µg
    Discontinued
    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • 2-[4-(Dimethylamino)-1-(2-methylphenyl)butyl]-phenol

    CAS:

    Please enquire for more information about 2-[4-(Dimethylamino)-1-(2-methylphenyl)butyl]-phenol including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C19H25NO
    Purity:Min. 95%
    Molecular weight:283.4 g/mol

    Ref: 3D-UDA43254

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • N-Methyl metribuzin

    CAS:

    N-Methyl metribuzin is a drug product that belongs to the class of organic compounds known as phenylureas. It is a natural substance, which can be found in plants such as dandelion and rhubarb. Metribuzin has been shown to have pharmacological effects on the human body, including antimetabolite activity, anticancer activity, and anti-inflammatory activities. Metribuzin is metabolized by cytochrome P450 enzymes to form metabolites that are excreted in urine or bile. The metabolites are also active substances and may contribute to the pharmacological effects of metribuzin. Metribuzin can be synthesized from 2-chloro-5-(trifluoromethyl)benzoyl chloride and 3-methylisoxazole.
    Metribuzin is used as an analytical standard for HPLC analysis because it has a high purity level and analytical quality. It is also used in

    Formula:C9H16N4OS
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:228.32 g/mol

    Ref: 3D-GCA74245

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 1-Benzyl-4-methylpiperidin-3-ol 4-methylbenzenesulfonate

    CAS:

    Please enquire for more information about 1-Benzyl-4-methylpiperidin-3-ol 4-methylbenzenesulfonate including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C20H27NO4S
    Purity:Min. 95%
    Molecular weight:377.5 g/mol

    Ref: 3D-TUA04020

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Hydrocortisone 17-valerate 21-acetate

    Controlled Product
    CAS:

    Please enquire for more information about Hydrocortisone 17-valerate 21-acetate including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C28H40O7
    Purity:Min. 95%
    Molecular weight:488.6 g/mol

    Ref: 3D-GDA45646

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Loperamide N-oxide

    CAS:

    Loperamide N-oxide is an analog of loperamide, which is commonly used as an anti-diarrheal medication. It has been shown to have potential anti-cancer properties by inducing apoptosis in cancer cells. Loperamide N-oxide has also been detected in urine samples from Chinese individuals, indicating its potential use as a biomarker for cancer diagnosis. This compound has been found to inhibit trypsin-like kinases, which are enzymes involved in cell division and proliferation. In addition, loperamide N-oxide has been shown to inhibit the growth of tumor cells and may have potential as a therapeutic agent for cancer treatment. However, it should be noted that rifampicin and other inhibitors can reduce the effectiveness of loperamide N-oxide against cancer cells. Further research is needed to fully understand the potential benefits and limitations of this compound.

    Formula:C29H33ClN2O3
    Purity:Min. 95%
    Molecular weight:493 g/mol

    Ref: 3D-SIA47103

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Azelastine N-oxide, mixture of diastereomers

    CAS:
    Azelastine N-oxide is a racemic form of azelastine, an antihistamine. The crystal structure of azelastine N-oxide has been determined by X-ray crystallography and found to be identical to the structure of azelastine. Azelastine N-oxide is used in assays as a racemic mixture with azelastine, but can also be used as an n-oxide. Azelastine N-oxide inhibits the activity of CYP1A2, CYP2C9, CYP2C19 and CYP3A4 enzymes in microsomes. It also blocks xanthine oxidase and prevents the formation of reactive oxygen species.
    Formula:C22H24ClN3O2
    Purity:Min. 95%
    Molecular weight:397.9 g/mol

    Ref: 3D-QAB27988

    100mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • (2S,2R,Trans)-saxagliptin

    CAS:

    (2S,2R,Trans)-saxagliptin is an anti-diabetic drug that belongs to the thiazolidinedione class of drugs. It is a synthetic compound that is metabolized by cytochrome P450 enzymes and excreted in urine. (2S,2R,Trans)-saxagliptin has been shown to inhibit the synthesis of glucose in liver cells and to lower blood glucose levels in diabetic animals. In addition, it has been shown to have anti-inflammatory effects by inhibiting the production of TNF-α and IL-6 cytokines.

    Formula:C18H25N3O2
    Purity:Min. 95%
    Molecular weight:315.40 g/mol

    Ref: 3D-PMC26598

    1mg
    Discontinued
    Discontinued product
  • Lumiflavin 5-oxide

    CAS:

    Lumiflavin 5-oxide is a metabolite of lumiflavin. It is a synthetic compound that is used as an analytical reference standard for impurities in lumiflavin and other pharmaceuticals. Lumiflavin 5-oxide has been shown to be metabolized through the cytochrome P450 system, with oxidative metabolites being formed by CYP1A2 and CYP3A4. Lumiflavin 5-oxide has also been shown to be a competitive inhibitor of NAD+-dependent enzymes such as glycerol kinase, phosphofructokinase, lactate dehydrogenase, alcohol dehydrogenase, and glucose 6-phosphate dehydrogenase.

    Formula:C13H12N4O3
    Purity:Min. 95%
    Molecular weight:272.26 g/mol

    Ref: 3D-LBA99593

    100mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • (4-Chlorophenyl)[4-(1-methylethoxy)phenyl]methanone

    CAS:
    (4-Chlorophenyl)[4-(1-methylethoxy)phenyl]methanone is a drug product that is Custom synthesized to meet the requirements of pharmacopoeia, analytical, and drug development. It has been studied for its metabolism and toxicity profile in animals. This compound is a metabolite of chlorpheniramine, which is used as an antihistamine. Metabolites of this compound have also been identified in humans. The CAS Registry Number for this compound is 154356-96-4.
    Formula:C16H15ClO2
    Purity:Min. 95%
    Molecular weight:274.74 g/mol

    Ref: 3D-IC20310

    1g
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • (+)-Cis-phenothrin

    CAS:

    Cis-phenothrin is a carbamate insecticide that is used in agriculture, public health, and veterinary medicine. It has been shown to have a high degree of toxicity to mosquitoes and other pests. Cis-phenothrin acts as an acetylcholinesterase inhibitor, preventing the breakdown of acetylcholine by enzymes in the central nervous system. This allows acetylcholine levels to build up and produce toxic effects on insects such as paralysis or death. Cis-phenothrin has also been shown to be toxic to bacteria in vitro studies. It inhibits bacterial growth by binding to fatty acids and fatty acid synthases, which are essential for bacterial cell wall integrity. The inhibition of this enzyme leads to increased membrane permeability and cell lysis.

    Formula:C23H26O3
    Purity:Min. 95%
    Molecular weight:350.4 g/mol

    Ref: 3D-BCA18688

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • N-Formyl Saxagliptin


    N-Formyl Saxagliptin is an analytical standard for HPLC. It is used as a drug development and API impurity in the pharmaceutical industry. It was synthesized by reacting formaldehyde with the amino acid L-glutamic acid, followed by purification to remove any other contaminants. The CAS number for this chemical is 57847-82-0.

    Purity:Min. 95%

    Ref: 3D-IF162360

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Tenofovir disoproxil

    CAS:

    Tenofovir disoproxil is the disoproxil fumarate salt of tenofovir. It is a nucleoside reverse transcriptase inhibitor that has been shown to be effective in the treatment of chronic hepatitis B virus (HBV) in combination with emtricitabine and as a single agent in the treatment of HIV-1 infection. Tenofovir disoproxil is available as tablets, capsules, or oral solution. The drug has been shown to cause an increase in serum creatinine levels, which may be due to inhibition of renal tubular secretion of creatinine by tenofovir. This drug should not be used with alafenamide and tenofovir because it can lead to kidney failure and death.

    Formula:C17H28N5O7P·(C4H4O4)
    Purity:Min. 95%
    Molecular weight:445.41 g/mol

    Ref: 3D-XGC28415

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Moexipril diketopiperazine

    CAS:

    Moexipril diketopiperazine is a drug product that is custom synthesized in a high purity and analytical grade. It is metabolized through metabolism studies and has been shown to have natural, synthetic, impurity and research and development standards. Moexipril diketopiperazine has CAS No. 103733-51-3. It has been shown to be a metabolite of Moexipril hydrochloride, which is an angiotensin II receptor antagonist used to treat hypertension and congestive heart failure. This product is also used as a standard for HPLC analysis.

    Formula:C27H32N2O6
    Purity:Min. 95%
    Molecular weight:480.6 g/mol

    Ref: 3D-DEA73351

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • L(+)-2-Amino-5-phosphonovaleric acid

    CAS:

    L-2-Amino-5-phosphonovaleric acid is an inhibitory neurotransmitter that binds to the GABAA receptor. It is used in the treatment of bladder disorders, such as urinary frequency, urgency, and incontinence. L-2-Amino-5-phosphonovaleric acid has been shown to have a depressant effect on the central nervous system and can cause symptoms such as nausea, vomiting, and headache. This drug also has antimicrobial properties due to its ability to inhibit bacterial enzyme activities. L-2-Amino-5-phosphonovaleric acid blocks glutamate receptors in mouse hippocampal cells by binding the alpha1 subunit of the GABAA receptor. This prevents the influx of calcium ions into cells and inhibits phosphorylation of protein kinase C. L(+)-2-Amino-5-phosphonovaleric acid also inhibits pentosan polysulfate sodium,

    Formula:C5H12NO5P
    Purity:Min. 95%
    Molecular weight:197.13 g/mol

    Ref: 3D-EDA05567

    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • RS 67506 hydrochloride

    CAS:

    RS 67506 hydrochloride is a biochemical that is used in experimental and descriptor studies. The ketone group has been found to be an important part of the molecular structure. RS 67506 hydrochloride has been shown to have a number of biological properties, including inhibition of the synthesis of neurotransmitters such as dopamine, serotonin and norepinephrine; it also has anti-nervous system activity. This chemical was also found to inhibit the synthesis of prostaglandin E2 in human neutrophils. It is hypothesized that RS 67506 hydrochloride may inhibit phospholipase A2, which would prevent the release of arachidonic acid from phospholipids into the cell membrane and block the production of eicosanoids.

    Formula:C18H29Cl2N3O4S
    Purity:Min. 95%
    Molecular weight:454.4 g/mol

    Ref: 3D-TGA98661

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • CPI 0610

    CAS:

    CPI 0610 is a medicinal compound that acts as a potent inhibitor of protein phosphorylation. It has been shown to inhibit the cell cycle and promote apoptosis in Chinese hamster ovary cells. CPI 0610 is an effective inhibitor of kinase activity in cancer cells, leading to decreased tumor growth and increased survival rates. In preclinical studies, CPI 0610 has demonstrated efficacy against a wide range of cancers, including breast, prostate, and lung cancer. This inhibitor has also been shown to be effective in human cancer cell lines, making it a promising candidate for future cancer therapies.

    Formula:C20H18ClN3O3
    Purity:Min. 95%
    Molecular weight:383.8 g/mol

    Ref: 3D-VYC72614

    ne
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Quinidine methiodide

    CAS:

    Quinidine is a drug that has been used in the treatment of cardiac arrhythmias and as an antiarrhythmic. It is an uncharged compound that can cross cell membranes by passive diffusion. Quinidine binds to the sodium ion channel, which is the pore through which sodium ions enter the cell, and causes it to close, thereby preventing them from entering the cell. This leads to decreased conductance of nerve impulses and a decrease in membrane potential. The effectiveness of quinidine is dependent on its concentration and on the duration of exposure to this drug.

    Formula:C21H27IN2O2
    Purity:Min. 95%
    Molecular weight:466.4 g/mol

    Ref: 3D-SBA98287

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 6-o-Benzyl-4-dehydroxy-4-dimethylphenylsilyl entecavir

    CAS:
    6-o-Benzyl-4-dehydroxy-4-dimethylphenylsilyl entecavir is a synthetic drug product with an API impurity. It's an analytical standard for the metabolite 6-o-benzylidene-4,6-didehydroentecavir (CAS 649761-24-0), which is a natural metabolite of entecavir. The impurity standard is used in research and development to study the drug product's metabolism and to ensure that it meets pharmacopeia standards.
    Formula:C27H31N5O2Si
    Purity:Min. 95%
    Molecular weight:485.7 g/mol

    Ref: 3D-ZAB76124

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • tert-Butyl 4-(4-amino-6,7-dimethoxyquinazolin-2-yl)piperazine-1-carboxylate

    CAS:
    tert-Butyl 4-(4-amino-6,7-dimethoxyquinazolin-2-yl)piperazine-1-carboxylate is an impurity that is found in the production of tert-butyl 4-(4,5,6,7,8,9,10-hexahydrobenzo[a]pyrido[1,2:4,3]triazin-2(3H)-yl)piperazine-1 carboxylate. It has been used as a reference standard for HPLC. This compound is not active when administered orally and does not exhibit any pharmacological activity.
    Formula:C19H27N5O4
    Purity:Min. 95%
    Molecular weight:389.4 g/mol

    Ref: 3D-KAC93966

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Oxybutynin impurity C

    CAS:

    Oxybutynin impurity C is a metabolite of the drug product Oxybutynin (CAS No. 1199574-70-3). It is an analytical standard for HPLC, and a natural impurity in the synthesis of Oxybutynin. This is a synthetic compound that has been shown to be metabolized through oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. Oxybutynin impurity C has been used as an analytical reference material for drug development and research and development.

    Purity:Min. 95%

    Ref: 3D-FO171021

    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Tiotropium EP Impurity I

    CAS:

    Tiotropium EP Impurity I is an impurity found in the API, Tiotropium EP. It is a natural product that is synthesized by chemical synthesis. The synthetic purity of Tiotropium EP Impurity I is high and complies with pharmacopoeia guidelines. This impurity can be used as a standard to test the quality of other products or to research the metabolism of Tiotropium EP.

    Formula:C19H22BrNO4S2
    Purity:Min. 95%
    Molecular weight:472.40 g/mol

    Ref: 3D-LFA52148

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Trazodone Hydrochloride BP Impurity A

    CAS:
    Trazodone Hydrochloride BP Impurity A is an unproven impurity of Trazodone. It inhibits the uptake of serotonin by 5-HT receptors, which may be important in the treatment of depression. This compound also inhibits platelet aggregation and has been found to inhibit the activity of tricyclic compounds, such as piperazine and propionic acid.
    Formula:C19H22CIN5O2
    Purity:Min. 95%
    Molecular weight:491.33 g/mol

    Ref: 3D-IT171024

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Mch-1 antagonist 1

    CAS:

    Mch-1 antagonist 1 is a drug product that is custom synthesized and is available in high purity. This compound is analytical, and it has been shown to be metabolized in vivo. Metabolism studies have been performed using this compound for the purposes of drug development. CAS No. 1039825-68-7 is the unique identification number for this compound, and it appears on the U.S. Drug Enforcement Administration's list of controlled substances as a natural product. It can be found in the pharmacopoeia as both a synthetic and natural product, with its synthetic form being an impurity standard for HPLC analysis. Mch-1 antagonist 1 has also been studied for its potential use in niche areas such as research and development of drugs or as an analytical standard for HPLC analysis.

    Formula:C25H26N4O2
    Purity:Min. 95%
    Molecular weight:414.5 g/mol

    Ref: 3D-PRB82568

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Desacetyl bisacodyl β-D-glucuronide

    CAS:

    Desacetyl bisacodyl β-D-glucuronide is a drug product that is used as an impurity standard in analytical chemistry. It is a synthetic chemical that has been custom synthesized for research and development of drugs. The CAS number for this compound is 31050-47-2 and the molecular weight is 526.25 g/mol. This compound has not been approved by the FDA, but it has been shown to be pharmacologically active in animal studies. Desacetyl bisacodyl β-D-glucuronide can be ordered from our website at www.customsynthesislab.com

    Formula:C24H23NO8
    Purity:Min. 95%
    Molecular weight:453.4 g/mol

    Ref: 3D-GBA05047

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Albendazole impurity F

    CAS:

    Albendazole is an anti-helminthic drug that is structurally classified as a benzimidazole. It has been shown to be effective against a variety of helminths, including roundworms, pinworms, hookworms, and tapeworms. Albendazole impurity F is an analytical standard for the determination of albendazole in pharmaceutical products by HPLC. It also serves as a reference substance to establish the purity of drug products containing albendazole and its metabolites. Albendazole impurity F is not considered to be a metabolite of albendazole because it has been shown to be stable under acidic conditions and can be synthesized from other starting materials.

    Formula:C10H11N3O2S
    Purity:Min. 95%
    Molecular weight:237.28 g/mol

    Ref: 3D-IA71873

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • trans-4-(Aminomethyl)cyclohexanecarboxylic acid

    CAS:

    Trans-4-(aminomethyl)cyclohexanecarboxylic acid (AMCA) is a histamine antagonist that is used to treat bowel disease. It may also be useful for the treatment of other inflammatory diseases and as an anticoagulant. AMCA has been shown to be safe and effective for the prevention of postoperative bleeding in patients who are undergoing major surgery. This drug is a potent inhibitor of platelet aggregation, but does not affect the function of erythrocytes or leukocytes. AMCA inhibits platelet aggregation by blocking the binding of adenosine diphosphate (ADP) to its receptor on platelets, thus inhibiting ADP-mediated activation of phospholipase A2 and arachidonic acid release from membranes. An increase in blood levels of AMCA may lead to cardiac toxicity and bleeding events.

    Formula:C8H15NO2
    Purity:Min. 95%
    Molecular weight:157.21 g/mol

    Ref: 3D-IA71533

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Boc-3-hydroxy-1-adamantyl-glycine

    CAS:

    Boc-3-hydroxy-1-adamantyl-glycine is a catalytic, nucleophilic, chiral amino acid that is used in the synthesis of oximes. Boc-3-hydroxy-1-adamantyl-glycine has been shown to be an effective substitute for hydroxylamine in reductive amination reactions and can be used to synthesize some pharmaceuticals, including saxagliptin. This compound is stable under standard conditions and can be easily synthesized. It is also a powerful nucleophile that reacts with electrophiles such as chloroformates and sulfonyl chlorides.

    Formula:C17H27NO5
    Purity:Min. 95%
    Molecular weight:325.4 g/mol

    Ref: 3D-JDC32139

    2mg
    Discontinued
    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Glipizide EP Impurity F

    CAS:

    Glipizide EP Impurity F is a synthetic impurity that is used as a research and development impurity standard. It has high purity and is pharmacopoeia grade. Glipizide EP Impurity F is also a metabolite of the drug product Glipizide and has been shown to have analytical applications for pharmacokinetic studies. It can be synthesized from natural materials or can be custom synthesized depending on the needs of the customer.

    Formula:C11H16N2O4S
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:272.32 g/mol

    Ref: 3D-FG180969

    ne
    Discontinued
    1g
    Discontinued
    Discontinued product
  • Ergosterone

    Controlled Product
    CAS:

    Ergosterone is a potent anticancer agent that has been shown to induce apoptosis in various human cancer cell lines. It is a natural compound found in the urine of Chinese medicine practitioners and has been used for its medicinal properties for centuries. Ergosterone works by inhibiting the activity of certain proteins involved in the cell cycle, leading to inhibition of cancer cell growth. This inhibitor has shown promising results as an anticancer agent in preclinical studies and may offer a new avenue for cancer treatment.

    Formula:C28H42O
    Purity:Min. 95%
    Molecular weight:394.6 g/mol

    Ref: 3D-SAA39857

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • L-Valine 2-hydroxyethyl ester tosylate

    CAS:

    L-Valine 2-hydroxyethyl ester tosylate (L-V2HT) is a drug product that is synthesized by custom synthesis. It has high purity, analytical, and natural properties. L-V2HT is metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. The active form of L-V2HT is metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. L-V2HT also specifically binds to markers expressed at high levels in Mycobacterium tuberculosis strains (e.g., ESX-1 secretion system protein) and inhibits cell

    Formula:C14H23NO6S
    Purity:Min. 95%
    Molecular weight:333.4 g/mol

    Ref: 3D-IV178763

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Fosfomycin trometamol EP impurity A disodium

    CAS:

    Fosfomycin trometamol EP impurity A disodium is a research and development impurity standard. It is a custom synthesis that is used as a drug product, synthetic, high purity, pharmacopoeia, drug development, metabolite, niche, analytical and natural. Fosfomycin trometamol EP impurity A disodium has been shown to have an HPLC standard and CAS No. 84954-80-3(free base).

    Purity:Min. 95%

    Ref: 3D-IF181157

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Sitagliptin Hydrazine Diamide impurity

    CAS:

    Sitagliptin Hydrazine Diamide impurity is an analytical reference material that has been manufactured in accordance with the requirements of the United States Pharmacopeia (USP) and the European Pharmacopoeia (EP). The material is a white to off-white crystalline powder. It has a purity of 99.9% with a specific gravity of 1.06 g/cm3 and a melting point of 176-177°C. This material is an impurity standard for Sitagliptin Hydrazine Diamide, CAS No. 2072867-07-1, which is used as an anti-diabetic drug product in niche markets.

    Formula:C26H23F9N6O2
    Purity:Min. 95%
    Molecular weight:622.49 g/mol

    Ref: 3D-IS106474

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • cis-Tadalafil

    CAS:

    Cis-Tadalafil is a potent inhibitor of phosphodiesterase 5, which is used to treat erectile dysfunction (ED) and primary pulmonary hypertension (PPH). It works by increasing blood flow to the penis, allowing men with ED to achieve and maintain an erection. Cis-Tadalafil is also used to treat symptoms of prostatic hyperplasia (enlarged prostate) in men. This drug has been shown to be effective in treating PPH by reducing pulmonary arterial pressure and improving exercise capacity. Cis-Tadalafil belongs to the carboline class of drugs and is a phosphodiesterase 5 inhibitor that selectively inhibits cGMP-specific phosphodiesterase type 5 (PDE5). This drug has been shown to be highly effective in treating both ED and PPH with minimal side effects.

    Formula:C22H19N3O4
    Purity:Min. 95%
    Color and Shape:White/Off-White Solid
    Molecular weight:389.4 g/mol

    Ref: 3D-FT27987

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Acarbose Impurity E

    CAS:

    Acarbose Impurity E is an impurity found in acarbose. It is a natural, API impurity and is a synthetic impurity standard. Acarbose Impurity E has been used in drug development research and development, as well as in the HPLC analysis of acarbose to generate a pharmacopoeia-grade purity standard.

    Purity:Min. 95%

    Ref: 3D-FA175652

    ne
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Pramipexole EP Impurity C

    CAS:

    Pramipexole EP Impurity C is a synthetic impurity that is used as an impurity standard in the manufacture of Pramipexole EP. It is also used as a research and development tool for drug product, custom synthesis, CAS No. 1973461-14-1, and analytical studies. This compound has been shown to be a metabolite of Pramipexole EP and may have pharmacological properties. Pramipexole EP Impurity C has been found to inhibit the growth of certain bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA) isolates.

    Formula:C20H32N6S2
    Purity:Min. 95%

    Ref: 3D-FP165425

    25µg
    Discontinued
    50µg
    Discontinued
    100µg
    Discontinued
    250µg
    Discontinued
    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Piperacilloic acid

    CAS:

    Piperacilloic acid is a synthetic compound that exhibits antibacterial activity. It has been shown to be effective against human pathogens, including urothelial carcinoma and human serum. Piperacilloic acid binds to the amino acids lysine and arginine in bacterial proteins and inhibits protein synthesis by inhibiting the function of enzymes that require these amino acids for their activity. The potency of piperacillin is low, but it is activated by hydrolysis in the acidic environment of the stomach or intestinal tract. Piperacilloic acid also has potential as a contraceptive agent because it may inhibit transcriptional regulation of genes that are involved in sperm production.

    Formula:C23H29N5O8S
    Purity:(Elemental Analysis) Min. 90 Area-%
    Color and Shape:Powder
    Molecular weight:535.57 g/mol

    Ref: 3D-FP27061

    0.05mg
    Discontinued
    0.1mg
    Discontinued
    0.25mg
    Discontinued
    0.5mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Dicyclopropylamine hydrochloride

    CAS:

    Dicyclopropylamine hydrochloride is a tyrosine kinase inhibitor that blocks the activity of jak2. It is an innovative molecule with the potential to be used in cancer treatment. Dicyclopropylamine hydrochloride has been shown to inhibit activation of tyrosine kinases, which are involved in cell signaling and proliferation. Dicyclopropylamine hydrochloride also has anti-inflammatory properties, which may be due to its ability to inhibit prostaglandin synthesis. This drug is not expected to have any toxicity or side effects because it can be easily metabolized by the liver.br>br> Dicyclopropylamine hydrochloride is a white solid with a melting point of 175°C. It has no detectable odor, and it is soluble in water and ethanol. The impurities found in this compound include myristic acid and amines, which can cause inflammatory diseases.br>br> D

    Formula:C6H11N•HCl
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:133.62 g/mol

    Ref: 3D-FD141573

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • N-Hydroxymethyl Sumatriptan

    CAS:

    N-Hydroxymethyl Sumatriptan is an analytical standard and a research and development impurity. It is also used as an API impurity in drug product manufacturing. N-Hydroxymethyl Sumatriptan can be synthesized by reacting the parent drug with hydroxyl radicals, which is a process that yields no side products. N-Hydroxymethyl Sumatriptan can be found in the following pharmacopoeia: United States Pharmacopoeia (USP) 11>, European Pharmacopoeia (EP), Japanese Pharmacopoeia (JP)13>, British Pharmacopoeia (BP), and Chinese Pharmacopiae (CPC).

    Formula:C15H23N3O3S
    Purity:Min. 95%
    Molecular weight:325.43 g/mol

    Ref: 3D-FH175834

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • N-Benzyl albuterol

    CAS:

    N-Benzyl albuterol is a drug product that is custom synthesized to be of high purity with an analytical standard. It is used in research and development, pharmaceutical development, and as a pharmacopoeia or analytical standard. N-Benzyl albuterol has been found to be a metabolite of the drug product Albuterol Sulfate. It is also used in metabolism studies and natural product research. The CAS number for this compound is 24085-03-8.

    Formula:C20H27NO3
    Purity:Min. 95%
    Molecular weight:329.4 g/mol

    Ref: 3D-ZAA08503

    50mg
    Discontinued
    100mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • N-Nitroso dorzolamide


    N-Nitroso dorzolamide is a chemical compound used as an intermediate in the synthesis of dorzolamide, a carbonic anhydrase inhibitor used in the treatment of glaucoma and ocular hypertension.

    Formula:C10H15N3O5S3
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:353.44 g/mol

    Ref: 3D-IN182764

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Sacubitril Impurity 2

    CAS:

    Sacubitril Impurity 2 is a drug product that is an analytical impurity in Sacubitril. This impurity can be found in Sacubitril as a result of natural processes or as an API impurity during the synthesis process. Sacubitril Impurity 2 has been shown to have activity in Metabolism studies, Natural, and Custom synthesis. It has been shown to be a Synthetic impurity standard and HPLC standard. Sacubitril Impurity 2 is used for research and development purposes for the drug development industry, specifically for the niche market. It is also used as an analytical standard for pharmacopoeia methods.

    Formula:C24H27NO4
    Purity:Min. 95%
    Molecular weight:393.48 g/mol

    Ref: 3D-IS181152

    1mg
    Discontinued
    10mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • 3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride

    CAS:

    3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride is a versatile compound with various characteristics and applications. It has been found to have diverse effects on different biological processes. This compound has shown potential as an antimuscarinic agent, which means it can block the action of acetylcholine at muscarinic receptors in the body.

    Formula:C19H25ClN2O2
    Purity:Min. 95%
    Molecular weight:348.9 g/mol

    Ref: 3D-WMD18565

    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    Discontinued product
  • (4-Chlorophenyl)diphenylmethanol

    CAS:

    Please enquire for more information about (4-Chlorophenyl)diphenylmethanol including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C19H15ClO
    Purity:Min. 95%
    Molecular weight:294.8 g/mol

    Ref: 3D-GAA92289

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Oxacyclohexane open ring tacrolimus

    CAS:

    Please enquire for more information about Oxacyclohexane open ring tacrolimus including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C44H71NO13
    Purity:Min. 95%
    Molecular weight:822.04 g/mol

    Ref: 3D-IO183660

    ne
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Ciprofloxacin ep impurity C

    CAS:

    Ciprofloxacin ep impurity C is a synthetic compound. It is used as a research and development standard in the synthesis of ciprofloxacin. The purity of this compound is high, and it has been tested for metabolism studies. This impurity can be detected by HPLC using an analytical method with a natural reference substance. This impurity has not been evaluated for pharmacopoeia or CAS number.

    Formula:C15H16FN3O3
    Purity:Min. 95%
    Molecular weight:305.30 g/mol

    Ref: 3D-DEA22212

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 2-(2-Amino-5-bromobenzoyl)pyridine

    CAS:

    2-(2-Amino-5-bromobenzoyl)pyridine (2ABBP) is a chemical compound with the molecular formula C10H7BrN3. It is a glucuronide conjugate of 2-amino-5-bromobenzoic acid and has been used as an immunological reagent in the form of a monoclonal antibody. 2ABBP binds to dryopteris, which is a plant species that contains polyphenols called pteridines. 2ABBP has been shown to have anti-inflammatory properties in rat liver microsomes and cell culture experiments. The mechanism of action may involve inhibition of cyclooxygenase enzymes, which are involved in prostaglandin synthesis. 2ABBP also binds to human serum albumin and chaperones, proteins that bind other proteins or small molecules. The biological activity of 2ABBP may be due to its ability to form coval

    Formula:C12H9BrN2O
    Purity:Min. 95%
    Molecular weight:277.12 g/mol

    Ref: 3D-IA17613

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    500mg
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    250g
    Discontinued
    Discontinued product
  • Empagliflozin S-furanose

    CAS:

    Empagliflozin S-furanose is a Custom synthesis drug product. It is an analytical standard with CAS No. 1620758-32-8, and it is used in research and development of new drugs. Empagliflozin S-furanose has been found to be a metabolite of empagliflozin, a drug that is used to treat type 2 diabetes mellitus. It is also used as an impurity standard for HPLC analysis of empagliflozin because it does not have any biological activity.

    Formula:C23H27ClO7
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:450.91 g/mol

    Ref: 3D-IE181148

    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Simvastatin acid

    CAS:

    Simvastatin acid is the active form of simvastatin, a drug used to lower blood cholesterol levels. Simvastatin acid inhibits HMG-CoA reductase, the enzyme that converts HMG-CoA to mevalonate. This conversion is a rate-limiting step in the synthesis of cholesterol and other lipids. Simvastatin acid binds to polymerase chain and drug transporter proteins, which leads to cell lysis. The concentration–time curve for simvastatin acid is linear and the half-life is approximately 12 hours. When simvastatin acid is administered with drugs that are potent inducers of CYP3A4 or UGT1A1 enzymes, there may be an increased risk for drug interactions. Simvastatin acid has shown no significant human pharmacokinetic interactions with food or grapefruit juice at doses up to 200 mg/day. There are limited data on the pharmacokinetics of simvastatin

    Formula:C25H40O6
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:436.58 g/mol

    Ref: 3D-IS63828

    ne
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Tofacitinib dihydro impurity

    CAS:

    Tofacitinib dihydro impurity is a research and development impurity standard for the synthesis of Tofacitinib. It is a custom synthesis with high purity, pharmacopoeia grade, and synthetic. This product is also used in drug development for metabolism studies and analytical applications.

    Formula:C16H22N6O
    Purity:Min. 95%
    Molecular weight:314.39 g/mol

    Ref: 3D-QQC97235

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Linagliptin impurity G

    CAS:

    Linagliptin impurity G is an impurity in the drug product Linagliptin. It is a natural substance and its CAS number is 668270-11-9. Impurity G can be synthesized from L-phenylalanine and cyclohexane carboxaldehyde in a two step process. The first step involves the reaction of L-phenylalanine with cyclohexane carboxaldehyde to yield methylcyclohexanecarboxylate, which then undergoes hydrolysis to give phenylcyclohexanol. In the second step, phenylcyclohexanol reacts with hydrochloric acid to produce phenylcyclohexanone, which is then oxidized with hydrogen peroxide to yield impurity G. Impurity G can also be found in the pharmacopoeia as a high purity HPLC standard for linagliptin.

    Formula:C25H28N8O2
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:472.54 g/mol

    Ref: 3D-FA146003

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    250mg
    Discontinued
    100mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    Discontinued product
  • (S)-Rabeprazole sodium

    CAS:

    (S)-Rabeprazole sodium is an anticancer drug that acts as a kinase inhibitor. It is an analog of Rabeprazole and has been shown to inhibit the growth of cancer cells in vitro and in vivo. (S)-Rabeprazole sodium inhibits the activity of kinases, which are enzymes that play a key role in cell signaling pathways. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. (S)-Rabeprazole sodium has been tested against various types of cancer, including Chinese hamster ovary cells and tumor xenografts in mice. It has also been shown to inhibit elastin degradation, which is important for preventing metastasis of cancer cells. (S)-Rabeprazole sodium may be a promising candidate for the development of new anticancer drugs that target specific kinases and proteins involved in cancer cell growth and survival.

    Formula:C18H21N3O3S•Na
    Purity:Min. 95%
    Molecular weight:382.43 g/mol

    Ref: 3D-IR183125

    25mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • N-Desacetyl thiocolchicoside

    CAS:

    N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.

    Formula:C25H31NO9S
    Purity:Min. 95%
    Molecular weight:521.58 g/mol

    Ref: 3D-CHA99181

    50mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Ivermectin impurity I

    CAS:

    Ivermectin impurity I is an analytical standard that is used for pharmacopoeia and custom synthesis. It is a natural metabolite of the drug Ivermectin, which has been shown to have anti-inflammatory properties in mice. Ivermectin impurity I binds to nicotinic acetylcholine receptors, leading to muscle paralysis and death. This compound is found in high purity for research and development purposes.

    Formula:C48H74O14
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:875.09 g/mol

    Ref: 3D-II167729

    1mg
    Discontinued
    5mg
    Discontinued
    2mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Rocuronium Bromide EP Impurity F Bromide

    CAS:
    Rocuronium Bromide EP Impurity F Bromide is an impurity found in Rocuronium Bromide EP. It is a natural component of the drug product, which is a synthetic drug. The metabolite of this impurity is also found in the natural product, although at much lower concentrations. This impurity has been shown to be present as an analytical impurity in the API and custom synthesis process. This impurity standard has been synthesized synthetically for use in drug development and research and development, as well as for use in HPLC standards.
    Formula:C34H55N2O4·Br
    Purity:Min. 95%
    Molecular weight:635.72 g/mol

    Ref: 3D-IR178405

    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Roflumilast Impurity A

    CAS:

    Roflumilast impurity A is a metabolite of roflumilast. It is a drug product that is used as an analytical standard for the determination of roflumilast in HPLC analysis. Roflumilast impurity A is not natural and is synthetic. It has been shown to be a substrate for CYP1A2, CYP2C8, CYP2C9, and CYP3A4 enzymes. Studies have shown that it may be involved in the metabolism of roflumilast through hydroxylation and deamination.

    Formula:C16H14Cl2N2O3
    Purity:Min. 95%
    Molecular weight:353.2 g/mol

    Ref: 3D-IR168438

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • (3S,4R)-Tofacitinib

    CAS:

    (3S,4R)-Tofacitinib is a rhombic and paramagnetic compound with a Curie point of approximately 10.6°C. It is soluble in nonpolar solvents such as benzene and toluene. (3S,4R)-Tofacitinib has been shown to have magnetic properties that are dependent on the temperature and the frequency of the applied magnetic field. The paramagnetic resonance spectra were observed at 18°C and 32°C, while the paramagnetic resonance spectrum was observed at -2°C. The octahedral interactions are likely due to the presence of six different types of iron ions in the crystal structure.

    Formula:C16H20N6O
    Purity:Min. 95%
    Molecular weight:312.37 g/mol

    Ref: 3D-STB57848

    2mg
    Discontinued
    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Desfluoro ezetimibe

    CAS:

    Desfluoro ezetimibe is a synthetic cholesterol-lowering drug that inhibits intestinal cholesterol absorption. It is chemically synthesized, and the process includes the introduction of fluorine at the 3-position of the C-ring. Desfluoro ezetimibe is not metabolized in humans, but it may be subject to oxidative degradation. The product is also subject to oxidation by light and air, which may result in formation of impurities. The drug substance has been validated as well as its isomers and efficiencies in mass spectrometry detection.

    Formula:C24H22FNO3
    Purity:Min. 95%
    Color and Shape:White To Off-White Solid
    Molecular weight:391.43 g/mol

    Ref: 3D-FD21193

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Terbinafine dihydrochloride

    CAS:

    Terbinafine is a drug used in the treatment of onychomycosis, tinea versicolor and dandruff. It belongs to the group of medicines known as antifungals and inhibits the growth of fungi by inhibiting their ability to make proteins. Terbinafine dihydrochloride is a form of terbinafine that is more soluble in water than terbinafine hydrochloride and can be used as a lubricant. Terbinafine hydrochloride is an industrial product that is used as a disintegrant in tablets and capsules.

    Formula:C36H40N2
    Purity:Min. 95%
    Molecular weight:500.7 g/mol

    Ref: 3D-JMB36523

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Chlorthalidone impurity E

    CAS:

    Chlorthalidone impurity E is an analytical standard for the HPLC analysis of chlorthalidone in pharmaceutical drug products and is a metabolite of chlorthalidone. Chlorthalidone impurity E is an API impurity that can be found in the synthesis of chlorthalidone, and it has been detected as a minor component in certain drug products. It is important to have an accurate specification for this compound, since it can affect the pharmacological properties of the drug product. The purity level of this compound must be at least 98% or greater to ensure that there are no contaminants present. This compound is also a metabolite of chlorthalidone and is used as a pharmacopoeia reference substance for testing equipment calibration.END>

    Formula:C14H11ClN2O3S
    Purity:Min. 95%
    Molecular weight:322.77 g/mol

    Ref: 3D-IC76330

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • [Trp(O)25]-Semaglutide


    Semaglutide impurity.

    Formula:C187H291N45O60
    Molecular weight:4,129.64 g/mol

    Ref: 3D-IS27853

    100mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Triethylene glycol flufenamate

    CAS:

    Etofenamate impurity

    Formula:C20H22F3NO5
    Purity:Min. 95%
    Color and Shape:Clear Liquid
    Molecular weight:413.39 g/mol

    Ref: 3D-IT58094

    500mg
    Discontinued
    2g
    Discontinued
    100mg
    Discontinued
    1g
    Discontinued
    10g
    Discontinued
    5g
    Discontinued
    Discontinued product
  • Gly-OH9-Oxytocin

    CAS:

    Oxytocin impurity

    Formula:C43H65N11O13S2
    Molecular weight:1,008.18 g/mol

    Ref: 3D-IO22698

    100mg
    Discontinued
    Discontinued product
  • D-6-Cyano-6-norlysergic acid methyl ester

    CAS:

    Please enquire for more information about D-6-Cyano-6-norlysergic acid methyl ester including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C17H15N3O2
    Purity:Min. 95%
    Molecular weight:293.32 g/mol

    Ref: 3D-FBA33404

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    100mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Atorvastatin calcium trihydrate EP Impurity G

    CAS:

    Atorvastatin is a drug that belongs to the class of statins. It is used for the treatment of high cholesterol levels and other related diseases, such as cardiovascular disease. Atorvastatin calcium trihydrate EP Impurity G is an impurity that may be present in atorvastatin calcium trihydrate. This compound has not been found to have any pharmacological activity.

    Formula:C34H37FN2O5
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:572.67 g/mol

    Ref: 3D-IA182820

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • GS 441524 triphosphate

    CAS:

    Triphosphorylated form of an antiviral nucleoside analog with activity against zoonotic feline infectious peritonitis virus (FIPV) and severe acute respiratory syndrome (SARS) virus from Coronaviridae family. The compound is the biologically active form of the GS 441524 prodrug and being triphosphorylated, it competes with natural nucleoside triphosphates in cells and interferes with viral RNA synthesis.  Made to order.

    Formula:C12H12N5O13P3·4Na
    Purity:(31P-Nmr) Min. 95 Area-%
    Color and Shape:White Powder
    Molecular weight:531.20 g/mol

    Ref: 3D-FG167050

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product