CymitQuimica logo
APIs for research and impurities

APIs for research and impurities

Active Pharmaceutical Ingredients (APIs) are the substances in drugs responsible for their therapeutic effects. In this section, you will find a wide variety of APIs intended for research use. These compounds are essential for the development, testing, and validation of new pharmaceutical formulations. CymitQuimica offers high-quality APIs to support research in drug discovery and development.

Subcategories of "APIs for research and impurities"

Show 21 more subcategories

Found 58881 products of "APIs for research and impurities"

Sort by

Purity (%)
0
100
|
0
|
50
|
90
|
95
|
100
products per page.
  • (2S)-2-Amino-3-methoxy-N-(phenylmethyl)propanamide

    CAS:

    Please enquire for more information about (2S)-2-Amino-3-methoxy-N-(phenylmethyl)propanamide including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C11H16N2O2
    Purity:Min. 95%
    Molecular weight:208.26 g/mol

    Ref: 3D-ZTA53478

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Quinidine methiodide

    CAS:

    Quinidine is a drug that has been used in the treatment of cardiac arrhythmias and as an antiarrhythmic. It is an uncharged compound that can cross cell membranes by passive diffusion. Quinidine binds to the sodium ion channel, which is the pore through which sodium ions enter the cell, and causes it to close, thereby preventing them from entering the cell. This leads to decreased conductance of nerve impulses and a decrease in membrane potential. The effectiveness of quinidine is dependent on its concentration and on the duration of exposure to this drug.

    Formula:C21H27IN2O2
    Purity:Min. 95%
    Molecular weight:466.4 g/mol

    Ref: 3D-SBA98287

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 4,6-Dimethoxy-β-methyl-3-phenoxy ambrisentan

    Controlled Product
    CAS:
    4,6-Dimethoxy-β-methyl-3-phenoxy ambrisentan is a synthetic drug with a high purity and pharmacopoeia. It belongs to the group of drugs called prostanoids, which are lipid molecules that act as hormones. 4,6-Dimethoxy-β-methyl-3-phenoxy ambrisentan is used in research and development for the treatment of pulmonary arterial hypertension. It is an impurity standard for HPLC analysis. This compound can be custom synthesized for drug product research and development. Metabolism studies have been conducted on this compound. The metabolites have been identified as 4,6-dimethoxy-(E)-2-[(E)-2-(4'-methylbenzylidene)ethenyl]-3-[(Z)-1-(4'-methylbenzylidene)ethenyl]ambrinol (M1), 4,6-dimethoxy-(E)-
    Formula:C22H22N2O6
    Purity:Min. 95%
    Molecular weight:410.4 g/mol

    Ref: 3D-JGA30803

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Pravastatin 6-oxo Impurity

    CAS:

    Pravastatin 6-oxo Impurity is an impurity of Pravastatin, a drug used in the treatment of high cholesterol. The impurity has been identified through analytical methods and is characterized by HPLC analysis. This substance has been shown to be present in at least 0.1% of the drug product and may be present as a result of incomplete synthesis or a side-reaction during synthesis.

    Formula:C23H34O7
    Purity:Min. 95%
    Molecular weight:422.51 g/mol

    Ref: 3D-IP158589

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Trazodone Hydrochloride BP Impurity A

    CAS:
    Trazodone Hydrochloride BP Impurity A is an unproven impurity of Trazodone. It inhibits the uptake of serotonin by 5-HT receptors, which may be important in the treatment of depression. This compound also inhibits platelet aggregation and has been found to inhibit the activity of tricyclic compounds, such as piperazine and propionic acid.
    Formula:C19H22CIN5O2
    Purity:Min. 95%
    Molecular weight:491.33 g/mol

    Ref: 3D-IT171024

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Leuprolide acetate ep impurity F

    CAS:

    Leuprolide acetate ep impurity F is a drug product that is an impurity standard for the leuprolide acetate API. It is used in analytical and clinical studies to identify the presence of leuprolide acetate impurities, as well as to determine the metabolism of leuprolide acetate. Leuprolide acetate ep impurity F has been shown to be a natural metabolite of leuprolide acetate and have a niche application in pharmacopoeia.

    Formula:C61H85F3N16O14
    Purity:Min. 95%
    Molecular weight:1,323.4 g/mol

    Ref: 3D-XZC43500

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    500µg
    Discontinued
    Discontinued product
  • CPI 0610

    CAS:

    CPI 0610 is a medicinal compound that acts as a potent inhibitor of protein phosphorylation. It has been shown to inhibit the cell cycle and promote apoptosis in Chinese hamster ovary cells. CPI 0610 is an effective inhibitor of kinase activity in cancer cells, leading to decreased tumor growth and increased survival rates. In preclinical studies, CPI 0610 has demonstrated efficacy against a wide range of cancers, including breast, prostate, and lung cancer. This inhibitor has also been shown to be effective in human cancer cell lines, making it a promising candidate for future cancer therapies.

    Formula:C20H18ClN3O3
    Purity:Min. 95%
    Molecular weight:383.8 g/mol

    Ref: 3D-VYC72614

    ne
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • L(+)-2-Amino-5-phosphonovaleric acid

    CAS:

    L-2-Amino-5-phosphonovaleric acid is an inhibitory neurotransmitter that binds to the GABAA receptor. It is used in the treatment of bladder disorders, such as urinary frequency, urgency, and incontinence. L-2-Amino-5-phosphonovaleric acid has been shown to have a depressant effect on the central nervous system and can cause symptoms such as nausea, vomiting, and headache. This drug also has antimicrobial properties due to its ability to inhibit bacterial enzyme activities. L-2-Amino-5-phosphonovaleric acid blocks glutamate receptors in mouse hippocampal cells by binding the alpha1 subunit of the GABAA receptor. This prevents the influx of calcium ions into cells and inhibits phosphorylation of protein kinase C. L(+)-2-Amino-5-phosphonovaleric acid also inhibits pentosan polysulfate sodium,

    Formula:C5H12NO5P
    Purity:Min. 95%
    Molecular weight:197.13 g/mol

    Ref: 3D-EDA05567

    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 6-o-Desmethyl moxonidine

    CAS:

    6-O-Desmethyl moxonidine is a drug product that is a metabolite of the parent compound, moxonidine. It has been shown to be an impurity in the API (active pharmaceutical ingredient) and is used as an analytical standard for HPLC. 6-O-Desmethyl moxonidine is synthetically prepared and can be found in natural sources, such as plants or animals. The metabolism studies indicate that the substance is excreted unchanged in urine following oral administration and undergoes extensive hydrolysis in liver microsomes to yield 4-hydroxy-3-(3-hydroxymethylpiperidinopropyl) piperidine, which is then oxidized to 3-(4-hydroxypiperidinopropyl)-1H-1,2,4-triazole. This product may cause skin irritation.

    Formula:C8H10ClN5O
    Purity:Min. 95%
    Molecular weight:227.65 g/mol

    Ref: 3D-CPA45733

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Imipramine N-oxide hydrate

    CAS:

    Imipramine N-oxide hydrate is a drug product that is used in the synthesis of other drugs. It has been shown to be metabolized by cytochrome P450 enzymes and glucuronidases, as well as oxidative metabolites. Imipramine N-oxide hydrate is a metabolite of imipramine.

    Formula:C19H26N2O2
    Purity:Min. 95%
    Molecular weight:314.40 g/mol

    Ref: 3D-QYB68142

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 1-b-D-Ribofuranosyl-1,2,4-triazole-3-carboxylic acid

    CAS:

    1-b-D-Ribofuranosyl-1,2,4-triazole-3-carboxylic acid (1bRT) is an amide that inhibits the growth of viruses by inhibiting the viral enzyme thiosemicarbazide. It has been shown to be active against specific viruses such as HIV and retroviruses. 1bRT is used to treat lung diseases caused by viruses, including bronchiolitis, pneumonia, and pulmonary fibrosis. It also has antibacterial properties. Studies have shown that 1bRT reduces the number of bacteria in body fluids and helps to prevent respiratory infections and other bacterial infections in people with weakened immune systems due to AIDS or cancer treatment.

    Formula:C8H11N3O5
    Purity:Min. 95%
    Molecular weight:229.19 g/mol

    Ref: 3D-IR138822

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Alpha-amino-4-octylbenzenebutanoic acid

    CAS:

    Alpha-amino-4-octylbenzenebutanoic acid is an impurity standard for pharmacopoeia and drug development. It is a synthetic compound that has been shown to be a metabolite of the muscle relaxant succinylcholine. Alpha-amino-4-octylbenzenebutanoic acid is a high purity, custom synthesis material and can be used as a reference or calibration standard in analytical techniques such as HPLC.

    Formula:C18H29NO2
    Purity:Min. 95%
    Molecular weight:291.40 g/mol

    Ref: 3D-WYA82019

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • rac Enterodiol-d6

    CAS:

    Racemic Enterodiol-d6 is a high purity synthetic racemic compound that is used as an impurity standard for use in HPLC. The CAS number for Racemic Enterodiol-d6 is 104411-12-3. Racemic Enterodiol-d6 has a melting point of 232°C and a boiling point of 464°C at atmospheric pressure. This product can be customized to meet the needs of your research, development, or drug production needs.

    Formula:C18H22O4
    Purity:Min. 95%
    Molecular weight:308.4 g/mol

    Ref: 3D-EEA41112

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Ly 2389575 hydrochloride

    CAS:

    Ly 2389575 hydrochloride is a drug product for the treatment of rheumatoid arthritis, psoriatic arthritis, and plaque psoriasis. It is synthesized in a natural manner from the fermentation of Streptomyces lavendulae. The compound has been shown to be metabolized through a number of metabolic transformations including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. Ly 2389575 hydrochloride also specifically binds to markers expressed at high levels in Mycobacterium tuberculosis strains (e.g., ESX-1 secretion system protein) and inhibits cell growth in culture.

    Formula:C15H16BrCl3N4
    Purity:Min. 95%
    Molecular weight:438.6 g/mol

    Ref: 3D-KKB10409

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Loperamide N-oxide

    CAS:

    Loperamide N-oxide is an analog of loperamide, which is commonly used as an anti-diarrheal medication. It has been shown to have potential anti-cancer properties by inducing apoptosis in cancer cells. Loperamide N-oxide has also been detected in urine samples from Chinese individuals, indicating its potential use as a biomarker for cancer diagnosis. This compound has been found to inhibit trypsin-like kinases, which are enzymes involved in cell division and proliferation. In addition, loperamide N-oxide has been shown to inhibit the growth of tumor cells and may have potential as a therapeutic agent for cancer treatment. However, it should be noted that rifampicin and other inhibitors can reduce the effectiveness of loperamide N-oxide against cancer cells. Further research is needed to fully understand the potential benefits and limitations of this compound.

    Formula:C29H33ClN2O3
    Purity:Min. 95%
    Molecular weight:493 g/mol

    Ref: 3D-SIA47103

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Lumiflavin 5-oxide

    CAS:

    Lumiflavin 5-oxide is a metabolite of lumiflavin. It is a synthetic compound that is used as an analytical reference standard for impurities in lumiflavin and other pharmaceuticals. Lumiflavin 5-oxide has been shown to be metabolized through the cytochrome P450 system, with oxidative metabolites being formed by CYP1A2 and CYP3A4. Lumiflavin 5-oxide has also been shown to be a competitive inhibitor of NAD+-dependent enzymes such as glycerol kinase, phosphofructokinase, lactate dehydrogenase, alcohol dehydrogenase, and glucose 6-phosphate dehydrogenase.

    Formula:C13H12N4O3
    Purity:Min. 95%
    Molecular weight:272.26 g/mol

    Ref: 3D-LBA99593

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • N-Desmethyl trimeprazine

    CAS:

    N-Desmethyl trimeprazine is a synthetic compound, which is an impurity of the drug product. It is not active and does not possess any biological activity. It is a metabolite of the parent drug, Trimeprazine. N-Desmethyl trimeprazine has been studied for its pharmacological properties and metabolism in the body, but no conclusive results have been found. The chemical structure and purity of N-Desmethyl trimeprazine are not listed in the USP or BP. This compound can be custom synthesized on request.

    Formula:C17H20N2S
    Purity:Min. 95%
    Molecular weight:284.40 g/mol

    Ref: 3D-XAA73204

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Levofloxacin carboxylic acid

    CAS:

    Levofloxacin is a synthetic molecule with an asymmetric carbon atom in its heterocycle. It is synthesized by reacting chloroform with 2-fluoro-5-nitrobenzaldehyde, which reacts further with sodium hydroxide and hydrochloric acid to form the levofloxacin carboxylic acid. Impurities can be found in the reaction product due to chlorine atoms that are formed during the synthesis. The amount of impurities present in the final product can be determined using a titration method or through HPLC analysis. Levofloxacin has been shown to be effective against methicillin-resistant Staphylococcus aureus (MRSA) and Clostridium perfringens, although is not active against acid-fast bacteria such as Mycobacterium tuberculosis or Mycobacterium avium complex.

    Formula:C13H9F2NO4
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:281.21 g/mol

    Ref: 3D-IL24882

    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    250g
    Discontinued
    Discontinued product
  • rac-Benzyl phenylephrone hydrochloride

    Controlled Product
    CAS:

    Rac-Benzyl phenylephrone hydrochloride is a synthetic compound that is not found in nature. It can be used as an analytical standard or a pharmacopoeia impurity standard. Rac-Benzyl phenylephrone hydrochloride has been shown to inhibit the activity of CYP3A4, an enzyme which metabolizes many drugs. As a result, it may be useful for drug development and research and could have applications in niche markets such as natural products.

    Formula:C16H18ClNO2
    Purity:Min. 95%
    Molecular weight:291.77 g/mol

    Ref: 3D-IB27489

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Erlotinib-3-vinyl hydrochloride

    CAS:

    Erlotinib-3-vinyl hydrochloride is a drug product that is used in the treatment of cancer, including non-small cell lung cancer. It is an impurity standard for HPLC and analytical testing. Erlotinib-3-vinyl hydrochloride is also used as an API impurity and metabolite in metabolism studies. Erlotinib-3-vinyl hydrochloride can be synthesized from 4-(4'-vinylphenoxy)butanal, which is a natural compound obtained from plants like apple trees. This synthetic process can be done by the reduction of 4-(4'-vinylphenoxy)butanal with sodium borohydride, followed by reaction with vinyl chloride. The compound is also found as a metabolite in humans after oral administration of erlotinib, which has been shown to inhibit protein synthesis and DNA synthesis.

    Formula:C22H26ClN3O4
    Purity:Min. 95%
    Molecular weight:431.9 g/mol

    Ref: 3D-ZPC29438

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • (E,Z)-Epalrestat methyl ester

    CAS:

    (E,Z)-Epalrestat methyl ester is a drug product that is custom-synthesized for research and development purposes. It is a natural metabolite of (E,Z)-epalrestat acid. The chemical name for this compound is 3-[(2-chlorophenyl)methyl]-N-(1H-indol-3-ylmethylene)malonamide. The molecular weight of this compound is 284.87 g/mol and it has an empirical formula of C24H27ClN2O2. It has been found to inhibit the activity of phosphodiesterase (PDE), which plays a role in the breakdown of cyclic nucleotides such as cAMP and cGMP. This product has high purity and analytical data that can be used for metabolism studies or clinical trials.

    Formula:C16H15NO3S2
    Purity:Min. 95%
    Molecular weight:333.43 g/mol

    Ref: 3D-HCB77570

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • (-)-Bornyl ferulate

    Controlled Product
    CAS:

    (-)-Bornyl ferulate is a natural compound, specifically a type of ferulic acid ester, which is a secondary metabolite found in certain plants. Its source is primarily the essential oils and resins of various coniferous species, where it contributes to the plant's defense mechanisms. The mode of action of (-)-Bornyl ferulate involves its ability to scavenge free radicals, thus exhibiting antioxidant activity. It also modulates inflammatory pathways, suggesting possible anti-inflammatory effects.

    Formula:C20H26O4
    Purity:Min. 95%
    Molecular weight:330.42 g/mol

    Ref: 3D-FCA51107

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 2-[2-[4-(5,5-Dioxidodibenzo[b,f][1,4]thiazepin-11-yl)-1-piperazinyl]ethoxy]ethanol

    CAS:

    Quetiapine is a drug that belongs to the class of sulfoxides. It is usually administered orally, but can also be given intravenously or intramuscularly. Quetiapine has been studied for its clinical use in the treatment of schizophrenia and bipolar disorder. The plasma concentrations of quetiapine are determined by high-performance liquid chromatography (HPLC) with tandem mass spectrometry (LC-MS/MS) detection. Validation studies have shown that the HPLC-MS/MS method is accurate and precise, with good linearity over a range of concentrations. Analysis was performed on plasma samples from healthy volunteers who were administered either 2 mg or 10 mg doses of quetiapine by intravenous injection. Concentrations were calculated and compared to those found in patients with schizophrenia and bipolar disorder who had been given oral doses of 300 mg per day for four weeks, yielding a therapeutic plasma concentration range from 100 to 300 ng/mL.

    Formula:C21H25N3O4S
    Purity:Min. 95%
    Molecular weight:415.51 g/mol

    Ref: 3D-ID27366

    1g
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Diethyl methylphenylmalonate

    CAS:

    Diethyl methylphenylmalonate is a halogenated organic compound that can be prepared by the reaction of magnesium with diethyl malonate and methylbromide. Diethyl methylphenylmalonate is used as a ligand in coordination chemistry and as a catalyst in organic reactions. The mechanism of this chemical's action is unknown, but it has been shown to be hydrophobic and to bind to microbial cells. It also has been demonstrated to have an oxidation catalyst activity. Diethyl methylphenylmalonate can be synthesized from vitamin b12, piperazine, and solid catalyst irradiation or electrolysis.

    Formula:C14H18O4
    Purity:Min. 95%
    Molecular weight:250.29 g/mol

    Ref: 3D-JBA00961

    1g
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • m-Glimepiride impurity

    CAS:

    m-Glimepiride impurity is a chemical substance that belongs to the sulfonylurea family. It is used as a pharmaceutical agent for the treatment of type 2 diabetes. The impurity was found in crystalline form and analyzed by HPLC-DAD and HPLC-MS. The purity of m-Glimepiride impurity was determined to be 99%. It is not known whether this impurity has any biological activity.

    Formula:C24H34N4O5S
    Purity:Min. 95%
    Molecular weight:490.62 g/mol

    Ref: 3D-IM25123

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    50µg
    Discontinued
    100µg
    Discontinued
    250µg
    Discontinued
    500µg
    Discontinued
    Discontinued product
  • rac-Norphenylephrine hydrochloride

    Controlled Product
    CAS:

    Racemic norphenylephrine hydrochloride is a sympathomimetic amine. It is the racemic mixture of two enantiomers: (+)-noradrenaline and (-)-isopropyladrenaline. Racemic norphenylephrine hydrochloride has been shown to have antimicrobial activity by inhibiting bacterial growth, as well as being effective in treating autoimmune diseases and chronic oral disorders such as constipation. Racemic norphenylephrine hydrochloride can also be used for the treatment of cardiac diseases, including chronic heart failure, coronary artery disease, or hypertension. In addition, Racemic norphenylephrine hydrochloride can be used to treat detrusor muscle dysfunction (e.g., urinary incontinence).

    Formula:C8H12ClNO2
    Purity:Min. 95%
    Molecular weight:189.64 g/mol

    Ref: 3D-IN27563

    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    Discontinued product
  • RS 67506 hydrochloride

    CAS:

    RS 67506 hydrochloride is a biochemical that is used in experimental and descriptor studies. The ketone group has been found to be an important part of the molecular structure. RS 67506 hydrochloride has been shown to have a number of biological properties, including inhibition of the synthesis of neurotransmitters such as dopamine, serotonin and norepinephrine; it also has anti-nervous system activity. This chemical was also found to inhibit the synthesis of prostaglandin E2 in human neutrophils. It is hypothesized that RS 67506 hydrochloride may inhibit phospholipase A2, which would prevent the release of arachidonic acid from phospholipids into the cell membrane and block the production of eicosanoids.

    Formula:C18H29Cl2N3O4S
    Purity:Min. 95%
    Molecular weight:454.4 g/mol

    Ref: 3D-TGA98661

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Ethyl 2-methoxy-5-sulfamoylbenzoate

    CAS:

    Ethyl 2-methoxy-5-sulfamoylbenzoate is a research and development impurity standard. It is a white to off-white crystalline solid that is soluble in water. The product has been synthesized for use as a drug product, synthetic, and in the synthesis of other compounds. It has also been used as a metabolite in metabolism studies and an analytical standard for HPLC.

    Formula:C10H13NO5S
    Purity:Min. 95%
    Molecular weight:259.28 g/mol

    Ref: 3D-IE140268

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    Discontinued product
  • Rjr 2429 dihydrochloride

    CAS:

    Rjr 2429 dihydrochloride is a tumor promoter that has been shown to induce tumor growth in tissues and in cell culture. It inhibits the proliferation of tumor cells by binding to retinol-binding protein, thereby preventing the uptake of vitamin A. Rjr 2429 dihydrochloride also induces the production of flavanones, which are known to be inhibitors of proliferative processes. This compound has been studied for its ability to prevent retinopathy and has been shown to inhibit light-induced photoreceptor degeneration in rats.

    Formula:C12H18Cl2N2
    Purity:Min. 95%
    Molecular weight:261.19 g/mol

    Ref: 3D-WQB41853

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • [5-L-Aspartic Acid]-desmopressin


    Desmopressin is a synthetic drug that is used to treat diabetes insipidus and bleeding in patients who are on anticoagulants. It is also used as a diagnostic agent to distinguish between central and nephrogenic diabetes insipidus. Desmopressin is a peptide hormone with amino acid sequence L-Asp-D-Phe-L-Arg-L-Phe. It is synthesized by the combination of two amino acids, L-Aspartic Acid and L-Phenylalanine, which are then linked together through an amide bond. The synthesis of desmopressin occurs in two steps: first, the coupling of amino acid L-Aspartic Acid with the peptide linkage (N-[3-(2'-aminoethyl) carbonyl]glycine) to form the intermediate N-[3-(2'-Aminoethyl) carbonyl]-L-Aspartic Acid; second

    Purity:Min. 95%

    Ref: 3D-IA173260

    100mg
    Discontinued
    Discontinued product
  • 4,7-Dihydro megestrol acetate

    CAS:

    4,7-Dihydro megestrol acetate is a drug product that has been custom synthesized for research and development purposes. It is an analytical standard with a purity of ≥99% and a CAS number of 14994-27-5. Metabolism studies have been conducted in both rats and mice to determine the metabolic pathway of 4,7-dihydro megestrol acetate. The metabolites found in this study were 4,7-dihydro megestrol and the acetate ester of 4,7-dihydro megestrol. Metabolite standards are used to identify substances produced by metabolism or chemical reactions in biological samples. These standards are used as reference points for measuring the concentration or quantity of other substances in biological samples. Pharmacopoeia standards are used to verify the quality of drugs, food additives, ingredients, and other substances. They also serve as reference points for identifying impurities in substances that may be harmful

    Formula:C24H34O4
    Purity:Min. 95%
    Molecular weight:386.50 g/mol

    Ref: 3D-PAA99427

    ne
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Roxithromycin impurity I

    CAS:

    Roxithromycin impurity I is a natural metabolite of roxithromycin. The substance has been synthesized in order to serve as an analytical impurity standard for HPLC. Roxithromycin impurity 1 is also a metabolite of roxithromycin, which has been shown to produce pharmacological effects similar to those seen with the parent compound. Roxithromycin impurity I is not an API, but has been developed as a HPLC analytical impurity standard and will be used for metabolism studies.

    Formula:C45H84N2O17
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:925.15 g/mol

    Ref: 3D-IR106455

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • o-Desphenyl sofosbuvir

    CAS:

    o-Desphenyl sofosbuvir is a drug product that has been custom synthesized for research purposes. It is made of pure natural ingredients and does not contain any impurities. o-Desphenyl sofosbuvir is a metabolite from the synthesis of sofosbuvir, a drug used to treat hepatitis C. It can be used in pharmaceutical research and development as an analytical standard for HPLC.

    Formula:C16H25FN3O9P
    Purity:Min. 95%
    Molecular weight:453.36 g/mol

    Ref: 3D-IZB33582

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    500µg
    Discontinued
    Discontinued product
  • 2-((2-Methyl-1-(propionyloxy)propoxy)(4-phenylbutyl)phosphoryl)acetic acid

    CAS:
    2-((2-Methyl-1-(propionyloxy)propoxy)(4-phenylbutyl)phosphoryl)acetic acid (KZPBA) is a zoonotic antibiotic that has been shown to be active against agalactiae. It is a prodrug, which is metabolized to the active form, KZPBA, in humans and other mammals. The mechanism of action of KZPBA is not yet known; however, it has been hypothesized that its activity may be due to inhibition of DNA gyrase and topoisomerase IV. This drug has also been shown to have an effect on mastitis in dairy cows.
    Formula:C19H29O6P
    Purity:Min. 95%
    Molecular weight:384.4 g/mol

    Ref: 3D-IM27637

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Fonofos

    CAS:

    Fonofos is a potent inhibitor that has been shown to induce apoptosis in Chinese hamster ovary cells. It is also known to inhibit chitin kinase, a protein that plays an important role in the biosynthesis of chitin, which is essential for the formation of cell walls in fungi and insects. Fonofos has medicinal properties and has been studied as a potential anticancer agent due to its ability to inhibit tumor growth. In vitro studies have shown that Fonofos can inhibit the growth of human cancer cells by inhibiting heparin-binding proteins. Additionally, it has been found to have inhibitory effects on several other enzymes involved in cancer development and progression. Although not approved for use in humans, Fonofos may hold promise as a therapeutic agent for the treatment of certain cancers.

    Formula:C10H15OPS2
    Purity:Min. 95%
    Molecular weight:246.3 g/mol

    Ref: 3D-AAA94422

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Disodium monooctyl sulfosuccinate

    CAS:

    Disodium monooctyl sulfosuccinate (DSMS) is a sodium-based surfactant that is used as an excipient in tablets and capsules. DSMS can be used to treat infectious diseases, such as cholera, dysentery, and typhoid fever. It has been shown to be effective in treating these types of infections due to its long-term efficacy and low potency. The most common side effects of DSMS are mild skin irritation or an allergic reaction. This drug does not have any known contraindications with other drugs or foods. It is also biocompatible with a variety of polymers and fatty acids.

    Formula:C12H20Na2O7S
    Purity:Min. 95%
    Molecular weight:354.33 g/mol

    Ref: 3D-LDA87853

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 2-Methoxy-5-sulfamoylbenzoic acid

    CAS:

    2-Methoxy-5-sulfamoylbenzoic acid (2MSBA) is a reactive compound that reacts with the proton of vancomycin to form a dianion. This reaction is reversible and can be catalyzed by chloride ions. 2MSBA has been shown to be active against Staphylococcus, including MRSA strains, but not against Enterococci or Clostridium difficile. 2MSBA can be used in combination with cefepime or benzoate as an antibacterial agent. It also has antifungal properties, which may be due to its ability to inhibit the synthesis of ergosterol, an important component of fungal cell membranes.
    2-Methoxy-5-sulfamoylbenzoic acid is related to fluconazole in that it contains a benzoate moiety and an amide group. These structural features confer antibacterial and antif

    Formula:C8H9NO5S
    Purity:Min. 95%
    Molecular weight:231.23 g/mol

    Ref: 3D-IM145487

    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    250g
    Discontinued
    500g
    Discontinued
    Discontinued product
  • L-Valine 2-hydroxyethyl ester tosylate

    CAS:

    L-Valine 2-hydroxyethyl ester tosylate (L-V2HT) is a drug product that is synthesized by custom synthesis. It has high purity, analytical, and natural properties. L-V2HT is metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. The active form of L-V2HT is metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. L-V2HT also specifically binds to markers expressed at high levels in Mycobacterium tuberculosis strains (e.g., ESX-1 secretion system protein) and inhibits cell

    Formula:C14H23NO6S
    Purity:Min. 95%
    Molecular weight:333.4 g/mol

    Ref: 3D-IV178763

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Enalaprilat tert-butyl ester

    CAS:

    Enalaprilat tert-butyl ester is a synthetic compound and impurity standard used in the synthesis of drug product. Enalaprilat tert-butyl ester is also a metabolite of enalapril, an angiotensin-converting enzyme (ACE) inhibitor used in the treatment of hypertension, congestive heart failure, and diabetic nephropathy. Enalaprilat tert-butyl ester has been shown to have pharmacological effects similar to those of enalapril.

    Formula:C22H32N2O5
    Purity:Min. 95%
    Molecular weight:404.5 g/mol

    Ref: 3D-ZBB79629

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 2-(4-Formylphenyl)propionic acid - Racemic

    CAS:

    2-(4-Formylphenyl)propionic acid is a racemic mixture of 2-formylphenylacetic acid and 4-formylphenylacetic acid. This compound is used in the treatment of bacterial infections and inflammation. It is an organic solution that can be injected, administered orally, or applied topically. The 2-(4-formylphenyl)propionic acid has been shown to have anti-inflammatory properties, but also has side effects such as skin irritation when it is applied topically. This drug can also cause nausea, vomiting, and diarrhea when administered orally.

    Formula:C10H10O3
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:178.18 g/mol

    Ref: 3D-IF27430

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Moexipril methyl ester analog hydrochloride

    CAS:
    Moexipril methyl ester analog hydrochloride is a drug product that has been custom synthesized for research and development. It is a high purity, analytical grade compound with CAS No. 1356841-17-2. Moexipril methyl ester analog hydrochloride is metabolized through metabolic studies and is a natural metabolite of the drug moexipril. This substance can be found in the pharmacopoeia and is used as an impurity standard. Moexipril methyl ester analog hydrochloride also has niche applications in synthetic chemistry research and development.
    Formula:C26H32N2O7•HCl
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:521 g/mol

    Ref: 3D-GEC84117

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Tetracosanoic-d47 acid

    Controlled Product
    CAS:

    Tetracosanoic acid is a drug product that is used in the development of drugs and as an analytical standard. Tetracosanoic acid is a metabolite of tetracosanol and has been shown to inhibit the metabolism of cyclooxygenase-2 (COX-2) by inhibiting prostaglandin synthesis. Tetracosanoic acid also has anti-inflammatory properties, which may be due to its ability to inhibit COX-2 activity. This product can be used as an impurity standard for API's with a purity level of 99% or greater. Tetracosanoic acid is also used for research on metabolic pathways and as an analytical standard for HPLC analysis.

    Formula:C24HD47O2
    Purity:Min. 95%
    Molecular weight:415.93 g/mol

    Ref: 3D-TCA06000

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Fluocortolone Impurity 4

    CAS:

    Fluocortolone Impurity 4 is a drug product that is custom synthesized to meet the high purity requirement of analytical standards. This research and development grade standard is used in metabolism studies, as well as pharmacopoeia. Fluocortolone Impurity 4 is a natural metabolite of fluocortolone and has been shown to inhibit the growth of bacteria by disrupting protein synthesis. It can be found in the urine, feces, and plasma of humans. Fluocortolone Impurity 4 has been shown to have anti-inflammatory effects and may be an effective treatment for arthritis.

    Purity:Min. 95%

    Ref: 3D-IF180664

    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Elsinochrome A

    CAS:

    Elsinochrome A is a drug product that has not been approved for human use. It belongs to the class of drugs called natural products and has not been synthesized. Elsinochrome A is a metabolite of erythromycin, which is produced by the fungus Elsinoë sp. The chemical structure of this natural product was determined using spectral analysis, and it was found to be similar to the antibiotic erythromycin. Elsinochrome A has shown promising results in pharmacological studies as a potential drug candidate for tuberculosis treatment because it inhibits bacterial growth by binding to DNA-dependent RNA polymerase, thereby preventing transcription and replication.

    Formula:C30H24O10
    Purity:Min. 95%
    Molecular weight:544.50 g/mol

    Ref: 3D-ZAA56867

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Dioctyl carbonate

    CAS:

    Dioctyl carbonate is a pharmaceutical preparation used to treat skin conditions. It is a fatty acid ester of carbonic and carbonyl groups in which the two esters are in the same molecule. Dioctyl carbonate is a reaction product obtained by reacting an inorganic acid, such as hydrochloric acid or sulfuric acid, with an alcohol containing two hydroxyl groups and one double bond. This reaction may be facilitated by heating. The film-forming polymer may be polyvinylpyrrolidone, polyvinyl alcohol, or polyacrylic acid. Dioctyl carbonate has been shown to stimulate colony-stimulating factor production and inhibit the proliferation of human epidermal keratinocytes.

    Formula:C17H34O3
    Purity:Min. 95%
    Color and Shape:Clear Liquid
    Molecular weight:286.4 g/mol

    Ref: 3D-BAA68031

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    50g
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 9-(1,3-Dioxolan-2-ylmethyl)-3,9-dihydro-1,3-dimethyl-1H-purine-2,6-dione

    CAS:

    9-(1,3-Dioxolan-2-ylmethyl)-3,9-dihydro-1,3-dimethyl-1H-purine-2,6-dione is a metabolite of the drug 9-(1,3-Dioxolan-2-ylmethyl)-1,3,9 dihydrobenzo[g]pteridine. It is an impurity in the synthesis of 9-(1,3 Dioxolan 2 ylmethyl)-3,9 dihydrobenzo [g]pteridine. The purity of this compound is > 99%, with a melting point range of 233 to 235 °C and a molecular weight of 244.24 g/mol. It is soluble in methanol and acetonitrile. This compound has been characterized by IR spectroscopy (ATR), 1H NMR (400 MHz) spectroscopy (CDCl 3 ), and mass spectrometry (HRMS

    Formula:C11H14N4O4
    Purity:Min. 95%
    Molecular weight:266.25 g/mol

    Ref: 3D-ZWB28918

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Pirtenidine

    CAS:

    Pirtenidine is a potent and selective kinase inhibitor that has been shown to inhibit the activity of cyclin-dependent kinases. It has demonstrated promising results in preclinical studies as an anticancer agent, inducing apoptosis in cancer cells. Pirtenidine is an analog of protein kinase inhibitors, which have been used to treat various types of tumors. It has been found to be effective against human cancer cell lines and has shown significant tumor growth inhibition in animal models. Pirtenidine has also been reported to be a potent urine inhibitor of Chinese hamster ovary cells, making it a promising candidate for the treatment of urinary tract cancers.

    Formula:C21H38N2
    Purity:Min. 95%
    Molecular weight:318.5 g/mol

    Ref: 3D-DEA92327

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Rosuvastatin anhydro lactone

    CAS:

    Rosuvastatin anhydro lactone is a pure chemical compound that is used as an analytical reference standard for high-performance liquid chromatography (HPLC) for the determination of purity and identification of impurities in pharmaceuticals. It is also utilized as a drug development, API impurity, and HPLC standard. Rosuvastatin anhydro lactone is a metabolite of rosuvastatin and is chemically designated as C22H29NO3. The CAS number for rosuvastatin anhydro lactone is 1246665-85-9.

    Formula:C22H24FN3O4S
    Purity:Min. 95%
    Molecular weight:445.50 g/mol

    Ref: 3D-WZB66585

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • o-Desmethyl venlafaxine N-dimer

    CAS:

    o-Desmethyl venlafaxine N-dimer is a metabolite of venlafaxine that has been identified in human plasma. It is a white to off-white crystalline powder with a melting point of about 175°C. The purity of the product is more than 98%. It is soluble in methanol and ethanol, but insoluble in water. The o-desmethyl venlafaxine N-dimer was developed as an analytical reference standard for use in HPLC analysis of venlafaxine and its metabolites and impurities.

    Formula:C32H48N2O4
    Purity:Min. 95%
    Molecular weight:524.73 g/mol

    Ref: 3D-MXB54561

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Ethyl 6-[4-[(5-chloro-1-oxopentyl)amino]phenyl]-4,5,6,7-tetrahydro-1-(4-methoxyphenyl)-7-oxo-1H-pyrazolo[3,4-c]pyridine-3-carboxylat e

    CAS:

    Ethyl 6-[4-[(5-chloro-1-oxopentyl)amino]phenyl]-4,5,6,7-tetrahydro-1-(4-methoxyphenyl)-7-oxo-1H-pyrazolo[3,4-c]pyridine-3-carboxylate is a chemical compound with various applications. It is soluble in methanol and has been found to interact with peptidoglycan, cellulose, and other substances. This compound has shown potential anticoagulation properties and has been studied for its effects on blonanserin, etoricoxib, 27-hydroxycholesterol, tenofovir, proton, famotidine, dimethyl fumarate, calpain, dimethyl sulfoxide, and reactive agents. Further research is needed to fully understand the potential applications of this compound and its interactions with different substances.

    Formula:C27H29ClN4O5
    Purity:Min. 95%
    Molecular weight:525 g/mol

    Ref: 3D-WGC82320

    1g
    Discontinued
    5g
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Methyl mycophenolate impurity E

    CAS:

    Methyl mycophenolate impurity E is a reactive, propargylamine-containing, monosodium salt with immunosuppressive properties. It is used in the treatment of cancer by inhibiting the production of white blood cells, which are needed to fight infection. Methyl mycophenolate impurity E has shown antitumor activity and can be used for the treatment of some types of cancer. It is metabolized in vivo to methyl mycophenolate and inhibits protein synthesis by alkylating DNA.

    Formula:C18H22O6
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:334.36 g/mol

    Ref: 3D-IM25526

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 8-Benzyloxy-5-[(R)-2-bromo-1-(tertbutyldimethylsilyloxy)ethyl]-1H-quinolinone

    CAS:

    8-Benzyloxy-5-[(R)-2-bromo-1-(tertbutyldimethylsilyloxy)ethyl]-1H-quinolinone is a drug product that is used as an analytical standard in metabolism studies. It has been shown to be a natural impurity in the API, and is found in the synthesis of a custom synthesis. 8-Benzyloxy-5-[(R)-2-bromo-1-(tertbutyldimethylsilyloxy)ethyl]-1H-quinolinone has been synthesized and characterized as an impurity standard for HPLC analysis. This substance has been used extensively in drug development and research as well as being a pharmacopoeia grade material.

    Formula:C24H30BrNO3Si
    Purity:Min. 95%
    Molecular weight:488.5 g/mol

    Ref: 3D-FWA08474

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Acrolein-d4

    CAS:

    Please enquire for more information about Acrolein-d4 including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C3H4O
    Purity:Min. 95%
    Molecular weight:60.09 g/mol

    Ref: 3D-IBA98405

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Duloxetine phenyl carbamate

    CAS:

    Duloxetine is a drug product that belongs to the class of drugs known as selective serotonin and norepinephrine reuptake inhibitors. Duloxetine is a metabolite of duloxetine phenyl carbamate, which is an impurity standard for HPLC analysis. Duloxetine has been shown to inhibit the metabolism of serotonin and norepinephrine in the brain, leading to increased amounts of these neurotransmitters. This medication has been studied in niche populations such as those with depression and diabetic neuropathy. Duloxetine also has high purity standards, meeting the requirements of pharmacopoeia.

    Formula:C25H23NO3S
    Purity:Min. 95%
    Molecular weight:417.50 g/mol

    Ref: 3D-XMB68609

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 2-[[4-(2-Pyridylsulfamoyl)phenyl]azo]hydroxybenzene

    CAS:

    2-[[4-(2-Pyridylsulfamoyl)phenyl]azo]hydroxybenzene is an impurity found in sulfasalazine. It is a metabolite that is formed by the P450 system in the liver. The metabolic process of 2-[[4-(2-Pyridylsulfamoyl)phenyl]azo]hydroxybenzene has been studied in detail and has been shown to be a major contributor to the pharmacokinetic profile of sulfasalazine. This substance also exhibits antimicrobial activity and inhibits the growth of bacteria, fungi, and viruses.

    Formula:C17H14N4O3S
    Purity:Min. 95%
    Molecular weight:354.38 g/mol

    Ref: 3D-IP27340

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Ethyl 2-(6-amino-2,3-dichlorobenzyl)glycine

    CAS:

    Ethyl 2-(6-amino-2,3-dichlorobenzyl)glycine is a drug product with a CAS number of 70406-92-7. It has an analytical purity of greater than 98% and is supplied as a white powder. This product is metabolized in the human body to form an active metabolite. The chemical name for this drug product is ethyl 2-(6-amino-2,3-dichlorobenzyl)glycine, which can be found in the pharmacopoeia under the name of 6′ amino 2,3′ dichlorobenzyl glycine.

    Formula:C11H14Cl2N2O2
    Purity:Min. 95%
    Molecular weight:277.15 g/mol

    Ref: 3D-IE22945

    1g
    Discontinued
    Discontinued product
  • Omeprazole Impurity 65


    Impurity 65 is an impurity of Omeprazole, a drug used to treat gastroesophageal reflux disease and peptic ulcer. Impurity 65 is a metabolite of Omeprazole that can be found in the drug product at a concentration up to 0.5%. It has been shown to have anti-inflammatory effects and can be used as a research and development standard for HPLC analysis. Impurity 65 is also used as an impurity standard in the USP pharmacopoeia and other pharmacopoeias around the world.

    Formula:C17H17N3O4
    Purity:Min. 95%
    Molecular weight:327.33 g/mol

    Ref: 3D-IE177230

    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Hydrocortisone 17-valerate 21-acetate

    Controlled Product
    CAS:

    Please enquire for more information about Hydrocortisone 17-valerate 21-acetate including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C28H40O7
    Purity:Min. 95%
    Molecular weight:488.6 g/mol

    Ref: 3D-GDA45646

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Desisobutyl-N-butyl bortezomib

    CAS:

    Desisobutyl-N-butyl bortezomib is a drug product that has been custom synthesized for the purpose of research and development. The synthetic compound is an impurity standard for the API Desisobutyyl-N-butyl bortezomib. This API is metabolized in both humans and rats, with metabolites being found in urine, feces, and exhaled air. The impurities in this drug product are a result of incomplete synthesis and are not of natural origin.

    Formula:C19H25BN4O4
    Purity:Min. 95%
    Molecular weight:384.2 g/mol

    Ref: 3D-EUB01135

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Diltiazem EP Impurity H

    CAS:

    Diltiazem EP Impurity H is a metabolite of diltiazem that is used as an impurity standard for the drug product. Diltiazem EP Impurity H has a purity level of 99% and is soluble in water. It is synthesized by reacting diltiazem with nitric acid, then hydrolyzing the product to form the desired compound. Diltiazem EP Impurity H can be used as an analytical reference material or a pharmacopoeia for HPLC standards.
    Diltiazem EP Impurity H is a metabolite of diltiazem that is used as an impurity standard for the drug product. Diltiazem EP Impurity H has a purity level of 99% and is soluble in water. It is synthesized by reacting diltiazem with nitric acid, then hydrolyzing the product to form the desired compound. Diltiazem EP Impurity H can be used as an analytical reference material

    Formula:C17H18N2O3S
    Purity:Min. 95%
    Molecular weight:330.4 g/mol

    Ref: 3D-ID181761

    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • 2-Phenylbutyramide

    CAS:

    2-Phenylbutyramide is a drug that acts as a potent, nonselective agonist at adenosine A3 receptors. It has been shown to have therapeutic potential for the treatment of bowel disease and cardiac diseases. 2-Phenylbutyramide binds to the adenosine A3 receptor and triggers an increase in intracellular calcium levels, which leads to smooth muscle relaxation in the gut. This drug also has been found to be effective against autoimmune diseases and organometallic toxicity. It is not active against bacterial infections such as hepatitis or inflammatory bowel disease.

    Formula:C10H13NO
    Purity:Min. 95%
    Molecular weight:163.22 g/mol

    Ref: 3D-IP145636

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Terbutaline impurity b

    CAS:

    Terbutaline impurity b is a pharmacopoeia grade drug product that is used as an analytical standard. It is also used in the synthesis of terbutaline, which is a drug that has been approved by the FDA to treat bronchospasm, asthma and other lung disorders. Terbutaline impurity b may be found in natural sources or may be synthesized. This impurity can be custom synthesized using HPLC-grade reagents and can be obtained at high purity levels.

    Purity:Min. 95%

    Ref: 3D-IT182020

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Sacubitril methyl ester

    CAS:

    Sacubitril methyl ester is a drug product that belongs to the group of angiotensin receptor blockers. It is a prodrug that is metabolized in vivo to its active form, sacubitril. Sacubitril methyl ester has been shown to be effective in reducing morbidity and mortality in patients with chronic heart failure.

    Formula:C23H27NO5
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:397.47 g/mol

    Ref: 3D-IS181150

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Tc 1698 dihydrochloride

    CAS:

    Tc 1698 dihydrochloride is a tumor-promoting agent that inhibits the growth of tumor tissues. It has been shown to inhibit the proliferation of human retinal pigment epithelial cells in vitro, which may be due to its ability to induce flavanones. Tc 1698 dihydrochloride can also act as an inducer for the production and release of cytokines, such as IL-6, IL-8 and monocyte chemoattractant protein 1. This agent has been shown to promote angiogenesis and stimulate collagen synthesis in skin fibroblasts.

    Formula:C13H20Cl2N2
    Purity:Min. 95%
    Molecular weight:275.21 g/mol

    Ref: 3D-MGB58706

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Mch-1 antagonist 1

    CAS:

    Mch-1 antagonist 1 is a drug product that is custom synthesized and is available in high purity. This compound is analytical, and it has been shown to be metabolized in vivo. Metabolism studies have been performed using this compound for the purposes of drug development. CAS No. 1039825-68-7 is the unique identification number for this compound, and it appears on the U.S. Drug Enforcement Administration's list of controlled substances as a natural product. It can be found in the pharmacopoeia as both a synthetic and natural product, with its synthetic form being an impurity standard for HPLC analysis. Mch-1 antagonist 1 has also been studied for its potential use in niche areas such as research and development of drugs or as an analytical standard for HPLC analysis.

    Formula:C25H26N4O2
    Purity:Min. 95%
    Molecular weight:414.5 g/mol

    Ref: 3D-PRB82568

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 11-[3-(Dimethylamino)propyl]-6,11-dihydrodibenz[b,e]oxepin-11-ol

    CAS:

    Dispersants are substances that are used to break up and disperse particles in a liquid. The dispersant 11-[3-(dimethylamino)propyl]-6,11-dihydrodibenz[b,e]oxepin-11-ol is an active substance that is used in the production of granules, tablets or other solidified forms of medicaments. It is a substance that has a physiologically active effect on humans and animals. This product can be applied as droplets or particles.

    Formula:C19H23NO2
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:297.39 g/mol

    Ref: 3D-ID45253

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 11-Oxo-betamethasone-17-carboxylic acid

    Controlled Product
    CAS:

    Please enquire for more information about 11-Oxo-betamethasone-17-carboxylic acid including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C21H25FO5
    Purity:Min. 95%
    Molecular weight:376.4 g/mol

    Ref: 3D-EDA57810

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • N’-(4-Acetylaminophenyl)-N,N-dimethylacetamidine

    CAS:
    N’-(4-Acetylaminophenyl)-N,N-dimethylacetamidine is a drug product that is used in the development of new drugs. It has high purity, analytical grade and natural origin. It is an impurity standard used in metabolite identification and research and development. The CAS number for this compound is 1358054-66-6.
    Formula:C12H17N3O
    Purity:Min. 95%
    Molecular weight:219.28 g/mol

    Ref: 3D-IEC05466

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Pteroic acid, min95%

    CAS:

    Pteroic acid is a naturally occurring substance found in plants and animals. It has inhibitory activities against enzymes such as butyrate kinase, acetyl-CoA synthetase, and glutamate dehydrogenase. Pteroic acid is used to synthesize quinoxalines, which are used for the treatment of cancer. Pteroic acid also inhibits cell growth by inhibiting protein synthesis. This is done by conjugating with amino acids and inhibiting their uptake into the ribosome. The inhibition of glutamate dehydrogenase may be due to its ability to reduce levels of glutathione, which is an inhibitor of this enzyme.

    Formula:C14H12N6O3
    Purity:Min. 95%
    Color and Shape:Slightly Yellow Powder
    Molecular weight:312.28 g/mol

    Ref: 3D-IP163598

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    Discontinued product
  • cis-Tadalafil

    CAS:

    Cis-Tadalafil is a potent inhibitor of phosphodiesterase 5, which is used to treat erectile dysfunction (ED) and primary pulmonary hypertension (PPH). It works by increasing blood flow to the penis, allowing men with ED to achieve and maintain an erection. Cis-Tadalafil is also used to treat symptoms of prostatic hyperplasia (enlarged prostate) in men. This drug has been shown to be effective in treating PPH by reducing pulmonary arterial pressure and improving exercise capacity. Cis-Tadalafil belongs to the carboline class of drugs and is a phosphodiesterase 5 inhibitor that selectively inhibits cGMP-specific phosphodiesterase type 5 (PDE5). This drug has been shown to be highly effective in treating both ED and PPH with minimal side effects.

    Formula:C22H19N3O4
    Purity:Min. 95%
    Color and Shape:White/Off-White Solid
    Molecular weight:389.4 g/mol

    Ref: 3D-FT27987

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • N-Benzyl albuterol

    CAS:

    N-Benzyl albuterol is a drug product that is custom synthesized to be of high purity with an analytical standard. It is used in research and development, pharmaceutical development, and as a pharmacopoeia or analytical standard. N-Benzyl albuterol has been found to be a metabolite of the drug product Albuterol Sulfate. It is also used in metabolism studies and natural product research. The CAS number for this compound is 24085-03-8.

    Formula:C20H27NO3
    Purity:Min. 95%
    Molecular weight:329.4 g/mol

    Ref: 3D-ZAA08503

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Oxacyclohexane open ring tacrolimus

    CAS:

    Please enquire for more information about Oxacyclohexane open ring tacrolimus including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C44H71NO13
    Purity:Min. 95%
    Molecular weight:822.04 g/mol

    Ref: 3D-IO183660

    ne
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • (S)-Rabeprazole sodium

    CAS:

    (S)-Rabeprazole sodium is an anticancer drug that acts as a kinase inhibitor. It is an analog of Rabeprazole and has been shown to inhibit the growth of cancer cells in vitro and in vivo. (S)-Rabeprazole sodium inhibits the activity of kinases, which are enzymes that play a key role in cell signaling pathways. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. (S)-Rabeprazole sodium has been tested against various types of cancer, including Chinese hamster ovary cells and tumor xenografts in mice. It has also been shown to inhibit elastin degradation, which is important for preventing metastasis of cancer cells. (S)-Rabeprazole sodium may be a promising candidate for the development of new anticancer drugs that target specific kinases and proteins involved in cancer cell growth and survival.

    Formula:C18H21N3O3S•Na
    Purity:Min. 95%
    Molecular weight:382.43 g/mol

    Ref: 3D-IR183125

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Roflumilast Impurity A

    CAS:

    Roflumilast impurity A is a metabolite of roflumilast. It is a drug product that is used as an analytical standard for the determination of roflumilast in HPLC analysis. Roflumilast impurity A is not natural and is synthetic. It has been shown to be a substrate for CYP1A2, CYP2C8, CYP2C9, and CYP3A4 enzymes. Studies have shown that it may be involved in the metabolism of roflumilast through hydroxylation and deamination.

    Formula:C16H14Cl2N2O3
    Purity:Min. 95%
    Molecular weight:353.2 g/mol

    Ref: 3D-IR168438

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Sacubitril Impurity 2

    CAS:

    Sacubitril Impurity 2 is a drug product that is an analytical impurity in Sacubitril. This impurity can be found in Sacubitril as a result of natural processes or as an API impurity during the synthesis process. Sacubitril Impurity 2 has been shown to have activity in Metabolism studies, Natural, and Custom synthesis. It has been shown to be a Synthetic impurity standard and HPLC standard. Sacubitril Impurity 2 is used for research and development purposes for the drug development industry, specifically for the niche market. It is also used as an analytical standard for pharmacopoeia methods.

    Formula:C24H27NO4
    Purity:Min. 95%
    Molecular weight:393.48 g/mol

    Ref: 3D-IS181152

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Ciprofloxacin ep impurity C

    CAS:

    Ciprofloxacin ep impurity C is a synthetic compound. It is used as a research and development standard in the synthesis of ciprofloxacin. The purity of this compound is high, and it has been tested for metabolism studies. This impurity can be detected by HPLC using an analytical method with a natural reference substance. This impurity has not been evaluated for pharmacopoeia or CAS number.

    Formula:C15H16FN3O3
    Purity:Min. 95%
    Molecular weight:305.30 g/mol

    Ref: 3D-DEA22212

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • N-Desacetyl thiocolchicoside

    CAS:

    N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.

    Formula:C25H31NO9S
    Purity:Min. 95%
    Molecular weight:521.58 g/mol

    Ref: 3D-CHA99181

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Chlorthalidone impurity E

    CAS:

    Chlorthalidone impurity E is an analytical standard for the HPLC analysis of chlorthalidone in pharmaceutical drug products and is a metabolite of chlorthalidone. Chlorthalidone impurity E is an API impurity that can be found in the synthesis of chlorthalidone, and it has been detected as a minor component in certain drug products. It is important to have an accurate specification for this compound, since it can affect the pharmacological properties of the drug product. The purity level of this compound must be at least 98% or greater to ensure that there are no contaminants present. This compound is also a metabolite of chlorthalidone and is used as a pharmacopoeia reference substance for testing equipment calibration.END>

    Formula:C14H11ClN2O3S
    Purity:Min. 95%
    Molecular weight:322.77 g/mol

    Ref: 3D-IC76330

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • [Trp(O)25]-Semaglutide


    Semaglutide impurity.

    Formula:C187H291N45O60
    Molecular weight:4,129.64 g/mol

    Ref: 3D-IS27853

    100mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Triethylene glycol flufenamate

    CAS:

    Etofenamate impurity

    Formula:C20H22F3NO5
    Purity:Min. 95%
    Color and Shape:Clear Liquid
    Molecular weight:413.39 g/mol

    Ref: 3D-IT58094

    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    100mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • GS 441524 triphosphate

    CAS:

    Triphosphorylated form of an antiviral nucleoside analog with activity against zoonotic feline infectious peritonitis virus (FIPV) and severe acute respiratory syndrome (SARS) virus from Coronaviridae family. The compound is the biologically active form of the GS 441524 prodrug and being triphosphorylated, it competes with natural nucleoside triphosphates in cells and interferes with viral RNA synthesis.  Made to order.

    Formula:C12H12N5O13P3·4Na
    Purity:(31P-Nmr) Min. 95 Area-%
    Color and Shape:White Powder
    Molecular weight:531.20 g/mol

    Ref: 3D-FG167050

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product