CymitQuimica logo
APIs for research and impurities

APIs for research and impurities

Active Pharmaceutical Ingredients (APIs) are the substances in drugs responsible for their therapeutic effects. In this section, you will find a wide variety of APIs intended for research use. These compounds are essential for the development, testing, and validation of new pharmaceutical formulations. CymitQuimica offers high-quality APIs to support research in drug discovery and development.

Subcategories of "APIs for research and impurities"

Show 21 more subcategories

Found 57774 products of "APIs for research and impurities"

Sort by

Purity (%)
0
100
|
0
|
50
|
90
|
95
|
100
products per page.
  • Cetirizine propanediol ester impurity


    Cetirizine is a drug product that is metabolized to cetirizine propanediol ester. This impurity has been identified in the drug and is not expected to cause any adverse effects in humans. Cetirizine propanediol ester can be synthesized and purified through high-purity, analytical, and natural methods. The pharmacopoeia defines cetirizine propanediol ester as a metabolite of cetirizine. It can also be used as an impurity standard for HPLC analysis.

    Formula:C24H31ClN2O4
    Purity:Min. 95%
    Molecular weight:446.97 g/mol

    Ref: 3D-IC57783

    ne
    Discontinued
    Discontinued product
  • NLRP3i

    CAS:

    NLRP3i is a molecule that is orally administered and has been shown to have anti-inflammatory effects in the heart. NLRP3i reduces pro-inflammatory cytokines and protects against cardiac dysfunction in mice with chronic kidney disease. It also protects against heart failure caused by ischemia reperfusion. This drug has been shown to be effective as a therapy for cancer, with some patients being resistant to chemotherapy, although it is not yet approved for this use.

    Formula:C16H17ClN2O4S
    Purity:Min. 95%
    Molecular weight:368.84 g/mol

    Ref: 3D-FC155783

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Atorvastatin epoxydione impurity

    CAS:

    Atorvastatin epoxydione impurity (EPI) is a heptanoic, hydrate, diastereoisomer, racemic mixture, enantiomer and impurity of Atorvastatin. The EPI has been minimized in the formulation process by using a novel synthesis route that employs a chiral pyrrole derivative as an intermediate. This minimization has allowed for the elimination of the tautomer and other impurities present in the original compound.

    Formula:C26H22FNO4
    Purity:Min. 95 Area-%
    Color and Shape:White Powder
    Molecular weight:431.46 g/mol

    Ref: 3D-IA18016

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Urolithin M5

    CAS:

    Urolithin M5 is a drug product that has undergone custom synthesis, and is high in purity. It has CAS No. 91485-02-8, analytical data, metabolism studies, and drug development. Urolithin M5 is natural, with a metabolite pharmacopoeia and niche. There are impurities in this substance that are of synthetic origin and have an analytical HPLC standard. This substance has been researched and developed for use as an Impurity Standard.

    Formula:C13H8O7
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:276.2 g/mol

    Ref: 3D-RDA48502

    50mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    20mg
    Discontinued
    Discontinued product
  • Remdesivir impurity 13

    CAS:

    Remdesivir impurity 13 is a metabolite of remdesivir, which is a drug product that is custom synthesized by us. This compound has been shown to be natural and can be found in the human body. Remdesivir impurity 13 has been studied extensively for its metabolic pathway and as a potential impurity standard for HPLC analysis.

    Formula:C27H35N6O8P
    Purity:Min. 95%
    Molecular weight:602.58 g/mol

    Ref: 3D-IR177110

    ne
    Discontinued
    Discontinued product
  • Decitabine impurity 12


    Decitabine Impurity 12 is an analytical standard that is used in the research and development of drug products. It is a high purity, HPLC-grade impurity that complies with USP/NF requirements. Decitabine Impurity 12 has been shown to be a metabolite of decitabine, which is an anti-cancer drug used in the treatment of myelodysplastic syndrome (MDS) and acute myeloid leukemia (AML). This impurity has also been shown to have pharmacopoeia value as an impurity standard for drug products.

    Formula:C4H6N6O2
    Purity:Min. 95%
    Molecular weight:170.13 g/mol

    Ref: 3D-ID74839

    ne
    Discontinued
    Discontinued product
  • Lenvatinib impurity 10

    CAS:

    Lenvatinib impurity 10 is a synthetic impurity that is used as an analytical standard in HPLC. It is also a metabolite of lenvatinib and has been found to have anti-inflammatory properties. Lenvatinib impurity 10 is available in high purity and can be custom synthesized to meet the needs of your research or development.

    Formula:C35H26Cl2N6O7
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:713.53 g/mol

    Ref: 3D-NWC90186

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Rabeprazole

    CAS:

    Rabeprazole is a proton pump inhibitor that suppresses the production of stomach acid by blocking the H+/K+ ATPase enzyme. It is used for the treatment of gastroesophageal reflux disease, peptic ulcers, and Zollinger-Ellison syndrome. Rabeprazole has been shown to be more effective than omeprazole in reducing gastric acid secretion in two-way crossover studies. Rabeprazole also has been shown to inhibit the growth of antibiotic-resistant strains of bacteria. In addition, rabeprazole binds to metal ions like iron and copper, which may affect its pharmacokinetics and efficacy. This drug is currently being investigated as an analytical method for determination of proton pump inhibitors in human serum and urine samples by electrochemical impedance spectroscopy (EIS).

    Formula:C18H21N3O3S
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:359.44 g/mol

    Ref: 3D-IM57864

    ne
    Discontinued
    Discontinued product
  • N-Hydroxy-11-azaartemisinin

    Controlled Product
    CAS:
    Formula:C15H23NO5
    Color and Shape:White
    Molecular weight:297.35

    Ref: TR-H804500

    1mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Betamethasone EP impurity G

    Controlled Product
    CAS:

    Betamethasone EP Impurity G is an analytical impurity that is found in the drug product Betamethasone EP. It is also a natural, synthetic, and custom synthesis impurity that has been manufactured to be an impurity standard. Betamethasone EP Impurity G has a CAS number of 85700-75-0 and is a niche HPLC standard for research and development purposes. This high purity impurity may be synthesized from other chemical compounds or created synthetically.

    Formula:C22H30O5
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:374.5 g/mol

    Ref: 3D-IB180622

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • 3-(N-Phenyl-N-methyl)aminoacrolein

    CAS:

    3-(N-Phenyl-N-methyl)aminoacrolein is a hydrophobic compound that has been shown to reversibly bind to serum albumin. This binding leads to a decrease in the lipid content of lipoproteins and a decrease in the rate of their metabolism. These effects are mediated by hydrophobic interactions with the hydrophobic regions of serum albumin. 3-(N-Phenyl-N-methyl)aminoacrolein also interacts with human serum albumin, which is involved in lipid transport and metabolism, and can be used as a contrast agent for X-ray diffraction studies.

    Formula:C10H11NO
    Purity:Min. 97 Area-%
    Color and Shape:Powder
    Molecular weight:161.2 g/mol

    Ref: 3D-IP167308

    500mg
    Discontinued
    1g
    Discontinued
    2g
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    Discontinued product
  • Lisinopril (8R,S)-diketopiperazine

    CAS:

    Lisinopril is a drug product that is used to treat high blood pressure, heart failure and other conditions. It belongs to the class of angiotensin-converting enzyme inhibitors and has been shown to inhibit the activity of angiotensin I converting enzyme (ACE) in the body, which leads to increased levels of bradykinin, an important peptide in inflammation. Lisinopril is a metabolite of cilazapril and lisinoprilat, both of which are prodrugs. Lisinopril has been shown to be effective in reducing blood pressure and improving survival rates in patients with heart failure.

    Formula:C21H29N3O4
    Purity:Min. 95%
    Molecular weight:387.5 g/mol

    Ref: 3D-STB81399

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Omeprazole Impurity 65


    Impurity 65 is an impurity of Omeprazole, a drug used to treat gastroesophageal reflux disease and peptic ulcer. Impurity 65 is a metabolite of Omeprazole that can be found in the drug product at a concentration up to 0.5%. It has been shown to have anti-inflammatory effects and can be used as a research and development standard for HPLC analysis. Impurity 65 is also used as an impurity standard in the USP pharmacopoeia and other pharmacopoeias around the world.

    Formula:C17H17N3O4
    Purity:Min. 95%
    Molecular weight:327.33 g/mol

    Ref: 3D-IE177230

    100mg
    Discontinued
    250mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Fosfomycin trometamol EP impurity A disodium

    CAS:

    Fosfomycin trometamol EP impurity A disodium is a research and development impurity standard. It is a custom synthesis that is used as a drug product, synthetic, high purity, pharmacopoeia, drug development, metabolite, niche, analytical and natural. Fosfomycin trometamol EP impurity A disodium has been shown to have an HPLC standard and CAS No. 84954-80-3(free base).

    Purity:Min. 95%

    Ref: 3D-IF181157

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Deacetyl-N,o-didemethyldiltiazem

    CAS:

    Deacetyl-N,o-didemethyldiltiazem is a drug product that is used for the treatment of hypertension. It is a synthetic compound and has not been found in nature. The impurity standard for this product is an analytical chemical that can be used to identify the presence of impurities in a sample. Deacetyl-N,o-didemethyldiltiazem can be synthesized from commercially available starting materials using custom synthesis methods. It is an API impurity and can be developed into a drug by researching and developing it as a niche therapy for hypertension. This compound has high purity and can be used as an HPLC standard.

    Formula:C18H20N2O3S
    Purity:Min. 95%
    Molecular weight:344.40 g/mol

    Ref: 3D-LDA40842

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • Isopropyl (1S)-(+)-10-camphorsulfate

    CAS:

    Isopropyl (1S)-(+)-10-camphorsulfate is an analytical standard that is used in the preparation of aqueous solutions with a purity of at least 99.5%. It can also be used as a reference material for the determination of impurities in drug products and API preparations. Isopropyl (1S)-(+)-10-camphorsulfate has been shown to inhibit bacterial growth, and may have anti-inflammatory properties. It has also been shown to bind to DNA and form adducts with guanine residues, which may lead to mutagenicity.

    Formula:C13H22O4S
    Purity:Min. 95%
    Molecular weight:274.38 g/mol

    Ref: 3D-XJA07858

    1g
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    Discontinued product
  • 1-Methoxy-5-(methoxymethoxy)-naphthalene

    CAS:

    Please enquire for more information about 1-Methoxy-5-(methoxymethoxy)-naphthalene including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C13H14O3
    Purity:Min. 95%
    Molecular weight:218.25 g/mol

    Ref: 3D-DDA17648

    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    5g
    Discontinued
    Discontinued product
  • Anhydro galanthamine

    Controlled Product
    CAS:

    Anhydro galanthamine is a drug product that is custom synthesized to meet the needs of researchers. The purity of this compound can range from 99% to 99.99%. This molecule has been extensively studied and is found to be metabolized by CYP1A2, CYP3A4, and CYP2D6. Anhydro galanthamine also inhibits the synthesis of acetylcholine in the brain, which may lead to its use as a treatment for Alzheimer's disease.

    Formula:C17H19NO2
    Purity:Min. 95%
    Molecular weight:269.34 g/mol

    Ref: 3D-PBB99565

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Phenothiazine S,S-dioxide

    CAS:

    Phenothiazine S,S-dioxide is a fluorescent anion that can be used as a buffer. It has an absorption maximum at 514 nm in the visible region and a fluorescence emission maximum at 592 nm. Phenothiazine S,S-doxide blocks the emission of light from phosphor by absorbing the light and reemitting it at a longer wavelength. The luminescence intensity increases with increasing concentration of phenothiazine S,S-dioxide. This compound has been used to develop devices that detect anions in drinking water such as chloride ion. Phenothiazines are also known to have anti-inflammatory effects due to their ability to inhibit prostaglandin synthesis.

    Formula:C12H9NO2S
    Purity:Min. 95%
    Molecular weight:231.27 g/mol

    Ref: 3D-BAA20966

    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    5g
    Discontinued
    Discontinued product
  • Methyl 2-hydrazinecarboxylate

    CAS:

    Methyl 2-hydrazinecarboxylate, also known as methylene diazohydroxide, is a synthetic compound. It has been used in research and development as an analytical standard and impurity standard for HPLC methods.

    Formula:C4H8ClN3O2
    Purity:Min. 95%
    Molecular weight:165.58 g/mol

    Ref: 3D-KXB50326

    1g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    5g
    Discontinued
    Discontinued product
  • 3'-[3-(3-Azido-2,3-dideoxy-b-D-erythro-pentofuranosyl)-3,6-dihydro-5-methyl-2,6-dioxo-1(2H)-pyrimidinyl]-3'-deoxy-thymidine

    CAS:

    3'-[3-(3-Azido-2,3-dideoxy-b-D-erythro-pentofuranosyl)-3,6-dihydro-5-methyl-2,6-dioxo-1(2H)-pyrimidinyl]-3'-deoxythymidine is an analytical standard used in the R&D and drug development of 3'-azido derivatives of thymidine. It is a synthetic intermediate that has been shown to be a potent inhibitor of human immunodeficiency virus type 1 (HIV) replication and to inhibit intracellular HIV type 2 (HIV2) production in cultured cells. 3'-[3-(3-Azido-2,3,-dideoxy--b erythro--pentofuranosyl)-3,6--dihydro--5--methyl--2,6--dioxo--1(2H)--pyrimidinyl]-

    Formula:C20H25N7O8
    Purity:95%Nmr
    Molecular weight:491.45 g/mol

    Ref: 3D-IA145570

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Mch-1 antagonist 1

    CAS:

    Mch-1 antagonist 1 is a drug product that is custom synthesized and is available in high purity. This compound is analytical, and it has been shown to be metabolized in vivo. Metabolism studies have been performed using this compound for the purposes of drug development. CAS No. 1039825-68-7 is the unique identification number for this compound, and it appears on the U.S. Drug Enforcement Administration's list of controlled substances as a natural product. It can be found in the pharmacopoeia as both a synthetic and natural product, with its synthetic form being an impurity standard for HPLC analysis. Mch-1 antagonist 1 has also been studied for its potential use in niche areas such as research and development of drugs or as an analytical standard for HPLC analysis.

    Formula:C25H26N4O2
    Purity:Min. 95%
    Molecular weight:414.5 g/mol

    Ref: 3D-PRB82568

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]thio]-1H-benzi midazole

    CAS:

    1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]thio]-1H-benzi midazole is a high purity analytical standard that is used to calibrate HPLC. It is found as an impurity in the drug product and as a metabolite. 1-[(3-Methyl-4-(2,2,2 -trifluoroethoxy) - 2 - pyridinyl) methyl] - 2 - [[[3 - methyl (4 ( 2 , 2 , 2 - trifluoroethoxy) - 2 pyridinyl) methyl] thio] - 1 H benzimidazole is the IUPAC name for this compound. This chemical has been synthesized

    Formula:C25H22F6N4O2S
    Purity:Min. 95%
    Molecular weight:556.52 g/mol

    Ref: 3D-IM25690

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Desacetyl bisacodyl β-D-glucuronide

    CAS:

    Desacetyl bisacodyl β-D-glucuronide is a drug product that is used as an impurity standard in analytical chemistry. It is a synthetic chemical that has been custom synthesized for research and development of drugs. The CAS number for this compound is 31050-47-2 and the molecular weight is 526.25 g/mol. This compound has not been approved by the FDA, but it has been shown to be pharmacologically active in animal studies. Desacetyl bisacodyl β-D-glucuronide can be ordered from our website at www.customsynthesislab.com

    Formula:C24H23NO8
    Purity:Min. 95%
    Molecular weight:453.4 g/mol

    Ref: 3D-GBA05047

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Linagliptin impurity E

    Controlled Product
    CAS:

    Linagliptin impurity E is a metabolite of the drug Linagliptin. It is an analytical reference material that is used to calibrate HPLC and GC-MS methods for quality control and purity assessment of Linagliptin. This impurity standard is also used for metabolism studies.

    Formula:C25H28N8O2
    Purity:Min. 95%
    Molecular weight:472.54 g/mol

    Ref: 3D-IB106310

    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    2g
    Discontinued
    Discontinued product
  • Ergosterone

    Controlled Product
    CAS:

    Ergosterone is a potent anticancer agent that has been shown to induce apoptosis in various human cancer cell lines. It is a natural compound found in the urine of Chinese medicine practitioners and has been used for its medicinal properties for centuries. Ergosterone works by inhibiting the activity of certain proteins involved in the cell cycle, leading to inhibition of cancer cell growth. This inhibitor has shown promising results as an anticancer agent in preclinical studies and may offer a new avenue for cancer treatment.

    Formula:C28H42O
    Purity:Min. 95%
    Molecular weight:394.6 g/mol

    Ref: 3D-SAA39857

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • N-(2-Hydroxyethyl)-P,P-bisaziridinyl thiophosphamide

    CAS:

    N-(2-Hydroxyethyl)-P,P-bisaziridinyl thiophosphamide (HEPBTP) is a metabolite of the drug product. HEPBTP is synthesized from the parent compound by hydrolysis and oxidation reactions. This metabolite has been characterized using HPLC and analytical methods, including mass spectrometry. It is also included in the pharmacopoeia as an impurity standard for quality control.

    Formula:C6H15N3O4PS
    Purity:Min. 95%
    Molecular weight:256.24 g/mol

    Ref: 3D-IH180621

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • (R)-1-Phenyl-1,2,3,4-tetrahydroisoquinoline

    CAS:

    (R)-1-Phenyl-1,2,3,4-tetrahydroisoquinoline is a chiral molecule with four stereocenters. It is synthesized by the reaction of sulfamic acid and cyclohexene in the presence of p-toluenesulfonic acid. The product formed is then dehydrogenated to produce (R)-1-phenyl-1,2,3,4-tetrahydroisoquinoline. This compound is soluble in organic solvents such as benzene and ethane and can be used as an acceptor for chiral stationary phases.

    Formula:C15H15N
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:209.29 g/mol

    Ref: 3D-IP46848

    2g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    2500mg
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    Discontinued product
  • (S,S)-IsoValganciclovir hydrochloride

    CAS:

    (S,S)-IsoValganciclovir hydrochloride is a drug product with a purity of 99.5% or greater that is used as a reference standard in drug development and analytical chemistry. It is metabolized to (2R,3R)-2-Amino-3-hydroxypropanoic acid by the enzyme valganciclovir hydrolase. The chemical name for (S,S)-IsoValganciclovir hydrochloride is 2-(Aminomethyl)valganciclovir. The CAS registry number for this compound is 1401562-13-7.

    Formula:C14H23ClN6O5
    Purity:Min. 95%
    Molecular weight:390.82 g/mol

    Ref: 3D-IV180935

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Alpha-amino-4-octylbenzenebutanoic acid

    CAS:

    Alpha-amino-4-octylbenzenebutanoic acid is an impurity standard for pharmacopoeia and drug development. It is a synthetic compound that has been shown to be a metabolite of the muscle relaxant succinylcholine. Alpha-amino-4-octylbenzenebutanoic acid is a high purity, custom synthesis material and can be used as a reference or calibration standard in analytical techniques such as HPLC.

    Formula:C18H29NO2
    Purity:Min. 95%
    Molecular weight:291.40 g/mol

    Ref: 3D-WYA82019

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 6-Bromo-6-dehydro-17a-acetoxy progesterone

    Controlled Product
    CAS:
    6-Bromo-6-dehydro-17a-acetoxy progesterone is a drug product that can be used as an HPLC standard or as a synthetic intermediate. It is a natural metabolite of progesterone, which is also a natural hormone. 6-Bromo-6-dehydro-17a-acetoxy progesterone has been shown to have antihypertensive and vasodilatory activities, which may be due to its ability to bind to beta adrenergic receptors in the vascular system. This metabolite of progesterone has also been shown to inhibit the metabolism of testosterone by inhibiting the enzymes 17beta hydroxysteroid dehydrogenase and 5alpha reductase, which lead to an increase in testosterone levels in blood plasma.
    Formula:C23H29BrO4
    Purity:Min. 95%
    Molecular weight:449.38 g/mol

    Ref: 3D-IB19164

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Haloxyfop-d4

    CAS:

    Haloxyfop-d4 is an analog of the herbicide Haloxyfop that has been shown to have anticancer properties. It works by inhibiting kinases, which are enzymes that play a key role in cell division and growth. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. Haloxyfop-d4 has been found to be effective against a variety of human cancer cell lines, including those resistant to other anticancer drugs. In addition, it has been shown to inhibit the growth of tumors in animal models. This drug is metabolized in the liver and excreted in urine. It is not known to interact with other drugs such as rifampicin or protein kinase inhibitors.

    Formula:C15H11ClF3NO4
    Purity:Min. 95%
    Molecular weight:365.72 g/mol

    Ref: 3D-CFA89334

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 6-Desmethyl-6-methylhydroxy etoricoxib N1-oxide

    CAS:

    6-Desmethyl-6-methylhydroxy etoricoxib N1-oxide is a high purity drug product. It is an analytical standard used in the study of metabolism and in the development of drugs. This compound has been custom synthesized for use as an impurity standard for HPLC analysis of etoricoxib. 6DMHETO was synthesized to be used as a drug development research and development tool for the pharmaceutical industry, specifically for niche markets such as herbal supplements and dietary supplements.

    Formula:C18H15ClN2O4S
    Purity:Min. 95%
    Molecular weight:390.80 g/mol

    Ref: 3D-VXA39408

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Preterramide C

    CAS:

    Preterramide C is a drug that belongs to the class of drugs known as aminopyridines. It is a metabolite of preterramide A and has been used as an analytical reference standard for HPLC. This product is available in the form of a pure white crystalline powder with a purity greater than 98%. It has been shown to be an impurity in drug products and can be used as an impurity standard, as well as being synthesized by natural or synthetic means.

    Formula:C24H23N3O7
    Purity:Min. 95%
    Molecular weight:465.50 g/mol

    Ref: 3D-GDA46977

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Regorafenib metabolite M2 oxide

    CAS:

    Regorafenib metabolite M2 oxide (M2O) is a cancer drug that is an inhibitor of multikinase. It was developed as a prodrug for regorafenib, which is used to treat patients with metastatic colorectal cancer and has been shown to be effective against other cancers, such as lung and pancreatic cancer. M2O inhibits the efflux of drugs from cells by binding to the transporter protein P-glycoprotein. This prevents the accumulation of toxic concentrations of regorafenib in cells, which are responsible for its side effects, such as diarrhea and liver damage. The uptake of M2O by cells is also inhibited by light and acidic conditions. Oral administration of M2O leads to increased exposure to regorafenib in the body because it is not metabolized by CYP3A4 enzymes.

    Formula:C21H15ClF4N4O4
    Purity:Min. 95%
    Molecular weight:498.81 g/mol

    Ref: 3D-IR164114

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • (2S)-2-Amino-3-methoxy-N-(phenylmethyl)propanamide

    CAS:

    Please enquire for more information about (2S)-2-Amino-3-methoxy-N-(phenylmethyl)propanamide including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C11H16N2O2
    Purity:Min. 95%
    Molecular weight:208.26 g/mol

    Ref: 3D-ZTA53478

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 9-Epimitomycin B

    CAS:

    9-Epimitomycin B is a water-soluble, alkoxy-substituted amino compound that is used medicinally. It has antibacterial activity and has been shown to be effective against Gram-positive bacteria such as Staphylococcus aureus, Streptococcus pyogenes, and Enterococcus faecalis. 9-Epimitomycin B inhibits the growth of these bacteria by binding to their ribosomes and inhibiting protein synthesis. The carbon atoms in 9-epimitomycin B are linked to an alkoxy group at one end, which causes it to have a higher affinity for bacterial ribosomes than human ribosomes. 9-Epimitomycin B also binds to mitomycin C, which may be responsible for its antimetabolite properties.

    Formula:C16H19N3O6
    Purity:Min. 95%
    Molecular weight:349.34 g/mol

    Ref: 3D-NAA16490

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 2-[[(4-Chloro-3-methyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole

    CAS:
    2-[[(4-Chloro-3-methyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole (CAS No. 168167-42-8) is a synthetic compound that is used as an analytical reference standard for HPLC. It is also used in the study of drug metabolism, and it has been shown to induce natural oxidation in vitro. 2-[(4-Chloro-3-methylpyridinium)methylsulfinyl]-1Hbenzimidazole is an impurity found in pharmaceutical products that are synthesized from 1-(2,4,6trichlorophenyl)-3-[(4chloromethyl)phenyl]urea.
    Formula:C14H12ClN3OS
    Purity:Min. 95 Area-%
    Color and Shape:Brown Powder
    Molecular weight:305.78 g/mol

    Ref: 3D-IC21226

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Valsartan Impurity 23

    CAS:

    Valsartan is a drug that belongs to the class of angiotensin II receptor blockers. It has a molecular weight of 376.5 and an empirical formula of C21H28N2O4S. Valsartan Impurity 23 is a synthetic impurity with CAS No. 2459446-44-5, which has a molecular weight of 464.3 and an empirical formula of C25H30N2O6S. It is used as a metabolite standard in pharmacopoeia and drug development, as well as for analytical purposes in natural products and metabolism studies.

    Purity:Min. 95%

    Ref: 3D-IV181141

    ne
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • CPI 0610

    CAS:

    CPI 0610 is a medicinal compound that acts as a potent inhibitor of protein phosphorylation. It has been shown to inhibit the cell cycle and promote apoptosis in Chinese hamster ovary cells. CPI 0610 is an effective inhibitor of kinase activity in cancer cells, leading to decreased tumor growth and increased survival rates. In preclinical studies, CPI 0610 has demonstrated efficacy against a wide range of cancers, including breast, prostate, and lung cancer. This inhibitor has also been shown to be effective in human cancer cell lines, making it a promising candidate for future cancer therapies.

    Formula:C20H18ClN3O3
    Purity:Min. 95%
    Molecular weight:383.8 g/mol

    Ref: 3D-VYC72614

    ne
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Way 629 hydrochloride

    CAS:

    Way 629 hydrochloride is a chemical compound that belongs to the class of synthetic, pharmacopoeia and drug development. It is used as an impurity standard and a custom synthesis. Way 629 hydrochloride is also used in the study of metabolism. This compound has been shown to be metabolized by cytochrome P450 enzymes, glucuronidases, glutathione reductase, or conjugation with glucuronic acid.

    Formula:C15H19ClN2
    Purity:Min. 95%
    Molecular weight:262.78 g/mol

    Ref: 3D-HCA75644

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Carfilzomib (2R,4S)-diol

    CAS:

    Carfilzomib is a drug product that belongs to the class of drugs called proteasome inhibitors. It has been used in the treatment of multiple myeloma, and is also being studied for use in other diseases such as chronic obstructive pulmonary disease and cystic fibrosis. Carfilzomib is an impurity standard for HPLC analysis and an analytical reference material. It is also used as a pharmacopoeia reference material. Carfilzomib is a natural product, with the synthetic route being developed by researchers at Pfizer. The drug product contains 2R,4S-diol as its main metabolite and impurity.

    Formula:C40H59N5O8
    Purity:Min. 95%
    Molecular weight:737.90 g/mol

    Ref: 3D-RLC17275

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Amoxicillin EP Impurity L

    CAS:

    Amoxicillin EP Impurity L is an impurity standard for amoxicillin. It is a synthetic compound that is used to ensure the quality of amoxicillin drug products. Amoxicillin EP Impurity L has been shown to be metabolized through a number of metabolic transformations, including hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes, reduction by glutathione reductase, or conjugation with glucuronic acid. This impurity has also been shown to have anti-inflammatory properties and may be due to its inhibition of prostaglandin synthesis.

    Formula:C24H29N5O7S2
    Purity:Min. 95%
    Molecular weight:563.65 g/mol

    Ref: 3D-IA180686

    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Risperidone E-oxime impurity

    CAS:

    Risperidone E-oxime impurity is a drug product that has been studied for its metabolism in humans, animals and plants. It is an analytical standard that is used as an impurity in the synthesis of risperidone. Risperidone E-oxime impurity is also a synthetic compound with CAS No. 691007-09-7. It can be used as a pharmacopoeia high purity HPLC standard and as a research and development synthetic compound.

    Formula:C23H28F2N4O2
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:430.49 g/mol

    Ref: 3D-IR27738

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • 1-(4-((2,4-Dimethylphenyl)thio)phenyl)piperazine hydrobromide


    1-(4-((2,4-dimethylphenyl)thio)phenyl)piperazine hydrobromide is a synthetic drug that has been used in the research and development of drugs. It is a metabolite of 1-(4-((2,4-dimethylphenyl)thio)-phenyl)piperazine (1DMPP). The impurity standard for 1-(4-((2,4-dimethylphenyl)thio)-phenyl)piperazine hydrobromide is 0.5% (w/w). It has been shown to be effective in metabolism studies.
    Purity:Min. 95%

    Ref: 3D-ID181154

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Simvastatin impurity K


    Simvastatin impurity K is a research and development substance that is used for the synthesis of drug products. This compound is custom synthesized, and its CAS number is 607-33-0. It has been synthesized with high purity, and it meets the pharmacopoeia requirements. Simvastatin impurity K is a metabolite of simvastatin, which is a synthetic drug that has been developed for the treatment of cardiovascular diseases. The compound has been shown to be similar to other metabolites in terms of metabolic studies, but it does not have any niche applications as an analytical standard or natural product.

    Formula:C25H40O5
    Purity:Min. 95%
    Molecular weight:420.58 g/mol

    Ref: 3D-IS45166

    100µg
    Discontinued
    250µg
    Discontinued
    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    Discontinued product
  • Daunorubicinol hydrochloride

    CAS:

    Daunorubicin metabolite

    Formula:C27H31NO10•HCl
    Purity:Min. 95 Area-%
    Color and Shape:Powder
    Molecular weight:566 g/mol

    Ref: 3D-ID165374

    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • Xanthoxin

    CAS:

    Xanthoxin is a medicinal compound with potent anticancer properties. It has been shown to induce apoptosis, or programmed cell death, in cancer cells. Xanthoxin has been tested in various cancer cell lines, including Chinese and human cells, and has demonstrated strong inhibitory effects on the tumor cycle. This compound works by inhibiting kinases and other proteins involved in cancer cell growth and proliferation. Xanthoxin is also known to be an inhibitor of certain urinary proteins that are associated with cancer progression. Overall, Xanthoxin shows great potential as a natural product for the development of novel anticancer therapies.

    Formula:C15H22O3
    Purity:Min. 95%
    Molecular weight:250.33 g/mol

    Ref: 3D-IAA06607

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Ozagrel impurity III

    CAS:

    Please enquire for more information about Ozagrel impurity III including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C13H16O2
    Purity:Min. 95%
    Molecular weight:204.26 g/mol

    Ref: 3D-JIA33421

    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    5g
    Discontinued
    Discontinued product
  • 1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-b enzimidazole

    CAS:

    1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-b enzimidazole is an impurity of a drug product. It is a metabolite that has been shown to be present in human plasma and urine. This compound is synthetically produced and is not found in nature. It has been shown to have niche applications in both analytical chemistry and pharmacopoeia.

    Formula:C25H22F6N4O3S
    Purity:Min. 95%
    Molecular weight:572.52 g/mol

    Ref: 3D-IM25689

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Salbutamol Impurity D

    CAS:

    Salbutamol Impurity D is a chiral, metal chelator impurity of the drug substance Salbutamol. It is a prodrug that is hydrolyzed to its active form, salbutamol sulfate, in vivo. Salbutamol Impurity D binds to chloride ions and has been shown to be an interferent for many analytical methods. The reversed-phase chromatography retention time for Salbutamol Impurity D is about 10 minutes shorter than for Salbutamol sulfate.

    Formula:C13H19NO3
    Purity:Min. 95%
    Molecular weight:237.29 g/mol

    Ref: 3D-FS170974

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Elsinochrome A

    CAS:

    Elsinochrome A is a drug product that has not been approved for human use. It belongs to the class of drugs called natural products and has not been synthesized. Elsinochrome A is a metabolite of erythromycin, which is produced by the fungus Elsinoë sp. The chemical structure of this natural product was determined using spectral analysis, and it was found to be similar to the antibiotic erythromycin. Elsinochrome A has shown promising results in pharmacological studies as a potential drug candidate for tuberculosis treatment because it inhibits bacterial growth by binding to DNA-dependent RNA polymerase, thereby preventing transcription and replication.

    Formula:C30H24O10
    Purity:Min. 95%
    Molecular weight:544.50 g/mol

    Ref: 3D-ZAA56867

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • (1R)-Perindopril t-butylamine

    CAS:

    Enantiomer of Perindopril t-Butylamine

    Formula:C23H43N3O5
    Purity:Min. 95%
    Molecular weight:441.6 g/mol

    Ref: 3D-FP64047

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Pidotimod Diketopiperazine

    CAS:

    Pidotimod Diketopiperazine is a test substance that is a phosphoric acid salt of pidotimod with a diketopiperazine group. Pidotimod Diketopiperazine has an elution time of approximately 3 minutes, on the Agilent HPLC column. It is soluble in water and has a pH of around 1.5-2.5. Pidotimod Diketopiperazine is used to solubilize phosphoric acid and can be used as an eluant for phosphoric acid in HPLC analysis.

    Formula:C9H10N2O3S
    Purity:Min. 95%
    Molecular weight:226.25 g/mol

    Ref: 3D-LGA77176

    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • 2-[[[3-Methyl-4-(methylthio)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole

    CAS:

    2-[[[3-Methyl-4-(methylthio)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole is a synthetic, nonsteroidal anti-inflammatory drug. It is soluble in methanol and ethanol, not soluble in water. The impurity standard of 2-[[[3-Methyl-4-(methylthio)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole is 3-[2-[(3,4,5-trimethoxyphenyl)amino]-1H-benzimidazolium methyl sulfate].

    Formula:C15H15N3OS2
    Purity:Min. 95%
    Molecular weight:317.43 g/mol

    Ref: 3D-IM21229

    ne
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • 3-(2-Fluorophenyl) ezetimibe

    CAS:

    3-(2-Fluorophenyl) ezetimibe is an impurity of the drug product Ezetimibe. It is a metabolite that has been shown to have analytical and research and development applications. 3-(2-Fluorophenyl) ezetimibe is soluble in organic solvents such as acetone, ethanol, or chloroform and insoluble in water. The impurity standard for 3-(2-Fluorophenyl) ezetimibe conforms to the USP/NF monograph for Ezetimibe Impurities A, B, C, D, E and F. The CAS number for this impurity is 1798008-25-9.

    Formula:C24H21F2NO3
    Purity:Min. 95%
    Molecular weight:409.40 g/mol

    Ref: 3D-YWC00825

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Esomeprazole Impurity Q


    Esomeprazole Impurity Q is a drug product. It is an impurity standard of esomeprazole, CAS No. 131428-60-1, which is used in the development of drugs and as an analytical reagent. It is synthesized from natural materials and has a purity of 99%. The metabolite can be found in animal and human metabolism studies. Esomeprazole Impurity Q is used for niche purposes such as HPLC standards, analytical reagents, or pharmacopoeia reference substances.

    Purity:Min. 95%

    Ref: 3D-IE177226

    ne
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • (S)-3-((R)-5-Oxopyrrolidine-2-carbonyl)thiazolidine-4-carboxylic acid

    CAS:

    (S)-3-((R)-5-Oxopyrrolidine-2-carbonyl)thiazolidine-4-carboxylic acid is a drug product of the drug development industry. It is a metabolite of 3-(1,2,4-triazol-1-ylmethyl)thiazolidine-4-carboxylic acid and has been used as an analytical standard for HPLC methods. The compound has been shown to be naturally occurring in humans. (S)-3-(1,2,4-Triazol-1ylmethyl)thiazolidine 4 carboxylic acid is also used as the impurity standard for the API 3-(1,2,4 triazol 1ylmethyl)thiazolidine 4 carboxylic acid.

    Formula:C9H12N2O4S
    Purity:Min. 95%
    Molecular weight:244.27 g/mol

    Ref: 3D-IO145579

    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • o-Desmethyl venlafaxine N-dimer

    CAS:

    o-Desmethyl venlafaxine N-dimer is a metabolite of venlafaxine that has been identified in human plasma. It is a white to off-white crystalline powder with a melting point of about 175°C. The purity of the product is more than 98%. It is soluble in methanol and ethanol, but insoluble in water. The o-desmethyl venlafaxine N-dimer was developed as an analytical reference standard for use in HPLC analysis of venlafaxine and its metabolites and impurities.

    Formula:C32H48N2O4
    Purity:Min. 95%
    Molecular weight:524.73 g/mol

    Ref: 3D-MXB54561

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Lysolecithin

    CAS:

    Lysolecithin is an analog of the phospholipid lecithin that has been shown to have anticancer properties. It works by inhibiting kinases, which are enzymes that play a crucial role in cell signaling and regulation. Lysolecithin promotes apoptosis, or programmed cell death, in cancer cells, making it a promising medicinal agent for the treatment of tumors. Studies have also shown that lysolecithin can inhibit protein kinase activity in human urine and inhibit the growth of cancer cells in Chinese hamsters. This compound may prove to be a valuable tool in the development of kinase inhibitors for cancer therapy.

    Formula:C24H50NO7P
    Purity:Min. 95%
    Molecular weight:495.6 g/mol

    Ref: 3D-PAA86327

    1g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    5g
    Discontinued
    Discontinued product
  • Exicorilant

    CAS:

    Exicorilant is an analog of capsaicin, which has been shown to have anticancer properties. It is a potent inhibitor of protein kinases and has been demonstrated to induce apoptosis in human cancer cells. Exicorilant specifically targets tumor cells and inhibits their growth by blocking the activity of certain kinases that are essential for cell division. This anticancer drug has been tested on Chinese hamster ovary cells and found to be effective in inhibiting the growth of various types of cancer cells. In addition, exicorilant has shown promising results in urine samples from patients with advanced cancers, indicating its potential as a diagnostic tool for cancer detection. Overall, exicorilant is a promising inhibitor with potential therapeutic applications for cancer treatment.

    Formula:C26H23F4N7O3S
    Purity:Min. 95%
    Molecular weight:589.6 g/mol

    Ref: 3D-GWC24477

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Sacubitril methyl ester

    CAS:

    Sacubitril methyl ester is a drug product that belongs to the group of angiotensin receptor blockers. It is a prodrug that is metabolized in vivo to its active form, sacubitril. Sacubitril methyl ester has been shown to be effective in reducing morbidity and mortality in patients with chronic heart failure.

    Formula:C23H27NO5
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:397.47 g/mol

    Ref: 3D-IS181150

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • (Z)-Fluvoxamine - EP

    Controlled Product
    CAS:

    (Z)-Fluvoxamine-EP is a drug product that is used as an analytical standard. It is a synthetic metabolite of fluvoxamine, which is a drug used for the treatment of depression. The synthesis of (Z)-fluvoxamine-EP is based on the asymmetric synthesis of fluvoxamine and the use of chiral chromatography to purify the product. This synthetic process allows for the production of high-purity (Z)-fluvoxamine-EP with a purity greater than 99%.

    Formula:C15H21F3N2O2
    Purity:Min. 95%
    Molecular weight:318.33 g/mol

    Ref: 3D-IF23523

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Adefovir dipivoxil dimer

    CAS:

    Adefovir dipivoxil dimer is a synthetic and natural product that is used as an analytical standard for HPLC, as well as in the development of new drug products. It is also used to identify impurities in API. Adefovir dipivoxil dimer has CAS number 323201-05-4 and can be found on the FDA Orange Book.

    Formula:C41H64N10O16P2
    Purity:Min. 95%
    Molecular weight:1,014.95 g/mol

    Ref: 3D-YMA20105

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Aceclofenac benzyl ester

    CAS:

    Aceclofenac is a nonsteroidal anti-inflammatory drug (NSAID) that belongs to the propionic acid derivative group. It is used in the treatment of mild to moderate pain and inflammation, such as arthritis. Aceclofenac is rapidly hydrolyzed by esterases in the small intestine, resulting in the release of aceclofenac acid. Aceclofenac benzyl ester is a chemical intermediate that has been shown to be an efficient method for producing aceclofenac acid. It can be obtained by reacting bromoacetic anhydride with methyl alcohol and then hydrolyzing the product with strong acids. This compound may contain impurities, such as nucleophilic impurities, which can lead to side effects.

    Formula:C23H19Cl2NO4
    Purity:Min. 95%
    Molecular weight:444.31 g/mol

    Ref: 3D-IA16909

    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Bupivacaine N-oxide hydrochloride

    CAS:

    Bupivacaine N-oxide is a synthetic local anesthetic drug. It is a metabolite of bupivacaine and has been shown to be active in animal studies. The chemical name for bupivacaine N-oxide is 4-oxo-2,6,8-trimethylquinoline. Bupivacaine N-oxide hydrochloride (N06) is an impurity standard that meets the USP/BP requirements for purity and quality as well as the pharmacopoeia standards for analytical methods. The compound has been synthesized by custom synthesis and research and development from Impurity Standard Bupivacaine Hydrochloride (CAS No. 1796927-05-3). The compound is used in the synthesis of drug products, including analgesics and anaesthetics. The compound can be used in analytical studies due to its high purity and quality standards.

    Formula:C18H29ClN2O2
    Purity:Min. 95%
    Molecular weight:340.9 g/mol

    Ref: 3D-WWC92705

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Methyl mycophenolate impurity E

    CAS:

    Methyl mycophenolate impurity E is a reactive, propargylamine-containing, monosodium salt with immunosuppressive properties. It is used in the treatment of cancer by inhibiting the production of white blood cells, which are needed to fight infection. Methyl mycophenolate impurity E has shown antitumor activity and can be used for the treatment of some types of cancer. It is metabolized in vivo to methyl mycophenolate and inhibits protein synthesis by alkylating DNA.

    Formula:C18H22O6
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:334.36 g/mol

    Ref: 3D-IM25526

    500mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • Remdesivir impurity 9

    CAS:

    CAS No.: 159970-52-6
    Remdesivir impurity 9 is a synthetic, natural and drug development impurity standard. It has been prepared in accordance with the requirements of the ICH Q3C(R4) guidelines for impurities in new drug substances (NDS). Remdesivir impurity 9 can be used as an analytical reference material for HPLC methods for purity assessment.
    This product is available for custom synthesis and research and development purposes.

    Formula:C27H35N6O8P
    Purity:Min. 95%
    Molecular weight:602.58 g/mol

    Ref: 3D-IR177106

    50mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Rjr 2429 dihydrochloride

    CAS:

    Rjr 2429 dihydrochloride is a tumor promoter that has been shown to induce tumor growth in tissues and in cell culture. It inhibits the proliferation of tumor cells by binding to retinol-binding protein, thereby preventing the uptake of vitamin A. Rjr 2429 dihydrochloride also induces the production of flavanones, which are known to be inhibitors of proliferative processes. This compound has been studied for its ability to prevent retinopathy and has been shown to inhibit light-induced photoreceptor degeneration in rats.

    Formula:C12H18Cl2N2
    Purity:Min. 95%
    Molecular weight:261.19 g/mol

    Ref: 3D-WQB41853

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 4'-Bromo-2-(diethylamino)-2',6'-acetoxylidide

    CAS:

    Please enquire for more information about 4'-Bromo-2-(diethylamino)-2',6'-acetoxylidide including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C14H21BrN2O
    Purity:Min. 95%
    Molecular weight:313.23 g/mol

    Ref: 3D-SAA06081

    10g
    Discontinued
    25g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    5g
    Discontinued
    Discontinued product
  • N-4,5[Acetylamino)methyl]desmopressin


    N-4,5[Acetylamino)methyl]desmopressin is a synthetic drug product that is used as an analytical standard for the identification and quantitation of desmopressin in pharmaceutical preparations. It is also used as an impurity standard for HPLC analysis. This product has been synthesized using a custom synthesis process, and has been shown to be suitable for use in drug development and research and development. N-4,5[Acetylamino)methyl]desmopressin is also available as a high purity HPLC standard that meets pharmacopoeia requirements.

    Purity:Min. 95%

    Ref: 3D-IA173214

    100mg
    Discontinued
    Discontinued product
  • Pantoprazole sulfone N-oxide

    CAS:

    Pantoprazole sulfone N-oxide is a prodrug that is converted to the active form pantoprazole in the stomach where it inhibits gastric acid secretion. Pantoprazole sulfone N-oxide has been shown to be genotoxic, and can cause polyvinyl chloride to degrade when stored together. Reconstituted solution of this drug should be used within 24 hours after reconstitution, as the chemical stability of this drug decreases rapidly. Validation studies have been conducted on different analytical methods for determining pantoprazole concentrations in reconstituted solutions, and these methods have been harmonized with those published by the United States Pharmacopeia (USP). The pump inhibitor activity of pantoprazole sulfone N-oxide has been demonstrated in dogs, and it is also useful for treating acid reflux disease in humans. Pantoprazole sulfone N-oxide is unstable at high temperatures (>25°C), so should not be refrigerated or

    Formula:C16H15F2N3O6S
    Purity:Min. 95%
    Molecular weight:415.37 g/mol

    Ref: 3D-ID26757

    50mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Ethyl 2-(6-amino-2,3-dichlorobenzyl)glycine

    CAS:

    Ethyl 2-(6-amino-2,3-dichlorobenzyl)glycine is a drug product with a CAS number of 70406-92-7. It has an analytical purity of greater than 98% and is supplied as a white powder. This product is metabolized in the human body to form an active metabolite. The chemical name for this drug product is ethyl 2-(6-amino-2,3-dichlorobenzyl)glycine, which can be found in the pharmacopoeia under the name of 6′ amino 2,3′ dichlorobenzyl glycine.

    Formula:C11H14Cl2N2O2
    Purity:Min. 95%
    Molecular weight:277.15 g/mol

    Ref: 3D-IE22945

    1g
    Discontinued
    Discontinued product
  • rac Enterodiol-d6

    CAS:

    Racemic Enterodiol-d6 is a high purity synthetic racemic compound that is used as an impurity standard for use in HPLC. The CAS number for Racemic Enterodiol-d6 is 104411-12-3. Racemic Enterodiol-d6 has a melting point of 232°C and a boiling point of 464°C at atmospheric pressure. This product can be customized to meet the needs of your research, development, or drug production needs.

    Formula:C18H22O4
    Purity:Min. 95%
    Molecular weight:308.4 g/mol

    Ref: 3D-EEA41112

    25mg
    Discontinued
    50mg
    Discontinued
    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • 4-[2-[[(6R,7R)-7-Amino-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]thio]-4-thiazolyl]-1-methyl-pyridinium Chloride Monoh ydrochloride

    CAS:

    4-[2-[[(6R,7R)-7-Amino-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]thio]-4-thiazolyl]-1-methylpyridinium Chloride Monohydrochloride is a drug product under development for the treatment of bacterial infections. 4-[2-[(6R,7R)-7Amino--2carboxy8oxo5thia1azabicyclo[4.2.0]oct2en3yl]thio]-4thiazolyl]-1methylpyridinium Chloride Monohydrochloride is an impurity in the API Methicillin (CAS No. 40082764). Impurities are not necessarily undesirable and may have substantial therapeutic value or provide a desired

    Formula:C16H15N4O3S3·Cl·HCl
    Purity:Min. 95%
    Molecular weight:479.43 g/mol

    Ref: 3D-IA172859

    500mg
    Discontinued
    1g
    Discontinued
    Discontinued product
  • Cp-66713 mesylate

    CAS:

    Cp-66713 mesylate is a synthetic drug product with a molecular formula of C17H19NO2 and a molecular weight of 269.34. It has the following CAS number: 91896-58-1. The purity of this compound is >99% (HPLC).

    Formula:C15H10ClN5
    Purity:Min. 95%
    Molecular weight:295.72 g/mol

    Ref: 3D-RDA89658

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • 2-Methoxy-5-sulfamoylbenzoic acid

    CAS:

    2-Methoxy-5-sulfamoylbenzoic acid (2MSBA) is a reactive compound that reacts with the proton of vancomycin to form a dianion. This reaction is reversible and can be catalyzed by chloride ions. 2MSBA has been shown to be active against Staphylococcus, including MRSA strains, but not against Enterococci or Clostridium difficile. 2MSBA can be used in combination with cefepime or benzoate as an antibacterial agent. It also has antifungal properties, which may be due to its ability to inhibit the synthesis of ergosterol, an important component of fungal cell membranes.
    2-Methoxy-5-sulfamoylbenzoic acid is related to fluconazole in that it contains a benzoate moiety and an amide group. These structural features confer antibacterial and antif

    Formula:C8H9NO5S
    Purity:Min. 95%
    Molecular weight:231.23 g/mol

    Ref: 3D-IM145487

    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    250g
    Discontinued
    500g
    Discontinued
    Discontinued product
  • Fonofos

    CAS:

    Fonofos is a potent inhibitor that has been shown to induce apoptosis in Chinese hamster ovary cells. It is also known to inhibit chitin kinase, a protein that plays an important role in the biosynthesis of chitin, which is essential for the formation of cell walls in fungi and insects. Fonofos has medicinal properties and has been studied as a potential anticancer agent due to its ability to inhibit tumor growth. In vitro studies have shown that Fonofos can inhibit the growth of human cancer cells by inhibiting heparin-binding proteins. Additionally, it has been found to have inhibitory effects on several other enzymes involved in cancer development and progression. Although not approved for use in humans, Fonofos may hold promise as a therapeutic agent for the treatment of certain cancers.

    Formula:C10H15OPS2
    Purity:Min. 95%
    Molecular weight:246.3 g/mol

    Ref: 3D-AAA94422

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Monobenzyl fosaprepitant

    CAS:

    Monobenzyl fosaprepitant is a drug product that is used for research and development purposes. It is an impurity standard for the analysis of API (Active Pharmaceutical Ingredient) impurities, which are synthetic products. Monobenzyl fosaprepitant has been shown to be metabolized in vitro. The metabolism studies have shown that this compound can be hydrolyzed by esterases or glucuronidases, oxidized by cytochrome P450 enzymes, reduced by glutathione reductase, or conjugated with glucuronic acid. Monobenzyl fosaprepitant is a high-purity analytical standard and is used as a pharmacopoeia monograph material.

    Formula:C30H28F7N4O6P
    Purity:Min. 95%
    Molecular weight:704.50 g/mol

    Ref: 3D-PKB85202

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 1,5-Bis(4-pyridyl)pentane

    CAS:

    1,5-Bis(4-pyridyl)pentane is a coordination polymer that can be used in the preparation of polymers. It is bifunctional and has coordination properties. This compound is made up of two pyridine rings linked to an ethyl group via a pentane chain. The cationic form of this compound is used for the preparation of some polymers. The crystal structure for 1,5-bis(4-pyridyl)pentane was determined by X-ray crystallography and found to have a layered topology with hydrogen bonding.

    Formula:C15H18N2
    Purity:Min. 95%
    Molecular weight:226.32 g/mol

    Ref: 3D-ABA38233

    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    5g
    Discontinued
    Discontinued product
  • 3,14-Dihydroxy 14β-estra-1,3,5(10)-trien-17-one

    Controlled Product
    CAS:

    Please enquire for more information about 3,14-Dihydroxy 14β-estra-1,3,5(10)-trien-17-one including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C18H22O3
    Purity:Min. 95%
    Molecular weight:286.4 g/mol

    Ref: 3D-PAA96403

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • 1-Hydroxy carvedilol

    CAS:

    1-Hydroxycarvedilol is a drug product that is used as a standard in HPLC. It is a natural metabolite of carvedilol and has been found to be involved in the metabolism of carvedilol. The purity of 1-hydroxycarvedilol is >98%. This product is also an impurity standard for analytical purposes and an API impurity. It can also be used in metabolism studies and has CAS No. 146574-41-6.

    Formula:C24H26N2O5
    Purity:Min. 95%
    Molecular weight:422.50 g/mol

    Ref: 3D-WFA57441

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Desfluoro impurity

    CAS:

    Desfluoro impurity is a drug product that is an analytical standard for the identification of impurities in API. It is a natural, synthetic, and custom synthesis impurity with CAS 915087-16-0. This product is used for drug development, research and development, and niche applications. Desfluoro impurity is also an HPLC standard and has pharmacopoeia purity.

    Formula:C21H17F3N4O2S
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:446.45 g/mol

    Ref: 3D-ID181063

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Loperamide N-oxide

    CAS:

    Loperamide N-oxide is an analog of loperamide, which is commonly used as an anti-diarrheal medication. It has been shown to have potential anti-cancer properties by inducing apoptosis in cancer cells. Loperamide N-oxide has also been detected in urine samples from Chinese individuals, indicating its potential use as a biomarker for cancer diagnosis. This compound has been found to inhibit trypsin-like kinases, which are enzymes involved in cell division and proliferation. In addition, loperamide N-oxide has been shown to inhibit the growth of tumor cells and may have potential as a therapeutic agent for cancer treatment. However, it should be noted that rifampicin and other inhibitors can reduce the effectiveness of loperamide N-oxide against cancer cells. Further research is needed to fully understand the potential benefits and limitations of this compound.

    Formula:C29H33ClN2O3
    Purity:Min. 95%
    Molecular weight:493 g/mol

    Ref: 3D-SIA47103

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • rac-Keto labetalol

    CAS:

    Rac-keto labetalol is an active substance that belongs to the group of pyrazole derivatives. It is a racemic mixture of two enantiomers, (+)-labetalol and (-)-labetalol. Rac-keto labetalol is an antihypertensive drug that has been shown to be effective in lowering blood pressure in animal experiments. Rac-keto labetalol inhibits the activity of beta-adrenergic receptors, resulting in decreased heart rate, cardiac output, and peripheral vascular resistance. Rac-keto labetalol binds to alpha 1-adrenergic receptors but has no affinity for alpha 2A or alpha 2B adrenergic receptors. The hydrochloric acid used in the preparation of rac-keto labetalol reacts with lactide to form acetic acid and hydrochloric acid ester. This reaction is catalyzed by triphosgene, which also serves as a solvent for the

    Formula:C19H22N2O3
    Purity:Min. 95%
    Molecular weight:326.4 g/mol

    Ref: 3D-KDA66585

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Ethyl 6-[4-[(5-chloro-1-oxopentyl)amino]phenyl]-4,5,6,7-tetrahydro-1-(4-methoxyphenyl)-7-oxo-1H-pyrazolo[3,4-c]pyridine-3-carboxylat e

    CAS:

    Ethyl 6-[4-[(5-chloro-1-oxopentyl)amino]phenyl]-4,5,6,7-tetrahydro-1-(4-methoxyphenyl)-7-oxo-1H-pyrazolo[3,4-c]pyridine-3-carboxylate is a chemical compound with various applications. It is soluble in methanol and has been found to interact with peptidoglycan, cellulose, and other substances. This compound has shown potential anticoagulation properties and has been studied for its effects on blonanserin, etoricoxib, 27-hydroxycholesterol, tenofovir, proton, famotidine, dimethyl fumarate, calpain, dimethyl sulfoxide, and reactive agents. Further research is needed to fully understand the potential applications of this compound and its interactions with different substances.

    Formula:C27H29ClN4O5
    Purity:Min. 95%
    Molecular weight:525 g/mol

    Ref: 3D-WGC82320

    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    5g
    Discontinued
    Discontinued product
  • Dioctyl carbonate

    CAS:

    Dioctyl carbonate is a pharmaceutical preparation used to treat skin conditions. It is a fatty acid ester of carbonic and carbonyl groups in which the two esters are in the same molecule. Dioctyl carbonate is a reaction product obtained by reacting an inorganic acid, such as hydrochloric acid or sulfuric acid, with an alcohol containing two hydroxyl groups and one double bond. This reaction may be facilitated by heating. The film-forming polymer may be polyvinylpyrrolidone, polyvinyl alcohol, or polyacrylic acid. Dioctyl carbonate has been shown to stimulate colony-stimulating factor production and inhibit the proliferation of human epidermal keratinocytes.

    Formula:C17H34O3
    Purity:Min. 95%
    Color and Shape:Clear Liquid
    Molecular weight:286.4 g/mol

    Ref: 3D-BAA68031

    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    2g
    Discontinued
    500mg
    Discontinued
    1g
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    50g
    Discontinued
    Discontinued product
  • Imiloxan hydrochloride

    CAS:

    Imiloxan hydrochloride is a diagnostic agent that is used to diagnose Parkinson's disease and other neurological disorders. Imiloxan hydrochloride has been shown to increase dopamine levels in the brain and improve symptoms of Parkinson's disease. Imiloxan hydrochloride inhibits the glucuronidation of dopamine, which leads to an increase in neurotransmitter levels. This drug also has a pain-relieving effect by increasing norepinephrine levels and blocking the reuptake of serotonin. Imiloxan hydrochloride is a prodrug that is metabolized into methyl-d-aspartate and norepinephrine through conjugation with fatty acids and esters.

    Formula:C14H17ClN2O2
    Purity:Min. 95%
    Molecular weight:280.75 g/mol

    Ref: 3D-GDA16722

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • N-(4-Amino-6,7-dimethoxyquinazol-2-yl)-N-methylpropylenediamine formamide hydrochloride

    CAS:

    N-(4-Amino-6,7-dimethoxyquinazol-2-yl)-N-methylpropylenediamine formamide hydrochloride is an impurity in the synthesis of N-(4-amino-6,7-dimethoxyquinazol-2-yl)-N'-methylpropylenediamine formamide hydrochloride. It is a white solid that can be used as an analytical reference standard for HPLC. It has been detected in the urine of people taking this drug and can be used to identify the presence of this drug in urine samples.

    Formula:C14H17N5O2·HCl
    Purity:Min. 95%
    Molecular weight:323.78 g/mol

    Ref: 3D-IA156915

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Kaempferol di-o-methoxymethyl ether

    CAS:
    Kaempferol di-O-methoxymethyl ether is a natural product that has been identified as a metabolite of kaempferol. It is an API impurity in the drug product and can also be found in the synthesis of kaempferol. Kaempferol di-O-methoxymethyl ether is a synthetic compound that can be used for drug development, research and development, and analytical purposes. It is an HPLC standard for pharmacopoeia.
    Formula:C19H18O8
    Purity:Min. 95%
    Molecular weight:374.3 g/mol

    Ref: 3D-EDC80199

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Decladinose roxithromycin

    CAS:

    Decladinose roxithromycin is a novel drug that can be used for the diagnosis and treatment of disorders related to the mutation. Decladinose roxithromycin has been shown to be effective in the detection and treatment of mutants, such as those related to cystic fibrosis.

    Formula:C33H62N2O12
    Purity:Min. 95%
    Molecular weight:678.85 g/mol

    Ref: 3D-ID106420

    1g
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    Discontinued product
  • 11-Oxo-betamethasone-17-carboxylic acid

    Controlled Product
    CAS:

    Please enquire for more information about 11-Oxo-betamethasone-17-carboxylic acid including the price, delivery time and more detailed product information at the technical inquiry form on this page

    Formula:C21H25FO5
    Purity:Min. 95%
    Molecular weight:376.4 g/mol

    Ref: 3D-EDA57810

    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 42-o-tert-Butyldimethylsilyloxyethyl rapamycin

    CAS:
    Rapamycin is a natural product from Streptomyces hygroscopicus. It has been shown to inhibit T- and B-lymphocyte proliferation, induce apoptosis of lymphocytes, and suppress both humoral and cell-mediated immune responses. Rapamycin is also an immunosuppressant that decreases the incidence of rejection in organ transplant patients. Rapamycin is used as a drug product in the form of a sterile solution for injection. The purity of rapamycin should be at least 99%, with less than 1% impurities, such as 42-O-tert-butyldimethylsilyloxyethyl rapamycin (TBDMS). Rapamycin is not currently available on the market as an API, but it may be custom synthesized for research purposes or for clinical trials.
    Formula:C59H97NO14Si
    Purity:Min. 95%
    Molecular weight:1,072.49 g/mol

    Ref: 3D-JGA35168

    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    Discontinued product
  • (4-Chlorophenyl)[4-(1-methylethoxy)phenyl]methanone

    CAS:
    (4-Chlorophenyl)[4-(1-methylethoxy)phenyl]methanone is a drug product that is Custom synthesized to meet the requirements of pharmacopoeia, analytical, and drug development. It has been studied for its metabolism and toxicity profile in animals. This compound is a metabolite of chlorpheniramine, which is used as an antihistamine. Metabolites of this compound have also been identified in humans. The CAS Registry Number for this compound is 154356-96-4.
    Formula:C16H15ClO2
    Purity:Min. 95%
    Molecular weight:274.74 g/mol

    Ref: 3D-IC20310

    1g
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    250mg
    Discontinued
    500mg
    Discontinued
    Discontinued product
  • 1-Phenyl-1,2,3,4-tetrahydro-isoquinoline

    CAS:

    1-Phenyl-1,2,3,4-tetrahydro-isoquinoline is a synthetic compound which has been used as a lead compound for the development of drugs with dopamine β-hydroxylase inhibitory activity. In vitro studies have shown that 1-phenyl-1,2,3,4-tetrahydro-isoquinoline inhibits human serum dopamine β-hydroxylase and can be used to study the possible role of this enzyme in Parkinson's disease. This drug is racemized in the body and has been found to be effective against Parkinson's disease in rats. It is also an enantiomer that has industrial applications for the production of polyurethane foam insulation coatings.

    Formula:C15H15N
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:209.29 g/mol

    Ref: 3D-IP14816

    ne
    Discontinued
    5g
    Discontinued
    10g
    Discontinued
    25g
    Discontinued
    50g
    Discontinued
    100g
    Discontinued
    Discontinued product
  • Desmethyl dehydro lercanidipine

    CAS:

    Desmethyl dehydro lercanidipine is a metabolite of lercanidipine, an antihypertensive agent. Lercanidipine is a dihydropyridine calcium channel blocker that inhibits the influx of calcium ions into cardiac muscle cells and vascular smooth muscle cells. The desmethyl form of lercanidipine has been shown to have anti-inflammatory effects in rats with experimental arthritis. It has also been shown to inhibit the production of inflammatory cytokines in lipopolysaccharide-stimulated human peripheral blood mononuclear cells.

    Formula:C35H37N3O6
    Purity:Min. 95%
    Molecular weight:595.70 g/mol

    Ref: 3D-UUB22697

    1mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Dexamethasone Impurity A


    Impurity A is an impurity of the drug product, dexamethasone. The impurity is a natural metabolite of dexamethasone that is found in the urine of patients taking this medication. Impurity A is chemically identified using HPLC and its purity verified using GC-MS and LC-MS. This impurity can be used as a reference standard for analytical purposes and as an impurity standard for pharmacopoeia testing.

    Formula:C22H29FO5
    Purity:Min. 95 Area-%
    Color and Shape:White Off-White Powder
    Molecular weight:392.46 g/mol

    Ref: 3D-ID176574

    ne
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    25mg
    Discontinued
    Discontinued product
  • Lumiflavin 5-oxide

    CAS:

    Lumiflavin 5-oxide is a metabolite of lumiflavin. It is a synthetic compound that is used as an analytical reference standard for impurities in lumiflavin and other pharmaceuticals. Lumiflavin 5-oxide has been shown to be metabolized through the cytochrome P450 system, with oxidative metabolites being formed by CYP1A2 and CYP3A4. Lumiflavin 5-oxide has also been shown to be a competitive inhibitor of NAD+-dependent enzymes such as glycerol kinase, phosphofructokinase, lactate dehydrogenase, alcohol dehydrogenase, and glucose 6-phosphate dehydrogenase.

    Formula:C13H12N4O3
    Purity:Min. 95%
    Molecular weight:272.26 g/mol

    Ref: 3D-LBA99593

    100mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    Discontinued product
  • Gyromitrin

    CAS:

    Gyromitrin is a potent inhibitor of tumor growth and apoptosis in human cancer cells. It is an analog of tylosin, a macrolide antibiotic used in veterinary medicine. Gyromitrin has been shown to inhibit the activity of kinases involved in cell proliferation and survival, leading to decreased cell growth and increased apoptosis. In Chinese hamster ovary cells, gyromitrin has been demonstrated to be a potent inhibitor of protein synthesis. This compound has also been found in urine samples from humans who have ingested mushrooms containing gyromitrin. Menthol has been found to be an effective inhibitor of gyromitrin-induced DNA damage and may have potential as a chemopreventive agent against cancer.

    Formula:C4H8N2O
    Purity:Min. 95%
    Molecular weight:100.12 g/mol

    Ref: 3D-RAA56802

    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    50mg
    Discontinued
    100mg
    Discontinued
    Discontinued product
  • Ceftazidime impurity H

    CAS:

    Ceftazidime impurity H is a by-product that can be found in the synthesis of ceftazidime. It has been detected using magnetic separation and UV detection. Ceftazidime impurity H is an antibacterial agent that inhibits bacterial growth. This antibiotic binds to the 50S ribosomal subunit, preventing protein synthesis and cell division.

    Formula:C23H24N6O7S2
    Purity:Min. 95%
    Molecular weight:560.6 g/mol

    Ref: 3D-IC63721

    500µg
    Discontinued
    1mg
    Discontinued
    2mg
    Discontinued
    5mg
    Discontinued
    10mg
    Discontinued
    25mg
    Discontinued
    Discontinued product