Metal Salts
Found 2872 products of "Metal Salts"
4-Acetaminophen sulfate potassium salt
CAS:Acetaminophen-induced hepatotoxicity is a serious adverse effect that can occur with the use of acetaminophen. This drug is metabolized by the liver and excreted in urine as conjugates with glucuronic acid, sulfate, and glutathione. Acetaminophen-induced hepatotoxicity is a major concern for wastewater treatment plants. The potential harm to humans is determined by the plasma concentration of acetaminophen. A pharmacokinetic study was performed on human volunteers to determine the pharmacokinetics of 4-acetaminophen sulfate potassium salt following oral administration. The study found that 4-acetaminophen sulfate potassium salt has linear pharmacokinetics and an activated half-life of 6 hours. This means that it would take 6 hours for 50% of the drug to be eliminated from the body after ingestion. In addition, electrochemical impedance spectroscopy has been used to measure plasma concentrations in humans following oral administration of 4-acetaminohenFormula:C8H8KNO5SPurity:Min. 95 Area-%Color and Shape:PowderMolecular weight:269.32 g/molMicafungin sodium
CAS:Anti-fungal; glucan synthase inhibitorFormula:C56H70N9NaO23SPurity:Min. 97 Area-%Color and Shape:White PowderMolecular weight:1,292.26 g/molL-(-)-Malic acid monosodium
CAS:L-Malic acid is a dicarboxylic acid that is found in many fruits and vegetables. It is the substrate for the enzyme malate dehydrogenase, which catalyzes the oxidation of L-malate to oxaloacetate. L-Malic acid is used to study mitochondrial function, as it can be used as an alternative energy source. The L-malic acid monosodium salt (LAM) has been shown to be effective in preventing muscle damage caused by exercise. This may be due to its ability to decrease oxidative stress and increase ATP production through increased mitochondrial activity. LAM also has been shown to promote photoreceptor cell survival and improve retinal function in animals with damaged photoreceptors, although it does not have any effect on normal animal eyes.Formula:C4H6O5•NaPurity:Min. 95%Color and Shape:PowderMolecular weight:157.08 g/molResorufin sodium salt - 95%
CAS:Resorufin sodium salt is a chemical that belongs to the class of p450 inhibitors. It is a fluorescence probe that can be used in biological samples such as hypochlorous acid, detoxification enzymes, and membrane permeable. Resorufin sodium salt has been shown to inhibit the growth of Trichomonas vaginalis and other microorganisms. The fluorescence properties of resorufin sodium salt have been extensively studied and can be used for gel chromatography. The compound is soluble in water, which makes it an excellent choice for use in biological experiments.Formula:C12H6NNaO3Purity:Min. 95 Area-%Color and Shape:Brown Purple PowderMolecular weight:235.17 g/mol5-Methyl-[1,3,4]oxadiazole-2-carboxylic acid, potassium salt
CAS:5-Methyl-[1,3,4]oxadiazole-2-carboxylic acid, potassium salt (5-MOC) is a multistage laser treatment that can be used to treat pigmentation. 5-MOC inhibits the production of melanin in the skin by inhibiting tyrosinase activity. This drug also has been shown to reduce hyperpigmentation by reducing the number of pigment cells. 5-MOC is delivered using an electron microscopic technique and is packaged in a capsule for oral administration. The colorimeter sensor detects the amount of light reflected from the skin surface and converts it into a color value. The sensor measures the amount of light that reflects back from areas with pigmentation problems and determines whether or not they are treated correctly.Formula:C4H3N2O3·KPurity:Min. 95%Color and Shape:PowderMolecular weight:166.18 g/molDiiodo(bis(diphenylphosphino)ethane)cobalt(II)
CAS:Diiodo(bis(diphenylphosphino)ethane)cobalt(II) is a chiral catalyst that is used in the synthesis of organic molecules. It can be used in reactions with halides and iodides, although it is not effective for reactions with alkynes or alkyl halides. It has been shown to be especially effective for reactions that involve zinc powder, such as cinnamyl aldehydes, acetonitrile, and ligands. Diiodo(bis(diphenylphosphino)ethane)cobalt(II) is reactive and stable at high temperatures and works well under argon conditions.
Formula:C26H24CoI2P2Purity:Min. 95%Color and Shape:PowderMolecular weight:711.16 g/molDirect Red 16
CAS:Direct Red 16 is a dye that reacts with acids to form an intensely red compound. It is used in research and as a reagent for the production of other dyes. Direct Red 16 is also used as a building block in the synthesis of complex molecules, such as pharmaceuticals and dyes.Formula:C26H17N5Na2O8S2Purity:Min. 95%Molecular weight:639.57 g/molLosartan potassium
CAS:Non-peptide angiotensin AT1 receptor antagonist; anti-hypertensiveFormula:C22H22ClKN6OPurity:Min. 95%Color and Shape:White PowderMolecular weight:461 g/molCyclopentadienyldicarbonyl(tetrahydrofuran)iron(II) tetrafluoroborate
CAS:Cyclopentadienyldicarbonyl(tetrahydrofuran)iron(II) tetrafluoroborate is a chemical that is used as a building block in research and speciality chemical synthesis. The compound has been shown to be versatile, with many possible reactions, including the formation of a complex. This compound can also be used as an intermediate for another chemical or as a scaffold for other compounds. Cyclopentadienyldicarbonyl(tetrahydrofuran)iron(II) tetrafluoroborate is a high quality reagent that can be used in reaction processes with low toxicity.Formula:C11H13FeO3•BF4Purity:Min. 95%Color and Shape:SolidMolecular weight:335.87 g/molBis(8-quinolinolato)zinc(II)
CAS:Bis(8-quinolinolato)zinc (II) is a molecule that contains carboxylate groups. It has been shown to be processable and can be used in fabrication processes. Bis(8-quinolinolato)zinc (II) also exhibits optical properties. The metal ion in the molecule is able to form complexes with other metals, which may affect transport properties, ionization mass and morphology of the compound. It can also be used for magnetic resonance spectroscopy studies, as well as plasma mass spectrometry.
Formula:C18H12N2O2ZnPurity:Min. 95%Color and Shape:PowderMolecular weight:353.7 g/molCopper(II) chloride
CAS:Copper chloride is a chemical compound that is formed when copper and chlorine react together. It can be used to catalyze the reaction of coumarin derivatives with water vapor, forming a solution of copper(II) chloride. This solution has a higher water permeability than copper(I) chloride, which is due to its coordination geometry. Copper chloride has been shown to have biological properties that are similar to those of copper (e.g., redox potentials). It also binds to and inhibits drug metabolism enzymes such as cytochrome P450 reductase, thereby preventing the conversion of prodrugs into active metabolites.Formula:CuCl2Purity:Min. 95%Color and Shape:PowderMolecular weight:134.45 g/molCalcium bis[monoethyl(3,5-di-tert-butyl-4-hydroxylbenzyl)phosphonate]
CAS:Calcium bis[monoethyl(3,5-di-tert-butyl-4-hydroxylbenzyl)phosphonate] is a versatile building block that can be used as a reagent in organic syntheses. It is a useful scaffold in the preparation of complex compounds and fine chemicals. The CAS Registry Number for this compound is 65140-91-2.Formula:C34H56CaO8P2Purity:Min. 95%Color and Shape:White Off-White PowderMolecular weight:694.8 g/molIron(III) sulfate
CAS:Iron(III) sulfate is a chemical compound that is widely used in the water treatment industry. It is usually used to remove dissolved iron from water, which can cause staining and unwanted odors. The optimum concentration of Iron(III) sulfate for wastewater treatment ranges from 0.2 to 1.0 milligrams per liter (mg/L). This chemical has been shown to form adducts with alkanoic acids and coumarin derivatives, which are important in the reaction mechanism of this compound. Thermodynamic data indicate that Iron(III) sulfate does not have any carcinogenic potential or particle formation properties. Iron(III) sulfate reacts with other chemicals to produce sulfur dioxide gas and hydrogen sulfide gas, which are acidic compounds with a redox potential of -0.6 volts.
Formula:Fe2O12S3Color and Shape:PowderMolecular weight:405.93 g/mol2,4-Dihydroxybutanoic acid calcium
2,4-Dihydroxybutanoic acid calcium is a versatile building block that can be used as a reagent or speciality chemical in research. It has many uses as a building block for complex compounds, such as pharmaceuticals and agrochemicals. 2,4-Dihydroxybutanoic acid calcium is also an important intermediate for reactions to produce useful scaffolds. This product is of high quality and can be used in many applications.Formula:(C4H7O4)2•CaPurity:(¹H-Nmr) Min. 95 Area-%Color and Shape:White PowderMolecular weight:278.27 g/molPotassium acetate
CAS:Potassium acetate is a chemical compound that contains the element potassium. It is a white, water-soluble solid that can be found in many household items such as fertilizers and soaps. Potassium acetate is used as an electrolyte in biological samples because it has a high redox potential and can be easily detected by various analytical methods. The concentration of potassium acetate in biological samples can be determined by measuring the absorbance at 550 nm. This test is useful for determining the level of potassium in blood plasma or serum, which are often used as indicators of kidney function or heart disease. Potassium acetate has been shown to have anti-inflammatory effects and may be beneficial for people with alopecia areata or autoimmune diseases such as rheumatoid arthritis, psoriasis, or lupus. Potassium acetate may also have some benefits for people with fatty acid metabolism disorders or who need calcium pantothenate treatment due to vitamin B deficiency.Formula:C2H3KO2Color and Shape:PowderMolecular weight:98.14 g/molTris(4,7-diphenyl-1,10-phenanthroline)ruthenium bis(hexafluorophosphate)
CAS:Tris(4,7-diphenyl-1,10-phenanthroline)ruthenium bis(hexafluorophosphate) is a fluorescent dye that can be used to measure oxygen concentration. It has been shown to inhibit the transfer of oxygen at low concentrations. Tris(4,7-diphenyl-1,10-phenanthroline)ruthenium bis(hexafluorophosphate) is used as a calibration standard for the measurement of oxygen concentration in liquids by fluorescence.Formula:C72H48N6Ru·2F6PPurity:(¹H-Nmr) Min. 95 Area-%Color and Shape:Orange PowderMolecular weight:1,388.19 g/mol1,2-Naphthoquinone-4-sulfonic acid sodium salt
CAS:1,2-Naphthoquinone-4-sulfonic acid sodium salt is a fluorescent probe that reacts with the hydroxyl groups of amino acids and proteins. It has been used to measure glucose levels by injecting it into a living organism and examining the fluorescence emitted in response to an excitation wavelength. The redox potential of this molecule is -0.29 volts, which indicates that it is nucleophilic. 1,2-Naphthoquinone-4-sulfonic acid sodium salt can be used as a dye for labeling amines and other compounds with strong electron withdrawing groups. This compound is often used as a reagent in the synthesis of pharmaceutical preparations such as ceftriaxone. 1,2-Naphthoquinone-4-sulfonic acid sodium salt also reacts with hydrochloric acid to produce amines such as benzeneamine or ethylamine.Formula:C10H5O5S·NaPurity:Min. 98 Area-%Color and Shape:Yellow PowderMolecular weight:260.2 g/molChromium dioxide
CAS:Chromium dioxide is a magnetic material that can be used in devices such as hard disks and magnetic tapes. It has been shown to have anisotropic properties, which depend on the method of preparation. Chromium dioxide has been used experimentally to produce polyelectrolytes with specialized functional groups, including carboxylates and amines, for use in techniques such as electrospinning. The electron spin resonance (ESR) technique is commonly used to characterize the magnetic properties of chromium dioxide. This material has also been used to make organic-inorganic hybrid materials that are useful in organic solvent extraction processes.
Formula:CrO2Purity:Min. 98%Color and Shape:PowderMolecular weight:83.99 g/molCasein sodium
CAS:Casein is a protein found in milk that has inhibitory properties against Listeria monocytogenes. It has been shown to have an inhibitory effect when used in microcapsules and can be used to prevent the growth of bacteria such as lactobacillus acidophilus. Casein may also have an effect on the production of vitamin B12. The encapsulation process helps protect the casein from being broken down by water vapor and emulsions, which are substances that keep it from becoming diluted in humidities. The growth rate of populations can be slowed by using casein due to its effects on proteins, specifically concentrations. Casein also affects populations through its effects on stator proteins.Color and Shape:PowderPemetrexed disodium
CAS:Thymidylate synthase inhibitor; antifolate antineoplastic agentFormula:C20H19N5Na2O6Purity:Min. 95%Color and Shape:White PowderMolecular weight:471.37 g/molGlycochenodeoxycholic acid sodium salt
CAS:Glycochenodeoxycholic acid sodium salt is a bile acid derivative, which is an important component of the bile produced in the liver. It originates from the metabolism and conjugation of chenodeoxycholic acid with glycine, a process that occurs in the liver. This compound plays a significant role in the emulsification and solubilization of dietary fats, which facilitates their absorption in the intestines.Formula:C26H42NNaO5Purity:Min. 96 Area-%Color and Shape:White Off-White PowderMolecular weight:471.61 g/molLactobionic acid sodium salt monohydrate
CAS:Lactobionic acid is a white, crystalline powder with a molecular weight of 278.3 g/mol. It is an organic compound that is used as a reactant in organic synthesis, as a reagent for the determination of iron and calcium in biological samples, and as an intermediate in the production of polyesters. Lactobionic acid can be used to synthesize polyester materials with high molecular weights and high purity. The compound has been shown to have anti-inflammatory properties, which may be due to its inhibition of prostaglandin synthesis.Formula:C12H21NaO12·H2OPurity:Min. 95%Color and Shape:PowderMolecular weight:398.3 g/molLead(IV) acetate - Stabilized with acetic acid (5-10%)
CAS:Lead acetate is an alkanoic acid that can be used as a lead salt. It has been shown to react with protocatechuic acid in the presence of hydrogen to form lead(IV) protocatechuate and acetic acid. This reaction mechanism can be applied to the analysis of other organic acids, such as fatty acids. Lead acetate also inhibits protease activity in vitro and has been shown to have therapeutic effects against autoimmune diseases and polycystic ovarian syndrome. Lead acetate has a low toxicity and is stable when mixed with trifluoroacetic acid or nitro compounds, but very reactive with strong oxidizing agents such as hydrochloric acid or hydrogen fluoride. Lead acetate is non-hygroscopic and insoluble in water, making it suitable for use in analytical chemistry.Formula:C8H12O8PbPurity:Min. 95%Color and Shape:White PowderMolecular weight:443.38 g/molBAPTA tetracesium
CAS:Please enquire for more information about BAPTA tetracesium including the price, delivery time and more detailed product information at the technical inquiry form on this pageFormula:C22H24N2O10•Cs4Purity:Min. 95%Color and Shape:PowderMolecular weight:1,008.06 g/molAmoxicillin sodium
CAS:Amoxicillin sodium is a penicillin antibiotic that inhibits bacterial cell wall synthesis. It is active against Gram-positive bacteria, such as Bacillus anthracis, Enterococcus faecalis, and Staphylococcus aureus. Amoxicillin sodium also inhibits the growth of Gram-negative bacteria, such as Salmonella typhi. It is used to treat a wide variety of infectious diseases caused by bacteria and protozoa, including respiratory tract infections, skin infections, urinary tract infections, gastrointestinal infections, ear infections, gonorrhea and syphilis. Amoxicillin sodium has been shown to have a good chemical stability in the presence of potassium ions and can be mixed with sulbactam or clavulanate potassium for enhanced efficacy in patients with high resistance to amoxicillin. The injection solution should be given intravenously with magnesium salt after glucose injection to increase blood levels of amoxicillin.Formula:C16H18N3NaO5SPurity:Min. 95 Area-%Color and Shape:PowderMolecular weight:387.39 g/molIron(III) acetylacetonate
CAS:Iron(III) acetylacetonate is an activated form of iron, which has been shown to be effective in the treatment of wastewater. This compound is highly reactive with organic compounds and human pathogens. Iron(III) acetylacetonate can be used as a catalyst in organic reactions, such as the oxidation of alcohols, and also has antimicrobial properties. Iron(III) acetylacetonate activates by reacting with water, forming FeO and HO molecules. The reaction mechanism for this compound is similar to that of other organometallic compounds. Iron(III) acetylacetonate has a coordination geometry around the central iron atom, which is octahedral. The activation energies for this compound are lower than those for iron oxides or other particle materials.Formula:C15H21FeO6Purity:Min. 95%Color and Shape:Red Clear LiquidMolecular weight:353.17 g/molDexamethasone sodium phosphate
CAS:Dexamethasone sodium phosphate is a water-soluble glucocorticosteroid used in the treatment of inflammation and pain. In a rabbit model, the inclusion of dexamethasone sodium phosphate into liposomes has improved its delivery to the eye compartments (Al-Muhammed, 1996). To improve the acceptability by paediatric patients, dexamethasone sodium phosphate has been tested in formulations with sweeteners and chocolate (Synaridou, 2020). A pollutant of hospital wastewater, dexamethasone sodium phosphate is degraded by Pseudomonas alcaligenes during bioremediation (Yi, 2014).
Formula:C22H28FO8P•Na2Purity:Min. 97 Area-%Color and Shape:PowderMolecular weight:516.41 g/molPotassium salicylate
CAS:Potassium salicylate is an organic compound that is used as an antimicrobial agent. It has a hydroxyl group and a double bond between the carbonyl carbon and one of the hydroxyl groups. Potassium salicylate has been shown to have broad-spectrum antibacterial activity against a variety of bacteria, including gram-positive bacteria (e.g., Staphylococcus aureus). This compound also has light-emitting properties, which may be due to its intramolecular hydrogen transfer from the hydroxyl group to the ester hydrochloride. The reaction solution turns orange in color when potassium salicylate is added to it. Potassium salicylate can react with calcium pantothenate in an ester linkage, producing p-hydroxybenzoic acid and acetoacetic acid.Formula:C7H6O3•KPurity:Min. 95%Color and Shape:PowderMolecular weight:177.22 g/mol1,1'-Dichloroferrocene
CAS:1,1'-Dichloroferrocene is a molecule that belongs to the group of benzenes and has a gaseous form. It has potential energy and is an optical active compound. 1,1'-Dichloroferrin can be found in synchrotron radiation and it's optical absorption is dipole. The ligand for 1,1'-dichloroferrocene is ferrocene. This molecule transfers energy through radiation and optical excitation. The parameters for bromoferrocene are similar to those of 1,1'-dichloroferrin except that it does not have the same steric properties.Formula:C10H8Cl2FePurity:Min. 95%Color and Shape:Off-White To Dark Yellow SolidMolecular weight:254.92 g/molTandospirone
CAS:Tandospirone is a psychotropic drug that acts as a selective serotonin receptor partial agonist. It is derived from a synthetic source, specifically targeting the 5-HT1A receptors in the brain. Tandospirone modulates serotonergic neurotransmission by binding to these receptors, which are associated with mood regulation. This action results in the anxiolytic and antidepressant effects observed with the drug.Formula:C21H29N5O2Purity:Min. 95%Molecular weight:383.49 g/molSodium hexametaphosphate
CAS:Sodium hexametaphosphate is a useful biochemical for surface methodology. It is an anhydrous compound that contains sodium and hexametaphosphoric acid. Sodium hexametaphosphate can be used as a substrate for films of polymers, such as polyacrylamide, polyvinylpyrrolidone, and polymethacrylate. It has been shown to have ionotropic gelation properties in the presence of benzalkonium chloride and cell lysis properties in the presence of calcium ions. Sodium hexametaphosphate has also been shown to induce water vapor adsorption onto proteins at low humidities.Formula:(NaPO3)nPurity:Min. 95%Color and Shape:PowderOmeprazole sodium salt hydrate
CAS:Proton pump inhibitor; irreversible blocker of P-type H+/K+ ATPaseFormula:C17H18N3O3S•Na•xH2OPurity:Min. 95%Color and Shape:PowderMolecular weight:367.41 g/molPotassium DL- lactate
CAS:Potassium DL-lactate is a salt of the organic compound L-lactic acid and potassium. It has been shown to have antimicrobial effects against a variety of bacteria, including monocytogenes. The mechanism of action appears to be related to the disruption of ATP levels and inhibition of protein synthesis. It also increases the pH in an acidic environment, which may make it an effective treatment for infections caused by Gram-negative bacteria such as E. coli or Pseudomonas aeruginosa. Potassium DL-lactate can be used in combination with sodium citrate and has been shown to reduce bacterial growth on metal surfaces. It is also known to have surface activity against Gram-positive bacteria such as S. aureus.Formula:C3H6O3•KPurity:Min. 95%Color and Shape:Clear LiquidMolecular weight:129.18 g/molTitanium(IV) Chloride - (14% in Dichloromethane, ca. 1.0mol/L)
CAS:Titanium chloride is a chemical compound with the formula TiCl4. It is soluble in many organic solvents, and it reacts with water to form an acidic solution of hydrochloric acid. Titanium chloride is used as a catalyst for the synthesis of polymers such as poly(trifluoroethylene) and poly(vinyl chloride). This compound also has been used in clinical studies to treat chronic bronchitis. The reaction mechanism of titanium chloride is not clear, but it has been suggested that it may involve a Friedel-Crafts type reaction or an electrochemical process. The transport properties of titanium chloride are not well studied, but fluorescence spectrometry indicates that the molecule contains cationic moieties and carbonyl groups. Titanium chloride can be synthesized by a two-step process: first, iron oxide (FeO) is reacted with trifluoroacetic acid (TFA), followed by addition of TiCl4. The coordination geometry around titaniumFormula:TiCl4Purity:Min. 95%Color and Shape:Colorless PowderMolecular weight:189.68 g/molSodium tanshinone IIA sulfonate
CAS:Sodium tanshinone IIA sulfonate is a potent cardiotonic agent and antioxidant. It is prepared by the reaction of sodium tanshinone with sulfonic acid, followed by purification using preparative high-performance liquid chromatography (HPLC). Sodium tanshinone IIA sulfonate has significant cytotoxicity against various tumor cells in culture. It inhibits mitochondrial membrane potential and polymerase chain reaction (PCR) activity, as well as DNA synthesis. The optimum concentration of sodium tanshinone IIA sulfonate for cardiotonic activity is 0.1 mM. This drug also has a positive effect on glucose metabolism and can prevent myocardial infarction in experimental models.Formula:C19H17NaO6SPurity:Min. 95%Color and Shape:PowderMolecular weight:396.39 g/molPatent Blue V sodium salt
CAS:C.I. Acid Blue 3 is a synthetic, water-soluble dye that has been used in analytical chemistry for the detection of metal hydroxides and other metal ions. The dye can be activated by radiation or by heating to produce a bright blue color that is stable under acidic conditions. C.I. Acid Blue 3 has been shown to cause toxicity in animals, and may have potential carcinogenic effects in humans due to its ability to cross the blood-brain barrier and accumulate in the brain. The molecular weight of this compound is approximately 464 g/mol and it has a molecular formula of C 18 H 20 N 2 NaO 7 S 2 .
Formula:C27H32N2O7S2•xNaColor and Shape:Blue PowderMolecular weight:582.67 g/molSodium acetate anhydrous
CAS:Sodium acetate anhydrous is a salt of sodium and acetic acid. It is a white crystalline solid that can be obtained by reacting sodium hydroxide with acetic acid. This material is used as the buffer in analytical methods to maintain pH levels during chemical reactions. The addition of this salt to solution will cause the solution to have a higher boiling point, which can be used for phase transition temperature measurements. Injection solutions containing this salt are also used for injection into humans. Sodium acetate anhydrous has been shown to have covalent linkages when it reacts with DNA and ATP, which may be related to its ability to inhibit mitochondrial membrane potential and disrupt energy metabolism.
Formula:C2H4O2•NaPurity:Min. 95%Color and Shape:PowderMolecular weight:82.03 g/molSodium carbonate monohydrate
CAS:Controlled ProductSodium carbonate monohydrate is a versatile chemical that can be used as a building block in the synthesis of complex compounds. It is also used as an intermediate in the production of research chemicals or as a reagent. Sodium carbonate monohydrate has high quality and is useful in many reactions. This compound can be used to make various scaffolds, which are structures that provide stability for molecules or atoms during a reaction.Formula:Na2CO3·H2OPurity:Min. 95%Color and Shape:PowderMolecular weight:124 g/molChromotropic acid disodium dihydrate
CAS:Chromotropic acid dihydrate is a chromogenic compound that has an adsorption mechanism and is used as an analytical reagent. Chromotropic acid disodium dihydrate (CDA) is used in the determination of hydrochloric acid, natural gas and other liquids. It also can be used to measure the concentration of tyramine hydrochloride. CDA has been shown to be effective in the measurement of molecular orbitals and kinetic constants. The optical sensor is sensitive to wavelengths ranging from 200-900 nm, with a peak absorption at around 500 nm. This sensor can be used for many types of chemical reactions, such as organic synthesis, hydrogenation, and oxidation.Formula:C10H6O8S2Na2·2H2OPurity:Min. 95%Color and Shape:Off-White PowderMolecular weight:400.29 g/mol4-Aminobenzoic acid sodium salt
CAS:4-Aminobenzoic acid sodium salt is an aminobenzoic acid that is used as a pharmaceutical intermediate. It is soluble in water and alcohol and has a pH of 4.5. The compound has been shown to inhibit the growth of bacteria by binding to enzymes involved in fatty acid synthesis, which prevents the formation of fatty acids and results in cell death. The compound also inhibits allergic reactions through its inhibition of histamine release from mast cells. 4-Aminobenzoic acid sodium salt has been found to have anti-inflammatory properties, which may be due to its ability to bind to epidermal growth factor receptors on the surface of keratinocytes, leading to increased cell proliferation and less inflammation.Formula:C7H6NO2NaPurity:Min. 95%Color and Shape:PowderMolecular weight:159.12 g/molZinc ricinoleate
CAS:Zinc ricinoleate is a metal compound that is an absorber of hydrogen. It is primarily used as a deodorant for cosmetics and is often found in deodorant creams, powders, gels, and sticks. Zinc ricinoleate has been shown to be effective against lipases and chloride-containing compounds. The metal ion zinc in this compound reacts with the fatty acid esters in the skin and forms a protective layer that prevents the skin from becoming dry or irritated. Zinc ricinoleate also inhibits bacterial growth by preventing the synthesis of proteins needed for cell division.Formula:C36H66O6ZnPurity:Min. 95%Color and Shape:PowderMolecular weight:660.29 g/mol[1,1'-Bis(diphenylphosphino)ferrocene]-dichloropalladium (II)
CAS:Controlled Product[1,1'-Bis(diphenylphosphino)ferrocene]-dichloropalladium (II) is a catalyst used in cross-coupling reactions. It has been shown to be an efficient catalyst for the synthesis of substituted benzene derivatives. The presence of substituents on the benzene ring influences its reactivity and selectivity with respect to other substrates. In addition, it can be used as a photochemical source of ferrocenium ions, which are useful intermediates in organic synthesis. This compound is also used to simulate the reaction mechanisms of thiophene and triazine compounds.Formula:C34H28Cl2FeP2PdPurity:Min. 95%Color and Shape:Red PowderMolecular weight:731.7 g/molHydrocortisone hemisuccinate sodium
CAS:Controlled ProductHydrocortisone is a hormone involved in the regulation of the immune system and inflammatory response. It is used to treat inflammation, bowel disease, metabolic disorders, and autoimmune diseases. Hydrocortisone has been shown to affect cell nucleus activity and blood sampling in vitro. This drug can also be administered orally or topically to treat skin conditions such as erythropoietic protoporphyria (EPP) or psoriasis. Hydrocortisone hemisuccinate sodium is a drug that contains hydrocortisone and sodium salt. The salt form of hydrocortisone hemisuccinate sodium has been shown to have an anti-inflammatory effect when injected subcutaneously into rats with experimental colitis.Formula:C25H33NaO8Purity:Min. 95%Color and Shape:White PowderMolecular weight:484.51 g/molSodium phosphate dibasic
CAS:Sodium phosphate dibasic is a chemical compound that contains sodium and phosphate ions. It is soluble in water and can be found as a white powder or granules. This product is used to prepare reaction solutions for the analysis of citric acid, sodium citrate, and water vapor. Sodium phosphate dibasic has a phase transition temperature of about 100°C. The control analysis on human serum showed that there was no interference from fatty acids or sodium salts.Formula:HPO4Na2Purity:Min. 95%Color and Shape:PowderMolecular weight:141.96 g/molZinc(II) acetylacetonate hydrate
CAS:Zinc(II) acetylacetonate hydrate is a coordination compound of zinc, which has two acetylacetonate anions bound to the zinc ion. The compound has shown to inhibit the growth of epidermal cells in vitro by binding to epidermal growth factor. Zinc(II) acetylacetonate hydrate is soluble in water and can be used as a treatment for autoimmune diseases such as rheumatoid arthritis. The reaction solution is activated by heat or light energy and can be used to remove organic matter from wastewater. In addition, this compound may show promise for use in the manufacture of zirconium oxide because it has been found to have a low melting point and high crystallinity. This material also has been shown to have good catalytic activity and stability under harsh conditions.Formula:Zn(C5H7O2)2•(H2O)xPurity:Min. 95%Color and Shape:White PowderMolecular weight:263.6 g/molCalcium glycinate monohydrate
CAS:Calcium glycinate monohydrate is a chelated form of calcium that is easily absorbed by the body. It is often used in health care products, such as dietary supplements and nutritional solutions. Calcium glycinate monohydrate is used to prevent or treat calcium deficiency, which can lead to conditions such as osteoporosis. This compound also helps regulate blood pressure and muscle contractions, and may be beneficial for people with celiac disease. Calcium glycinate monohydrate has been shown to have antimicrobial properties against bacteria, fungi, and yeast.Formula:C4H8N2O4Ca•H2OColor and Shape:PowderMolecular weight:188.2 g/molTriphenylphosphine-3,3',3''-trisulfonic acid trisodium salt
CAS:Triphenylphosphine-3,3',3''-trisulfonic acid trisodium salt is a cationic surfactant that has been used as a catalyst in organic synthesis. This drug has been shown to be effective in the treatment of hydrochloric acid and sodium carbonate bladder stones. It has also been used to treat orthoboric acid nephropathy, which is a type of kidney disease caused by exposure to high levels of boric acid. Triphenylphosphine-3,3',3''-trisulfonic acid trisodium salt is not readily absorbed into the bloodstream and exhibits low bioavailability.Formula:C18H12Na3O9PS3Purity:Min. 90 Area-%Color and Shape:White PowderMolecular weight:568.42 g/molBathocuproine disulfonic acid disodium salt hydrate
CAS:Bathocuproine disulfonic acid disodium salt hydrate is a copper complex that can be used for the analysis of urine samples. It is a multicellular animal-specific enzyme inhibitor that binds to phosphatase, which is an important component in the metabolism of carbohydrates and proteins. Bathocuproine disulfonic acid disodium salt hydrate inhibits the activity of this enzyme by forming a stable copper complex, thereby preventing the hydrolysis of phosphoric esters. Bathocuproine disulfonic acid disodium salt hydrate has been shown to inhibit growth factor activity in human serum, while inhibiting the reaction vessel corrosion process. This compound also contains functional groups such as sulfonic acid, carboxylate and sulfonamide groups.Formula:C26H18N2Na2O6S2·xH2OPurity:Min. 95%Color and Shape:White PowderMolecular weight:584.57 g/molSodium cocoyl glycinate
CAS:Sodium cocoyl glycinate is a surfactant that is derived from coco-amidopropyl betaine. It has milder skin-irritating properties than sodium lauryl sulfate, and is used as a cleansing agent in cosmetic products. Sodium cocoyl glycinate can be used as a surface active agent for the treatment of malignant brain tumors and collagen for the treatment of burns. The acyl chain of this compound can be synthesized by trimethylacetic acid with an ethylene diamine catalyst. Usnic acid or fatty acids are often added to produce the desired product.Purity:Min. 95%Color and Shape:PowderN-(Hydroxymethyl)-glycine sodium - 50%, in water
CAS:N-(Hydroxymethyl)-glycine sodium salt is a fixative agent that can be used for the preservation of biological samples. It has been shown to prevent bacterial growth and maintain chemical stability in the presence of benzalkonium chloride, which is an antibacterial agent. The activity index of N-(Hydroxymethyl)-glycine sodium salt is 50%, and it is active against bacteria such as Staphylococcus aureus, Escherichia coli, and Salmonella enterica. N-(Hydroxymethyl)-glycine sodium salt also has antimicrobial properties and has been shown to be effective against Mycobacterium tuberculosis, Mycobacterium avium complex, and Candida albicans. This fixative solution should not be used on tissues from patients with diabetic neuropathy or sclera due to its high osmolarity.Formula:C3H6NNaO3Purity:Min. 95%Color and Shape:Clear LiquidMolecular weight:127.07 g/molFerroceneboronic acid
CAS:Ferroceneboronic acid is a reagent, complex compound, useful intermediate, fine chemical and useful scaffold. It is also a versatile building block for the synthesis of speciality chemicals. Ferroceneboronic acid reacts with an organic halide to form a ferrocenyl-containing boronate ester that is useful as a reaction component in organic synthesis. The CAS number for ferroceneboronic acid is 12152-94-2.Formula:C5H6BO2·C5H5·FePurity:Min. 95 Area-%Color and Shape:PowderMolecular weight:229.85 g/molCalcium chloride anhydrous
CAS:Calcium chloride anhydrous is a buffering agent that is used to control the pH of fluids in a controlled manner. It is also used as an osmotic agent in cell culture, where it regulates the uptake of water by increasing the permeability of cells. Calcium chloride anhydrous can be used to induce pluripotent cells, which are stem cells capable of becoming any type of tissue, through transcriptional regulation. This compound has been shown to have a concentration optimum at 1-3 mM and cannot be dissolved in water at high concentrations due to its hydrophilic nature. Calcium chloride anhydrous is not soluble in water and should be dissolved before being added to solutions.Formula:CaCl2Purity:Min. 95%Color and Shape:White Clear LiquidMolecular weight:110.98 g/molPotassium clavulanate - 1:1 mixture with silicon dioxide
CAS:Potassium clavulanate is a beta-lactamase inhibitor that is used in the treatment of bacterial infections. The active site of potassium clavulanate is the beta-lactam ring, which has an ester bond to the 4-hydroxyl group of the penicillin nucleus. This bond can be hydrolyzed by beta-lactamase, an enzyme produced by bacteria, which will render the antibiotic ineffective. Potassium clavulanate inhibits this enzyme by binding to it and preventing it from breaking down penicillin. The temperature range for potassium clavulanate is between 2°C and 30°C, and its UV spectrophotometric technique ranges from 220 nm to 350 nm.Formula:C8H8NO5·KPurity:Min. 95%Color and Shape:White PowderMolecular weight:237.25 g/mol(±)-a-Tocopherol phosphate disodium salt
CAS:(±)-a-Tocopherol phosphate disodium salt is a synthetic form of vitamin E and is used in skin care products and supplements. Like vitamin E it has antioxidant properties.Formula:C29H49Na2O5PPurity:Min 97%Color and Shape:PowderMolecular weight:554.66 g/molL-Malic acid disodium salt monohydrate
CAS:L-Malic acid disodium salt monohydrate is a versatile building block that can be used in the production of research chemicals, reagents and speciality chemicals. It is also a useful building block for the synthesis of complex compounds with high quality. L-Malic acid disodium salt monohydrate has been used as a reagent in organic syntheses, as well as in the production of pharmaceuticals. In addition, it is an intermediate for the synthesis of polymers and other materials. The CAS number for L-Malic acid disodium salt monohydrate is 207511-06-6.Formula:C4H4O5Na2·H2OPurity:Min. 95%Color and Shape:PowderMolecular weight:196.07 g/molSodium phytate hydrate
CAS:Chelator of multivalent metal ions; food perservative; antioxidant
Formula:C6H6Na12O24P6·xH2OPurity:Min. 75.0%Color and Shape:White PowderMolecular weight:923.82 g/molBis(1,5-cyclooctadiene)rhodium(I) trifluoromethanesulfonate
CAS:Bis(1,5-cyclooctadiene)rhodium(I) trifluoromethanesulfonate is a fine chemical that is used as a reagent for organic synthesis. It has been shown to be useful in the preparation of diverse compounds, including pharmaceuticals and agrochemicals. Bis(1,5-cyclooctadiene)rhodium(I) trifluoromethanesulfonate may also be used as a reaction component or building block for the synthesis of more complex compounds. This compound can be used to form a variety of scaffolds with different functional groups and has been found to be an effective intermediate in reactions involving palladium catalysts.
Formula:C17H24F3O3RhSPurity:Min. 95%Color and Shape:Red PowderMolecular weight:468.34 g/molSodium iodide
CAS:Sodium iodide is a substrate for film, which is used to separate proteins by their size. It can be used in the polymerase chain reaction (PCR) to amplify DNA from samples that are not amenable to gel electrophoresis. Sodium iodide can be used as a basic protein or light signal to indicate the presence of oxidative injury in cells. It has been shown to have potent antitumor activity and has been used as an analytical method for radiation and nuclear DNA. Sodium iodide can also be used as a biological sample for carcinoma cell lines.Formula:NaIPurity:Min. 95%Color and Shape:PowderMolecular weight:149.89 g/molDisodium fumarate
CAS:Disodium fumarate is a sodium salt that is used to treat bowel disease and as a nutritional supplement. It can be injected into the body or taken orally. Disodium fumarate functions as an energy metabolism regulator and also prevents copper from being absorbed by the body. This drug has been used in isotonic solutions to regulate cellular pH. Disodium fumarate is available in oral form, injection solution, or tablet form. The anion of disodium fumarate is Fumaric acid, which is found in the genus Fumaricae. The reaction between ammonium and disodium fumarate yields ammonium bisulfate.Formula:C4H2Na2O4Color and Shape:PowderMolecular weight:160.04 g/mol1,2,4-Thiadiazolidine-3,5-dithione barium
CAS:1,2,4-Thiadiazolidine-3,5-dithione barium is a chemical building block that can be used in the synthesis of other compounds. It has been used as a reagent for research and as a speciality chemical. 1,2,4-Thiadiazolidine-3,5-dithione barium is soluble in organic solvents and is stable against heat. It can be used as an intermediate for complex compounds or as a scaffold for organic synthesis. CAS No. 82585-24-8Formula:C2H2S3N2•BaPurity:Min. 95%Color and Shape:PowderMolecular weight:287.57 g/molTipranavir disodium
CAS:Anti-viral; HIV protease inhibitorFormula:C31H31F3N2Na2O5SPurity:Min. 95%Molecular weight:646.63 g/molLignosulfonic acid sodium salt
CAS:Lignosulfonic acid sodium salt is a water-soluble sodium salt of lignosulfonic acid. Lignosulfonic acid sodium salt has high water permeability and is an antimicrobial agent that can be used as a nutrient solution to remove phosphorus from wastewater. It has been shown to have hydrophobic effects in the Langmuir adsorption isotherm, which may be due to its low surface tension and large contact angle. Lignosulfonic acid sodium salt was also found to be chemically stable and showed no significant change in the chemical structure after being subjected to electrochemical impedance spectroscopy.Formula:C20H24Na2O10S2Color and Shape:PowderMolecular weight:534.51 g/molN-Ethyl-N-(2-hydroxy-3-sulfopropyl)-3,5-dimethylaniline sodium monohydrate
CAS:N-Ethyl-N-(2-hydroxy-3-sulfopropyl)-3,5-dimethylaniline (NAHSDMA) is a coumarin derivative that inhibits protein synthesis and necrotic cell death. NAHSDMA was found to inhibit the growth of colorectal adenocarcinoma cells in culture and has been shown to have anti-inflammatory properties. NAHSDMA binds to the amine group of monoamine neurotransmitters, which are vital for brain function. This drug also has antimicrobial properties, inhibiting bacterial growth by binding to the enzyme DNA gyrase and topoisomerase IV, which maintain the integrity of bacterial DNA. Linear calibration curves were obtained in human serum with an IC50 value of 0.87 μM. NAHSDMA was shown to be metabolized through hydrolysis by esterases or glucuronidases, oxidation by cytochrome P450 enzymes,Formula:C13H22NNaO5SPurity:Min. 95%Molecular weight:327.37 g/molN-Acetyl glufosinate sodium salt
CAS:N-Acetyl Glucosinate Sodium Salt is a fine chemical, research chemicals, and versatile building block that is used as an intermediate for the synthesis of N-acetyl-β-d-glucosaminidase. This product has been shown to be a useful scaffold for the synthesis of various compounds related to amino acid biosynthesis. It is also a reagent and useful intermediate in organic chemistry. N-Acetyl Glucosinate Sodium Salt can be used as a starting material for other reactions, such as the Beckmann rearrangement.
Formula:C7H12NNa2O5PPurity:(%) Min. 95%Color and Shape:White PowderMolecular weight:267.13 g/molSodium hydroxymethanesulfinate hydrate
CAS:Sodium hydroxymethanesulfinate is a chemical compound that has a molecular formula of CHOS. It is an acidic, water-soluble compound with the chemical formula CHOS. It is an intermediate in the reaction between glycol ethers and sodium hydroxide to form sodium sulfate. The reaction mechanism for this process is the following:Formula:HOCH2SO2Na·xH2OPurity:Min. 95%Color and Shape:PowderMolecular weight:118.09 g/molSodium bis(1,3-dimethylbutyl) sulfosuccinate
CAS:Sodium bis(1,3-dimethylbutyl) sulfosuccinate is a monomer that is used in the manufacture of polyvinyl pyrrolidone. It is an environmentally friendly polymerization product of perchloroethylene and deionized water. This monomer has been shown to be soluble in organic solvents, such as aromatic hydrocarbons, and can be synthesized from chloride and electron microscopic particles. Sodium bis(1,3-dimethylbutyl) sulfosuccinate has shown good performance as a coating material due to its high solids content and low viscosity.Formula:C16H29NaO7SPurity:(%) Min. 90%Color and Shape:Clear LiquidMolecular weight:388.45 g/molCefodizime sodium
CAS:Cefodizime sodium is a third-generation cephalosporin antibiotic. It is indicated for the treatment of bacterial infections in the skin, soft tissue, respiratory tract, and urinary tract. Cefodizime sodium prevents bacteria from multiplying by inhibiting cell wall synthesis and DNA replication. Cefodizime sodium has been shown to be effective against Staphylococcus aureus and Proteus mirabilis. However, it is not active against Enterobacteriaceae or Pseudomonas aeruginosa. The drug can cause drug reactions such as fever and rash in some patients.br>br>Cefodizime sodium is given intravenously or intramuscularly in combination with glucose injection for the treatment of bacterial infection. The drug should be diluted with hydrochloric acid before administration to prevent irritation to tissue.br>br>Cefodizime sodium is also administered intravenously or intramuscularly asFormula:C20H20N6O7S4•Na2Purity:Min. 95%Molecular weight:630.65 g/molSodium cocoyl isethionate, 83-88%
CAS:Sodium cocoyl isethionate is a surfactant that is used in pharmaceutical preparations for skin care. This ingredient has good stability and activity index, and can easily be solubilized in water and ethanol. Sodium cocoyl isethionate has been shown to have antioxidant properties, which may be due to its ability to scavenge free radicals. It also has moisturizing properties, which may be due to the presence of glycerin and fatty esters. Sodium cocoyl isethionate can be found in fruit extracts, such as mangoes and papaya.Purity:Min. 95%Color and Shape:White PowderCalcium-D-galactonate hydrate
CAS:Calcium-D-galactonate hydrate is a reagent that is used in organic synthesis as a complex compound. It can also be used as an intermediate for the synthesis of calcium-D-galactonate, which is a useful scaffold for the construction of bioactive molecules. Calcium-D-galactonate hydrate has been shown to have many uses in the pharmaceutical and fine chemical industries. This compound is also an important reactant in research, due to its versatility and usefulness in organic synthesis.
Formula:C12H22CaO14·5H2OPurity:Min. 98%Color and Shape:White PowderMolecular weight:520.45 g/molBis(triphenylphosphine)palladium(II) dichloride
CAS:Bis(triphenylphosphine)palladium(II) dichloride is an organometallic compound that has antibiotic activity. It is the active methylene in a number of drug molecules, including methyldopa, which is used to treat high blood pressure and postural hypotension. Bis(triphenylphosphine)palladium(II) dichloride also has potential use as a target enzyme for cross-coupling reactions. Cross-coupling reactions involve the coupling of organic compounds with organometallic reagents using palladium as a catalyst. The mechanism of this reaction involves the formation of a palladium-carbon bond by oxidative addition and reductive elimination, followed by the release of carbon monoxide. This process leads to the formation of an organometallic compound and an aryl halide. Bis(triphenylphosphine)palladium(II) dichloride can also be used in gel permeation chromFormula:C36H30Cl2P2PdPurity:Min. 95%Color and Shape:Yellow PowderMolecular weight:701.9 g/molAlendronic acid monosodium salt trihydrate - USP
CAS:Farnesyl diphosphate synthase inhibitor; inhibits bone resorptionFormula:C4H18NNaO10P2Purity:Min. 95%Color and Shape:White PowderMolecular weight:325.12 g/molLithium tetraborate
CAS:Lithium tetraborate (LiBO) is a compound used in the preparation of samples for laser ablation. It can be synthesized by reacting lithium carbonate with boron nitride in a hydrochloric acid solution at room temperature. Lithium tetraborate is often used as a buffer to increase the pH of the solution and to maintain it at a constant level during reactions. This compound has been studied extensively, and its spectroscopic properties have been well documented. The thermal expansion coefficient of LiBO is high, which makes it suitable for use in radiation experiments. Lithium tetraborate has also been shown to be an effective catalyst for organic synthesis reactions that require high activation energies, such as the synthesis of phenol from benzene and formaldehyde.
Formula:Li2B4O7Purity:Min. 95%Color and Shape:PowderMolecular weight:169.12 g/molIron(II) acetate
CAS:Iron(II) acetate is a salt formed by the reaction of ethylene diamine and iron(II). It has been proposed as an alternative to iron oxide for use in magnetic separation. Iron(II) acetate is a catalyst for the production of antimicrobial agents, which are used to control the growth of bacteria. Iron(II) acetate has also been shown to accelerate the production of angiogenic factors in response to nutrient solution and can be used as a solid catalyst for hydrogenation reactions. Iron(II) acetate is also used in detergent compositions because it binds with particulates and other small particles, such as soil and dust. This makes it possible for these materials to be removed from fabrics through washing. The particles are magnetically attracted to the iron, which are then removed during the rinse cycle.Formula:C4H6O4FePurity:Min. 95%Molecular weight:173.93 g/molSodium tungstate dihydrate
CAS:Sodium tungstate dihydrate (STDH) is a sodium salt that has been shown to be effective against the MCL-1 protein. This protein is involved in regulating energy metabolism and cell death. STDH binds to the MCL-1 protein, preventing it from forming an oligomer with other proteins. This prevents the MCL-1 protein from translocating into the mitochondria and disrupting the mitochondrial membrane potential, which leads to cell death. STDH has been shown to be effective against wild-type strains of bacteria as well as against bacterial strains that have developed resistance to antibiotics such as molybdenum and tungsten. STDH also inhibits axonal growth in vitro and human serum, leading to physiological effects such as blood coagulation.Formula:Na2WO4•(H2O)2Color and Shape:PowderMolecular weight:329.85 g/molPotassium iodide
CAS:Potassium iodide is a chemical compound that is used as a nutrient solution in the production of polyvinyl chloride. It reacts with sodium trifluoroacetate to produce potassium trifluoroacetate, which is then reacted with copper chloride to form copper trifluoride. The reaction produces hydrogen fluoride gas and anhydrous sodium carbonate. Potassium iodide has been shown to have some antiviral effects against hepatitis B virus and the herpes simplex virus type 1. This compound can also be used in wastewater treatment processes because it reacts with trifluoroacetic acid to form carbon dioxide and sodium bicarbonate. Potassium iodide can be titrated with hydrochloric acid or acetic acid to determine its concentration. In addition, potassium iodide can be used for chemiluminescent reactions and electrochemical impedance spectroscopy experiments.
Formula:IKPurity:Min 99%Color and Shape:White Off-White PowderMolecular weight:166 g/molCalcium 2-oxoglutarate
CAS:Calcium 2-oxoglutarate (Ca2OG) is a metabolite of the TCA cycle and has been shown to regulate energy metabolism. It can be used as a precursor for the synthesis of glutamate, which is an important neurotransmitter in the central nervous system. Ca2OG also has inhibitory properties on many enzymes, including enzymes involved in the synthesis of amino acids and fatty acids. Ca2OG has been shown to have a role in transcriptional regulation, acting as a transcriptional activator or repressor depending on cell type and stimulus. Ca2OG also affects plant metabolism by regulating caproic acid levels. This compound is structurally similar to oxoglutarate, which is found in vivo, but it is more stable than this form of glutamic acid due to the presence of calcium ions. Ca2OG has been synthesized in vitro using x-ray crystallography and biochemical properties have been determined through various biochemical assays.br>br>
Formula:C5H4O5·CaPurity:Min 98%Color and Shape:PowderMolecular weight:184.16 g/molMercury(I) chloride
CAS:Controlled ProductMercury chloride is a compound that consists of mercury and chlorine. It is used as an electrode in mercury-in-glass thermometers, which are used to measure temperature. Mercury chloride has also been used to detect the presence of mercurous ions in water. In addition, it is used as a reagent for qualitative determination of hydrogen peroxide and sulfur dioxide. Mercury chloride can be prepared by reacting sodium carbonate with mercurous nitrate or mercurous oxide at high temperatures. The reaction solution must be heated for about an hour to drive off the water vapor and produce the solid product. Mercury(I) chloride has been shown to have high resistance to oxidation and reduction reactions, making it a useful model system for studying redox potentials. The detection sensitivity of mercury(I) chloride is very low, but this can be increased by using t84 cells as a model system. This compound reacts with water molecules in the air, so sample preparation should include drying under vacuum or heating onFormula:Hg2Cl2Purity:Min. 95%Molecular weight:472.09 g/molCarbasalate calcium
CAS:Carbasalate calcium is useful in the treatment of chronic and acute infectious diseases, such as influenza, paratyphoid fever, bronchitis, and other respiratory tract infections. It also has been shown to be effective in the prevention of heart disease. Carbasalate calcium binds to the acetylsalicylic acid receptor site on the surface of platelets and prevents aggregation. This drug is a non-steroidal anti-inflammatory drug (NSAID) that inhibits prostaglandin synthesis by blocking cyclooxygenase enzymes. The pharmacological activity of carbasalate calcium is assessed by measuring its ability to inhibit platelet aggregation in whole blood samples from patients with congestive heart failure. The test solution is prepared by adding trifluoroacetic acid to a reaction solution that contains multivalent ions of calcium and acetylsalicylic acid. The amount of carbasalate calcium present in this mixture can be determined using LC-MS/MS analytical methods
Formula:C20H22CaN4O10Purity:Min. 95%Color and Shape:PowderMolecular weight:518.49 g/molLithium 3,5-diiodosalicylic acid
CAS:Lithium 3,5-diiodosalicylic acid (Li3,5I2SA) is a cross-linking agent that has been shown to inhibit phosphatase activity and receptor binding in vitro. It also inhibits sugar transport, which is important for the functioning of human cells. Li3,5I2SA has been used to study the action of drugs on cancer cells and spermatozoa. This compound has also been tested as an inhibitor of membrane lipid peroxidation. Li3,5I2SA attaches to red blood cell membranes by binding to sites with high concentrations of monoclonal antibodies. The sequences of this compound have not yet been fully elucidated.
Formula:C7H4I2O3•LiPurity:Min. 98 Area-%Color and Shape:PowderMolecular weight:396.85 g/molN-Chloro-4-toluenesulfonamide sodium
CAS:N-Chloro-4-toluenesulfonamide sodium (NCTS) is a disinfectant that is used to treat wastewater and as a preservative for water. It has been shown to be effective against bacteria, fungi, and viruses. NCTS is an antimicrobial agent that reacts with the matrix in which it is applied to form chloramines-T (NHClO). The chloramines-T inhibits the activity of enzymes such as those involved in DNA synthesis and protein synthesis. This reaction also generates an electric current due to the redox potentials of the reactants. The presence of aziridines in NCTS leads to crosslinking between proteins, which enhances its effectiveness as a disinfectant. NCTS has been shown to have no adverse effects on human erythrocytes or DNA when used at concentrations up to 100 µg/mL.Formula:C7H8ClNO2S•NaPurity:Min. 95%Color and Shape:PowderMolecular weight:228.65 g/molCarbonyldiiodo(pentamethylcyclopentadienyl)cobalt(III)
CAS:Carbonyldiiodo(pentamethylcyclopentadienyl)cobalt(III) is a high-quality, reagent, complex compound that is useful as a reaction component in the production of fine chemicals and speciality chemicals. It is also used as a building block for more complex compounds. This versatile building block can be used to produce research chemicals, useful scaffolds and building blocks for organic synthesis. Carbonyldiiodo(pentamethylcyclopentadienyl)cobalt(III) has CAS number 35886-64-7.Formula:C11H15CoI2OPurity:Min. 95%Color and Shape:Black SolidMolecular weight:475.98 g/molSodium isopropylxanthate
CAS:Sodium isopropylxanthate is a chemical compound that is used in the production of chitosan polymers. It is a white solid that is soluble in water and methanol, with a melting point of about 150-160°C. The adsorption mechanism of this chemical compound has been shown to be through hydrogen bonding between hydroxyl groups on the surface of pyrite and xanthate anions, which are ionized at the pH values present in the environment. Sodium isopropylxanthate has been shown to interact with chitosan polymer, which can be electrochemically detected through impedance spectroscopy. Furthermore, it can react with benzyl groups to form carbon disulphide, which has a redox potential of -0.5V, suggesting that sodium isopropylxanthate should be added to solutions containing benzyl groups at concentrations below its optimum concentration for maximum effectiveness. This chemical compound also shows uptakeFormula:C4H7NaOS2Purity:Min. 90%Color and Shape:Off-White PowderMolecular weight:158.22 g/molSulfo-N-succinimidyl 6-[3-(2-pyridyldithio)propionamido] hexanoate, sodium salt
CAS:Sulfo-N-succinimidyl 6-[3-(2-pyridyldithio)propionamido] hexanoate, sodium salt is a monoclonal antibody that binds to survivin and inhibits the immune reaction. It has been shown to be effective against P. aeruginosa and metallothionein with a strong binding affinity for antigen and can be used as an immobilization agent for nanosensors.Formula:C18H22N3NaO8S3Purity:Min. 95%Color and Shape:Off-White To Tan SolidMolecular weight:527.57 g/molIsopilocarpic acid sodium salt
CAS:Isopilocarpic acid sodium salt is a synthetic compound that contains methyl groups and electron. It is an utilizable and liquid chromatographic compound with an acyl group. Isopilocarpic acid sodium salt has been shown to be a prodrug derivative that is hydrolyzed to form the active methylene and hydroxy groups. The aliphatic chain in this compound can be ethylene or benzyl.Formula:C11H17N2NaO3Purity:Min. 95%Color and Shape:White PowderMolecular weight:248.25 g/molDipotassium hydrogen phosphite
CAS:Dipotassium hydrogen phosphite is a versatile building block that has many uses in research and commercial laboratories. It can be used as a reagent, intermediate, or scaffold for the synthesis of other compounds. Dipotassium hydrogen phosphite has been shown to have high quality and purity, making it an excellent choice for any chemical synthesis.Formula:H3O3P·2KColor and Shape:PowderMolecular weight:160.19 g/mol(1,5-Cyclooctadiene)bis(methyldiphenylphosphine) iridium(I) hexafluorophosphate
CAS:(1,5-Cyclooctadiene)bis(methyldiphenylphosphine) iridium(I) hexafluorophosphate is an organometallic compound that is a reagent for the synthesis of β-unsaturated aldehydes. It can be used in organic solvents such as diethyl ether and hexanes to transvinylate anion with methanol or ethylene glycol to produce propenyl alcohols. (1,5-Cyclooctadiene)bis(methyldiphenylphosphine) iridium(I) hexafluorophosphate has been found to be insoluble in water, alcohols, and acetals.
Formula:C34H38F6IrP3Purity:Min. 97%Color and Shape:PowderMolecular weight:845.79 g/molEosin Y disodium salt
CAS:Eosin Y, a red xanthene dye, has been noted to reduce the affinity of Mg2+-ATPase for ATP and increase the enzyme affinity for Mg2+ at concentrations of 10-50 μM. At higher concentrations near 100 μM the affinity for Mg2+-ATPase for the ion-activator has been shown to be reduced. This compound has also been reported to be a photosensitizer that works as a molecular photoelectrode via catalyzation of the visible-light-driven electron-transfer reaction. Eosin Y has been used to stain structures such as muscle, cytoplasm, and collagen. This agent also enhances fluorescent quenching abilities by forming a complex with polyvinulpyrrolidone.
Formula:C20H6Br4Na2O5Purity:Min. 95%Color and Shape:Brown PowderMolecular weight:691.85 g/molAcamprosate calcium
CAS:GABA receptor agonist; threatment for alcohol dependence
Formula:C10H20CaN2O8S2Purity:Min 98%Color and Shape:White PowderMolecular weight:400.48 g/molDihexyl sodium sulfosuccinate, 80% aqueous solution
CAS:Dihexyl sodium sulfosuccinate is a compound used as a substrate film in tumor treatment. It is an anhydrous sodium salt of sulfosuccinic acid and has a high resistance to radiation and oxidation. The hydroxyl group on the dihexyl sodium sulfosuccinate molecule allows the polymer to be dissolved in water. The receptor molecule, surfactant, can be used to control the particle size of the polymer. This product was injected into tumors to study its effect on tumor size and weight.Formula:C16H30O7S•NaPurity:79 To 81%Color and Shape:Clear LiquidMolecular weight:389.46 g/molPotassium 4-biphenylcarboxylate
CAS:Potassium 4-biphenylcarboxylate is a fine chemical that is a useful intermediate for research chemicals. It is a versatile building block and can be used as a reaction component in the synthesis of complex compounds. Potassium 4-biphenylcarboxylate has been shown to react with polystyrene to form poly(4-phenoxybutadiene), which is known for its high quality and good solubility. Potassium 4-biphenylcarboxylate has also been shown to have antioxidant properties, which may be due to its ability to scavenge reactive oxygen species (ROS).Formula:C13H9O2•KPurity:Min. 95%Color and Shape:PowderMolecular weight:236.31 g/molSodium pyroantimonate
CAS:Sodium pyroantimonate is a chemical compound that has been used as an intermediate in the synthesis of other, more complex compounds. It is a white solid with a melting point of about 300°C. This compound can be used to react with substances containing carbon, sulfur, or nitrogen. It can also be used as a reagent for the preparation of other chemicals. Sodium pyroantimonate is not soluble in water and does not react with acids or bases.
Formula:H2Na2O7Sb2Color and Shape:PowderMolecular weight:403.51 g/molTetrakis[N-phthaloyl-(R)-tert-leucinato]dirhodium bis(ethyl acetate) adduct
CAS:Tetrakis[N-phthaloyl-(R)-tert-leucinato]dirhodium bis(ethyl acetate) adduct is a reagent that is used in organic synthesis and research. It has been shown to be useful as a scaffold for the synthesis of complex compounds, such as polymers. Tetrakis[N-phthaloyl-(R)-tert-leucinato]dirhodium bis(ethyl acetate) adduct can be used as an intermediate in the production of fine chemicals and speciality chemicals, as well as a versatile building block for the synthesis of diverse chemical compounds.
Formula:C56H56N4O16Rh2·C8H16O4Purity:Min. 95%Color and Shape:Yellow To Brown To Dark Green SolidMolecular weight:1423.08Ferulic acid 4-O-sulfate disodium salt
CAS:Ferulic acid 4-O-sulfate disodium salt is a compound belonging to the class of hydroxybenzoic acids. It is found in plant and animal tissue, as well as in urine samples. Ferulic acid 4-O-sulfate disodium salt has been shown to have antitumorigenic activity on thp-1 cells by inhibiting activation of toll-like receptor 2 (TLR2). It also inhibits the production of proinflammatory cytokines and interleukin 6 (IL6) in human macrophages. Ferulic acid 4-O-sulfate disodium salt may be a potential chemopreventive agent for women with breast cancer who are at high risk for recurrence. In addition, ferulic acid 4-O-sulfate disodium salt may have antiobesity properties that are mediated through inhibition of fatty acid synthesis in humans.
Formula:C10H8Na2O7SPurity:Min. 95%Color and Shape:White Off-White PowderMolecular weight:318.21 g/molSodium Hexadecyl Sulfate - contains ca. 40% Sodium Stearyl Sulfate
CAS:Sodium hexadecyl sulfate is a nonionic surfactant with emulsifying and solubilizing properties. It is used as an industrial chemical, a catalyst for the synthesis of pharmaceuticals, and in textile processing. It has been shown to be effective in the production of chlorophyll a. Sodium hexadecyl sulfate is also used as a fluorescence probe to measure metal ions such as Ca2+, Cu2+, Fe3+, Mn2+, Ni2+ and Zn2+. The process optimization of this compound can be measured by titration calorimetry or ester hydrochloride. Molecular weight: 564.4 Molecular formula: C18H36O3S Boiling point: 230 °C Melting point: -5 °CFormula:C16H33NaO4SPurity:(Gc) Min. 50.0%Color and Shape:PowderMolecular weight:344.49 g/molEtidronate disodium
CAS:Atherosclerotic plaque inhibitor; anti-bone resorptive therapy
Formula:C2H6Na2O7P2·xH2OPurity:Min. 95%Color and Shape:PowderMolecular weight:249.99 g/molCitric acid tripotassium monohydrate
CAS:Citric acid tripotassium salt monohydrate is a membrane-stabilizing agent that has been shown to improve the function of the circuitry in animals. It has been used for the treatment of motoneurons and muscle pain. Citric acid tripotassium salt monohydrate has also been found to be an effective treatment for chronic pain, which may be due to its ability to block pain signals from reaching the brain. This drug has also shown efficacy in treating neurological disorders such as Parkinson's disease, Alzheimer's disease, and multiple sclerosis. Citric acid tripotassium salt monohydrate is effective at improving the physiological mechanisms that are responsible for translating nervous system activity into movement.Formula:C6H8O7•H2O•K3Purity:Min. 95%Color and Shape:White To Off-White SolidMolecular weight:237.43 g/molDoxycycline calcium
CAS:Antibiotic; anti-protozoal; anti-helmintic; protein synthesis inhibitorFormula:C22H24N2O8·2CaPurity:Min. 95%Molecular weight:524.59 g/mol1-[[5-(p-Nitrophenyl)furfurylidene]amino]-hydantoin sodium
CAS:Dantrolene sodium is a muscle relaxant that belongs to the group of pharmacological agents. It is used to treat muscle spasms and hyperactivity in patients with neuromuscular disorders. Dantrolene sodium inhibits calcium release by blocking the activity of the enzyme ryanodine receptor in skeletal muscle cells. This inhibition prevents uncontrolled contraction of muscles and reduces their energy consumption. The drug also has an effect on malignant hyperthermia, which is caused by an increase in the production of adenosine triphosphate (ATP) due to increased cellular metabolism. Dantrolene sodium can inhibit ATP synthesis, thus reducing energy production and stabilizing cell membranes, thereby preventing cell death in neurons and other tissues.
Formula:C14H10N4O5•NaPurity:Min. 95%Color and Shape:Yellow PowderMolecular weight:337.24 g/molPotassium ferricyanide
CAS:Controlled ProductPotassium ferricyanide is a metal salt that has been used as a model system to study the rate constant of antimicrobial agents. It is also used in wastewater treatment and analytical methods, such as chemiluminescence. Potassium ferricyanide reacts with an electron-donating substance, such as sodium dodecyl sulfate or an organic compound containing hydroxyl groups, to form a radical anion. The radical anion can react with oxygen to form chemiluminescence. Potassium ferricyanide is also a useful reagent for analytical determination of metals such as iron and copper by complexation with chelating agents.
Formula:C6FeN6•K3Purity:Min. 95%Color and Shape:PowderMolecular weight:329.24 g/molDisodium clodronate tetrahydrate
CAS:Disodium clodronate tetrahydrate is a water-soluble salt of the active form of clodronic acid, which has been shown to have anti-inflammatory activity. It is used in the treatment of breast cancer, as well as bowel disease. Disodium clodronate tetrahydrate inhibits basic protein synthesis and the production of pro-inflammatory cytokines by toll-like receptor 4 (TLR4) on polymorphonuclear leucocytes (PMN). This drug has also been shown to inhibit the enzyme activities of sodium salts, but not other enzymes such as phosphofructokinase or lactate dehydrogenase. Disodium clodronate tetrahydrate is also used in analytical methods that are based on measuring changes in the migration rate of proteins.Formula:CH2Cl2Na2O6P2·4H2OColor and Shape:White PowderMolecular weight:360.92 g/mol
![5-Methyl-[1,3,4]oxadiazole-2-carboxylic acid, potassium salt](/_next/image/?url=https%3A%2Fstatic.cymitquimica.com%2Fproducts%2F3D%2Fthumb-webp%2FFM56554.webp&w=3840&q=75)
![Calcium bis[monoethyl(3,5-di-tert-butyl-4-hydroxylbenzyl)phosphonate]](/_next/image/?url=https%3A%2Fstatic.cymitquimica.com%2Fproducts%2F3D%2Fthumb-webp%2FFC150093.webp&w=3840&q=75)
![[1,1'-Bis(diphenylphosphino)ferrocene]-dichloropalladium (II)](/_next/image/?url=https%3A%2Fstatic.cymitquimica.com%2Fproducts%2F3D%2Fthumb-webp%2FFB13964.webp&w=3840&q=75)
![Sulfo-N-succinimidyl 6-[3-(2-pyridyldithio)propionamido] hexanoate, sodium salt](/_next/image/?url=https%3A%2Fstatic.cymitquimica.com%2Fproducts%2F3D%2Fthumb-webp%2FFS27955.webp&w=3840&q=75)
![Tetrakis[N-phthaloyl-(R)-tert-leucinato]dirhodium bis(ethyl acetate) adduct](/_next/image/?url=https%3A%2Fstatic.cymitquimica.com%2Fproducts%2F3D%2Fthumb-webp%2FFT60015.webp&w=3840&q=75)
![1-[[5-(p-Nitrophenyl)furfurylidene]amino]-hydantoin sodium](/_next/image/?url=https%3A%2Fstatic.cymitquimica.com%2Fproducts%2F3D%2Fthumb-webp%2FFN44999.webp&w=3840&q=75)
