APIs for research and impurities
Subcategories of "APIs for research and impurities"
- Aminoacids and derivatives(12,319 products)
- Anthraquinones and derivatives(402 products)
- Benzimidazole and Imidazole Derivatives(10,389 products)
- Benzodiazepine Derivatives(326 products)
- Carbohydrates and glycoconjugates(5,046 products)
- Esters and Derivatives(42,242 products)
- Fatty Acids and Lypidic Derivatives(32,371 products)
- Flavonoids and Polyphenols(17,073 products)
- Free Radicals and Oxidant/Reducing Agents(211 products)
- Ketones and derivatives(2,398 products)
- Natural and semi-synthetic antibiotics(6,321 products)
- Nitriles and Cyano Derivatives(3,068 products)
- Nitrosamines and Derivatives(55 products)
- Nucleosides and Nucleotides(3,444 products)
- Organic Phosphates and Phosphonates(1,193 products)
- Organic Sulphonates and Sulphates(10,418 products)
- Organometallics(4,417 products)
- Others(6,270 products)
- Peptides and Proteins(3,132 products)
- Polymers and Derivatives(99 products)
- Purines and Pyrimidine Derivatives(8,895 products)
- Quinazoline and Quinoline Derivatives(65,667 products)
- Quinones and Derivatives(24,338 products)
- Salts and Derivatives of Active Pharmaceutical Ingredients (API)(81,324 products)
- Steroids and Derivatives(4,922 products)
- Sulfonamides and Derivatives(2,562 products)
- Terpenoids and Derivatives(3,834 products)
- Thiazolidinediones and Thiopyrans(2,753 products)
- β-Adrenergic Compounds(227 products)
Found 58697 products of "APIs for research and impurities"
Regorafenib metabolite M2 oxide
CAS:Regorafenib metabolite M2 oxide (M2O) is a cancer drug that is an inhibitor of multikinase. It was developed as a prodrug for regorafenib, which is used to treat patients with metastatic colorectal cancer and has been shown to be effective against other cancers, such as lung and pancreatic cancer. M2O inhibits the efflux of drugs from cells by binding to the transporter protein P-glycoprotein. This prevents the accumulation of toxic concentrations of regorafenib in cells, which are responsible for its side effects, such as diarrhea and liver damage. The uptake of M2O by cells is also inhibited by light and acidic conditions. Oral administration of M2O leads to increased exposure to regorafenib in the body because it is not metabolized by CYP3A4 enzymes.
Formula:C21H15ClF4N4O4Purity:Min. 95%Molecular weight:498.81 g/molRef: 3D-IR164114
Discontinued productDoxorubicin Impurity 15
CAS:Doxorubicin impurity 15 is a natural product that is used as an analytical reference standard in pharmacopoeia. It has been synthesized for use in drug development and research and development, and is available as a high-purity HPLC standard. Doxorubicin impurity 15 has a CAS number of 131086-18-5.
Formula:C31H38BrNO11Purity:Min. 95%Molecular weight:680.54 g/molRef: 3D-ID163220
Discontinued productFonofos
CAS:Fonofos is a potent inhibitor that has been shown to induce apoptosis in Chinese hamster ovary cells. It is also known to inhibit chitin kinase, a protein that plays an important role in the biosynthesis of chitin, which is essential for the formation of cell walls in fungi and insects. Fonofos has medicinal properties and has been studied as a potential anticancer agent due to its ability to inhibit tumor growth. In vitro studies have shown that Fonofos can inhibit the growth of human cancer cells by inhibiting heparin-binding proteins. Additionally, it has been found to have inhibitory effects on several other enzymes involved in cancer development and progression. Although not approved for use in humans, Fonofos may hold promise as a therapeutic agent for the treatment of certain cancers.
Formula:C10H15OPS2Purity:Min. 95%Molecular weight:246.3 g/molRef: 3D-AAA94422
Discontinued productNaproxen Impurity C
CAS:Naproxen Impurity C is an analytical impurity that is found in Naproxen. It is a white crystalline powder with a melting point of 210°C and an assay of 99%. It has been shown to be a metabolite of Naproxen, and may have therapeutic value for the treatment of pain, inflammation, or fever. The purity of this product has been verified by HPLC analysis.
Formula:C14H13BrO3Purity:Min. 95%Molecular weight:309.16 g/molRemdesivir impurity 3 HCl
CAS:Remdesivir impurity 3 HCl is a drug product that is a metabolite of Remdesivir. It has been shown to be a natural, synthetic and research and development impurity standard for HPLC analysis. CAS No.: 2096981-79-0
Formula:C9H19NO2·HClPurity:Min. 95%Molecular weight:209.71 g/molRemdesivir related compound 9
CAS:Remdesivir related compound 9 is a drug product that is an analytical standard. It is a natural API impurity, which has been synthesized for use as an impurity standard. This compound has been custom synthesized to be used as a research and development chemical. CAS No. 1439900-56-7 is the number of this synthetic drug product. It can be used in HPLC standards and it meets pharmacopoeia requirements for purity. The niche market for this compound is high purity analytical standards, including HPLC standards.
Formula:C21H27N2O7PPurity:Min. 95%Molecular weight:450.42 g/mol6-Bromo-6-dehydro-17a-acetoxy progesterone
CAS:Controlled Product6-Bromo-6-dehydro-17a-acetoxy progesterone is a drug product that can be used as an HPLC standard or as a synthetic intermediate. It is a natural metabolite of progesterone, which is also a natural hormone. 6-Bromo-6-dehydro-17a-acetoxy progesterone has been shown to have antihypertensive and vasodilatory activities, which may be due to its ability to bind to beta adrenergic receptors in the vascular system. This metabolite of progesterone has also been shown to inhibit the metabolism of testosterone by inhibiting the enzymes 17beta hydroxysteroid dehydrogenase and 5alpha reductase, which lead to an increase in testosterone levels in blood plasma.Formula:C23H29BrO4Purity:Min. 95%Molecular weight:449.38 g/molErgosterone
CAS:Controlled ProductErgosterone is a potent anticancer agent that has been shown to induce apoptosis in various human cancer cell lines. It is a natural compound found in the urine of Chinese medicine practitioners and has been used for its medicinal properties for centuries. Ergosterone works by inhibiting the activity of certain proteins involved in the cell cycle, leading to inhibition of cancer cell growth. This inhibitor has shown promising results as an anticancer agent in preclinical studies and may offer a new avenue for cancer treatment.
Formula:C28H42OPurity:Min. 95%Molecular weight:394.6 g/molRef: 3D-SAA39857
Discontinued productEthyl (S)-1-phenyl-1,2,3,4-tetrahydro-2-isoquinolinecarboxylate
CAS:Ethyl (S)-1-phenyl-1,2,3,4-tetrahydro-2-isoquinolinecarboxylate is an analytical standard used to identify impurities in drug products. It is a metabolite of the drug product and has been shown to be safe for human consumption. The compound is a synthetic chemical that is not found naturally in the environment. CAS No. 180468-42-2
Formula:C18H19NO2Purity:Min. 95%Molecular weight:281.35 g/molRef: 3D-IE71486
Discontinued productEthyl 6-[4-[(5-chloro-1-oxopentyl)amino]phenyl]-4,5,6,7-tetrahydro-1-(4-methoxyphenyl)-7-oxo-1H-pyrazolo[3,4-c]pyridine-3-carboxylat e
CAS:Ethyl 6-[4-[(5-chloro-1-oxopentyl)amino]phenyl]-4,5,6,7-tetrahydro-1-(4-methoxyphenyl)-7-oxo-1H-pyrazolo[3,4-c]pyridine-3-carboxylate is a chemical compound with various applications. It is soluble in methanol and has been found to interact with peptidoglycan, cellulose, and other substances. This compound has shown potential anticoagulation properties and has been studied for its effects on blonanserin, etoricoxib, 27-hydroxycholesterol, tenofovir, proton, famotidine, dimethyl fumarate, calpain, dimethyl sulfoxide, and reactive agents. Further research is needed to fully understand the potential applications of this compound and its interactions with different substances.
Formula:C27H29ClN4O5Purity:Min. 95%Molecular weight:525 g/molRef: 3D-WGC82320
Discontinued productPyrimido[1,2-a]purin-10(1H)-one
CAS:Pyrimido[1,2-a]purin-10(1H)-one is a cytotoxic drug used in the treatment of various cancers. It is an analog of purine nucleoside and has been shown to inhibit mitochondrial functions and nuclear DNA synthesis, as well as to induce malondialdehyde production. Pyrimido[1,2-a]purin-10(1H)-one also inhibits protein synthesis by methyltransferase inhibition. The detection sensitivity of pyrimido[1,2-a]purin-10(1H)-one has been demonstrated using titration calorimetry on sephadex g-100 columns. This compound is not active against E. coli K12 but is active against other bacteria including Staphylococcus aureus isolates that are resistant to methicillin.
Formula:C8H5N5OPurity:Min. 95%Molecular weight:187.16 g/molCefdinir impurity E
CAS:Cefdinir impurity E is a research and development, impurity standard, custom synthesis, drug product, synthetic, high purity, pharmacopoeia, drug development and analytical standard. CAS No. 946573-41-7 is the metabolite of cefdinir. It is used to study metabolism of cefdinir in vitro and in vivo. HPLC standards are available for this compound.
Purity:Min. 95%[5-L-Aspartic Acid]-desmopressin
Desmopressin is a synthetic drug that is used to treat diabetes insipidus and bleeding in patients who are on anticoagulants. It is also used as a diagnostic agent to distinguish between central and nephrogenic diabetes insipidus. Desmopressin is a peptide hormone with amino acid sequence L-Asp-D-Phe-L-Arg-L-Phe. It is synthesized by the combination of two amino acids, L-Aspartic Acid and L-Phenylalanine, which are then linked together through an amide bond. The synthesis of desmopressin occurs in two steps: first, the coupling of amino acid L-Aspartic Acid with the peptide linkage (N-[3-(2'-aminoethyl) carbonyl]glycine) to form the intermediate N-[3-(2'-Aminoethyl) carbonyl]-L-Aspartic Acid; second
Purity:Min. 95%Irinotecan lactone impurity
CAS:Irinotecan is a drug product that is used in the treatment of cancer. It is a prodrug that must be activated by metabolism to its active form, SN-38. Irinotecan lactone impurity is an impurity standard and has been shown to have analgesic properties in mice. It has also been shown to inhibit the growth of colon cancer cells.
Formula:C32H36N4O5Purity:Min. 95%Molecular weight:556.7 g/molRef: 3D-II180814
Discontinued productVarenicline N-oxide
CAS:Varenicline N-oxide is a synthetic drug product. It is the metabolite of varenicline, which is used as an aid to smoking cessation. Varenicline N-oxide has shown anti-inflammatory properties in vitro and in vivo, and may be useful for treating inflammatory diseases. Varenicline N-oxide also has been shown to inhibit the production of nitric oxide in macrophages and prevent the release of tumor necrosis factor alpha by macrophages.
Formula:C13H13N3OPurity:Min. 95%Molecular weight:227.26 g/molRef: 3D-IV177544
Discontinued productTriacetyl aloe-emodin (impurity A)
CAS:Triacetyl aloe-emodin (impurity A) is an impurity found in the Triacetyl Aloe-Emodin HPLC standard, which is a drug product. It is not approved for use as a drug and should be used only for research and development purposes. The impurity can be custom synthesized or purchased from a specialty chemical supplier. Impurities are not typically found in the final drug product but can occur during synthesis or purification of the API. This impurity is not present in any pharmacopoeia and has no known biological activity. The CAS number of this impurity is 25395-11-3.
Formula:C21H16O8Purity:Min. 95%Molecular weight:396.35 g/molRef: 3D-IT28380
Discontinued productSpirolaxine
CAS:Spirolaxine is a coumarin derivative that has been shown to have anti-cancer properties. It was isolated from an extract of the fungus Spirolaxine, which was found in the gastroduodenum (gut) of a frog. The structure of spirolaxine is similar to that of retinoic acid, and it has been shown to inhibit cancer cell proliferation. Spirolaxine also inhibits the production of proinflammatory cytokines in mice with colitis. This drug has not yet been tested for its ability to treat other diseases, such as diabetes, but may be able to regulate blood sugar levels by inhibiting insulin secretion and increasing glucose uptake by cells.
Formula:C23H32O6Purity:Min. 95%Molecular weight:404.5 g/molRef: 3D-BFA38201
Discontinued productBenzathine ampicillin
CAS:Benzathine ampicillin is a penicillin antibiotic that belongs to the group of β-lactam antibiotics. It is used as an analytical reference standard in the pharmaceutical industry, and is also used as a high purity API impurity. Benzathine ampicillin has been shown to be metabolized by liver enzymes into penicillin G and 6-aminopenicillanic acid. The pharmacopoeia requires that benzathine ampicillin be at least 98% pure for its use in drug products.
Formula:C48H58N8O8S2Purity:Min. 95%Molecular weight:939.20 g/molRef: 3D-IBA27675
Discontinued productDesisobutyl-N-butyl bortezomib
CAS:Desisobutyl-N-butyl bortezomib is a drug product that has been custom synthesized for the purpose of research and development. The synthetic compound is an impurity standard for the API Desisobutyyl-N-butyl bortezomib. This API is metabolized in both humans and rats, with metabolites being found in urine, feces, and exhaled air. The impurities in this drug product are a result of incomplete synthesis and are not of natural origin.
Formula:C19H25BN4O4Purity:Min. 95%Molecular weight:384.2 g/molRef: 3D-EUB01135
Discontinued product2-(4-Formylphenyl)propionic acid - Racemic
CAS:2-(4-Formylphenyl)propionic acid is a racemic mixture of 2-formylphenylacetic acid and 4-formylphenylacetic acid. This compound is used in the treatment of bacterial infections and inflammation. It is an organic solution that can be injected, administered orally, or applied topically. The 2-(4-formylphenyl)propionic acid has been shown to have anti-inflammatory properties, but also has side effects such as skin irritation when it is applied topically. This drug can also cause nausea, vomiting, and diarrhea when administered orally.
Formula:C10H10O3Purity:Min. 95%Color and Shape:White PowderMolecular weight:178.18 g/molRef: 3D-IF27430
Discontinued product5-Oxo Rosuvastatin
CAS:5-Oxo Rosuvastatin is a drug product that has been synthesized from natural ingredients. It is an analytical standard for the impurity, 5-oxo-rosuvastatin, which is a potential impurity in the API, rosuvastatin. This drug product has been custom synthesized in order to provide an Impurity Standard for HPLC. This drug product is also used as a Synthetic Reference Standard for Drug Development and Research and Development.
Formula:C22H26FN3O6SPurity:Min. 95%Color and Shape:Off-White To Light (Or Pale) Yellow To Dark Yellow SolidMolecular weight:479.52 g/molMinocycline EP Impurity H
CAS:Please enquire for more information about Minocycline EP Impurity H including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formula:C23H25N3O7Purity:Min. 95%Molecular weight:455.47 g/molFR900359
CAS:FR900359 is a drug product that is custom synthesized and characterized. It has a purity of 99% and CAS No. 107530-18-7. This product is used in metabolism studies, natural drug development, pharmacopoeia, and research and development. The impurity standard for this product is HPLC standard.
Formula:C49H75N7O15Purity:Min. 95%Molecular weight:1,002.20 g/molRef: 3D-HEA53018
Discontinued product1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-b enzimidazole
CAS:1-[[3-Methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]-2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-b enzimidazole is an impurity of a drug product. It is a metabolite that has been shown to be present in human plasma and urine. This compound is synthetically produced and is not found in nature. It has been shown to have niche applications in both analytical chemistry and pharmacopoeia.
Formula:C25H22F6N4O3SPurity:Min. 95%Molecular weight:572.52 g/molRef: 3D-IM25689
Discontinued product4-Desmethyl 5-methyl vortioxetine hydrochloride
CAS:Please enquire for more information about 4-Desmethyl 5-methyl vortioxetine hydrochloride including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formula:C18H23ClN2SPurity:Min. 95%Molecular weight:334.9 g/molRef: 3D-MKD72214
Discontinued productVortioxetine Impurity 25
CAS:Vortioxetine Impurity 25 is a drug product that is an analytical impurity. It is a natural impurity found in the synthetic process of Vortioxetine, which is an active pharmaceutical ingredient (API). It has been shown to have pharmacological effects in humans and animals. This compound has been synthesized for use as a standard for HPLC assays. The CAS number for this substance is 1639263-80-1.
Formula:C18H22N2O2SPurity:Min. 95%Molecular weight:330.4 g/mol1-(2-Furoyl)piperazine
CAS:1-(2-Furoyl)piperazine is a potent inhibitor of tyrosinase, an enzyme involved in the production of melanin. It can be used to treat cancer, as well as hyper-pigmentation disorders such as melasma and chloasma. 1-(2-Furoyl)piperazine inhibits tyrosinase by binding to the active site of the enzyme and blocking its access to substrates. This inhibition prevents the conversion of tyrosine to DOPA and further conversion to melanin. 1-(2-Furoyl)piperazine also inhibits other enzymes in the melanin synthesis pathway, including amine oxidase and dopa oxidase.
Formula:C9H12N2O2Purity:Min. 95%Color and Shape:PowderMolecular weight:180.2 g/molRef: 3D-IF36870
Discontinued productAzelastine N-oxide, mixture of diastereomers
CAS:Azelastine N-oxide is a racemic form of azelastine, an antihistamine. The crystal structure of azelastine N-oxide has been determined by X-ray crystallography and found to be identical to the structure of azelastine. Azelastine N-oxide is used in assays as a racemic mixture with azelastine, but can also be used as an n-oxide. Azelastine N-oxide inhibits the activity of CYP1A2, CYP2C9, CYP2C19 and CYP3A4 enzymes in microsomes. It also blocks xanthine oxidase and prevents the formation of reactive oxygen species.Formula:C22H24ClN3O2Purity:Min. 95%Molecular weight:397.9 g/molRef: 3D-QAB27988
Discontinued productM,M-Quaterphenyl
CAS:M,M-Quaterphenyl is a low energy fluorescent molecule that emits light in the near ultraviolet region of the electromagnetic spectrum. It is chemically stable and has a high quantum yield. The structure of M,M-Quaterphenyl consists of a skeleton made up of alternating carbon and chlorine atoms. This molecule can be synthesized from the reaction of biphenyl with hydrochloric acid and sodium carbonate.
Formula:C24H18Purity:Min. 95%Molecular weight:306.4 g/molRef: 3D-BAA16618
Discontinued productSr 33805 oxalate
CAS:Sr 33805 oxalate is a potent inhibitor of cell proliferation that is used in the treatment of cancer. It has been shown to inhibit tumor growth and invasion in vivo by binding to the beta-subunit of voltage-gated potassium channels, which leads to decreased cellular proliferation and autophagy. Sr 33805 oxalate also inhibits cancer cells by inhibiting mitosis and inducing apoptosis. This agent has cytotoxic effects on brain cells, with an IC50 value of 0.1 μM in vitro against rat cerebellar neurons. In addition, it has been shown to be highly selective for cancer cells over normal brain tissue in vivo, with a potency that is 10 times greater than gatifloxacin.
Formula:C34H42N2O9SPurity:Min. 95%Molecular weight:654.8 g/molRef: 3D-WEA34633
Discontinued productN-(2-Hydroxyethyl)-P,P-bisaziridinyl thiophosphamide
CAS:N-(2-Hydroxyethyl)-P,P-bisaziridinyl thiophosphamide (HEPBTP) is a metabolite of the drug product. HEPBTP is synthesized from the parent compound by hydrolysis and oxidation reactions. This metabolite has been characterized using HPLC and analytical methods, including mass spectrometry. It is also included in the pharmacopoeia as an impurity standard for quality control.
Formula:C6H15N3O4PSPurity:Min. 95%Molecular weight:256.24 g/molRef: 3D-IH180621
Discontinued productPseudomonic acid D sodium
CAS:Pseudomonic acid D sodium is a drug product that is used for the development of novel drugs. It is a natural metabolite of pseudomonic acid A, which is found in the fungus Pseudomonas sp. Pseudomonic acid D sodium is used as an analytical standard to aid in the identification of pseudomonic acid A and its metabolites. Pseudomonic acid D sodium can be synthesized by reacting 2-chloro-4-nitrobenzene with sodium bisulfate. The synthesis proceeds through a sequence of three reactions, namely nucleophilic substitution, electrophilic substitution, and hydrolysis. The structure of pseudomonic acid D sodium has been confirmed using nuclear magnetic resonance spectroscopy (NMR) and mass spectrometry (MS).
Formula:C26H41NaO9Purity:90%MinMolecular weight:520.59 g/molMonobenzyl fosaprepitant
CAS:Monobenzyl fosaprepitant is a drug product that is used for research and development purposes. It is an impurity standard for the analysis of API (Active Pharmaceutical Ingredient) impurities, which are synthetic products. Monobenzyl fosaprepitant has been shown to be metabolized in vitro. The metabolism studies have shown that this compound can be hydrolyzed by esterases or glucuronidases, oxidized by cytochrome P450 enzymes, reduced by glutathione reductase, or conjugated with glucuronic acid. Monobenzyl fosaprepitant is a high-purity analytical standard and is used as a pharmacopoeia monograph material.
Formula:C30H28F7N4O6PPurity:Min. 95%Molecular weight:704.50 g/molRef: 3D-PKB85202
Discontinued productDesmethyl dehydro lercanidipine
CAS:Desmethyl dehydro lercanidipine is a metabolite of lercanidipine, an antihypertensive agent. Lercanidipine is a dihydropyridine calcium channel blocker that inhibits the influx of calcium ions into cardiac muscle cells and vascular smooth muscle cells. The desmethyl form of lercanidipine has been shown to have anti-inflammatory effects in rats with experimental arthritis. It has also been shown to inhibit the production of inflammatory cytokines in lipopolysaccharide-stimulated human peripheral blood mononuclear cells.
Formula:C35H37N3O6Purity:Min. 95%Molecular weight:595.70 g/molRef: 3D-UUB22697
Discontinued productTianeptine ethyl ester
CAS:Tianeptine is a drug product that belongs to the group of antidepressants. It is metabolized by cytochrome P450 enzymes in the liver and excreted in urine. Tianeptine ethyl ester is used as an analytical reference standard for the tianeptine content of HPLC samples. The CAS number for tianeptine ethyl ester is 66981-77-9.
Formula:C23H29ClN2O4SPurity:Min. 95%Molecular weight:465.00 g/molRef: 3D-RCA98177
Discontinued productImiloxan hydrochloride
CAS:Imiloxan hydrochloride is a diagnostic agent that is used to diagnose Parkinson's disease and other neurological disorders. Imiloxan hydrochloride has been shown to increase dopamine levels in the brain and improve symptoms of Parkinson's disease. Imiloxan hydrochloride inhibits the glucuronidation of dopamine, which leads to an increase in neurotransmitter levels. This drug also has a pain-relieving effect by increasing norepinephrine levels and blocking the reuptake of serotonin. Imiloxan hydrochloride is a prodrug that is metabolized into methyl-d-aspartate and norepinephrine through conjugation with fatty acids and esters.
Formula:C14H17ClN2O2Purity:Min. 95%Molecular weight:280.75 g/molRef: 3D-GDA16722
Discontinued product6-Desmethyl-6-methylhydroxy etoricoxib N1-oxide
CAS:6-Desmethyl-6-methylhydroxy etoricoxib N1-oxide is a high purity drug product. It is an analytical standard used in the study of metabolism and in the development of drugs. This compound has been custom synthesized for use as an impurity standard for HPLC analysis of etoricoxib. 6DMHETO was synthesized to be used as a drug development research and development tool for the pharmaceutical industry, specifically for niche markets such as herbal supplements and dietary supplements.
Formula:C18H15ClN2O4SPurity:Min. 95%Molecular weight:390.80 g/molRef: 3D-VXA39408
Discontinued productL-Threo-hex-2-enaric acid 1,4-lactone 6-methyl ester
CAS:L-Threo-hex-2-enaric acid 1,4-lactone 6-methyl ester is a research and development compound. It is a metabolite of the drug product L-Threo-hex-2-enaric acid 1,4-lactone 6-(2,6,6)-trimethyl ester. L-Threo-hex-2-enaric acid 1,4-lactone 6-(2,6,6)-trimethyl ester (LTA) is an impurity in the drug product that is present as a result of its synthesis. LTA is an intermediate compound that can be used to synthesize other drugs or as an analytical reference material.
Formula:C7H8O7Purity:Min. 95%Molecular weight:204.13 g/molRef: 3D-XEA04679
Discontinued productOzagrel impurity III
CAS:Please enquire for more information about Ozagrel impurity III including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formula:C13H16O2Purity:Min. 95%Molecular weight:204.26 g/molRef: 3D-JIA33421
Discontinued productN-Isopropylnoradrenochrome
CAS:N-Isopropylnoradrenochrome is used as a fluorescent substrate for hydroxylamine. It has also been shown to be a useful catalyst for the synthesis of alkali metal hydrazides and to have hypotensive properties. N-Isopropylnoradrenochrome has been used in the synthesis of pharmaceutical preparations, such as migraine prophylaxis, and yields an hydrazone when irradiated with light.
Formula:C11H13NO3Purity:Min. 95%Molecular weight:207.23 g/molRef: 3D-DAA73631
Discontinued productN-Benzyl N-demethyl trimebutine
CAS:N-Benzyl N-demethyl trimebutine is an analytical standard that is used in the development of new drugs. It is a synthetic compound and has not been found in any natural sources. The CAS number for this compound is 1329834-94-7, and it can be purchased as an impurity standard or as a custom synthesis. N-Benzyl N-demethyl trimebutine has two impurities: benzyl alcohol and demethyltrihexyphenidyl. This compound can be used as a pharmacopoeia or HPLC standard.
Formula:C28H33NO5Purity:Min. 95%Molecular weight:463.6 g/molRef: 3D-EDC83494
Discontinued productrac-Pregabalin N-acrylamide
CAS:Pregabalin is an anticonvulsant drug that is used to treat epilepsy, neuropathic pain, and generalized anxiety disorder. It binds to the alpha2-delta subunit of voltage-gated calcium channels and regulates neurotransmitter release. Racemic pregabalin N-acrylamide (Rac-Preg) is a racemic mixture of two enantiomers, S(-)Pregabalin and R(+)Pregabalin. It has been shown to be an analytical standard in HPLC analysis by virtue of its purity and stability. Rac-Preg has been demonstrated as a metabolite of racemic pregabalin in humans and rats. Rac-pregabalin N-acrylamide can be synthesized from the corresponding amine using acylation with acrylic acid chloride followed by hydrolysis with sodium methoxide in methanol.
Formula:C11H19NO3Purity:Min. 95%Molecular weight:213.27 g/molRef: 3D-VJC84428
Discontinued productRoxithromycin impurity E
CAS:Roxithromycin impurity E is a metabolite of roxithromycin. It is a yellow powder with a melting point of about 130°C and a molecular weight of 226.14g/mol. Roxithromycin impurity E has been shown to be an inhibitor of CYP3A4 and CYP2D6, as well as an inducer of CYP1A2. This impurity can be used for the research and development of roxithromycin, as well as production of analytical standards for HPLC analysis.
Formula:C40H74N2O15Purity:Min. 95%Molecular weight:823.02 g/molN-[2-[(8R)-1,6,7,8-Tetrahydro-6-oxo-2H-indeno[5,4-b]furan-8-yl]ethyl]propanamide
CAS:N-[2-[(8R)-1,6,7,8-Tetrahydro-6-oxo-2H-indeno[5,4-b]furan-8-yl]ethyl]propanamide is a synthetic compound that has not been identified in nature. It is used for analytical purposes and as an impurity standard in the synthesis of other compounds. N-[2-[(8R)-1,6,7,8-Tetrahydro-6-oxo-2H-indeno[5,4-b]furan-8-yl]ethyl]propanamide is the parent drug product of CAS No. 896736–22–4. The impurities found in this product are N-[2-(3′-(3″S″)-3′′S″′) (3″R″) -1H -indenyl](methyl)amine hydrochloride and N-[
Formula:C16H19NO3Purity:Min. 95%Molecular weight:273.33 g/molRef: 3D-WKB73622
Discontinued product1-Benzyl-4-methylpiperidin-3-ol 4-methylbenzenesulfonate
CAS:Please enquire for more information about 1-Benzyl-4-methylpiperidin-3-ol 4-methylbenzenesulfonate including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formula:C20H27NO4SPurity:Min. 95%Molecular weight:377.5 g/molRef: 3D-TUA04020
Discontinued productEnalaprilat tert-butyl ester
CAS:Enalaprilat tert-butyl ester is a synthetic compound and impurity standard used in the synthesis of drug product. Enalaprilat tert-butyl ester is also a metabolite of enalapril, an angiotensin-converting enzyme (ACE) inhibitor used in the treatment of hypertension, congestive heart failure, and diabetic nephropathy. Enalaprilat tert-butyl ester has been shown to have pharmacological effects similar to those of enalapril.
Formula:C22H32N2O5Purity:Min. 95%Molecular weight:404.5 g/molRef: 3D-ZBB79629
Discontinued productEsomeprazole Impurity Q
Esomeprazole Impurity Q is a drug product. It is an impurity standard of esomeprazole, CAS No. 131428-60-1, which is used in the development of drugs and as an analytical reagent. It is synthesized from natural materials and has a purity of 99%. The metabolite can be found in animal and human metabolism studies. Esomeprazole Impurity Q is used for niche purposes such as HPLC standards, analytical reagents, or pharmacopoeia reference substances.
Purity:Min. 95%Quinidine methiodide
CAS:Quinidine is a drug that has been used in the treatment of cardiac arrhythmias and as an antiarrhythmic. It is an uncharged compound that can cross cell membranes by passive diffusion. Quinidine binds to the sodium ion channel, which is the pore through which sodium ions enter the cell, and causes it to close, thereby preventing them from entering the cell. This leads to decreased conductance of nerve impulses and a decrease in membrane potential. The effectiveness of quinidine is dependent on its concentration and on the duration of exposure to this drug.
Formula:C21H27IN2O2Purity:Min. 95%Molecular weight:466.4 g/molRef: 3D-SBA98287
Discontinued productAmlodipine besilate impurity D
CAS:Amlodipine besilate impurity D is a diluent, additive, and stabilizer. It is used in the formulation of pharmaceuticals and other products to prevent particle agglomeration, maintain stability and provide uniformity. Amlodipine besilate impurity D is also used to manufacture bulk density stable pharmaceutical compositions that are suitable for hplc analysis. This product contains magnesium hydroxide as an impurity.
Formula:C20H23ClN2O5Purity:Min. 95%Molecular weight:406.86 g/molDesfluoro impurity
CAS:Desfluoro impurity is a drug product that is an analytical standard for the identification of impurities in API. It is a natural, synthetic, and custom synthesis impurity with CAS 915087-16-0. This product is used for drug development, research and development, and niche applications. Desfluoro impurity is also an HPLC standard and has pharmacopoeia purity.
Formula:C21H17F3N4O2SPurity:Min. 95%Color and Shape:PowderMolecular weight:446.45 g/molRef: 3D-ID181063
Discontinued productBenz[A]anthracene-7-chloromethane-13C
CAS:Please enquire for more information about Benz[A]anthracene-7-chloromethane-13C including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formula:C19H13ClPurity:Min. 95%Molecular weight:277.7 g/molRef: 3D-RFC05460
Discontinued product2-[2-[4-(5,5-Dioxidodibenzo[b,f][1,4]thiazepin-11-yl)-1-piperazinyl]ethoxy]ethanol
CAS:Quetiapine is a drug that belongs to the class of sulfoxides. It is usually administered orally, but can also be given intravenously or intramuscularly. Quetiapine has been studied for its clinical use in the treatment of schizophrenia and bipolar disorder. The plasma concentrations of quetiapine are determined by high-performance liquid chromatography (HPLC) with tandem mass spectrometry (LC-MS/MS) detection. Validation studies have shown that the HPLC-MS/MS method is accurate and precise, with good linearity over a range of concentrations. Analysis was performed on plasma samples from healthy volunteers who were administered either 2 mg or 10 mg doses of quetiapine by intravenous injection. Concentrations were calculated and compared to those found in patients with schizophrenia and bipolar disorder who had been given oral doses of 300 mg per day for four weeks, yielding a therapeutic plasma concentration range from 100 to 300 ng/mL.
Formula:C21H25N3O4SPurity:Min. 95%Molecular weight:415.51 g/molCarbidopa 4-phosphate trihydrate
CAS:Please enquire for more information about Carbidopa 4-phosphate trihydrate including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formula:C10H21N2O10PPurity:Min. 95%Molecular weight:360.25 g/molRef: 3D-HBD68607
Discontinued producto-Acetyl silodosin
CAS:O-Acetyl silodosin is a synthetic, natural metabolite of silodosin. It is a nicotinic acid derivate that inhibits the activity of phosphodiesterase type 5 (PDE5) and has been used as a research and development standard for PDE5 inhibitors. O-Acetyl silodosin is an impurity in the commercial drug product, Silodosin®.
Formula:C27H34F3N3O5Purity:Min. 95%Molecular weight:537.60 g/molRef: 3D-KGA97086
Discontinued product4,6-Dimethoxy-β-methyl-3-phenoxy ambrisentan
CAS:Controlled Product4,6-Dimethoxy-β-methyl-3-phenoxy ambrisentan is a synthetic drug with a high purity and pharmacopoeia. It belongs to the group of drugs called prostanoids, which are lipid molecules that act as hormones. 4,6-Dimethoxy-β-methyl-3-phenoxy ambrisentan is used in research and development for the treatment of pulmonary arterial hypertension. It is an impurity standard for HPLC analysis. This compound can be custom synthesized for drug product research and development. Metabolism studies have been conducted on this compound. The metabolites have been identified as 4,6-dimethoxy-(E)-2-[(E)-2-(4'-methylbenzylidene)ethenyl]-3-[(Z)-1-(4'-methylbenzylidene)ethenyl]ambrinol (M1), 4,6-dimethoxy-(E)-Formula:C22H22N2O6Purity:Min. 95%Molecular weight:410.4 g/molRef: 3D-JGA30803
Discontinued productrac-Norphenylephrine hydrochloride
CAS:Controlled ProductRacemic norphenylephrine hydrochloride is a sympathomimetic amine. It is the racemic mixture of two enantiomers: (+)-noradrenaline and (-)-isopropyladrenaline. Racemic norphenylephrine hydrochloride has been shown to have antimicrobial activity by inhibiting bacterial growth, as well as being effective in treating autoimmune diseases and chronic oral disorders such as constipation. Racemic norphenylephrine hydrochloride can also be used for the treatment of cardiac diseases, including chronic heart failure, coronary artery disease, or hypertension. In addition, Racemic norphenylephrine hydrochloride can be used to treat detrusor muscle dysfunction (e.g., urinary incontinence).
Formula:C8H12ClNO2Purity:Min. 95%Molecular weight:189.64 g/molRef: 3D-IN27563
Discontinued productTrazodone Impurity A
CAS:Trazodone Impurity A is a drug product that is an impurity standard for Trazodone. It has been classified as a synthetic metabolite and is used in analytical research studies. Trazodone Impurity A has demonstrated niche applications in the pharmaceutical industry, including metabolism studies, pharmacopoeia requirements, and HPLC standards.
Formula:C19H22ClN5OPurity:Min. 95%Molecular weight:371.86 g/molAlloc bromoridane
CAS:Alloc bromoridane is a drug product that contains the active ingredient bromoridane. Bromoridane is a natural metabolite of the plant alkaloid berberine and has been shown to inhibit the activity of bacterial type IIA topoisomerases from both Gram-positive and Gram-negative bacteria. The chemical name for Alloc bromoridane is 2-[2-(4-bromobenzoyl)phenyl]dihydropyrimidine, and it has CAS number 117348-70-6. Bromoridane is an impurity standard in pharmacopoeias such as USP XXII, European Pharmacopoeia 6th Edition, Japanese Pharmacopoeia 2006, and Chinese Pharmacopoeia 2005. Alloc bromoridane is used in research and development for pharmaceuticals or as an analytical reference material.
Formula:C13H20BrNO4Purity:Min. 95%Molecular weight:334.21 g/molRef: 3D-SEA34870
Discontinued productm-Glimepiride impurity
CAS:m-Glimepiride impurity is a chemical substance that belongs to the sulfonylurea family. It is used as a pharmaceutical agent for the treatment of type 2 diabetes. The impurity was found in crystalline form and analyzed by HPLC-DAD and HPLC-MS. The purity of m-Glimepiride impurity was determined to be 99%. It is not known whether this impurity has any biological activity.
Formula:C24H34N4O5SPurity:Min. 95%Molecular weight:490.62 g/molHydrocotarnine hydrochloride
CAS:Hydrocotarnine hydrochloride is a medicinal compound that has been found to have anticancer properties. It is an inhibitor of protein kinases, which are enzymes that play a key role in regulating cell cycle progression and apoptosis. Hydrocotarnine hydrochloride has been shown to induce apoptosis in cancer cells, making it a promising candidate for the development of novel cancer therapies. This compound has also been identified as a potential inhibitor of tumor growth in Chinese medicine. In vitro studies have demonstrated that hydrocotarnine hydrochloride inhibits the proliferation of various cancer cell lines, suggesting its potential as a therapeutic agent for the treatment of cancer.
Formula:C12H16ClNO3Purity:Min. 95%Molecular weight:257.71 g/molRef: 3D-FAA98555
Discontinued productCyamemazine sulfoxide
CAS:Cyamemazine sulfoxide is a histamine H1 receptor antagonist. It has been shown to have strong affinity for the serotonin 5-HT2C and dopamine D2 receptors, as well as the atrial 5-HT2A receptors. Cyamemazine sulfoxide has a low oral bioavailability of about 10% and is metabolized in the liver to cyamemazine and its active form, cyamemazine sulfoxide. Cyamemazine sulfoxide binds to serotonin 5-HT2C receptors with a high affinity, which leads to inhibition of serotonin release from nerve endings in the brain. This drug also inhibits dopamine release from nerve endings in the brain and has been shown to have cardiac effects on heart rate and contractility.
Formula:C19H21N3OSPurity:Min. 95%Molecular weight:339.46 g/molGbr 12935 dimaleate
CAS:Gbr 12935 dimaleate is a research and development impurity standard. It is a synthetic, high purity, pharmacopoeia drug product. The CAS number for Gbr 12935 dimaleate is 1349767-56-1. Gbr 12935 dimaleate is used in Drug Development and Metabolism studies as an analytical standard. This compound is also used as a natural metabolite in HPLC standards.
Formula:C32H38N2O5Purity:Min. 95%Color and Shape:PowderMolecular weight:530.7 g/molRef: 3D-ZDC76756
Discontinued productTiotropium EP Impurity I
CAS:Tiotropium EP Impurity I is an impurity found in the API, Tiotropium EP. It is a natural product that is synthesized by chemical synthesis. The synthetic purity of Tiotropium EP Impurity I is high and complies with pharmacopoeia guidelines. This impurity can be used as a standard to test the quality of other products or to research the metabolism of Tiotropium EP.
Formula:C19H22BrNO4S2Purity:Min. 95%Molecular weight:472.40 g/molRef: 3D-LFA52148
Discontinued product7-O-methyl ivermectin B1a
7-O-methyl ivermectin is a drug product that is an analytical standard for the impurity 7-O-methyl ivermectin B1a. Impurity 7-O-methyl ivermectin B1a is a natural API that is found in the synthesis of Ivermectin. It has a CAS number of 90589-08-4 and is produced through custom synthesis. This impurity can be used as an analytical standard for HPLC methods, such as high purity and pharmacopoeia grade. 7-O-methyl ivermectin B1a has shown to have little or no activity against bacteria, fungi, or parasites.
Purity:Min. 95%Ref: 3D-IO167868
Discontinued productcis-Tadalafil
CAS:Cis-Tadalafil is a potent inhibitor of phosphodiesterase 5, which is used to treat erectile dysfunction (ED) and primary pulmonary hypertension (PPH). It works by increasing blood flow to the penis, allowing men with ED to achieve and maintain an erection. Cis-Tadalafil is also used to treat symptoms of prostatic hyperplasia (enlarged prostate) in men. This drug has been shown to be effective in treating PPH by reducing pulmonary arterial pressure and improving exercise capacity. Cis-Tadalafil belongs to the carboline class of drugs and is a phosphodiesterase 5 inhibitor that selectively inhibits cGMP-specific phosphodiesterase type 5 (PDE5). This drug has been shown to be highly effective in treating both ED and PPH with minimal side effects.
Formula:C22H19N3O4Purity:Min. 95%Color and Shape:White/Off-White SolidMolecular weight:389.4 g/molLinagliptin impurity G
CAS:Linagliptin impurity G is an impurity in the drug product Linagliptin. It is a natural substance and its CAS number is 668270-11-9. Impurity G can be synthesized from L-phenylalanine and cyclohexane carboxaldehyde in a two step process. The first step involves the reaction of L-phenylalanine with cyclohexane carboxaldehyde to yield methylcyclohexanecarboxylate, which then undergoes hydrolysis to give phenylcyclohexanol. In the second step, phenylcyclohexanol reacts with hydrochloric acid to produce phenylcyclohexanone, which is then oxidized with hydrogen peroxide to yield impurity G. Impurity G can also be found in the pharmacopoeia as a high purity HPLC standard for linagliptin.
Formula:C25H28N8O2Purity:Min. 95%Color and Shape:PowderMolecular weight:472.54 g/molRocuronium Bromide EP Impurity F Bromide
CAS:Rocuronium Bromide EP Impurity F Bromide is an impurity found in Rocuronium Bromide EP. It is a natural component of the drug product, which is a synthetic drug. The metabolite of this impurity is also found in the natural product, although at much lower concentrations. This impurity has been shown to be present as an analytical impurity in the API and custom synthesis process. This impurity standard has been synthesized synthetically for use in drug development and research and development, as well as for use in HPLC standards.Formula:C34H55N2O4·BrPurity:Min. 95%Molecular weight:635.72 g/molCiprofloxacin ep impurity C
CAS:Ciprofloxacin ep impurity C is a synthetic compound. It is used as a research and development standard in the synthesis of ciprofloxacin. The purity of this compound is high, and it has been tested for metabolism studies. This impurity can be detected by HPLC using an analytical method with a natural reference substance. This impurity has not been evaluated for pharmacopoeia or CAS number.
Formula:C15H16FN3O3Purity:Min. 95%Molecular weight:305.30 g/molRef: 3D-DEA22212
Discontinued productAcarbose Impurity E
CAS:Acarbose Impurity E is an impurity found in acarbose. It is a natural, API impurity and is a synthetic impurity standard. Acarbose Impurity E has been used in drug development research and development, as well as in the HPLC analysis of acarbose to generate a pharmacopoeia-grade purity standard.
Purity:Min. 95%N-Nitroso dorzolamide
N-Nitroso dorzolamide is a chemical compound used as an intermediate in the synthesis of dorzolamide, a carbonic anhydrase inhibitor used in the treatment of glaucoma and ocular hypertension.
Formula:C10H15N3O5S3Purity:Min. 95%Color and Shape:PowderMolecular weight:353.44 g/molRoflumilast Impurity A
CAS:Roflumilast impurity A is a metabolite of roflumilast. It is a drug product that is used as an analytical standard for the determination of roflumilast in HPLC analysis. Roflumilast impurity A is not natural and is synthetic. It has been shown to be a substrate for CYP1A2, CYP2C8, CYP2C9, and CYP3A4 enzymes. Studies have shown that it may be involved in the metabolism of roflumilast through hydroxylation and deamination.
Formula:C16H14Cl2N2O3Purity:Min. 95%Molecular weight:353.2 g/molPramipexole EP Impurity C
CAS:Pramipexole EP Impurity C is a synthetic impurity that is used as an impurity standard in the manufacture of Pramipexole EP. It is also used as a research and development tool for drug product, custom synthesis, CAS No. 1973461-14-1, and analytical studies. This compound has been shown to be a metabolite of Pramipexole EP and may have pharmacological properties. Pramipexole EP Impurity C has been found to inhibit the growth of certain bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA) isolates.
Formula:C20H32N6S2Purity:Min. 95%N-Desacetyl thiocolchicoside
CAS:N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.
Formula:C25H31NO9SPurity:Min. 95%Molecular weight:521.58 g/molRef: 3D-CHA99181
Discontinued productN-Benzyl albuterol
CAS:N-Benzyl albuterol is a drug product that is custom synthesized to be of high purity with an analytical standard. It is used in research and development, pharmaceutical development, and as a pharmacopoeia or analytical standard. N-Benzyl albuterol has been found to be a metabolite of the drug product Albuterol Sulfate. It is also used in metabolism studies and natural product research. The CAS number for this compound is 24085-03-8.
Formula:C20H27NO3Purity:Min. 95%Molecular weight:329.4 g/molOxacyclohexane open ring tacrolimus
CAS:Please enquire for more information about Oxacyclohexane open ring tacrolimus including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formula:C44H71NO13Purity:Min. 95%Molecular weight:822.04 g/molPiperacilloic acid
CAS:Piperacilloic acid is a synthetic compound that exhibits antibacterial activity. It has been shown to be effective against human pathogens, including urothelial carcinoma and human serum. Piperacilloic acid binds to the amino acids lysine and arginine in bacterial proteins and inhibits protein synthesis by inhibiting the function of enzymes that require these amino acids for their activity. The potency of piperacillin is low, but it is activated by hydrolysis in the acidic environment of the stomach or intestinal tract. Piperacilloic acid also has potential as a contraceptive agent because it may inhibit transcriptional regulation of genes that are involved in sperm production.
Formula:C23H29N5O8SPurity:(Elemental Analysis) Min. 90 Area-%Color and Shape:PowderMolecular weight:535.57 g/molTerbinafine dihydrochloride
CAS:Terbinafine is a drug used in the treatment of onychomycosis, tinea versicolor and dandruff. It belongs to the group of medicines known as antifungals and inhibits the growth of fungi by inhibiting their ability to make proteins. Terbinafine dihydrochloride is a form of terbinafine that is more soluble in water than terbinafine hydrochloride and can be used as a lubricant. Terbinafine hydrochloride is an industrial product that is used as a disintegrant in tablets and capsules.
Formula:C36H40N2Purity:Min. 95%Molecular weight:500.7 g/molRef: 3D-JMB36523
Discontinued product(S)-Rabeprazole sodium
CAS:(S)-Rabeprazole sodium is an anticancer drug that acts as a kinase inhibitor. It is an analog of Rabeprazole and has been shown to inhibit the growth of cancer cells in vitro and in vivo. (S)-Rabeprazole sodium inhibits the activity of kinases, which are enzymes that play a key role in cell signaling pathways. This inhibition leads to apoptosis, or programmed cell death, in cancer cells. (S)-Rabeprazole sodium has been tested against various types of cancer, including Chinese hamster ovary cells and tumor xenografts in mice. It has also been shown to inhibit elastin degradation, which is important for preventing metastasis of cancer cells. (S)-Rabeprazole sodium may be a promising candidate for the development of new anticancer drugs that target specific kinases and proteins involved in cancer cell growth and survival.
Formula:C18H21N3O3S•NaPurity:Min. 95%Molecular weight:382.43 g/molRef: 3D-IR183125
Discontinued productN-Hydroxymethyl Sumatriptan
CAS:N-Hydroxymethyl Sumatriptan is an analytical standard and a research and development impurity. It is also used as an API impurity in drug product manufacturing. N-Hydroxymethyl Sumatriptan can be synthesized by reacting the parent drug with hydroxyl radicals, which is a process that yields no side products. N-Hydroxymethyl Sumatriptan can be found in the following pharmacopoeia: United States Pharmacopoeia (USP) 11>, European Pharmacopoeia (EP), Japanese Pharmacopoeia (JP)13>, British Pharmacopoeia (BP), and Chinese Pharmacopiae (CPC).
Formula:C15H23N3O3SPurity:Min. 95%Molecular weight:325.43 g/mol(4-Chlorophenyl)diphenylmethanol
CAS:Please enquire for more information about (4-Chlorophenyl)diphenylmethanol including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formula:C19H15ClOPurity:Min. 95%Molecular weight:294.8 g/molRef: 3D-GAA92289
Discontinued productSacubitril Impurity 2
CAS:Sacubitril Impurity 2 is a drug product that is an analytical impurity in Sacubitril. This impurity can be found in Sacubitril as a result of natural processes or as an API impurity during the synthesis process. Sacubitril Impurity 2 has been shown to have activity in Metabolism studies, Natural, and Custom synthesis. It has been shown to be a Synthetic impurity standard and HPLC standard. Sacubitril Impurity 2 is used for research and development purposes for the drug development industry, specifically for the niche market. It is also used as an analytical standard for pharmacopoeia methods.
Formula:C24H27NO4Purity:Min. 95%Molecular weight:393.48 g/mol3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride
CAS:3-Dimethylaminopropyl-2-benzylaminobenzoate hydrochloride is a versatile compound with various characteristics and applications. It has been found to have diverse effects on different biological processes. This compound has shown potential as an antimuscarinic agent, which means it can block the action of acetylcholine at muscarinic receptors in the body.
Formula:C19H25ClN2O2Purity:Min. 95%Molecular weight:348.9 g/molRef: 3D-WMD18565
Discontinued product(3S,4R)-Tofacitinib
CAS:(3S,4R)-Tofacitinib is a rhombic and paramagnetic compound with a Curie point of approximately 10.6°C. It is soluble in nonpolar solvents such as benzene and toluene. (3S,4R)-Tofacitinib has been shown to have magnetic properties that are dependent on the temperature and the frequency of the applied magnetic field. The paramagnetic resonance spectra were observed at 18°C and 32°C, while the paramagnetic resonance spectrum was observed at -2°C. The octahedral interactions are likely due to the presence of six different types of iron ions in the crystal structure.
Formula:C16H20N6OPurity:Min. 95%Molecular weight:312.37 g/molTofacitinib dihydro impurity
CAS:Tofacitinib dihydro impurity is a research and development impurity standard for the synthesis of Tofacitinib. It is a custom synthesis with high purity, pharmacopoeia grade, and synthetic. This product is also used in drug development for metabolism studies and analytical applications.
Formula:C16H22N6OPurity:Min. 95%Molecular weight:314.39 g/molSimvastatin acid
CAS:Simvastatin acid is the active form of simvastatin, a drug used to lower blood cholesterol levels. Simvastatin acid inhibits HMG-CoA reductase, the enzyme that converts HMG-CoA to mevalonate. This conversion is a rate-limiting step in the synthesis of cholesterol and other lipids. Simvastatin acid binds to polymerase chain and drug transporter proteins, which leads to cell lysis. The concentration–time curve for simvastatin acid is linear and the half-life is approximately 12 hours. When simvastatin acid is administered with drugs that are potent inducers of CYP3A4 or UGT1A1 enzymes, there may be an increased risk for drug interactions. Simvastatin acid has shown no significant human pharmacokinetic interactions with food or grapefruit juice at doses up to 200 mg/day. There are limited data on the pharmacokinetics of simvastatin
Formula:C25H40O6Purity:Min. 95%Color and Shape:White PowderMolecular weight:436.58 g/molRef: 3D-IS63828
Discontinued productDicyclopropylamine hydrochloride
CAS:Dicyclopropylamine hydrochloride is a tyrosine kinase inhibitor that blocks the activity of jak2. It is an innovative molecule with the potential to be used in cancer treatment. Dicyclopropylamine hydrochloride has been shown to inhibit activation of tyrosine kinases, which are involved in cell signaling and proliferation. Dicyclopropylamine hydrochloride also has anti-inflammatory properties, which may be due to its ability to inhibit prostaglandin synthesis. This drug is not expected to have any toxicity or side effects because it can be easily metabolized by the liver.br>br> Dicyclopropylamine hydrochloride is a white solid with a melting point of 175°C. It has no detectable odor, and it is soluble in water and ethanol. The impurities found in this compound include myristic acid and amines, which can cause inflammatory diseases.br>br> D
Formula:C6H11N•HClPurity:Min. 95%Color and Shape:PowderMolecular weight:133.62 g/molRef: 3D-FD141573
Discontinued product2-(2-Amino-5-bromobenzoyl)pyridine
CAS:2-(2-Amino-5-bromobenzoyl)pyridine (2ABBP) is a chemical compound with the molecular formula C10H7BrN3. It is a glucuronide conjugate of 2-amino-5-bromobenzoic acid and has been used as an immunological reagent in the form of a monoclonal antibody. 2ABBP binds to dryopteris, which is a plant species that contains polyphenols called pteridines. 2ABBP has been shown to have anti-inflammatory properties in rat liver microsomes and cell culture experiments. The mechanism of action may involve inhibition of cyclooxygenase enzymes, which are involved in prostaglandin synthesis. 2ABBP also binds to human serum albumin and chaperones, proteins that bind other proteins or small molecules. The biological activity of 2ABBP may be due to its ability to form coval
Formula:C12H9BrN2OPurity:Min. 95%Molecular weight:277.12 g/molEmpagliflozin S-furanose
CAS:Empagliflozin S-furanose is a Custom synthesis drug product. It is an analytical standard with CAS No. 1620758-32-8, and it is used in research and development of new drugs. Empagliflozin S-furanose has been found to be a metabolite of empagliflozin, a drug that is used to treat type 2 diabetes mellitus. It is also used as an impurity standard for HPLC analysis of empagliflozin because it does not have any biological activity.
Formula:C23H27ClO7Purity:Min. 95%Color and Shape:PowderMolecular weight:450.91 g/molRef: 3D-IE181148
Discontinued productIvermectin impurity I
CAS:Ivermectin impurity I is an analytical standard that is used for pharmacopoeia and custom synthesis. It is a natural metabolite of the drug Ivermectin, which has been shown to have anti-inflammatory properties in mice. Ivermectin impurity I binds to nicotinic acetylcholine receptors, leading to muscle paralysis and death. This compound is found in high purity for research and development purposes.
Formula:C48H74O14Purity:Min. 95%Color and Shape:PowderMolecular weight:875.09 g/molRef: 3D-II167729
Discontinued productDesfluoro ezetimibe
CAS:Desfluoro ezetimibe is a synthetic cholesterol-lowering drug that inhibits intestinal cholesterol absorption. It is chemically synthesized, and the process includes the introduction of fluorine at the 3-position of the C-ring. Desfluoro ezetimibe is not metabolized in humans, but it may be subject to oxidative degradation. The product is also subject to oxidation by light and air, which may result in formation of impurities. The drug substance has been validated as well as its isomers and efficiencies in mass spectrometry detection.
Formula:C24H22FNO3Purity:Min. 95%Color and Shape:White To Off-White SolidMolecular weight:391.43 g/molChlorthalidone impurity E
CAS:Chlorthalidone impurity E is an analytical standard for the HPLC analysis of chlorthalidone in pharmaceutical drug products and is a metabolite of chlorthalidone. Chlorthalidone impurity E is an API impurity that can be found in the synthesis of chlorthalidone, and it has been detected as a minor component in certain drug products. It is important to have an accurate specification for this compound, since it can affect the pharmacological properties of the drug product. The purity level of this compound must be at least 98% or greater to ensure that there are no contaminants present. This compound is also a metabolite of chlorthalidone and is used as a pharmacopoeia reference substance for testing equipment calibration.END>
Formula:C14H11ClN2O3SPurity:Min. 95%Molecular weight:322.77 g/molRef: 3D-IC76330
Discontinued productTriethylene glycol flufenamate
CAS:Etofenamate impurity
Formula:C20H22F3NO5Purity:Min. 95%Color and Shape:Clear LiquidMolecular weight:413.39 g/molRef: 3D-IT58094
Discontinued productD-6-Cyano-6-norlysergic acid methyl ester
CAS:Please enquire for more information about D-6-Cyano-6-norlysergic acid methyl ester including the price, delivery time and more detailed product information at the technical inquiry form on this page
Formula:C17H15N3O2Purity:Min. 95%Molecular weight:293.32 g/molRef: 3D-FBA33404
Discontinued productGS 441524 triphosphate
CAS:Triphosphorylated form of an antiviral nucleoside analog with activity against zoonotic feline infectious peritonitis virus (FIPV) and severe acute respiratory syndrome (SARS) virus from Coronaviridae family. The compound is the biologically active form of the GS 441524 prodrug and being triphosphorylated, it competes with natural nucleoside triphosphates in cells and interferes with viral RNA synthesis. Made to order.
Formula:C12H12N5O13P3·4NaPurity:(31P-Nmr) Min. 95 Area-%Color and Shape:White PowderMolecular weight:531.20 g/molRef: 3D-FG167050
Discontinued productAtorvastatin calcium trihydrate EP Impurity G
CAS:Atorvastatin is a drug that belongs to the class of statins. It is used for the treatment of high cholesterol levels and other related diseases, such as cardiovascular disease. Atorvastatin calcium trihydrate EP Impurity G is an impurity that may be present in atorvastatin calcium trihydrate. This compound has not been found to have any pharmacological activity.
Formula:C34H37FN2O5Purity:Min. 95%Color and Shape:PowderMolecular weight:572.67 g/mol
