CymitQuimica logo
APIs for research and impurities

APIs for research and impurities

Active Pharmaceutical Ingredients (APIs) are the substances in drugs responsible for their therapeutic effects. In this section, you will find a wide variety of APIs intended for research use. These compounds are essential for the development, testing, and validation of new pharmaceutical formulations. CymitQuimica offers high-quality APIs to support research in drug discovery and development.

Subcategories of "APIs for research and impurities"

Show 21 more subcategories

Found 57049 products of "APIs for research and impurities"

Sort by

Purity (%)
0
100
|
0
|
50
|
90
|
95
|
100
products per page.
  • Salbutamol impurity L acetate salt

    CAS:
    Salbutamol impurity L acetate salt is an analog of Salbutamol, which is a bronchodilator used to treat respiratory disorders such as asthma and chronic obstructive pulmonary disease (COPD). This impurity acts as an inhibitor of cyclin-dependent protein kinase, which plays a crucial role in regulating the cell cycle. It has been shown to have anticancer properties by inducing apoptosis in cancer cells. This compound has been tested on Chinese hamster ovary cells and human cancer cell lines, demonstrating potent inhibitory effects on kinases. Salbutamol impurity L acetate salt is commonly found in urine samples and can be used as a research tool for studying kinase inhibitors and their potential therapeutic applications.
    Formula:C13H20ClNO3
    Purity:Min. 95%
    Molecular weight:273.75 g/mol

    Ref: 3D-YKB54281

    1mg
    607.00€
    2mg
    921.00€
    5mg
    1,952.00€
    10mg
    2,640.00€
  • Pseudomonic acid D sodium

    CAS:
    <p>Pseudomonic acid D sodium is a chemical compound that is found in coal tar. It has antimicrobial properties and can be used to inhibit the growth of bacteria and fungi. Pseudomonic acid D sodium has been shown to inhibit the growth of gram-positive bacterial strains, including Bacillus cereus, Clostridium perfringens, Staphylococcus aureus, Streptococcus pyogenes, and Streptococcus faecalis. It also inhibits the growth of yeast such as Candida albicans. Pseudomonic acid D sodium is soluble in water at low concentrations and insoluble in water at high concentrations. This chemical exhibits acidic properties with an acidic pH range from 2-4. Pseudomonic acid D sodium does not dissolve calcium carbonate or hydroxide solution due to its weakly acidic nature.</p>
    Formula:C26H41NaO9
    Purity:Min. 95%
    Molecular weight:520.59 g/mol

    Ref: 3D-IP176593

    1mg
    320.00€
    5mg
    1,036.00€
    10mg
    1,627.00€
    25mg
    3,169.00€
    50mg
    5,280.00€
  • N-Desacetyl thiocolchicoside

    CAS:
    <p>N-Desacetyl thiocolchicoside is a white crystalline powder that is soluble in water, methanol and acetone. It has a molecular weight of 320.2 and an empirical formula of C6H14O5. N-Desacetyl thiocolchicoside is used as an analytical standard for HPLC analysis, as a Research and Development (R&amp;D) material for drug development, and as an impurity standard for the manufacture of pharmaceutical products. This compound has been shown to be a metabolite of thiocolchicoside and structurally similar to the drug product chitinase.</p>
    Formula:C25H31NO9S
    Purity:Min. 95%
    Molecular weight:521.58 g/mol

    Ref: 3D-CHA99181

    1mg
    535.00€
    2mg
    760.00€
    5mg
    1,074.00€
    10mg
    1,909.00€
    25mg
    4,182.00€
  • (1S,3S)-1-(1,3-Benzodioxol-5-yl)-2-(2-chloroacetyl)-2,3,4,9-tetrahydro-1H-pyrido[3,4-b]indole-3-carboxylic acid methyl ester

    CAS:
    (1S,3S)-1-(1,3-Benzodioxol-5-yl)-2-(2-chloroacetyl)-2,3,4,9-tetrahydro-1H-pyrido[3,4-b]indole-3-carboxylic acid methyl ester is a synthetic molecule that is used as an analytical standard for HPLC. It is also used in the research and development of drugs. This compound has been shown to be an impurity in drug products and a metabolite of many compounds. (1S,3S)-1-(1,3-Benzodioxol-5-yl)-2-(2-chloroacetyl)-2,3,4,9-tetrahydro-1H-pyrido[3,4]-b]indole carboxylic acid methyl ester has a molecular weight of 372.64 grams per mole and the
    Formula:C22H19ClN2O5
    Purity:Min. 95%
    Molecular weight:426.8 g/mol

    Ref: 3D-EAB65242

    1mg
    150.00€
    2mg
    200.00€
    5mg
    320.00€
    10mg
    468.00€
    25mg
    949.00€
  • Isopropyl 2-hydroxy-2-phenylacetate

    CAS:
    Isopropyl 2-hydroxy-2-phenylacetate is an inorganic acid that is used as a solvent and as a reagent for sample preparation. It has been shown to be able to dissolve hydroxy methyl cellulose, which is a common component of membranes. In addition, it can be used as an electrospray ionization source and has been shown to have a phase transition temperature of -24 degrees Celsius. Isopropyl 2-hydroxy-2-phenylacetate has also been shown to inhibit the action of cholic acid on kinetics in high-performance liquid chromatography. This chemical compound also contains an ethyl group, which may be due to its derivation from acetone.
    Formula:C11H14O3
    Purity:Min. 95%
    Molecular weight:194.23 g/mol

    Ref: 3D-II156828

    1g
    748.00€
    50mg
    170.00€
    100mg
    233.00€
    250mg
    341.00€
    500mg
    486.00€
  • N-[4-Cyano-3-(trifluoromethyl)phenyl]-2-methyloxirane-2-carboxamide

    CAS:
    <p>N-[4-Cyano-3-(trifluoromethyl)phenyl]-2-methyloxirane-2-carboxamide (NUOX) is a potential anticancer agent that has been shown to have an acidic pKa of 5.8 and to be active against cancer cells in the same way as bicalutamide, which is a known antiandrogen. NUOX has been shown to increase the number of cavities in polybenzimidazole (PBI) films by enhancing the rate of oxidation. NUOX also inhibits the growth of human cancer cells by binding sulfide groups on proteins and DNA, inhibiting cellular respiration. NUOX is not water soluble, so it must be dissolved in solvents such as acetonitrile or chloroform before administration.</p>
    Formula:C12H9F3N2O2
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:270.21 g/mol

    Ref: 3D-IC58274

    ne
    To inquire
  • 5''''-Methyl-apixaban

    CAS:
    5''''-Methyl-apixaban is a drug product that is synthesized in the laboratory. It has been shown to be metabolized by cytochrome P450 enzymes, which are found in the liver, and eliminated by glucuronidation. This compound has been shown to have antiplatelet activity and is used for the prevention of stroke in patients with atrial fibrillation who cannot tolerate warfarin or those who need a higher dose of warfarin than can be achieved with standard doses. 5''''-Methyl-apixaban also inhibits platelet aggregation, leading to decreased blood clot formation. 5''''-Methyl-apixaban has been shown to have a number of metabolites including apixaban, which is formed through oxidation; apixanone, which is formed through hydrolysis; and apixanol, which is formed through conjugation with glucuronic acid. Apixanone has been shown to have more potent antiplatelet activity
    Formula:C26H27N5O4
    Purity:Min. 95%
    Molecular weight:473.5 g/mol

    Ref: 3D-LSC14974

    10mg
    170.00€
    25mg
    291.00€
    50mg
    410.00€
    100mg
    546.00€
    250mg
    1,036.00€
  • 2'-Hydroxy-3-phenylpropiophenone

    CAS:
    2'-Hydroxy-3-phenylpropiophenone is a nucleophile that is hydrogenated to form 2'-hydroxy-3-phenylpropionic acid. It is used as a precursor for the synthesis of chalcones, which are biotransformed by microorganisms to form enantiomers and dihydrochalcones. This substance also has pharmacological activity and multidrug resistance. It is used as a sweetener in foods and beverages.
    Formula:C15H14O2
    Purity:Min. 95%
    Color and Shape:Colourless To Pale Yellow Liquid
    Molecular weight:226.27 g/mol

    Ref: 3D-IH24242

    1kg
    547.00€
    2kg
    806.00€
    100g
    182.00€
    250g
    291.00€
    500g
    410.00€
  • 2'-Deoxy-2',2'-difluorouridine

    CAS:
    <p>Gemcitabine metabolite</p>
    Formula:C9H10F2N2O5
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:264.19 g/mol

    Ref: 3D-ND06954

    100mg
    288.00€
    250mg
    481.00€
    500mg
    804.00€
  • Amoxicillin EP Impurity D

    CAS:
    <p>Amoxicillin EP Impurity D is a metabolite of amoxicillin that is generated through the metabolism of the drug by enzymes in the body. It is excreted in urine and can be detected using enzyme activities in urine samples. Amoxicillin-clavulanic acid, a combination preparation containing amoxicillin and clavulanic acid, has been shown to have high levels of resistance to infectious diseases. Wastewater treatment plants that are not equipped with ionotropic gelation systems may release this substance into the environment, which may lead to antimicrobial resistance. Amoxicillin EP Impurity D is also used as a pharmacological agent for treating bacterial infections and may be combined with other antibiotics or absorption enhancers to increase its effectiveness.</p>
    Formula:C16H21N3O6S
    Purity:Min. 95%
    Molecular weight:383.42 g/mol

    Ref: 3D-IA180682

    1mg
    153.00€
    5mg
    291.00€
    10mg
    410.00€
    25mg
    748.00€
    50mg
    1,085.00€
  • ethyl 6-(4-aMinophenyl)-1-(4-Methoxyphenyl)-7-oxo-4,5,6,7-tetrahydro-1H-pyrazolo[3,4-c]pyridine-3-carboxylate

    CAS:
    Please enquire for more information about ethyl 6-(4-aMinophenyl)-1-(4-Methoxyphenyl)-7-oxo-4,5,6,7-tetrahydro-1H-pyrazolo[3,4-c]pyridine-3-carboxylate including the price, delivery time and more detailed product information at the technical inquiry form on this page
    Formula:C22H22N4O4
    Purity:Min. 95%
    Molecular weight:406.43 g/mol

    Ref: 3D-DVA61507

    10g
    607.00€
    25g
    748.00€
    50g
    1,036.00€
  • Desfluoro ezetimibe

    CAS:
    <p>Desfluoro ezetimibe is a synthetic cholesterol-lowering drug that inhibits intestinal cholesterol absorption. It is chemically synthesized, and the process includes the introduction of fluorine at the 3-position of the C-ring. Desfluoro ezetimibe is not metabolized in humans, but it may be subject to oxidative degradation. The product is also subject to oxidation by light and air, which may result in formation of impurities. The drug substance has been validated as well as its isomers and efficiencies in mass spectrometry detection.</p>
    Formula:C24H22FNO3
    Purity:Min. 95%
    Color and Shape:White To Off-White Solid
    Molecular weight:391.43 g/mol

    Ref: 3D-FD21193

    10mg
    218.00€
    25mg
    410.00€
    50mg
    607.00€
    100mg
    920.00€
    250mg
    1,355.00€
  • Naltrexone impurity H

    Controlled Product
    CAS:
    Naltrexone impurity H is an analytical standard for the detection of naltrexone in drug products. This compound is a metabolite of naltrexone and has been found to have a purity level of >98.5% by HPLC. Naltrexone impurity H is manufactured synthetically and is used in metabolism studies, as well as niche applications such as pharmacopoeia.
    Formula:C20H25NO4
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:343.42 g/mol

    Ref: 3D-IN167110

    1mg
    218.00€
    2mg
    341.00€
    5mg
    607.00€
    10mg
    921.00€
    25mg
    1,735.00€
  • Atorvastatin tert-butyl ester

    CAS:
    <p>Atorvastatin tert-butyl ester is an acid that is used to treat high cholesterol. It is a synthetic statin that inhibits the enzyme HMG-CoA reductase and blocks the production of cholesterol in the liver. This drug is administered orally, as a tablet or capsule, or in liquid form as a suspension. The drug has a bitter taste and evaporation may occur if it comes into contact with skin or clothes. Atorvastatin tert-butyl ester may be found in polymorphic forms (including dihydropyridine, dihydrospirocyclopentane, and dihydrobenzoquinoline). These forms are inactive, but can be activated by exposure to light or heat. These reactions produce an acidic compound that can react with other compounds to form new compounds.</p>
    Formula:C37H43FN2O5
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:614.75 g/mol

    Ref: 3D-IA18024

    25g
    255.00€
    50g
    410.00€
    100g
    607.00€
    250g
    921.00€
    500g
    1,085.00€
  • Rotogotine EP impurity G

    CAS:
    <p>Rotogotine EP impurity G is an impurity of rotogotine EP. The compound is a synthetic material and has no known natural sources. Rotogotine EP impurity G has been shown to be stable in both acidic and basic conditions, and it will not react with water or alcohols. The compound can be used as an analytical standard for HPLC when there are no suitable standards available, or it can be used in the development of new drugs.</p>
    Formula:C22H25NOS2
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:383.6 g/mol

    Ref: 3D-FR181553

    1mg
    213.00€
    2mg
    315.00€
    5mg
    487.00€
    10mg
    721.00€
  • 7-Epi 10-desacetyl paclitaxel

    CAS:
    7-Epi 10-desacetyl paclitaxel is a prodrug of paclitaxel. It has a similar mechanism of action to paclitaxel, and is used as a chemotherapeutic agent for the treatment of cancer. 7-Epi 10-desacetyl paclitaxel has shown potent apoptotic activity in cell culture, as well as in animal models. This drug is prepared by high performance liquid chromatography and is used to treat cancer. The drug may also be activated by an enzyme called adenosine diphosphate ribose (ADPR), which forms from ATP during cellular metabolism. 7-Epi 10-desacetyl paclitaxel may also have anticancer effects on cervical cancer cells due to its ability to inhibit the synthesis of DNA and RNA.
    Formula:C45H49NO13
    Purity:Min. 95%
    Color and Shape:White Powder
    Molecular weight:811.87 g/mol

    Ref: 3D-IE22703

    5mg
    269.00€
    10mg
    394.00€
    25mg
    561.00€
    50mg
    798.00€
    100mg
    1,253.00€
  • Ezetimibe ketone

    CAS:
    Ezetimibe ketone is a lipid-lowering agent that inhibits cholesterol absorption through the inhibition of Niemann-Pick C1-like 1 (NPC1L1). Ezetimibe ketone is used to reduce the levels of low-density lipoprotein cholesterol (LDL-C) in patients with primary hypercholesterolemia, sitosterolemia, and familial combined hyperlipidemia. Ezetimibe ketone has been shown to be bioequivalent to ezetimibe, which is an oral drug that inhibits cholesterol absorption by blocking NPC1L1. The drug binds to the NPC1L1 receptor in the brush border membrane of enterocytes and prevents cholesterol uptake. Ezetimibe ketone has a high solubility in organic solvents such as dichloromethane or chloroform. It also has a high melting point, which makes it suitable for use on chromatographic columns.
    Formula:C24H19F2NO3
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:407.41 g/mol

    Ref: 3D-FE23217

    1g
    To inquire
    2g
    1,301.00€
    100mg
    341.00€
    250mg
    547.00€
    500mg
    719.00€
  • N-Nitroso dorzolamide


    <p>N-Nitroso dorzolamide is a chemical compound used as an intermediate in the synthesis of dorzolamide, a carbonic anhydrase inhibitor used in the treatment of glaucoma and ocular hypertension.</p>
    Formula:C10H15N3O5S3
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:353.44 g/mol

    Ref: 3D-IN182764

    1mg
    341.00€
    2mg
    486.00€
    5mg
    729.00€
    10mg
    1,036.00€
    25mg
    1,491.00€
  • Sdz 205-557 hydrochloride

    Controlled Product
    CAS:
    <p>Sdz 205-557 hydrochloride is a research and development compound that is used in the preparation of drug products and as an analytical reference standard. It has been synthesized by custom synthesis. Sdz 205-557 hydrochloride has been shown to have pharmacopoeia standards for purity, and it is a synthetic compound that does not occur naturally. Metabolism studies on this compound have been completed, and it was found to be metabolized through oxidation, hydroxylation, or deamination.</p>
    Formula:C14H21ClN2O3•HCl
    Purity:Min. 95%
    Color and Shape:Powder
    Molecular weight:337.24 g/mol

    Ref: 3D-XXB33402

    1mg
    233.00€
    2mg
    341.00€
    5mg
    486.00€
    10mg
    748.00€
    25mg
    1,085.00€
  • Amlodipine EP Impurity E maleate

    CAS:
    <p>Amlodipine EP Impurity E maleate is a high purity and analytical grade chemical. It is a metabolite of Amlodipine, which is used in the treatment of hypertension. This chemical has been shown to be a natural product that is produced by the human body. It also has been shown to have pharmacological properties, such as anti-inflammatory and vasodilatory effects. The impurity standard for this compound is available from Sigma-Aldrich.br&gt;br&gt;</p>
    Formula:C21H27ClN2O5•C4H4O4
    Purity:Min. 95%
    Molecular weight:538.98 g/mol

    Ref: 3D-IA182776

    25mg
    182.00€
    50mg
    305.00€
    100mg
    478.00€
    250mg
    835.00€
    500mg
    1,302.00€